Design of redox/radical sensing molecules via Nitrile Imine-Mediated Tetrazole-ene Cycloaddition (NITEC)

The current study introduces a novel synthetic avenue for the preparation of profluorescent nitroxides via nitrile imine-mediated tetrazole-ene cycloaddition (NITEC). The photoinduced cycloaddition was performed under metal-free, mild conditions allowing the preparation of a library of the nitroxide functionalized pyrazolines and corresponding methoxyamines. High reaction rates and full conversion were observed, with the presence of the nitroxide having no significant impact on the cycloaddition performance. The formed products were investigated with respect to their photophysical properties in order to quantify their “switch on/off” behavior. The fluorescence quenching performance is strongly dependent on the distance between the chromophore and the free radical spin as demonstrated theoretically and experimentally. Highest levels of fluorescence quenching were achieved for pyrazolines with the nitroxide directly fused to the chromophore. Importantly, the pyrazoline profluorescent nitroxides were shown to efficiently act as sensors for redox/radical processes.

Mixed Azide and 5-(Pyrimidyl)tetrazole Bridged Co(II)/Mn(II) Polymers: Synthesis, Crystal Structures, Ferroelectric and Magnetic Behavior

The reaction of pyrimidine-2-carbonitrile, NaN3 in the presence of Co(NO3)(2)center dot 6H(2)O or MnCl2 center dot 4H(2)O leads to the formation of complexes Co(pmtz)(mu(1,3)-N-3)(H2O)](n) (1) and Mn(pmtz)(mu(1,3)-N-3)(H2O)](n) (2) respectively, under hydrothermal condition pmtz =5-(pyrimidyl)tetrazolate]. These two complexes have been fully characterized by single crystal X-ray diffraction. Complex 1 crystallizes in a non-centrosymmetric space group Aba2 in the orthorhombic system and is found to exhibit ferroelectric behavior, whereas complex 2 crystallizes in the P2(1)/c space group in the monoclinic system. Variable temperature magnetic characterizations in the temperature range of 2-300 K indicate that complex 1 is a canted antiferromagnet (weak ferromagnet) with T-c = 15.9 K. Complex 1 represents a unique example of a multiferroic coordination polymer containing tetrazole as a co-ligand. Complex 2 is a one-dimensional chain of Mn(II) bridged by a well-known antiferromagnetic coupler end-to-end azido ligand. In contrast to the role played by the end-to-end azido pathway in most of the transition metal complexes, complex 2 showed unusual ferromagnetic behavior below 40 K because of spin canting.

A Facile Synthesis of 1,5-Disubstituted Tetrazole Peptidomimetics by Desulfurization/Electrocyclization of Thiopeptides

The cis-amide bond isostere, 1,5-disubstituted tetrazole,has been introduced in the peptide backbone by a simple route starting from the thiopeptide. The desired 1,5-disubstituted tetrazole peptidomimetics were synthesized by the desulfurization of thiopeptides by using HgCl2 in the presence of NaN3/TEA in DMF in good yields. Various other thiophilic reagents including hypervalent iodine reagents failed to deliver the tetrazole product with the exception of CBr4/PPh3, which resulted in moderate yields. The advantage of the present protocol over previous methods has been demonstrated by the selective insertion of tetrazole into peptide-thiopeptide hybrids. Also, the protocol is compatible with commonly employed urethane protecting groups (Fmoc, Boc, and Cbz) in peptide chemistry. Thiopeptide Boc-Pro-CSNH]-Val-OMe (2i) and two tetrazole peptidomimetics Cbz-Ala-CN4]-Phe-OMe (3d) and Boc-Pro-CN4]-Val-OMe (3i) were obtained as single crystals and their molecular structures have been confirmed by X-ray crystallography.

A homo-proline tetrazole as an improved organocatalyst for the asymmetric Michael addition of carbonyl compounds to nitro-olefins

A new homo-proline tetrazole derivative 7 has been prepared and shown to have improved properties for achieving asymmetric Michael addition of carbonyl compounds to nitro-olefins.

Photoclickable surfaces for profluorescent covalent polymer coatings

The nitrile imine-mediated tetrazole-ene cycloaddition reaction (NITEC) is introduced as a powerful and versatile conjugation tool to covalently ligate macromolecules onto variable (bio)surfaces. The NITEC approach is initiated by UV irradiation and proceeds rapidly at ambient temperature yielding a highly fluorescent linkage. Initially, the formation of block copolymers by the NITEC methodology is studied to evidence its efficacy as a macromolecular conjugation tool. The grafting of polymers onto inorganic (silicon) and bioorganic (cellulose) surfaces is subsequently carried out employing the optimized reaction conditions obtained from the macromolecular ligation experiments and evidenced by surface characterization techniques, including X-ray photoelectron spectroscopy and FT-IR microscopy. In addition, the patterned immobilization of variable polymer chains onto profluorescent cellulose is achieved through a simple masking process during the irradiation. Photoinduced nitrile imine-alkene 1,3-dipolar cycloaddition (NITEC) is employed to covalently bind well-defined polymers onto silicon oxide or cellulose. A diaryl tetrazole-functionalized molecule is grafted via silanization or amidification, respectively. Under UV light, a reactive nitrile imine rapidly forms and reacts with maleimide-functionalized polymers yielding a fluorescent linkage. Via a masking method, polymeric fluorescent patterns are achieved.

