Modelagem do crescimento e produção em povoamentos desbastados de Eucalyptus grandis

The aim of the study was to develop a system of growth and yield models for thinned stands of Eucalyptus spp.; and to assess the behavior of the growth in scenarios with 10% decrease or increase in rainfall. The probability distribution functions Weibull 2 and 3 parameters and Johnson SB for different methods were fitted. Correlation between the fitted parameters with age was evaluated. Dominant height growth behavior was evaluated to check if thinned stand changes its growth when compared to a non-thinned stands. The stand variables dominant height and basal area were projected and simultaneously predicted and projected, respectively. Individual tree equations were fitted, which were fitted as functions of stand level variables in order to decrease the error propagation. R software was used to fit all the proposed models and consequently all the fitted models were evaluated by their parameters significance (F-test) and graphs of predicted values in relation to the observed values around the 1:1 line. Thus, the prognosis system was made by two ways, first one using the full data set, and for the second one the dataset was restricted at age 7.5. Increase and decrease in 20% of rainfall were assessed by updating the site index function. Method of moments was the most precise to describe the diameter distribution for every age in eucalyptus stands for Johnson SB and Weibull 2 parameters pdfs. When observed for each pdf the correlation for their fitted parameters with age, we noticed that shape parameters for a thinned stand were no longer correlated with age, differently of non-thinned stands. Thus, thinning effect was accounted in the basal area prediction and projection modeling. This result emphasized the necessity of applying the Parameter Recovery method in order to assess differences and capture the right pattern for thinned and non-thinned stands in the future. Dominant height was not influenced by thinning intensity. Therefore the fitted Chapman-Richards model did not account for a stand being thinned or not. All the fitted equations behaved with good precision, no matter using full or precocious dataset. The prognosis system using full and/or precocious date set was evaluated for when using Parameter Recovery method for Sb and Weibull pdfs, and by then, graphical analysis and precision statistics showed appropriated results. Finally, the increase or decrease in rainfall regime were observed for eucalyptus stand yields and we may notice how important is to observe this effect, since the growth pattern is strictly affected by water.

Stand Structure Governs the Crown Collisions of Lodgepole Pine

We investigated tree sway and crown collision behavior of even-aged lodgepole pine (Pinus contorta Dougl. ex Loud. var. latifolia Engelm.) stands of different structure in Alberta, Canada, to examine how these factors might affect loss of leaf area as stands mature. The Two Creeks stand (TC) had high density and slender trees, while the Chickadee stand (CH) had stout trees. The TC stand was then thinned (TCT) to reduce the stand density. For each stand, simultaneous tree sways of a group of 10 trees were monitored with biaxial clinometers during wind speed of 5 m/s (canopy top). Crown collisions were reconstructed by combining sway displacement of individual trees with their respective crown dimensions. Comparing the sway statistics between stands with contrasting mean bole slenderness (TC and CH) indicated that more slender trees have greater sway displacements, faster sway speeds, and a greater depth of collision. Disturbance by thinning increased sway displacements, sway speeds, and depth of collisions at TCT. Tree sway patterns were circular in shape and not aligned with wind direction, but patterns were elongated after thinning. This demonstrates the high frequency of crown collision experienced by stands with slender trees and supports the notion that crown collisions result in empty space between crowns of trees.

They also serve who only stand and wait

Purpose Waiting for service by customers is an important problem for many financial service marketers. Two new approaches are proposed. First, customer evaluation of the service is increased with an ambient scent. Second a cognitive variable is identified which different iates customers by the way they value time so that they can be segmented. Methodology Pretests included focus groups which highlighted financial services and a pilot test were foll owed by a main sample of 607 subjects. Structural equation modelling and multivariate analysis of covariance were used for analysis. Findings A cognitive variable, the need for time management can be used, together with demographic and customer net worth data, to segment a customer base. Two environmental interventions, music and scent, can increase customer satisfaction among customers kept waiting in a line. Research implications Two original approaches to a rapidly growing service marketing problem are identified. Practical implications Service contact points can reduce incidence of "queue rage" and enhance customer satisfaction by either or both of two simple modifications to the service environment or a preventive strategy of offering targeted customers an alternative. Originality A new method of segmentation and a new environmental intervention are proposed .

