Collective excitations of trapped Bose-Einstein condensates in the energy and time domains

A time-dependent method for calculating the collective excitation frequencies and densities of a trapped, inhomogeneous Bose-Einstein condensate with circulation is presented. The results are compared with time-independent solutions of the Bogoliubov-de Gennes equations. The method is based on time-dependent linear-response theory combined with spectral analysis of moments of the excitation modes of interest. The technique is straightforward to apply, extremely efficient in our implementation with parallel fast Fourier transform methods, and produces highly accurate results. For high dimensionality or low symmetry the time-dependent approach is a more practical computational scheme and produces accurate and reliable data. The method is suitable for general trap geometries, condensate flows and condensates permeated with defects and vortex structures.

Time-Resolved Resonance Raman Spectroscopy: Exploring Reactive Intermediates

The study of reaction mechanisms involves systematic investigations of the correlation between structure, reactivity, and time. The challenge is to be able to observe the chemical changes undergone by reactants as they change into products via one or several intermediates such as electronic excited states (singlet and triplet), radicals, radical ions, carbocations, carbanions, carbenes, nitrenes, nitrinium ions, etc. The vast array of intermediates and timescales means there is no single ``do-it-all'' technique. The simultaneous advances in contemporary time-resolved Raman spectroscopic techniques and computational methods have done much towards visualizing molecular fingerprint snapshots of the reactive intermediates in the microsecond to femtosecond time domain. Raman spectroscopy and its sensitive counterpart resonance Raman spectroscopy have been well proven as means for determining molecular structure, chemical bonding, reactivity, and dynamics of short-lived intermediates in solution phase and are advantageous in comparison to commonly used time-resolved absorption and emission spectroscopy. Today time-resolved Raman spectroscopy is a mature technique; its development owes much to the advent of pulsed tunable lasers, highly efficient spectrometers, and high speed, highly sensitive multichannel detectors able to collect a complete spectrum. This review article will provide a brief chronological development of the experimental setup and demonstrate how experimentalists have conquered numerous challenges to obtain background-free (removing fluorescence), intense, and highly spectrally resolved Raman spectra in the nanosecond to microsecond (ns-mu s) and picosecond (ps) time domains and, perhaps surprisingly, laid the foundations for new techniques such as spatially offset Raman spectroscopy.

A common rule for integration and suppression of luminance contrast across eyes, space, time, and pattern

Visual perception begins by dissecting the retinal image into millions of small patches for local analyses by local receptive fields. However, image structures extend well beyond these receptive fields and so further processes must be involved in sewing the image fragments back together to derive representations of higher order (more global) structures. To investigate the integration process, we also need to understand the opposite process of suppression. To investigate both processes together, we measured triplets of dipper functions for targets and pedestals involving interdigitated stimulus pairs (A, B). Previous work has shown that summation and suppression operate over the full contrast range for the domains of ocularity and space. Here, we extend that work to include orientation and time domains. Temporal stimuli were 15-Hz counter-phase sine-wave gratings, where A and B were the positive and negative phases of the oscillation, respectively. For orientation, we used orthogonally oriented contrast patches (A, B) whose sum was an isotropic difference of Gaussians. Results from all four domains could be understood within a common framework in which summation operates separately within the numerator and denominator of a contrast gain control equation. This simple arrangement of summation and counter-suppression achieves integration of various stimulus attributes without distorting the underlying contrast code.

Wave propagation analysis in carbon nanotube embedded composite using wavelet based spectral finite elements

In this paper, elastic wave propagation is studied in a nanocomposite reinforced with multiwall carbon nanotubes (CNTs). Analysis is performed on a representative volume element of square cross section. The frequency content of the exciting signal is at the terahertz level. Here, the composite is modeled as a higher order shear deformable beam using layerwise theory, to account for partial shear stress transfer between the CNTs and the matrix. The walls of the multiwall CNTs are considered to be connected throughout their length by distributed springs, whose stiffness is governed by the van der Waals force acting between the walls of nanotubes. The analyses in both the frequency and time domains are done using the wavelet-based spectral finite element method (WSFEM). The method uses the Daubechies wavelet basis approximation in time to reduce the governing PDE to a set of ODEs. These transformed ODEs are solved using a finite element (FE) technique by deriving an exact interpolating function in the transformed domain to obtain the exact dynamic stiffness matrix. Numerical analyses are performed to study the spectrum and dispersion relations for different matrix materials and also for different beam models. The effects of partial shear stress transfer between CNTs and matrix on the frequency response function (FRF) and the time response due to broadband impulse loading are investigated for different matrix materials. The simultaneous existence of four coupled propagating modes in a double-walled CNT-composite is also captured using modulated sinusoidal excitation.