λ-orthogonal pericyclic macromolecular photoligation

A photochemical strategy enabling λ-orthogonal reactions is introduced to construct macromolecular architectures and to encode variable functional groups with site-selective precision into a single molecule by the choice of wavelength. λ-Orthogonal pericyclic reactions proceed independently of one another by the selection of functional groups that absorb light of specific wavelengths. The power of the new concept is shown by a one-pot reaction of equimolar quantities of maleimide with two polymers carrying different maleimide-reactive endgroups, that is, a photoactive diene (photoenol) and a nitrile imine (tetrazole). Under selective irradiation at λ=310–350 nm, any maleimide (or activated ene) end-capped compound reacts exclusively with the photoenol functional polymer. After complete conversion of the photoenol, subsequent irradiation at λ=270–310 nm activates the reaction of the tetrazole group with functional enes. The versatility of the approach is shown by λ-orthogonal click reactions of complex maleimides, functional enes, and polymers to the central polymer scaffold.

A thermodynamic protocol for explaining subcriticality and other subtle features in self-deflagrating solids

A novel universal approach to understand the self-deflagration in solids has been attempted by using basic thermodynamic equation of partial differentiation, where burning mte depends on the initial temperature and pressure of the system. Self-deflagrating solids are rare and are reported only in few compounds like ammonium perchlorate (AP), polystyrene peroxide and tetrazole. This approach has led us to understand the unique characteristics of AP, viz. the existence of low pressure deflagration limit (LPL 20 atm), hitherto not understood sufficiently. This analysis infers that the overall surface activation energy comprises of two components governed by the condensed phase and gas phase processes. The most attractive feature of the model is the identification of a new subcritical regime I' below LPL where AP does not burn. The model is aptly supported by the thermochemical computations and temperature-profile analyses of the combustion train. The thermodynamic model is further corroborated from the kinetic analysis of the high pressure (1-30 atm) DTA thermograms which affords distinct empirical decomposition rate laws in regimes I' and 1 (20-60 atm). Using Fourier-Kirchoff one dimensional heat transfer differential equation, the phase transition thickness and the melt-layer thickness have been computed which conform to the experimental data.

Phenylboronic acids in crystal engineering: Utility of the energetically unfavorable syn,syn-conformation in co-crystal design

Phenylboronic acids can exist, in principle, in three different conformers (syn,syn; syn,anti and anti,anti) with distinct energy profiles. In their native state, these compounds prefer the energetically favored syn, anti-conformation. In molecular complexes, however, the functionality exhibits conformational diversity. In this paper we report a series of co-crystals, with N-donor compounds, prepared by a design strategy involving the synthons based on the syn, syn-conformation of the boronic acid functionality. For this purpose, we employed compounds with the 1,2-diazo fragment (alprazolam, 1H-tetrazole, acetazolamide and benzotriazole), 1,10-phenanthroline and 2,2'-bipyridine for the co-crystallization experiments. However, our study shows that the mere presence of the 1,2-diazo fragment in the coformer does not guarantee the successful formation of co-crystals with a syn, syn-conformation of the boronic acid. [GRAPHICS] The -B(OH)(2) fragment makes unsymmetrical O-H center dot center dot center dot N heterosynthons with alprazolam (ALP) and 1,10-phenanthroline (PHEN). In the co-crystals of phenylboronic acids with 1H-tetrazole (TETR) and 2,2'-bipyridine (BPY), the symmetrical boronic acid dimer is the major synthon. In the BPY complex, boronic acid forms linear chains and the pyridine compound interacts with the lateral OH of boronic acid dimers that acts as a connector, thus forming a ladder structure. In the TETR complex, each heterocycle interacts with three boronic acids. While two boronic acids interact using the phenolic group, the third molecule generates O-H center dot center dot center dot N hydrogen bonds using the extra OH group, of -B(OH)(2) fragment, left after the dimer formation. Thus, although molecules were selected retrosynthetically with the 1,2-diazo fragment or with nearby hetero-atoms to induce co-crystal formation using the syn,syn-orientation of the -B(OH)(2) functionality, co-crystal formation is in fact selective and is probably driven by energy factors. Acetazolamide (ACET) contains self-complementary functional groups and hence creates stable homosynthons. Phenylboronic acids being weak competitors fail to perturb the homosynthons and hence the components crystallize separately. Therefore, besides the availability of possible hydrogen bond acceptors in the required position and orientation, the ability of the phenyl-boronic acid to perturb the existing interactions is also a prerequisite to form co-crystals. This is illustrated in the table below. In the case of ALP, PHEN and BPY, the native structures are stabilized by weak interactions and may be influenced by the boronic acid fragment. Thus phenylboronic acids can attain co-crystals with those compounds, wherein the cyclic O-H center dot center dot center dot N hydrogen bonds are stronger than the individual homo-interactions. This can lower the lattice energy of the molecular complex as compared with the individual crystals. [GRAPHICS] Phenylboronic acids show some selectivity in the formation of co-crystals with N-heterocycles. The differences in solubility of the components fall short to provide a possible reason for the selective formation of co-crystals only with certain compounds. These compounds, being weak acids, do not follow the Delta pK(a) analysis and hence fail to provide any conclusive observation. Theoretical results show that of the three conformers possible, the syn,anti conformer is the most stable. The relative stabilities of the three conformers syn,anti,syn,syn and anti,anti are 0.0, 2.18 and 3.14 kcal/mol, respectively. The theoretical calculations corroborate the fact that only energetically favorable synthons can induce the formation of heterosynthons, as in ALP and PHEN complexes. From a theoretical and structural analysis it is seen that phenylboronic acids will form interactions with those molecules wherein the heterocyclic and acidic fragments can interrupt the homosynthons. However, the energy profile is shallow and can be perturbed easily by the presence of competing functional groups (such as OH and COOH) in the vicinity. [GRAPHICS] .