Australian Association for Exercise and Sport Science position stand : optimising cancer outcomes through exercise

Cancer represents a major public health concern in Australia. Causes of cancer are multifactorial with lack of physical activity being considered one of the known risk factors, particularly for breast and colorectal cancers. Participating in exercise has also been associated with benefits during and following treatment for cancer, including improvements in psychosocial and physical outcomes, as well as better compliance with treatment regimens, reduced impact of disease symptoms and treatment-related side effects, and survival benefits for particular cancers. The general exercise prescription for people undertaking or having completed cancer treatment is of low to moderate intensity, regular frequency (3-5 times/week) for at least 20 minutes per session, involving aerobic, resistance or mixed exercise types. Future work needs to push the boundaries of this exercise prescription, so that we can better understand what constitutes optimal, desirable and necessary frequency, duration, intensity and type, and how specific characteristics of the individual (e.g., age, cancer type, treatment, presence of specific symptoms) influence this prescription. What follows is a summary of the cancer and exercise literature, in particular the purpose of exercise following diagnosis of cancer, the potential benefits derived by cancer patients and survivors from participating in exercise programs, and exercise prescription guidelines and contraindications or considerations for exercise prescription with this special population. This report represents the position stand of the Australian Association of Exercise and Sport Science on exercise and cancer recovery and has the purpose of guiding Accredited Exercise Physiologists in their work with cancer patients.

Active buildings : what can we do about buildings that simply stand still?

This paper presents background of our research and result of our pilot study to find methods for convincing building users to become active building participants. We speculate this is possible by allowing and motivating users to customise and manage their own built environments. The ultimate aim of this research is to develop open, flexible and adaptive systems that bring awareness to building users to the extent they recognise spaces are for them to change rather than accept spaces are fixed and they are the ones to adapt. We argue this is possible if the architectural hardware is designed to adapt to begin with and more importantly if there are appropriate user interfaces that are designed to work with the hardware. A series of simple prototypes were made to study possibilities through making, installing and experiencing them. Ideas discussed during making and experiencing of prototypes were evaluated to generate further ideas. This method was very useful to speculate unexplored and unknown issues with respect to developing user interfaces for active buildings.

Sit versus stand : can sitting be accurately identified using MTI accelerometer data?

High levels of sitting have been linked with poor health outcomes. Previously a pragmatic MTI accelerometer data cut-point (100 count/min-1) has been used to estimate sitting. Data on the accuracy of this cut-point is unavailable. PURPOSE: To ascertain whether the 100 count/min-1 cut-point accurately isolates sitting from standing activities. METHODS: Participants fitted with an MTI accelerometer were observed performing a range of sitting, standing, light & moderate activities. 1-min epoch MTI data were matched to observed activities, then re-categorized as either sitting or not using the 100 count/min-1 cut-point. Self-report demographics and current physical activity were collected. Generalized estimating equation for repeated measures with a binary logistic model analyses (GEE), corrected for age, gender and BMI, were conducted to ascertain the odds of the MTI data being misclassified. RESULTS: Data were from 26 healthy subjects (8 men; 50% aged <25 years; mean BMI (SD) 22.7(3.8)m/kg2). MTI sitting and standing data mode was 0 count/min-1, with 46% of sitting activities and 21% of standing activities recording 0 count/min-1. The GEE was unable to accurately isolate sitting from standing activities using the 100 count/min-1 cut-point, since all sitting activities were incorrectly predicted as standing (p=0.05). To further explore the sensitivity of MTI data to delineate sitting from standing, the upper 95% confidence interval of the mean for the sitting activities (46 count/min-1) was used to re-categorise the data; this resulted in the GEE correctly classifying 49% of sitting, and 69% of standing activities. Using the 100 count/min-1 cut-point the data were re-categorised into a combined ‘sit/stand’ category and tested against other light activities: 88% of sit/stand and 87% of light activities were accurately predicted. Using Freedson’s moderate cut-point of 1952 count/min-1 the GEE accurately predicted 97% of light vs. 90% of moderate activities. CONCLUSION: The distributions of MTI recorded sitting and standing data overlap considerably, as such the 100 count/min -1 cut-point did not accurately isolate sitting from other static standing activities. The 100 count/min -1 cut-point more accurately predicted sit/stand vs. other movement orientated activities.

