Pulsed plasma thruster ignition system: investigation, test design and results

Fra i sistemi di propulsione elettrica per satelliti, il Pulsed Plasma Thruster, PPT, è quello dal design più semplice. È anche il primo sistema di propulsione elettrica utilizzato in un satellite artificiale, ossia ZOND-2 lanciato nel 1964 dall’Unione Sovietica. Tuttavia, dopo circa 50 anni di ricerca, la comprensione teorica e sperimentale di questo dispositivo rimane limitata. Questo elaborato di tesi magistrale indaga sul sottosistema di accensione del PPT, cercando di mettere in luce alcuni aspetti legati al lifetime della spark plug, SP. Tale SP, o candela, è l’attuatore del sottosistema di accensione. Questa produce una scintilla sulla sua superficie, la quale permette la realizzazione della scarica elettrica principale fra i due elettrodi del motore. Questa scarica crea una sottile parete di plasma che, per mezzo della forza elettromagnetica di Lorentz, produce la spinta del PPT. Poiché la SP si trova all’interno del catodo del motore e si affaccia nella camera di scarica, questa soffre di fenomeni di corrosione e di deposizione carbonacea proveniente dal propellente. Questi fenomeni possono limitare notevolmente il lifetime della SP. I parametri connessi alla vita operativa della SP sono numerosi. In questo elaborato si è analizzata la possibilità di utilizzare una elettronica di accensione della candela alternativa alla classica soluzione che utilizza un trasformatore. Il sottosistema di accensione classico e quello nuovo sono stati realizzati e testati, per metterne in luce le differenze ed i possibili vantaggi/svantaggi.

En beskrivning av manuellt test : Svagheter och styrkor med och utan stöd avett testverktyg

Test is an area in system development. Test can be performed manually or automated. Test activities can be supported by Word documents and Excel sheets for documenting and executing test cases and as well for follow up, but there are also new test tools designed to support and facilitate the testing process and the activities of the test. This study has described manual test and identified strengths and weaknesses of manual testing with a testing tool called Microsoft Test Manager (MTM) and of manual testing using test cases and test log templates developed by the testers at Sogeti. The result that emerged from the problem and strength analysis and the analysis of literature studies and firsthand experiences (in terms of creating, documenting and executing test cases) addresses the issue of the following weaknesses and strengths. Strengths of the test tool is that it contains needed functionality all in one place and it is available when needed without having to open up other programs which saves many steps of activity. Strengths with test without the support of test tools is mainly that it is easy to learn and gives a good overview, easy to format text as desired and flexible to changes during execution of a test case. Weaknesses in test with the support of test tools include that it is difficult to get a good overview of the entire test case, that it is not possible to format the text in the test steps. It is as well not possible to modify the test steps during execution. It is also difficult to use some of the test design techniques of TMap, for example a checklist, when using the test tool MTM. Weaknesses with test without the support of the testing tool MTM is that the tester gets many more steps of activities to do compared to doing the same activities with the support of the testing tool MTM. There is more to remember because the documents the tester use are not directly linked. Altogether the strengths of the test tool stands out when it comes to supporting the testing process.

Reuse-based test planning for core-based systems-on-chip

Electronic applications are currently developed under the reuse-based paradigm. This design methodology presents several advantages for the reduction of the design complexity, but brings new challenges for the test of the final circuit. The access to embedded cores, the integration of several test methods, and the optimization of the several cost factors are just a few of the several problems that need to be tackled during test planning. Within this context, this thesis proposes two test planning approaches that aim at reducing the test costs of a core-based system by means of hardware reuse and integration of the test planning into the design flow. The first approach considers systems whose cores are connected directly or through a functional bus. The test planning method consists of a comprehensive model that includes the definition of a multi-mode access mechanism inside the chip and a search algorithm for the exploration of the design space. The access mechanism model considers the reuse of functional connections as well as partial test buses, cores transparency, and other bypass modes. The test schedule is defined in conjunction with the access mechanism so that good trade-offs among the costs of pins, area, and test time can be sought. Furthermore, system power constraints are also considered. This expansion of concerns makes it possible an efficient, yet fine-grained search, in the huge design space of a reuse-based environment. Experimental results clearly show the variety of trade-offs that can be explored using the proposed model, and its effectiveness on optimizing the system test plan. Networks-on-chip are likely to become the main communication platform of systemson- chip. Thus, the second approach presented in this work proposes the reuse of the on-chip network for the test of the cores embedded into the systems that use this communication platform. A power-aware test scheduling algorithm aiming at exploiting the network characteristics to minimize the system test time is presented. The reuse strategy is evaluated considering a number of system configurations, such as different positions of the cores in the network, power consumption constraints and number of interfaces with the tester. Experimental results show that the parallelization capability of the network can be exploited to reduce the system test time, whereas area and pin overhead are strongly minimized. In this manuscript, the main problems of the test of core-based systems are firstly identified and the current solutions are discussed. The problems being tackled by this thesis are then listed and the test planning approaches are detailed. Both test planning techniques are validated for the recently released ITC’02 SoC Test Benchmarks, and further compared to other test planning methods of the literature. This comparison confirms the efficiency of the proposed methods.