Modificação química da poliacrilonitrila com grupos tetrazol assistida por micro-ondas

Nos últimos anos, a irradiação por micro-ondas tem sido cada vez mais usada na síntese de varias moléculas orgânicas, devido a uma série de vantagens que essa nova tecnologia apresenta. Até o momento, existem poucos estudos sobre polimerizações assistidas por micro-ondas e menos ainda sobre a modificação de polímeros usando essa nova fonte de energia. Polímeros heterocíclicos contendo anéis azóicos, como o tetrazol possuem interesse acadêmico e comercial devido as suas várias aplicações. Nesta Dissertação foi estuda a modificação química da poliacrilonitrila pela incorporação em sua cadeia polimérica de 10% de grupos tetrazol empregando-se a irradiação de micro-ondas e o método convencional (térmico). Foram utilizados um forno de micro-ondas doméstico e um reator de micro-ondas monomodo nas reações assistidas por micro-ondas. As reações em reator foram realizadas em vaso aberto, em solução (DMF) ou em massa, sendo variado o tempo e a temperatura reacional, bem como a potência do equipamento. Os copolímeros produzidos foram caracterizados por espectroscopia na região do infravermelho (FTIR) e os teores de grupos tetrazol incorporados na PAN foram determinados por titulometria de neutralização. A poliacrilonitrila foi modificada quimicamente com sucesso tanto no forno doméstico quanto no reator de micro-ondas, como foi verificado pela sua análise de FTIR. Pela determinação do grau de incorporação de grupos tetrazol nos polímeros concluiu-se que, para a reação em solução, nas temperaturas mais elevas, bem como em uma potência maior, o teor de heterocíclico incorporado no polímero está muito próximo do valor obtido pelo método convencional. Já as reações conduzidas em massa apresentaram graus de incorporação inferiores as das feitas em solução.

Obtenção do copolímero de acrilonitrila e vinil-tetrazol e sua aplicação como inibidor de corrosão para meio ácido

Polímeros heterocíclicos abrangem uma grande variedade de materiais, desde simples polímeros lineares sintetizados a partir de monômeros do tipo heterocíclicos vinílicos até polímeros altamente funcionalizados e reticulados. Neste trabalho realizou-se a modificação química da poliacrilonitrila com a incorporação de grupos tetrazol em diferentes teores (1%, 2,5%, 5% e 10%). Os copolímeros de acrilonitrila e vinil-tetrazol obtidos foram caracterizados por FTIR e o seu comportamento térmico analisado por DSC e TGA. Os polímeros heterocíclicos foram avaliados como inibidores de corrosão para aço-carbono em meio ácido obtendo-se bons resultados e alcançando, em alguns casos, uma eficiência de inibição média superior a 70%