Synthesis and nonlinear optical properties of Lead Telluride nanorods

Lead Telluride (PbTe) nanorods have been uniformly grown on silicon substrates, using the thermal evaporation technique under high vacuum conditions. The structural and morphological studies are done using X-ray diffraction and scanning electron microscopy. Optical nonlinearity studies using the open aperture z-scan employing 5 ns and 100 fs laser pulses reveal a three-photon type absorption. For nanosecond excitation the nonlinear absorption coefficients (gamma) are in the order of 10(-22) m(3) W-2 and for femtosecond excitation it is in the order of 10(-29) m(3) W-2. The role of free carriers and excitons in causing the nonlinearity in both excitation time domains is discussed. Results indicate that PbTe nanorods are good optical limiters with potential device applications. (C) 2011 Elsevier B.V. All rights reserved.

Deviated linear cyclic pursuit

This paper analyses deviated linear cyclic pursuit in which an agent pursues its leader with an angle of deviation in both the continuous- and discrete-time domains, while admitting heterogeneous gains and deviations for the agents. Sufficient conditions for the stability of such systems, in both the domains, are presented in this paper along with the derivation of the reachable set, which is a set of points where the agents may converge asymptotically. The stability conditions are derived based on Gershgorin's theorem. Simulations validating the theoretical results presented in this paper are provided.

基于电光调制的激光光谱整形技术

提出了一种新型的基于电光调制的激光光谱整形方案，该整形技术可以减轻啁啾脉冲放大系统中的增益窄化效应。傅立叶变换限的宽带种子激光脉冲通过光学展宽器线性展宽后，耦合到加载有整形电脉冲的集成波导调制器中进行整形，整形电脉冲由孔径耦合带状线电脉冲发生器产生。由于线性啁啾脉冲时间-频率的直接对应关系，在时域内对宽带种子激光脉冲整形，其光谱也得到了同样形状的整形。模拟了整形光谱形状，相应的整形电脉冲波形，分析了该整形技术的光谱整形分辨率，以及整形过程中引入的相位畸变。

Shock transmission and eigenvalue veering within a coupled system.

The operation of dynamical systems in harsh environments requires continuous monitoring. Internal sensors may be used to monitor the conditions in real time. A typical example is the sensor and electronic components used in space structures which, especially during launch, are subject to huge g force. The paper will present an experimental and theoretical study on a simplified model used to analyze the possible cause of high acceleration on the enclosed sensors and equipments due to impulsive loading. The model system consists of two beams coupled using compliant connections. An impulse hammer excites one beam, and vibrations are transmitted to the indirectly driven beam. A theoretical model is developed using a Rayleigh-Ritz approach and validated using experimental results in both the frequency and time domains. Monto Carlo simulation was done with random masses positioned on the indirectly driven beam to determine the worst-case conditions for maximum peak acceleration. Highest acceleration levels were found when mode matching in the two beams led to veering behavior in the coupled modes. The results suggest guidelines for the detailed design of internal components of a structure exposed to shock loading from its environment. [The authors thank Schlumberger Cambridge Research for financial support.].

The partially reversible formation of Li-metal particles on a solid Li electrolyte:applications toward nanobatteries

The feasibility of large-scale implementation of Li-air batteries (LABs) hinges on understanding the thermodynamic and kinetic factors that control charge-discharge rates, efficiency and life times. Here, the kinetics of bias-induced reactions is explored locally on the surface of Li-ion conductive glass ceramics, a preferred electrolyte for LABs, using direct current-voltage and strain spectroscopies. Above a critical bias, particle growth kinetics were found to be linear in both the bias and time domains. Partial reversibility was observed for Li particles as evidenced by the presence of anodic peaks following the Li(+) reduction, as well an associated reduction in particle height. The degree of reversibility was highest for the smallest particles formed. These observations thus suggest the possibility of producing nanobatteries with an active anode volume of the order of 0.1 al.

