Tenacity and silk investment of two orb weavers: considerations about diversification of the Araneoidea

Orbiculariae consists of two major clades: the cribellate Deinopidea and the much more diverse ecribellate Araneoidea. It has been hypothesized that the higher diversity of Araneoidea is a consequence of the superiority of the viscid orb web. However, this explanation seems incomplete: for example, cribellate silk may perform better than viscid silk in some contexts. Here, we consider the hypothesis that the diversification of Araneoidea was facilitated by changes in microhabitat occupation behavior due to the cheaper viscid orb web. In the present work we investigate the idea that the reduction in site tenacity caused by the emergence of the viscid orb web has led to an increase in the exploration of different resources and to a greater diversification of the Arancoidea through the evolutionary time. To test this idea, we evaluated the response of one cribellate orb web spider (Zosis geniculata Olivier 1789, Uloboridae) and one ecribellate orb web spider (Metazygia rogenhoferi Keyserling 1878, Arancidae) to abrupt prey absence. The changes in site tenacity and the day-to-day investment in web silk were evaluated. Spiders with three-dimensional webs tend to exhibit greater site tenacity than spiders making orb webs. Zosis geniculata and M. rogenhoferi show similar site tenacity when prey is ample. When prey is unavailable, the tenacity of the cribellate species increases while the tenacity of the ecribellate remains unchanged, and the silk investment of both species decreases. However, this decrease in silk investment is more extensive in Z. geniculata. These results coincide with the idea that a less costly ecribellate orb web leads to a lower tenacity and suggest that more frequent microhabitat abandonment in a context of insect radiation (Neiptera) leads to more diverse and opportunistic exploration of microhabitats that, in the long term, may be one explanation for the greater Araneoidea diversification.

Desenvolvimento de estruturas fibrosas com comportamento auxético

Tese de Doutoramento Engenharia Têxtil

Study of the potential employment of Malvaceae Species in composites materials

The employ of vegetal fibers for textiles and composites represents a great potential in economic and social sustainable development. Some Malvaceae species are considered tropical cosmopolitans, such as from Sida genus. Several species of this genus provide excellent textile bast fibers, which are very similar in qualities to the jute textile fiber. The objective of the present study is present the physicochemical characterization of six Brazilian vegetal fibers: Sida rhombifolia L.; Sida carpinifolia L. f.; Sidastrum paniculatum (L.) Fryxell; Sida cordifolia L.; Malvastrum coromandelianum (L.) Gurck; Wissadula subpeltata (Kuntze) R.E.Fries. Respectively the two first species are from Brazilian Atlantic Forest biome and the four remaining from Brazilian Cerrado biome, despite of present in other regions of the planet. The stems of these species were retted in water at 37oC for 20 days. The fibers were tested in order to determine tensile rupture strength, tenacity, elongation, Young’s modulus, cross microscopic structure, Scanning Electronic Microscopy (SEM), regain, combustion, acid, alkali, organic solvent and cellulase effects, pH of the aqueous extract, Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA). The obtained values were compared with those from fibers of recognized applicability in the textile industry including hemp. The results are promising in terms of their employment in thermoset and thermoplastic medium resistance composites.

Characterization of physical, mechanical and chemical properties of quiscal fibres : the influence of atmospheric DBD plasma treatment

This paper reports the first attempt of characterizing various physical, mechanical and chemical properties of Quiscal fibres, used by the native communities in Chile and investigating the influence of atmospheric dielectric barrier discharge plasma treatment on various properties such as diameter and linear density, fat, wax and impurity%, moisture regain, chemical elements and groups, thermal degradation, surface morphology, etc. According to the experimental observations, Quiscal fibre has lower tenacity than most of the technical grade natural fibres such as sisal, hemp, flax, etc., and plasma treatment at optimum dose improved its tenacity to the level of sisal fibres. Plasma treatment also reduced the amount of fat, wax and other foreign impurities present in Quiscal fibres as well as removed lignin and hemicellulose partially from the fibre structure. Plasma treatment led to functionalization of Quiscal fibre surface with chemical groups, as revealed from attenuated total reflection spectroscopy and also confirmed from the elemental analysis using energy dispersive Xray technique and pH and conductivity measurements of fibre aqueous extract. The wetting behavior of Quiscal fibre also improved considerably through plasma treatment. However, untreated and plasma treated Quiscal fibres showed similar thermal degradation behavior, except the final degradation stage, in which plasma treated fibres showed higher stability and incomplete degradation unlike the untreated fibres. The experimental results suggested that the plasma treated Quiscal fibres, like other technical grade natural fibres, can find potential application as reinforcement of composite materials for various industrial applications.