新型非肽类血管紧张素II受体拮抗剂设计合成及其生物活性研究

Ang II受体拮抗剂是作用于肾素-血管紧张素系统(RAS)的抗高血压药，因其抗高血压作用与较老的抗高血压药物作用相同，且更具有选择性，不良反应状况与安慰剂相似,而在高血压治疗中逐渐引起研究者重视，并成为目前增长最快的抗高血压药物。在许多AngII受体拮抗剂中四氮唑结构已成为固定基团，但四氮唑有许多合成及代谢弊端。因此，寻找其他合适的杂环酸性基团来替代四氮唑，在保持较高口服活性的同时克服相应缺陷，具有极其重要的意义。 本项目以四氮唑沙坦类药物为先导化合物，运用生物电子等排原理及拼合原理，根据计算机分子模拟研究结果，对其进行结构修饰和改造，首次将咪唑、氯代咪唑、三氮唑及咪唑啉替代四氮唑，并结合具有较高AngII受体拮抗活性的联苯并咪唑衍生物，设计并合成一系列含咪唑，咪唑啉，氯代咪唑及三氮唑衍生物的Ang II受体拮抗剂。 研究这一系列新型AngII受体拮抗剂的体内、体外抗高血压活性时，发现咪唑啉衍生物展示了与对照药物几乎相当的活性，而咪唑、氯代咪唑和三氮唑衍生物分别表现了较弱或者没有活性，这些研究对今后更进一步设计合成新的Ang II受体拮抗剂具有重要的指导意义，同时也为筛选抗高血压药物奠定良好的基础。 The angiotensin II receptor antagonists act on renin-angiotensin system (RAS), which are as effective as other types of anti-hypertensive drugs. Because even the more specific and comparable to placebo in terms of side effects, Ang II receptor antagonists cause a high attention and become the fastest growing anti-hypertension drugs. Most of such compounds share the biphenyltetrazole unit with the lead Losartan. However, there are many defects in tetrazole synthesis and vivo metabolism. Therefore, we felt quite encouraged to find some proper acidic heterocyclic groups which maintain the same oral bioavailability to replace the tetrazole. In the present paper, we applied the bioisostere and combination principle, in accordance with the results of computer modeling of molecular, to modify the lead structural of terazole in sartan compounds reported. We turned our attention to replace the tetrazole ring with imidazole rings, chloro-imidazole, imidazoline, traizole ring and combinated them with benzimidazoles derivatives which have antagonistic activity for angiotensin II to design and synthesize a series of Ang II receptor antagonists contaning imidazole ring, chloro-imidazole, imidazoline or traizole ring. In addition, activity tests in vivo and in vivo had shown that imidazoline derivatives display almost equivalent activity with the reference drug, but imidazole derivatives, chloro-imidazole, triazole derivatives were weak or non-performance of the hypotensive activity. We believe that the imidazoline derivative type Ang II receptor antagonists can build a foundation for the development of a novel series of anti-hypertensive drugs.

2,4-dinitrophenol as an activating reagent in a facile preparation of cyclic phosphate trimesters

Abstract 2,4-Dinitrophenol was employed with benzyloxy-bis-(diisopropylamino)phosphine to synthesise the cyclic phosphate derivatives of a series of alkane diols (HO–(CH2)n–OH, n=2–6) in good isolated yields. Tetrazole and DNP were compared by 31P NMR spectroscopy for their ability to catalyse the cyclisation at the P(III) stage. Investigation of the phosphate triester stability under various oxidation and chromatographic conditions resulted in the optimisation of the isolation procedures of the chemically unstable cyclic compounds. Conditions for debenzylation were developed to yield the corresponding cyclic phosphodiesters quantitatively. The methodology was further applied to the preparation and isolation of the cyclic phosphate derivative of a carbohydrate.

SYNTHESIS AND PROPERTIES OF DITHYMIDINE PHOSPHATE ANALOGS CONTAINING 3'-THIOTHYMIDINE

Dithymidine-3'-S-phosphorothioate (d(TspT)) has been prepared from a 5'-O-monomethoxytritylthymidine-3'-S- phosphorothioamidite (7) by activation with 5-(p- nitrophenyl)tetrazole in the presence of 3'-O- acetylthymidine. The resulting dinucleoside phosphorothioite is readily oxidised to the corresponding 3'-S-phosphorothioate using either tetrabutylammonium (TBA) perlodate or TBA oxone and has been deprotected under standard conditions to yield d(TspT). This dithymidine phosphate analogue is comparatively resistant to hydrolysis by nuclease P1, but the P-S bond is readily cleaved by aqueous solutions of either iodine or silver nitrate. Dithymidine-3'-S-phosphorodithioate (d[Tsp(s)T] was prepared in an analogous fashion using sulphur to oxidise the intermediate dinucleoside phosphoro thiolte. Absolute stereochemistry has been assigned to the diastereoisomers of d by comparing their physical and chemical properties to those of the dinucleoside phosphorothioates.