Analysis of multirate behavior in electronic systems

Esta tese insere-se na área da simulação de circuitos de RF e microondas, e visa o estudo de ferramentas computacionais inovadoras que consigam simular, de forma eficiente, circuitos não lineares e muito heterogéneos, contendo uma estrutura combinada de blocos analógicos de RF e de banda base e blocos digitais, a operar em múltiplas escalas de tempo. Os métodos numéricos propostos nesta tese baseiam-se em estratégias multi-dimensionais, as quais usam múltiplas variáveis temporais definidas em domínios de tempo deformados e não deformados, para lidar, de forma eficaz, com as disparidades existentes entre as diversas escalas de tempo. De modo a poder tirar proveito dos diferentes ritmos de evolução temporal existentes entre correntes e tensões com variação muito rápida (variáveis de estado activas) e correntes e tensões com variação lenta (variáveis de estado latentes), são utilizadas algumas técnicas numéricas avançadas para operar dentro dos espaços multi-dimensionais, como, por exemplo, os algoritmos multi-ritmo de Runge-Kutta, ou o método das linhas. São também apresentadas algumas estratégias de partição dos circuitos, as quais permitem dividir um circuito em sub-circuitos de uma forma completamente automática, em função dos ritmos de evolução das suas variáveis de estado. Para problemas acentuadamente não lineares, são propostos vários métodos inovadores de simulação a operar estritamente no domínio do tempo. Para problemas com não linearidades moderadas é proposto um novo método híbrido frequência-tempo, baseado numa combinação entre a integração passo a passo unidimensional e o método seguidor de envolvente com balanço harmónico. O desempenho dos métodos é testado na simulação de alguns exemplos ilustrativos, com resultados bastante promissores. Uma análise comparativa entre os métodos agora propostos e os métodos actualmente existentes para simulação RF, revela ganhos consideráveis em termos de rapidez de computação.

Análise e implementação de filtros e controladores num sistema de processamento digital de sinal

Dissertação para obtenção do grau de Mestre em Engenharia Electrotécnica Ramo de Automação e Electrónica Industrial

Utilisation du concept de connectivité en hydrologie : définitions, approches expérimentales et éléments de modélisation

Alors que certains mécanismes pourtant jugés cruciaux pour la transformation de la pluie en débit restent peu ou mal compris, le concept de connectivité hydrologique a récemment été proposé pour expliquer pourquoi certains processus sont déclenchés de manière épisodique en fonction des caractéristiques des événements de pluie et de la teneur en eau des sols avant l’événement. L’adoption de ce nouveau concept en hydrologie reste cependant difficile puisqu’il n’y a pas de consensus sur la définition de la connectivité, sa mesure, son intégration dans les modèles hydrologiques et son comportement lors des transferts d’échelles spatiales et temporelles. Le but de ce travail doctoral est donc de préciser la définition, la mesure, l’agrégation et la prédiction des processus liés à la connectivité hydrologique en s’attardant aux questions suivantes : 1) Quel cadre méthodologique adopter pour une étude sur la connectivité hydrologique ?, 2) Comment évaluer le degré de connectivité hydrologique des bassins versants à partir de données de terrain ?, et 3) Dans quelle mesure nos connaissances sur la connectivité hydrologique doivent-elles conduire à la modification des postulats de modélisation hydrologique ? Trois approches d’étude sont différenciées, soit i) une approche de type « boite noire », basée uniquement sur l’exploitation des données de pluie et de débits sans examiner le fonctionnement interne du bassin versant ; ii) une approche de type « boite grise » reposant sur l’étude de données géochimiques ponctuelles illustrant la dynamique interne du bassin versant ; et iii) une approche de type « boite blanche » axée sur l’analyse de patrons spatiaux exhaustifs de la topographie de surface, la topographie de subsurface et l’humidité du sol. Ces trois approches sont ensuite validées expérimentalement dans le bassin versant de l’Hermine (Basses Laurentides, Québec). Quatre types de réponses hydrologiques sont distingués en fonction de leur magnitude et de leur synchronisme, sachant que leur présence relative dépend des conditions antécédentes. Les forts débits enregistrés à l’exutoire du bassin versant sont associés à une contribution accrue de certaines sources de ruissellement, ce qui témoigne d’un lien hydraulique accru et donc d’un fort degré de connectivité hydrologique entre les sources concernées et le cours d’eau. Les aires saturées couvrant des superficies supérieures à 0,85 ha sont jugées critiques pour la genèse de forts débits de crue. La preuve est aussi faite que les propriétés statistiques des patrons d’humidité du sol en milieu forestier tempéré humide sont nettement différentes de celles observées en milieu de prairie tempéré sec, d’où la nécessité d’utiliser des méthodes de calcul différentes pour dériver des métriques spatiales de connectivité dans les deux types de milieux. Enfin, la double existence de sources contributives « linéaires » et « non linéaires » est mise en évidence à l’Hermine. Ces résultats suggèrent la révision de concepts qui sous-tendent l’élaboration et l’exécution des modèles hydrologiques. L’originalité de cette thèse est le fait même de son sujet. En effet, les objectifs de recherche poursuivis sont conformes à la théorie hydrologique renouvelée qui prône l’arrêt des études de particularismes de petite échelle au profit de l’examen des propriétés émergentes des bassins versants telles que la connectivité hydrologique. La contribution majeure de cette thèse consiste ainsi en la proposition d’une définition unifiée de la connectivité, d’un cadre méthodologique, d’approches de mesure sur le terrain, d’outils techniques et de pistes de solution pour la modélisation des systèmes hydrologiques.