Designing cnc knit for hybrid membrane and bending active structures

Recent advances in computation allow for the integration of design and simulation of highly interrelated systems, such as hybrids of structural membranes and bending active elements. The engaged complexities of forces and logistics can be mediated through the development of materials with project specific properties and detailing. CNC knitting with high tenacity yarn enables this practice and offers an alternative to current woven membranes. The design and fabrication of an 8m high fabric tower through an interdisciplinary team of architects, structural and textile engineers, allowed to investigate means to design, specify, make and test CNC knit as material for hybrid structures in architectural scale. This paper shares the developed process, identifies challenges, potentials and future work.

Assessing the application of polypropylene multifilament yarns in brain phantoms

The currently available clinical imaging methods do not provide highly detailed information about location and severity of axonal injury or the expected recovery time of patients with traumatic brain injury [1]. High-Definition Fiber Tractography (HDFT) is a novel imaging modality that allows visualizing and quantifying, directly, the degree of axons damage, predicting functional deficits due to traumatic axonal injury and loss of cortical projections. This imaging modality is based on diffusion technology [2]. The inexistence of a phantom able to mimic properly the human brain hinders the possibility of testing, calibrating and validating these medical imaging techniques. Most research done in this area fails in key points, such as the size limit reproduced of the brain fibers and the quick and easy reproducibility of phantoms [3]. For that reason, it is necessary to develop similar structures matching the micron scale of axon tubes. Flexible textiles can play an important role since they allow producing controlled packing densities and crossing structures that match closely the human crossing patterns of the brain. To build a brain phantom, several parameters must be taken into account in what concerns to the materials selection, like hydrophobicity, density and fiber diameter, since these factors influence directly the values of fractional anisotropy. Fiber cross-section shape is other important parameter. Earlier studies showed that synthetic fibrous materials are a good choice for building a brain phantom [4]. The present work is integrated in a broader project that aims to develop a brain phantom made by fibrous materials to validate and calibrate HDFT. Due to the similarity between thousands of hollow multifilaments in a fibrous arrangement, like a yarn, and the axons, low twist polypropylene multifilament yarns were selected for this development. In this sense, extruded hollow filaments were analysed in scanning electron microscope to characterize their main dimensions and shape. In order to approximate the dimensional scale to human axons, five types of polypropylene yarns with different linear density (denier) were used, aiming to understand the effect of linear density on the filament inner and outer areas. Moreover, in order to achieve the required dimensions, the polypropylene filaments cross-section was diminished in a drawing stage of a filament extrusion line. Subsequently, tensile tests were performed to characterize the mechanical behaviour of hollow filaments and to evaluate the differences between stretched and non-stretched filaments. In general, an increase of the linear density causes the increase in the size of the filament cross section. With the increase of structure orientation of filaments, induced by stretching, breaking tenacity increases and elongation at break decreases. The production of hollow fibers, with the required characteristics, is one of the key steps to create a brain phantom that properly mimics the human brain that may be used for the validation and calibration of HDFT, an imaging approach that is expected to contribute significantly to the areas of brain related research.

Fully engaged: tackling health inequalities through public health interventions

The evolving role of Primary Care Trusts (PCTs) is currently centre stage, with fundamental debate emerging from Commissioning a patient-led NHS and Our health, our care, our say a new direction for community services. This paper argues that PCTs have a crucial role to play in the public health agenda, specifically tackling health inequalities. This responsibility will become even stronger as the present wave of reforms gains momentum. There is also a lively debate on whether these reforms will make inroads into the persistent problem of health inequality or will exacerbate them even further unless robust, additional intervention levers and mechanisms are introduced. This paper suggests that PCTs will be central to ensuring the balance of reforms is tilted towards a more rather than a less equitable NHS. One of the key responsibilities for PCTs outlined by the Department of Health1 will be to act as the anchor at local level to the increasingly diverse and potentially3fragmented NHS. By using their crucial commissioning role to provide overall coherence to the health system, acting as leading local champions of the NHS and continuing the drive for improvement in access and quality, PCTs will have to act as enforcer and guardian of the equity of the NHS at local level. There is widespread evidence of the tenacity of health inequalities in Great Britain. This report looks at the measures that a fully engaged۝3 PCT has taken to grapple with the issues and draws some conclusions as to their possible wider application.refer to the resource

