Reform and Redesign: A Review of the Changing Role of the Public Purposes in R&D and Technology Institutes (Working Paper 17)

As the globalization of knowledge has taken hold over the past decade, and as governments around the world review their new roles in support of the production of knowledge, several factors have shaped the context in governments’ approach to public research. Arguably, none has been more affected by these pressures for reform than government scientific and technology laboratories or institutes. Often ignored in the re-shaping of national systems of innovation, these organizations play an important role in advancing national economic and social objectives. This paper, by reviewing examples of reforms underway in several countries, including Canada, France, Germany, the UK, Japan, USA and Latin America, will argue that government research and technology institutes — often historically surrogates for industrial research — are gradually re-defining their mandates to meet the new pressures of globalization as well as satisfying growing public demands for increased relevance and efficiency in responding to citizens’ and industry needs.

Technology transfer at the National Institutes of Health.

Item 1070-M

Application by Waterford Institute of Technology for Designation as a University (Port Report)

This report provides our advice to the Minister for Education and Science on the application for designation as a university made by Waterford Institute of Technology (WIT). WIT submitted an application for designation in February 2006. There is a statutory procedure for the creation of a new university under Section 9 of the Universities Act 1997. We were asked to advise the Minister on the merits of the submission in order for her to provide guidance to Government on whether such a formal statutory review should be initiated. It is not a straightforward task to advise on this case for several reasons. These include the facts that: the regulatory environment for Institutes of Technology has changed significantly since WIT made their application; and the designation of any IoT would potentially challenge the government’s current higher education policy. So our report has to range more widely than the merits of the WIT application, taken at face value.

Implementing NX Remote Desktop technology in the LTSP system

This project focuses on studying and testing the benefits of the NX Remote Desktop technology in administrative use for Finnish Meteorological Institutes existing Linux Terminal Service Project environment. This was done due to the criticality of the system caused by growing number of users as the Linux Terminal Service Project system expands. Although many of the supporting tasks can be done via Secure Shell connection, testing graphical programs or desktop behaviour in such a way is impossible. At first basic technologies behind the NX Remote Desktop were studied, and after that started the testing of two possible programs, FreeNX and NoMachine NX server. Testing the functionality and bandwidth demands were first done in a closed local area network, and results were studied. The better candidate was then installed in a virtual server simulating actual Linux Terminal Service Project server at Finnish Meteorological Institute and connection from Internet was tested to see was there any problems with firewalls and security policies. The results are reported in this study. Studying and testing the two different candidates of NX Remote Desktop showed, that NoMachine NX Server provides better customer support and documentation. Security aspects of the Finnish Meteorological Institute had also to be considered, and since updates along with the new developing tools are announced in next version of the program, this version was the choice. Studies also show that even NoMachine promises a swift connection over an average of 20Kbit/s bandwidth, at least double of that is needed. This project gives an overview of available remote desktop products along their benefits. NX Remote Desktop technology is studied, and installation instructions are included. Testing is done in both, closed and the actual environment and problems and suggestions are studied and analyzed. The installation to the actual LTSP server is not yet made, but a virtual server is put up in the same place in the view of network topology. This ensures, that if the administrators are satisfied with the system, installation and setting up the system will go as described in this report.

Consumer Satisfaction with Websites of Banks - The Moderating Effect of Consumer Technology Attractiveness