Oxidative stability of soybean oil added to Lentinus edodes and Agaricus blazei mushrooms extracts in an accelerated storage test

Purpose: The purpose of this paper is to evaluate the oxidative stability of soybean oil added by Lentinus edodes and Agaricus blezei extracts in accelerated storage test. Design/methodology/approach: The following treatments were subjected to accelerated storage test in an oven at 60°C for 15 days: Control (soybean oil without antioxidants), TBHQ (soybean oil + 100 mg/kg of TBHQ), BHT (soybean oil + 100 mg/kg of BHT), L. edodes (soybean oil + 3,500 mg/kg of L. edodes extract) and A. blazei (soybean oil + 3,500 mg/kg of A. blazei extract). The samples were taken every three days and analyzed for peroxide values and conjugated dienes. Findings: At the end of 15 days, the treatments TBHQ, A. blazei, L. edodes, Control and BHT showed 6.47, 8.81, 41.53, 71.28 and 78.40 meq/kg, respectively, for peroxide values and 0.37, 0.40, 0.67, 1.07 and 1.00 per cent, respectively, for conjugated dienes. Originality/value: The research indicates that mushrooms may be a promising source of natural antioxidants. Therefore, natural extracts of mushrooms can be applied to vegetable oils as a way to reduce the degradation caused by lipid oxidation. © Emerald Group Publishing Limited.

Role of generalized and episode specific memories in the word frequency effect in recognition

Frequency, recency, and type of prior exposure to very low-and high-frequency words were manipulated in a 3-phase (i.e., familiarization training, study, and test) design. Increasing the frequency with which a definition for a very low-frequency word was provided during familiarization facilitated the word's recognition in both yes-no (Experiment 1) and forced-choice paradigms (Experiment 2). Recognition of very low-frequency words not accompanied by a definition during familiarization first increased, then decreased as familiarization frequency increased (Experiment I). Reasons for these differences were investigated in Experiment 3 using judgments of recency and frequency. Results suggested that prior familiarization of a very low-frequency word with its definition may allow a more adequate episodic representation of the word to be formed during a subsequent study trial. Theoretical implications of these results for current models of memory are discussed.

Improving pain management by nurses: A pilot peer intervention program

Significant pain continues to be reported by many hospitalized patients despite the numerous and varied educational programs developed and implemented to improve pain management. A theoretically based Peer Intervention Program was designed from a predictive model to address nurses' beliefs, attitudes, subjective norms, self-efficacy, perceived control and intentions in the management of pain with p.r.n. (as required) narcotic analgesia. The pilot study of this program utilized a quasi-experimental pre-post test design with a patient intervention, nurse and patient intervention and control conditions consisting of 24, 18 and 19 nurses, respectively. One week after the intervention, significant differences were found between the nurse and patient condition and the two other conditions in beliefs, self-efficacy, perceived control, positive trend in attitudes, subjective norms and intentions. The most positive aspects of the program were supportive interactive discussions with peers and an awareness and understanding of beliefs and attitudes and their roles in behavior.