Beneficial Effects of Selected Additives on Asphalt Cement Mixes, HR-278, 1987

Effects of polyolefins, neoprene, styrene-butadiene-styrene (SBS) block copolymers, styrene-butadiene rubber (SBR) latex, and hydrated lime on two asphalt cements were evaluated. Physical and chemical tests were performed on a total of 16 binder blends. Asphalt concrete mixes were prepared and tested with these modified binders and two aggregates (crushed limestone and gravel), each at three asphalt content levels. Properties evaluated on the modified binders (original and thin-film oven aged) included: viscosity at 25 deg C, 60 deg C and 135 deg C with capillary tube and cone-plate viscometer, penetration at 5 deg C and 25 deg C, softening point, force ductility, and elastic recovery at 10 deg C, dropping ball test, tensile strength, and toughness and tenacity tests at 25 deg C. From these the penetration index, the viscosity-temperature susceptibility, the penetration-viscosity number, the critical low-temperature, long loading-time stiffness, and the cracking temperature were calculated. In addition, the binders were studied with x-ray diffraction, reflected fluorescence microscopy, and high-performance liquid chromatography techniques. Engineering properties evaluated on the 72 asphalt concrete mixes containing additives included: Marshall stability and flow, Marshall stiffness, voids properties, resilient modulus, indirect tensile strength, permanent deformation (creep), and effects of moisture by vacuum-saturation and Lottman treatments. Pavement sections of varied asphalt concrete thicknesses and containing different additives were compared to control mixes in terms of structural responses and pavement lives for different subgrades. Although all of the additives tested improved at least one aspect of the binder/mixture properties, no additive was found to improve all the relevant binder/mixture properties at the same time. On the basis of overall considerations, the optimum beneficial effects can be expected when the additives are used in conjunction with softer grade asphalts.

Biomechanics and structural adaptations of the rat femur after hindlimb suspension and treadmill running

We microscopically and mechanically evaluated the femurs of rats subjected to hindlimb unloading (tail suspension) followed by treadmill training. Female Wistar rats were randomly divided into five groups containing 12-14 rats: control I (118 days old), control II (139 days old), suspended (tail suspension for 28 days), suspended-released (released for 21 days after 28 days of suspension), and suspended-trained (trained for 21 days after 28 days of suspension). We measured bone resistance by bending-compression mechanical tests of the entire proximal half of the femur and three-point bending tests of diaphyseal cortical bone. We determined bone microstructure by tetracycline labeling of trabecular and cortical bone. We found that tail suspension weakened bone (ultimate load = 86.3 ± 13.5 N, tenacity modulus = 0.027 ± 0.011 MPa·m vs ultimate load = 101.5 ± 10.5 N, tenacity modulus = 0.019 ± 0.006 MPa·m in control I animals). The tenacity modulus for suspended and released animals was 0.023 ± 0.010 MPa·m vs 0.046 ± 0.018 MPa·m for trained animals and 0.035 ± 0.010 MPa·m for control animals. These data indicate that normal activity and training resulted in recovered bone resistance, but suspended-released rats presented femoral head flattening and earlier closure of the growth plate. Microscopically, we found that suspension inhibited new bone subperiosteal and endosteal formation. The bone disuse atrophy secondary to hypoactivity in rats can be reversed by an early regime of exercising, which is more advantageous than ordinary cage activities alone.

The way to organizational longevity - Balancing stability and change in Shinise firms

THE WAY TO ORGANIZATIONAL LONGEVITY – Balancing stability and change in Shinise firms The overall purpose of this dissertation is to investigate the secret of longevity in Shinise firms. On the basic assumption that organizational longevity is about balancing stability and change, the theoretical perspectives incorporate routine practice, organizational culture, and organizational identity. These theories explain stability and change in an organization separately and in combination. Qualitative inductive theory building was used in the study. Overall, the empirical data comprised 75 in-depth and semi-structured interviews, 137 archival materials, and observations made over 17 weeks. According to the empirical findings, longevity in Shinise firms is attributable to the internal mechanisms (Shinise tenacity, stability in motion, and emergent change) to secure a balance between stability and change, the continuing stability of the socio-cultural environment in the local community, and active interaction between organizational and local cultures. The contribution of the study to the literature on organizational longevity and the alternative theoretical approaches is first, in theorizing the mechanisms of Shinise tenacity and cross-level cultural dynamism, and second, in pointing out the critical role of: the way firms set their ultimate goal, the dynamism in culture, and the effect of history of the firm to the current business in securing longevity. KEY WORDS Change; Culture; Organizational identity; Organizational longevity; Routines; Shinise firms; Stability; Qualitative research