By indirections find directions out : thinkable worlds in Abbott and Vonnegut

This thesis is concerned with the interaction between literature and abstract thought. More specifically, it studies the epistemological charge of the literary, the type of knowledge that is carried by elements proper to fictional narratives into different disciplines. By concentrating on two different theoretical methods, the creation of thought experiments and the framing of possible worlds, methods which were elaborated and are still used today in spheres as varied as modal logics, analytic philosophy and physics, and by following their reinsertion within literary theory, the research develops the theory that both thought experiments and possible worlds are in fact short narrative stories that inform knowledge through literary means. By using two novels, Abbott’s Flatland and Vonnegut’s The Sirens of Titan, that describe extra-dimensional existence in radically different ways, respectively as a phenomenologically unknowable space and as an outward perspective on time, it becomes clear that literature is constitutive of the way in which worlds, fictive, real or otherwise, are constructed and understood. Thus dimensions, established through extensional analogies as either experimental knowledge or modal possibility for a given world, generate new directions for thought, which can then take part in the inductive/deductive process of scientia. By contrasting the dimensions of narrative with the way that dimensions were historically constituted, the research also establishes that the literary opens up an infinite potential of abstract space-time domains, defined by their specific rules and limits, and that these different experimental folds are themselves partaking in a dimensional process responsible for new forms of understanding. Over against science fiction literary theories of speculation that posit an equation between the fictive and the real, this thesis examines the complex structure of many overlapping possibilities that can organise themselves around larger compossible wholes, thus offering a theory of reading that is both non-mimetic and non-causal. It consequently examines the a dynamic process whereby literature is always reconceived through possibilities actualised by reading while never defining how the reader will ultimately understand the overarching structure. In this context, the thesis argues that a causal story can be construed out of any one interaction with a given narrative—underscoring, for example, the divinatory strength of a particular vision of the future—even as this narrative represents only a fraction of the potential knowledge of any particular literary text. Ultimately, the study concludes by tracing out how novel comprehensions of the literary, framed by the material conditions of their own space and time, endlessly renew themselves through multiple interactions, generating analogies and speculations that facilitate the creation of new knowledge.

Investigations on the Radiation Characteristics of Planar Printed UWB Antennas With Modified Ground Planes

A major challenge in the transmission of narrow pulses is the radiation characteristics of the antenna. Designing the front ends for UWB systems pose challenges compared to their narrow and wide band counterparts because in addition to having electrically small size, high efficiency and band width, the antenna has to have excellent transient response. The present work deals with the design of four novel antenna designs- Square Monopole, Semi-Elliptic Slot, Step and Linear Tapered slot - and an assay on their suitability in UWB Systems. Multiple resonances in the geometry are matched to UWB by redesigning the ground-patch interfaces. Techniques to avoid narrow band interference is proposed in the antenna level and their effect on a nano second pulse have also been investigated. The thesis proposes design guidelines to design the antenna on laminates of any permittivity and the analyzes are complete with results in the frequency and time domains.

Modeling Robot Dynamic Performance for Endpoint Force Control

This research aims to understand the fundamental dynamic behavior of servo-controlled machinery in response to various types of sensory feedback. As an example of such a system, we study robot force control, a scheme which promises to greatly expand the capabilities of industrial robots by allowing manipulators to interact with uncertain and dynamic tasks. Dynamic models are developed which allow the effects of actuator dynamics, structural flexibility, and workpiece interaction to be explored in the frequency and time domains. The models are used first to explain the causes of robot force control instability, and then to find methods of improving this performance.