United we stand, divided we fall: the failure of an accounting information system in a major radiology provider

This article explores the way in which a major Australian radiology organization implemented a complex accounting information system and how workers in the 72 radiology practises that had to use it resisted the change. The study reports on the issues that led to the circumvention of the system by individuals and, after only three years, complete withdrawal of the accounting information system by the parent organization. This article has implications for firms in the health care and other sectors considering implementing new accounting information systems. Organizations need to incorporate change management techniques and provide open communication to all stakeholders to minimize disruption and potential problems.

Challenges to environmental toxicology and epidemiology : where do we stand and which way do we go?

Modern toxicology investigates a wide array of both old and new health hazards. Priority setting is needed to select agents for research from the plethora of exposure circumstances. The changing societies and a growing fraction of the aged have to be taken into consideration. A precise exposure assessment is of importance for risk estimation and regulation. Toxicology contributes to the exploration of pathomechanisms to specify the exposure metrics for risk estimation. Combined effects of co-existing agents are not yet sufficiently understood. Animal experiments allow a separate administration of agents which can not be disentangled by epidemiological means, but their value is limited for low exposure levels in many of today’s settings. As an experimental science, toxicology has to keep pace with the rapidly growing knowledge about the language of the genome and the changing paradigms in cancer development. During the pioneer era of assembling a working draft of the human genome, toxicogenomics has been developed. Gene and pathway complexity have to be considered when investigating gene–environment interactions. For a best conduct of studies, modern toxicology needs a close liaison with many other disciplines like epidemiology and bioinformatics.

Archimedes, aid/watch, constitutional levers and where we now stand

Significant reform of the laws regulating charities is under way in Australia. The reforms cover almost every facet of the relationship between charities and government and the process has brought to the surface different assumptions about the role of charities in society, their entitlement to fiscal and other privileges and the scope and nature of regulation that can or should be imposed on the charities. This paper explores these broader issues in the context of the Aid/Watch case, involving an organisation used by citizens to challenge the State. Such organisations occupy contested space as to what does and does not constitute a charity. Accordingly the case provides a useful perspective from which to consider the broader issues in the relationship between government and charity. This paper seeks to build on the contribution made by other academics, by exploring the constitutional significance of political purposes and drawing from philosophy to provide context and meaning to potentially significant aspects of the judgment that might be missed when it is analysed only in terms of legal precedent through the narrow lens of the existing four heads of charity. Revenue implications for taxation of charities and political parties are also considered and it is suggested that in practice, if not in theory, the fence between them has come down.

One night stand : only you

Technical: This looped video work is made up from a number of still images animated in a sequence, not intended to be a smooth action, but syncopated. The gaps in real time suggest blinking, lapses in technology, warps in time and distance. The still images have been manipulated in photoshop and imported into an animation software program, showing subtle emphasis on various aspects of the features of the face and location from the screen shots. Content: Obsession is one of the most constant expressions of love, whether it is a negative attribute, such as stalking, or the need to see or stroke the beloved, or telling and re-telling the story of first meeting. “like the beat, beat, beat of the tom tom when the jungle shadows fall like the tick, tick, tock of the stately clock as it stands against the wall like the drip, drip drip of the rain drops when the summer shower’s through a voice within me keeps repeating you, you, you… only you...” (Cole Porter, Night and Day) My desire to immerse myself in my newly-met adult daughter as a reality is as obsessive as any new parent. The primary means of contact is video cam, which has become a kind of surveillance for me. I stare at her mouth as it moves, her ear as she moves her head, her smile, her grimaces, her high cheekbones, her eyes that are like mine, the shape of her head, her teeth that are like her father’s… hundreds of candid pictures screen shot over a year and a half were the source of the video images.

Mitigation of distorted and unbalanced stator voltage of stand-alone doubly fed induction generators using repetitive control technique

Unbalanced or non-linear loads result in distorted stator currents and electromagnetic torque pulsations in stand-alone doubly fed induction generators (DFIGs). This study proposes the use of a proportional-integral repetitive control (PIRC) scheme so as to mitigate the levels of harmonic and unbalance at the stator terminals of the DFIG. The PIRC is structurally simpler and requires much less computation than existing methods. Analysis of the PIRC operation and the methodology to determine the control parameters is included. Simulation study as well as laboratory test measurements demonstrate clearly the effectiveness of the proposed PIRC control scheme.