Non-parametric stability analyses of dough properties in wheat

AbstractLiterature has unveiled that a paper has not been published yet on using non-parametric stability statistics (NPSSs) for evaluating genotypic stability in dough properties of wheat. Accordingly, the effects of genotype (G), environment (E) and GE interaction (GEI) on alveograph parameters, i.e. dough baking strength (W) and its tenacity (P)/extensibility (L), of 18 wheat (T. aestivum L.) genotypes were studied under irrigated field conditions in an 8-year trial (2006-2014) in central Turkey. Furthermore, genotypic stability for W and P/L was determined using 8 NPSSs viz. RM-Rank mean, RSD-Rank’s standard deviation, RS-Rank Sum, TOP-Ranking, Si(1), Si(2), Si(3) and Si(6) rank statistics. The ANOVA revealed that W and P/L were primarily controlled by E, although G and GEI also had significant effects. Among the 8 NPSSs, only RM, RS and TOP statistics were suitable for detecting the genotypes with high stable and bread making quality (e.g. G1 and G17). In conclusion, using RM, RS and TOP statistics is advisable to select for dough quality in wheat under multi-environment trials (METs).

Brock University Coat of Arms

The armorial bearings for Brock University, or more simply the University Coat of Arms, or crest, was designed in a large part by Presdent Gibson, assisted by other members of the Board of Governors (A preliminary design can be seen here). The Coat of Arms was granted to Brock University on March 17th, 1965. The Coat of Arms consist of an eagle, taken from General Brock’s own arms, displayed against a scarlet background - one of the official colours of Brock University. Immediately above it on a chief argent is displayed a maple-leaf (for Canada), a scallop shell (from the Lincoln and Welland regiment), and a trillium (for the province of Ontario). An open book fronts the eagle representing learning and knowledge. The crest itself is made up of a torch symbolizing learning, surrounded by a serpent for wisdom, with two calumet or North American pipes of peace, to symbolize Canada, friendship and agreement. The supporters consist of a beaver on the dexter side, emblematic of Canada and representing work and industry in learning. On the sinister side, a brock or badger (also in commemoration of General Brock) represents tenacity of purpose. The motto 'Surgite' is visible just below the arms.

Explaining voice behaviour: The roles of personal resources, social interdependence, and supervisor leadership style

This study contributes to current research on voice behaviour by investigating several under-explored drivers that motivate employees’ expression of constructive ideas about work-related issues. It draws from the concept of psychological climate to examine how voice behaviour is influenced by employees’ (1) personal resources (tenacity and passion for work), (2) perceptions of social interdependence (task and outcome interdependence), and (3) supervisor leadership style (transformational and transactional). Using a multi-source research design, surveys were administered to 226 employees and to 24 supervisors at a Canadian-based not-for-profit organization. The hypotheses are tested with hierarchical regression analysis. The results indicate that employees are more likely to engage in voice behaviour to the extent that they exhibit higher levels of passion for work. Further, their voice behaviour is lower to the extent that their supervisor adopts a transformational leadership style characterized by high performance expectations or a transactional leadership style based on contingent rewards and contingent punishment behaviours. The study reveals that there are no significant effects of tenacity, social interdependence, and behaviour-focused transformational leadership on voice. The findings have significant implications for organizations that seek to encourage employee behaviours that help improve current work practices or undo harmful situations.

Vida y muerte empresarial. Estudios empíricos de perdurabilidad - de la morbilidad a la perdurabilidad, estudios empresas galardonadas Premio Ave Fenix

Con esta investigación se pretende hacer una aproximación a la identificación de los pasos que utilizaron las empresas para salir de la crisis empresarial que presentaban, analizando los posibles errores que hayan afectado significativamente a la empresa, en los ámbitos económicos, sociales y morales, esto con el fin de corregirlos y aprender de ellos logrando perdurar en el mercado laboral empresarial. A estas empresas que han pasado por estos procesos de mejoras continuas son nominadas al premio Ave Fénix como empresas de resurgimiento empresarial, este galardón reconoce el esfuerzo de las empresas que logran resurgir como el Ave Fénix, al superar las dificultades que las condujeron al acuerdo de restructuración empresarial que contempla la Ley 550/1999. Con este galardón, la Universidad del Rosario en cooperación con la Superintendencia de Sociedades reconocen a las empresas que, en medio de una crisis, abocadas a un proceso de liquidación voluntaria u obligatoria, han demostrado tenacidad al resurgir - de la mano de Supersociedades - o las que se reestructuran y se establecen así como ejemplos de perdurabilidad y constancia.