Laser-MAG-hybridihitsauksen käyttöönotto laivan rungon valmistuksessa

Perinteisten kaarihitsausmenetelmien suhteellisen suuri lämmöntuonti aiheuttaa huomattavia muodonmuutoksia laivan rungon valmistusprosessin alkuvaiheessa. Muodonmuutosten seurauksena rakenteiden mitta- ja muototarkkuus heikkenee, mikä lisää oikaisu- ja sovitustyötä myöhemmissä työvaiheissa. Hitsausmuodonmuutoksia voidaan vähentää siirtymällä käyttämään laser-MAG-hybridihitsausta, jossa lämmöntuonti on merkittävästi pienempi kuin kaarihitsauksessa. Näin kyetään oleellisesti leikkaamaan oikaisu- ja sovitustyöstä syntyviä kustannuksia. Tämän diplomityön tavoitteena oli kehittää tuotantovalmiiksi kuitulaser- ja MAG-hitsauksen yhdistelmäprosessi Aker Yards Oy:n Turun telakalla loppuvuoden 2006 aikana. Hitsauslaitteiston asennus oli valmistunut kesäkuussa 2006, minkä jälkeen aloitettiin luokituslaitoksen hyväksymän koeohjelman hitsaukset. Käyttöönotto suunnitelmaan sisältyvä koehitsausohjelma oli laadittu Det Norske Veritaksen julkaisemaa ohjetta (Guidelines no. 19) mukaillen. Ensimmäiseksi määritettiin hitsauskokeiden avulla prosessille laadun ja tehokkuuden suhteen optimaalinen railogeometria. Seuraavaksi optimoitiin prosessin hitsausparametrit 6 mm:n aineenpaksuudelle hyödyntäen Taguchi-koesuunnittelumenetelmää. Tämän jälkeen optimiparametreilla hitsattiin koekappale väsytyskokeisiin, jotka suoritettiin Teknillisen korkeakoulun laivalaboratoriossa. Väsytyskoetulokset täyttivät luokituslaitoksen vaatimukset. Myös hitsauksen menetelmäkoe suoritettiin hyväksytetysti. Viimeinen koeohjelman mukainen hitsauskoesarja tehtiin prosessiparametrien sallittujen vaihtelurajojen määrittämiseksi. Diplomityön tavoite täyttyi joulukuussa 2006, jolloin 'laivan kansipaneeli hitsattiin ensimmäistä kertaa uudella hitsausprosessilla. Hitsauksen laatu korreloi hyvin menetelmäkokeen tulosten kanssa ¿ hitsit olivat tasalaatuisia ja ne täyttivät B-luokan vaatimukset.

Cognitively Empowering Internet-Based Patient Education for Ambulatory Orthopaedic Surgery Patients

Tiedollista voimavaraistumista tukeva internet-perustainen ohjaus päiväkirurgisille ortopedisille potilaille Tutkimuksen tarkoituksena oli kehittää tiedollista voimavaraistumista tukeva Internetperustainen potilasohjausohjelma sekä arvioida sitä. Tutkimusprosessi jaettiin kahteen vaiheeseen. Ensimmäisessä vaiheessa luotiin sisältö tiedollista voimavaraistumista tukevalle Internet-perustaiselle ohjaukselle päiväkirurgisia ortopedisia potilaita varten. Toisessa vaiheessa arvioitiin Internet-perustaisen ohjauksen (koeryhmä) hyväksyttävyyttä käyttäjien arvioimana ja ohjauksen tuloksia sekä verrattiin Internet-perustaisen ohjauksen (koeryhmä) tuloksia tiedollisesti voimavaraistumista tukevan sairaanhoitajan välittämään ohjauksen (kontrolliryhmä) tuloksiin. Tutkimuksen tavoitteena oli luoda uusi potilasohjausmuoto joka tarjoaa yksilöllisen, osallistavan ja aikaan ja paikkaan sitomattoman ohjauksen päiväkirurgiseen ortopediseen leikkaukseen tulevalle potilaalle. Tutkimuksen ensimmäisessä vaiheessa käytettiin kuvailevaa ja vertailevaa tutkimusmenetelmää (ennen ja jälkeen testaus). Tutkimukseen osallistui 120 päiväkirurgista ortopedista potilasta joiden tiedon odotuksia ja heille välitettyä tietoa tarkasteltiin. Tutkimuksen ensimmäisen vaiheen tuloksien ja aikaisemman voimavaraistumista käsittävän tiedon perusteella luotiin sisältö tiedollista voimavaraistumista tukevalle Internet-perustaiselle ohjaukselle. Sisältö rakentui voimavaraistavan tiedon kuudesta eri osa-alueesta. Tutkimuksen toisessa vaiheessa käytettiin randomoitua kokeellista tutkimusasetelmaa. Päiväkirurgiseen ortopediseen leikkaukseen tulevat potilaat randomoitiin koeryhmään (n=72) Internetperustaiseen ohjaukseen ja kontrolliryhmään (n=75) sairaanhoitajan välittämään ohjaukseen. Aineisto kerättiin strukturoitujen mittareiden avulla ja tulokset analysoitiin tilastollisesti. Tutkimuksen tulokset osoittavat, että kehitettyä tiedollisesti voimavaraistumista tukevaa Internet-perustaista potilasohjausmenetelmää voidaan suositella käytettäväksi ortopedisten päiväkirurgisten potilaiden ohjauksessa ja potilailla on hyvät mahdollisuudet voimavaraistua tiedollisesti sen avulla. Monipuolista tietoa sisältävä Internet-perustainen ohjaus osoittautui käyttäjien näkökulmasta hyväksyttäväksi. Vaikka Internet ohjauksen hyväksyttävyys koettiin osittain heikommaksi kuin sairaanhoitajan välittämän ohjauksen, potilaat käyttivät nettisivustoa ongelmitta ja arvioivat sen helppokäyttöiseksi. Ohjausmuodolla ei ollut vaikutusta hoidosta aiheutuneisiin kustannuksiin. Sen sijaan kustannuksista organisaatiolle voitiin puolittaa sairaanhoitajan ohjaukseen käyttämä aika Internet-perustaisen ohjauksen avulla. Internet-perustaiseen ohjaukseen osallistuneiden potilaiden tiedon taso ja kokemus tiedon riittävyydestä lisääntyivät ohjauksen jälkeen enemmän kuin sairaanhoitajan välittämään potilasohjaukseen osallistuneiden potilaiden tiedot. Ohjausmuodolla ei ollut vaikutusta potilaiden kokemien tunteiden ja oireiden voimakkuuteen. Yhteenvetona voidaan todeta, että tiedollisesti voimavaraistava Internet-perustaista ohjausta voidaan suositella vaihtoehtoiseksi menetelmäksi sairaanhoitajan välittämälle ohjaukselle päiväkirurgiseen ortopediseen leikkaukseen tuleville potilaille.

