EVALUATING VIBRATIONS ON A SMALL-SCALE MODEL OF A TIMBER FOOTBRIDGE

In Brazil, the study of pedestrian-induced vibration on footbridges has been undertaken since the early 1990s, for concrete and steel footbridges. However, there are no recorded studies of this kind for timber footbridges. Brazilian code ABNT NBR 7190 (1997) gives design requirements only for static loads in the case of timber footbridges, without considering the serviceability limit state from pedestrian-induced vibrations. The aim of this work is to perform a theoretical dynamic, numerical and experimental analysis on simply-supported timber footbridges, by using a small-scale model developed from a 24 m span and 2 m width timber footbridge, with two main timber beams. Span and width were scaled down (1:4) to 6 m e 0.5 in, respectively. Among the conclusions reached herein, it is emphasized that the Euler-Bernoulli beam theory is suitable for calculating the vertical and lateral first natural frequencies in simply-supported timber footbridges; however, special attention should be given to the evaluation of lateral bending stiffness, as it leads to conservative values.

Passarela estaiada com tabuleiro de madeira laminada protendida em módulos curvos

É inegável a importância do desenvolvimento de tecnologias de uso racional da madeira e de solução de problemas de transportes em nossas cidades, principalmente por causa do processo crescente de urbanização do mundo. Existe também, a necessidade estética de se unir à alta tecnologia, o belo. As passarelas estaiadas com tabuleiro de madeira laminada protendida, em módulos curvos, atendem a todas estas exigências. A construção de um protótipo permitiu que a realização de ensaios estáticos e dinâmicos, cujos resultados evidenciaram a viabilidade técnica e econômica de passarelas estaiadas usando madeira de reflorestamento, de tabuleiros compostos apenas por placas de madeira laminada protendida e da construção de placas curvas de madeira laminada protendida. Também foi possível comprovar que as vibrações induzidas por pedestres são a condição mais crítica de projeto. A investigação da perda de curvatura do tabuleiro demonstrou o sucesso do projeto, embora mais estudos ao longo do tempo sejam necessários. Baseando-se nos resultados experimentais, realizou-se a calibração do modelo numérico, que permitiu realizar simulações para determinar quais variáveis definem a resposta da passarela construída. Sugestões de procedimentos de elaboração e construção de passarelas, assim como de criação de norma brasileira específica para pontes e passarelas de madeira, são apresentadas.

Theoretical and experimental study of the thermal degradation of Eucalyptus timber

Thermal action on timber causes it to degrade through combustion of its chemical components, which leads to the release of vapors, combustible gases and surface char. This diminishes its load capacity, due to the reduction of its cross section by charring and to changes in its mechanical properties of strength and stiffness as a function of its exposure to high temperatures. This paper reports the charring rates observed on Eucalyptus structural beams and presents a numerical and experimental study of the behavior of these beams when exposed to fire, in which the properties of strength and stiffness were evaluated as a function of rising temperatures, allowing an analysis of the effect of the section factor on the internal rise in temperature of structural Eucalyptus beams.

Measuring Dynamic Oscillations of a Small Span Cable-Stayed Footbridge: Case Study Using L1 GPS Receivers

Highly redundant or statically undetermined structures, such as a cable-stayed bridge, have been of particular concern to the engineering community nowadays because of the complex parameters that must be taken into account for healthy monitoring. The purpose of this study was to verify the reliability and practicability of using GPS to characterize dynamic oscillations of small span bridges. The test was carried out on a cable-stayed wood footbridge at Escola de Engenharia de Sao Carlos-Universidade de Sao Paulo, Brazil. Initially a static load trial was carried out to get an idea of the deck amplitude and oscillation frequency. After that, a calibration trial was carried out by applying a well known oscillation on the rover antenna to check the environment detectable limits for the method used. Finally, a dynamic load trial was carried out by using GPS and a displacement transducer to measure the deck oscillation. The displacement transducer was used just to confirm the results obtained by the GPS. The results have shown that the frequencies and amplitude displacements obtained by the GPS are in good agreement with the displacement transducer responses. GPS can be used as a reliable tool to characterize the dynamic behavior of large structures such as cable-stayed footbridges undergoing dynamic loads.

How rare is too rare to harvest? Management challenges posed by timber species occurring at low densities in the Brazilian Amazon

Tropical forests are characterized by diverse assemblages of plant and animal species compared to temperate forests. Corollary to this general rule is that most tree species, whether valued for timber or not, occur at low densities (<1 adult tree ha(-1)) or may be locally rare. In the Brazilian Amazon, many of the most highly valued timber species occur at extremely low densities yet are intensively harvested with little regard for impacts on population structures and dynamics. These include big-leaf mahogany (Swietenia macrophylla), ipe (Tabebuia serratifolia and Tabebuia impetiginosa), jatoba (Hymenaea courbaril), and freijo cinza (Cordia goeldiana). Brazilian forest regulations prohibit harvests of species that meet the legal definition of rare - fewer than three trees per 100 ha - but treat all species populations exceeding this density threshold equally. In this paper we simulate logging impacts on a group of timber species occurring at low densities that are widely distributed across eastern and southern Amazonia, based on field data collected at four research sites since 1997, asking: under current Brazilian forest legislation, what are the prospects for second harvests on 30-year cutting cycles given observed population structures, growth, and mortality rates? Ecologically `rare` species constitute majorities in commercial species assemblages in all but one of the seven large-scale inventories we analyzed from sites spanning the Amazon (range 49-100% of total commercial species). Although densities of only six of 37 study species populations met the Brazilian legal definition of a rare species, timber stocks of five of the six timber species declined substantially at all sites between first and second harvests in simulations based on legally allowable harvest intensities. Reducing species-level harvest intensity by increasing minimum felling diameters or increasing seed tree retention levels improved prospects for second harvests of those populations with a relatively high proportion of submerchantable stems, but did not dramatically improve projections for populations with relatively flat diameter distributions. We argue that restrictions on logging very low-density timber tree populations, such as the current Brazilian standard, provide inadequate minimum protection for vulnerable species. Population declines, even if reduced-impact logging (RIL) is eventually adopted uniformly, can be anticipated for a large pool of high-value timber species unless harvest intensities are adapted to timber species population ecology, and silvicultural treatments are adopted to remedy poor natural stocking in logged stands. (C) 2008 Elsevier B.V. All rights reserved.

Timber-framed windows, C House, Coorparoo, Brisbane

Windows to North-East elevation, looking onto pool deck.

Timber shutter, Sunshine Beach House, Sunshine Coast

Detail view through timber shutter as seen from interior.

Timber shutter, Sunshine Beach House, Sunshine Coast

Detailed view though timber shutter as seen from interior.

Timber shutters, Sunshine Beach House, Sunshine Coast

View of timber shutters as seen from interior.

Timber cross-bracing, Mooloomba House, Point Lookout, North Stradbroke Island

Detail view of timber cross-bracing with polycarbonate sheeting behind as seen from upper level dining studio.

Timber cross-bracing, Mooloomba House, Point Lookout, North Stradbroke Island

Detail view of timber cross-bracing to dining studio, as seen from upper living area.

Timber cross-bracing, Mooloomba House, Point Lookout, North Stradbroke Island

Detail view of timber cross-bracing with polycarbonate sheeting behind as seen from upper level dining studio.

Timber batten screen to north-east elevation, Sunshine Coast University Library, Maroochydore

View of timber batten screen to verandah behind and entrance stair, as seen from exterior.

Timber-framed windows, Powell House, Noosa River, Sunshine Coast

Folding timber windows and roof over.