Ohjelmistotestauksen käytänteet Suomessa

Ohjelmistotestauksen merkitys on kasvanut sen mukaan mitä enemmän ohjelmisto-tuotteet vaikuttavat jokapäiväisesseen elämämme. Tämän vuoksi yritysten investointien ja laadunvarmentamisen yhteys on ilmeinen. Organisaatiot panostavat yhä enemmän ei–funktionaaliseen testaukseen, kuten turvallisuuden, suorituskyvyn ja käytettävyyden testaamiseen. Tämän työn tarkoituksena on tutkia ohjelmistotestauksen nykytilannetta Suomessa. Syy tähän on uudistaa ja parantaa ohjelmistotestauksen kurssitarjontaa Turun yliopistossa vastaamaan parhaalla mahdollisella tavalla yritysten tarvetta. Opinnäyte on toteutettu replikaatio-tutkimuksena. Pääosa kyselystä sisältää kysymyksiä ohjelmistotestauksen menetelmistä ja työkaluista testausprosessin toimintojen aikana. Lisäksi on yleisiä kysymyksiä yrityksistä ja niiden ohjelmistotestausympäristöistä. Kyselyssä otetaan myös kantaa yritysten käyttämiin monenlaisiin testaus-tasoihin, -tyyppeihin ja testauksessa kohdattuihin haasteisiin. Tämä opinnäyte perustuu testausprosessistandardeihin. Ohjelmistotestausstandardit ovat keskeisessä asemassa tässä työssä, vaikka ne ovat olleet viime aikoina vahvan kritiikin kohteena. Epäilys standardien välttämättömyyteen on syntynyt muutoksista ohjelmistokehityksessä. Tämä työ esittelee tulokset ohjelmistotestauksen käytännöistä. Tuloksia on verrattu aiheeseen liittyvän aiemman kyselyn (Lee, Kang, & Lee, 2011) tuloksiin. Ajanpuutteen havaitaan olevan suuri haaste ohjelmistotestauksessa. Ketterä ohjelmistokehitys on saavuttanut suosiota kaikissa vastaajien yrityksissä. Testauksen menetelmät ja työkalut testauksen arviointiin, suunnitteluun ja raportointiin ovat hyvin vähäisessä käytössä. Toisaalta testauksen menetelmien ja työkalujen käyttö automaattiseen testauksen toteuttamiseen ja virheiden hallintaan on lisääntynyt. Järjestelmä-, hyväksyntä-, yksikkö- ja integraatiotestaus ovat käytössä kaikkien vastaajien edustamissa yrityksissä. Kaikkien vastaajien mielestä regressio- sekä tutkiva- ja ei-funktionaalinen testaus ovat tärkeitä tekniikoita.

Nursing Students’ Learning about an Empowering Discourse In Patient Education

The main purpose of this study was to describe and evaluate nursing students' learning about an empowering discourse in patient education. In Phase 1, the purpose was to describe an empowering discourse between a nurse and a patient. In Phase 2, the purpose was first to create a computer simulation program of an empowering discourse based on the description, and second, the purpose was to evaluate nursing students’ learning of how to conduct an empowering discourse using a computer simulation program. The ultimate goal was to strengthen the knowledge basis on empowering discourse and to develop nursing students’ knowledge about how to conduct an empowering discourse for the development of patient education. In Phase I, empowering discourse was described using a systematic literature review with a metasummary technique (n=15). Data were collected covering a period from January 1995 to October 2005. In Phase 2, the computer simulation program of empowering discourse was created based the description in 2006–2007. A descriptive comparative design was used to evaluate students’ (n=69) process of learning empowering discourse using the computer simulation program and a pretest–post-test design without a control group was used to evaluate students’ (n=43) outcomes of learning. Data were collected in 2007. Empowering discourse was a structured process and it was possible to simulate and learned with the computer simulation program. According to students’ knowledge, empowering discourse was an unstructured process. Process of learning empowering discourse using the computer simulation program was controlled by the students and it changed students’ knowledge. The outcomes of learning empowering discourse appeared as changes of students’ knowledge to more holistic and better-organized or only to more holistic or better-organized. The study strengthened knowledge base of empowering discourse and developed students to more knowledgeable in empowering discourse.

University students’ regulation of learning and text processing – examples from medical and teacher education

The general aim of the thesis was to study university students’ learning from the perspective of regulation of learning and text processing. The data were collected from the two academic disciplines of medical and teacher education, which share the features of highly scheduled study, a multidisciplinary character, a complex relationship between theory and practice and a professional nature. Contemporary information society poses new challenges for learning, as it is not possible to learn all the information needed in a profession during a study programme. Therefore, it is increasingly important to learn how to think and learn independently, how to recognise gaps in and update one’s knowledge and how to deal with the huge amount of constantly changing information. In other words, it is critical to regulate one’s learning and to process text effectively. The thesis comprises five sub-studies that employed cross-sectional, longitudinal and experimental designs and multiple methods, from surveys to eye tracking. Study I examined the connections between students’ study orientations and the ways they regulate their learning. In total, 410 second-, fourth- and sixth-year medical students from two Finnish medical schools participated in the study by completing a questionnaire measuring both general study orientations and regulation strategies. The students were generally deeply oriented towards their studies. However, they regulated their studying externally. Several interesting and theoretically reasonable connections between the variables were found. For instance, self-regulation was positively correlated with deep orientation and achievement orientation and was negatively correlated with non-commitment. However, external regulation was likewise positively correlated with deep orientation and achievement orientation but also with surface orientation and systematic orientation. It is argued that external regulation might function as an effective coping strategy in the cognitively loaded medical curriculum. Study II focused on medical students’ regulation of learning and their conceptions of the learning environment in an innovative medical course where traditional lectures were combined wth problem-based learning (PBL) group work. First-year medical and dental students (N = 153) completed a questionnaire assessing their regulation strategies of learning and views about the PBL group work. The results indicated that external regulation and self-regulation of the learning content were the most typical regulation strategies among the participants. In line with previous studies, self-regulation wasconnected with study success. Strictly organised PBL sessions were not considered as useful as lectures, although the students’ views of the teacher/tutor and the group were mainly positive. Therefore, developers of teaching methods are challenged to think of new solutions that facilitate reflection of one’s learning and that improve the development of self-regulation. In Study III, a person-centred approach to studying regulation strategies was employed, in contrast to the traditional variable-centred approach used in Study I and Study II. The aim of Study III was to identify different regulation strategy profiles among medical students (N = 162) across time and to examine to what extent these profiles predict study success in preclinical studies. Four regulation strategy profiles were identified, and connections with study success were found. Students with the lowest self-regulation and with an increasing lack of regulation performed worse than the other groups. As the person-centred approach enables us to individualise students with diverse regulation patterns, it could be used in supporting student learning and in facilitating the early diagnosis of learning difficulties. In Study IV, 91 student teachers participated in a pre-test/post-test design where they answered open-ended questions about a complex science concept both before and after reading either a traditional, expository science text or a refutational text that prompted the reader to change his/her beliefs according to scientific beliefs about the phenomenon. The student teachers completed a questionnaire concerning their regulation and processing strategies. The results showed that the students’ understanding improved after text reading intervention and that refutational text promoted understanding better than the traditional text. Additionally, regulation and processing strategies were found to be connected with understanding the science phenomenon. A weak trend showed that weaker learners would benefit more from the refutational text. It seems that learners with effective learning strategies are able to pick out the relevant content regardless of the text type, whereas weaker learners might benefit from refutational parts that contrast the most typical misconceptions with scientific views. The purpose of Study V was to use eye tracking to determine how third-year medical studets (n = 39) and internal medicine residents (n = 13) read and solve patient case texts. The results revealed differences between medical students and residents in processing patient case texts; compared to the students, the residents were more accurate in their diagnoses and processed the texts significantly faster and with a lower number of fixations. Different reading patterns were also found. The observed differences between medical students and residents in processing patient case texts could be used in medical education to model expert reasoning and to teach how a good medical text should be constructed. The main findings of the thesis indicate that even among very selected student populations, such as high-achieving medical students or student teachers, there seems to be a lot of variation in regulation strategies of learning and text processing. As these learning strategies are related to successful studying, students enter educational programmes with rather different chances of managing and achieving success. Further, the ways of engaging in learning seldom centre on a single strategy or approach; rather, students seem to combine several strategies to a certain degree. Sometimes, it can be a matter of perspective of which way of learning can be considered best; therefore, the reality of studying in higher education is often more complicated than the simplistic view of self-regulation as a good quality and external regulation as a harmful quality. The beginning of university studies may be stressful for many, as the gap between high school and university studies is huge and those strategies that were adequate during high school might not work as well in higher education. Therefore, it is important to map students’ learning strategies and to encourage them to engage in using high-quality learning strategies from the beginning. Instead of separate courses on learning skills, the integration of these skills into course contents should be considered. Furthermore, learning complex scientific phenomena could be facilitated by paying attention to high-quality learning materials and texts and other support from the learning environment also in the university. Eye tracking seems to have great potential in evaluating performance and growing diagnostic expertise in text processing, although more research using texts as stimulus is needed. Both medical and teacher education programmes and the professions themselves are challenging in terms of their multidisciplinary nature and increasing amounts of information and therefore require good lifelong learning skills during the study period and later in work life.

Nursing students and older people nursing. Towards a future career

The purpose of this two-phased study is to examine the interest of nursing students in choosing a career in older people nursing. First, the scoping phase explores the different premises for choosing older people nursing as a career. Second, the evaluation phase investigates the outcomes of the developed educational intervention involving older people as promoters of choosing a career in older people nursing, factors related to these outcomes, and experiences with educational intervention. The ultimate goal is to encourage more nursing students to choose older people nursing as their career. The scoping phase applies an exploratory design and centres around a descriptive, cross-sectional survey, documentary research and a scoping literature review. The information sources for this phase include 183 nursing students, 101 newspaper articles and 66 research articles. The evaluation phase applies a quasi-experimental design and a pre-post-test design with a non-equivalent comparison group and a post-intervention survey. The information sources for this phase include 87 nursing students and 43 older people. In both phases, statistical and narrative methods are applied in the data analysis. Nursing students neutrally regarded the idea of a career in older people nursing. The most consistent factors related to the nursing students’ career plans in older people nursing were found to be nursing work experience and various educational preparations in the field. Nursing students in the intervention group (n=40) were more interested in older people nursing and had more positive attitudes towards older people than did students in the comparison group (n=36). However, in both groups, the interest that students had at the baseline was associated with the interest at the one-month follow-up. There were no significant differences between the groups in terms of the students’ knowledge levels about ageing. The nursing students and older people alike highly appreciated participating in the educational intervention. It seems possible to positively impact nursing students and their choices to pursue careers in older people nursing, at least in the short-term. The involvement of older people as promoters of this career choice provides one encouraging alternative for impacting students’ career choices, but additional research is needed.

Virtuaalisen oppimisympäristön funktionaalisen käyttöliittymätestauksen automatisointi

Tämän tutkimuksen kohteena on Turun yliopistossa kehitetyn www-pohjaisen ViLLE-oppimisjärjestelmän funktionaalisen käyttöliittymätestauksen automatisointityö. Tutkimusta varten olen kerännyt kattavasti aineistoa aihetta käsittelevästä yleisestä kirjallisuudesta ja artikkeleista sekä toteutuksen kannalta spesifistä tietoa tarjoavista Internet-lähteistä. Tutkimuksessa olen tehnyt myös pienehkön määrän testausalan asiantuntijahaastatteluja. Tutkimuksen empiirisessä osuudessa olen valinnut testaukseen käytettävän testaustyökalun sekä toteuttanut valitulla testaustyökalulla ViLLE-oppimisjärjestelmän testauksen automatisointityön soveltamalla käytäntöön tutkimuksen teoriaosuudessa esitettyä tietoa hyvistä käytänteistä funktionaalisen käyttöliittymätestauksen automatisoinnissa. Tutkimuksen toteutuksessa olen käyttänyt kvalitatiivista tutkimusmenetelmää. Tutkimuksen empiirisen osuuden pohjalta kerätyn havaintoaineiston perusteella olen selvittänyt vastaukset seuraaviin tutkimuksessa esitettyihin tutkimuskysymyksiin: • Miten käytetty testaustyökalu on valittu ja mitkä olivat valintaan vaikuttaneet tärkeimmät kriteerit? • Miten käytetty testaustyökalu soveltuu ViLLE-oppimisjärjestelmän funktionaalisen käyttöliittymätestauksen automatisointiin? • Millä eri tavoin käytäntöön viety hyvien testiautomaation laatimistapojen mukainen toteutus vaikuttaa nyt laadittuun testiautomaatioon? • Esiintyikö toteutetussa testiautomaatiossa tutkimuksen teoreettisessa viitekehyksessä kuvattuja funktionaalisen käyttöliittymätestauksen automatisoinnille tyypillisiä ongelmia ja miten ongelmat saatiin ratkaistua? Tutkimuksen tulokset osoittavat melko selvästi, että ViLLE-oppimisympäristön funktionaalisen käyttöliittymätestauksen automatisointityön toteutukseen valittu Vaadin TestBench -testaustyökalu, joka on valittu tutkimuksen alkuvaiheessa suoritetun evaluoinnin perusteella, soveltuu käyttötarkoitukseensa hyvin. Lisäksi pystyin luotettavasti havainnoimaan, että testiautomaation ylläpidon tarve sekä testien laatimiseen kuluva aika vähenevät merkittävästi, kun testit laaditaan heti alusta lähtien rakenteeltaan modulaariseksi sekä tietyin teknisin keinoin mahdollisimman vähän käyttöliittymän rakennetta huomioonottavaksi. Ongelmia testiautomaation laatimisessa voivat aiheuttaa käytetty työkalu itsessään, testattavan järjestelmän toteutus sekä testien suoritusympäristö. Huolimatta kirjallisuuskatsauksen perusteella tehdystä varautumisesta tyypillisiin testiautomaation laatimisessa esiintyviin ongelmiin, myös joitakin sellaisia ongelmia esiintyi, joihin en ollut osannut varautua. Mahdollisiin ongelmiin etukäteen varautuminen kuitenkin selvästi auttoi suurimpaan osaan testiautomaation laatimisessa esiintyneistä ongelmista.

The Beneficial Effects of Motivational Self-Talk on Endurance Performance and Cognitive Function in the Heat

The role of psychological strategies on endurance performance and cognitive function in the heat is unclear. This thesis tested the effects of a two-week motivational self-talk (MST) intervention - specific to heat stress - on endurance capacity and cognitive function in the heat (35°C 50% RH). The study utilized a pre-test / post-test design testing endurance capacity using a time to exhaustion test (TTE) after exercise-induced hyperthermia. Cognitive function (e.g executive function) was tested at baseline in thermoneutral (22°C 30% RH), before (R1) and after the TTE (R2). MST led to a significant improvement (~30%) in TTE and significantly faster completion time with fewer errors made on executive function tasks at baseline and R2, but not in R1, while there were no differences in the control group. Overall, these results indicate that using a top-down regulation strategy consisting of self-contextualized MST can improve physical and cognitive performance in the heat.

The positive impact of red palm oil in school meals on vitamin A status: study in Burkina Faso

Affiliation: Augustin Zeba & Hélène Delisle : Département de nutrition, Faculté de médecine, Université de Montréal