The websites are becoming the firms’ first contact interface with their clients. Hence, understanding customers’ online attitudes and behaviors have been capturing increased research attention. The extant research has pointed customers’ satisfaction with the websites as the main reason for customers’ online behaviors. This research has used mostly variables related to the characteristics of the websites as the predictors of customers’ website satisfaction. However, recent research shows that groups of individuals displaying distinctive characteristics react differently to the same context. Therefore, behavior may be considerably different among groups of customers. In this study, we develop a conceptual model of the influence of individual characteristics on the traditional website quality – website satisfaction relationship. We propose a model based on the construct of consumer technology attractiveness (CTA) to represent the genuine positive propensity of individuals toward technology. We further test the moderating effect of this construct on the commonly used predictors of customer’s website satisfaction using Hierarchical Multiple Regression. The empirical study was based on websites of banks operating in Portuguese market. The commercial banking industry is one of the Portuguese industries that better uses the Internet to establish relationships with clients. Data were collected through an online website satisfaction survey, participated by the lecturers and postgraduate students from four Portuguese Universities and Polytechnic Institutes. Our final sample comprised 276 valid questionnaires. Our study permits to conclude that the most commonly used antecedents of website overall satisfaction are still relevant for analyzing consumer’s satisfaction with the banks websites. We also conclude that CTA has a significant moderating effect on almost all customers’ website satisfaction variables used in the study. This study contributes to highlight the theoretical importance and significant influence of consumers’ personal characteristics on their online behavior. Moreover, for the practitioners, a better understanding of these individual characteristics will assist them in developing customized websites that will meet customers’ expectations. O estudo dos comportamentos dos consumidores em ambientes online tem vindo a ter um crescente interesse, uma vez que os websites estão a transformar-se num importante ponto de contacto entre as empresas e os seus clientes. A satisfação dos clientes com os websites tem sido apontada pela Literatura como o principal condicionante dos comportamentos online dos consumidores. No entanto, a investigação científica tem conseguido provar que grupos de indivíduos com características distintas reagem de forma diferente quando submetidos a contextos idênticos, o que poderá levar a diferenças significativas no comportamento online de consumidores pertencentes a diferentes grupos. Neste estudo desenvolvemos um modelo conceptual que reflecte a influência de características individuais na relação entre a qualidade e a satisfação com os websites. Propomos um modelo assente na atractividade tecnológica do consumidor (CTA), que representa a propensão genuína que os indivíduos possuem em relação à tecnologia. Testamos o efeito moderador deste conceito sobre as variáveis mais utilizadas nos estudos sobre a satisfação dos consumidores com os websites, utilizando a Regressão Múltipla Hierárquica. O estudo empírico baseou-se nos websites dos bancos que operam no mercado português, uma vez que este sector é um dos que melhor utiliza a Internet na sua relação com os clientes. Os dados foram recolhidos através de um questionário sobre satisfação com os websites, colocado online e dirigido a docentes e estudantes de programas de pós-graduações, mestrados e doutoramentos de quatro universidades e instituto politécnico portugueses, tendo resultado numa amostra final de 276 questionários validados estatisticamente. Este estudo permitiu concluir que as variáveis que são mais utilizadas como antecedentes da satisfação dos consumidores com os websites, continuam a ser igualmente válidas para a análise dos websites dos bancos. Também concluímos que a CTA tem efeitos moderadores significativos na grande maioria das variáveis utilizadas neste estudo. Assim, conseguimos realçar a importância teórica das características pessoais dos consumidores no seu comportamento online. Para os gestores, uma melhor compreensão destas características individuais permitir-lhes-á desenvolver websites customizados que irão satisfazer as expectativas dos seus clientes.

The role of a firm's absorptive capacity and the technology transfer process in clusters: How effective are technology centres in low-tech clusters?

This paper analyses how the internal resources of small- and medium-sized enterprises determine access (learning processes) to technology centres (TCs) or industrial research institutes (innovation infrastructure) in traditional low-tech clusters. These interactions basically represent traded (market-based) transactions, which constitute important sources of knowledge in clusters. The paper addresses the role of TCs in low-tech clusters, and uses semi-structured interviews with 80 firms in a manufacturing cluster. The results point out that producer–user interactions are the most frequent; thus, the higher the sector knowledge-intensive base, the more likely the utilization of the available research infrastructure becomes. Conversely, the sectors with less knowledge-intensive structures, i.e. less absorptive capacity (AC), present weak linkages to TCs, as they frequently prefer to interact with suppliers, who act as transceivers of knowledge. Therefore, not all the firms in a cluster can fully exploit the available research infrastructure, and their AC moderates this engagement. In addition, the existence of TCs is not sufficient since the active role of a firm's search strategies to undertake interactions and conduct openness to available sources of knowledge is also needed. The study has implications for policymakers and academia.

Cardiovascular instrumentation : proceedings of the Working Conference on Applicability of New Technology to Biobehavioral Research, May 16-19, 1982, Houston, Texas /

"March 1984."

NIH/ADAMHA/CDC technology transfer /

Mode of access: Internet.

Educational technology and the teaching-learning process; a selected bibliography.

Mode of access: Internet.

Health benefits of pets : summary of working group : NIH Technology Assessment Workshop, September 10-11, 1987.

Shipping list no.: 88-461-P.

Technology policy and technological innovation in the People's Republic of China

The objective of this research is to unveil the dynamics of technological innovation in planned economies in transition. It is proposed in the thesis that all innovation systems in the world, in fact, consist of certain configurations of market and hierarchy. These systems have always been shifting from one existing market-hierarchy mix to a new one, which is expected to be more conducive to technological innovation and economic development. Current reforms in many planned economies in transition reflect this theoretical proposition. A research framework is constructed to include three main dimensions for the study of a specific innovation system, i.e. Arrangements, Achievements and Actors. China, which has undergone reforms since 1978, is chosen as the empirical basis of the research. The research examined technology policy and technological innovation in China between 1978 to 1988. The thesis starts from Arrangements - R&D System in China and Its Reform. The thesis illustrates reforms in the R&D system in relation to government technology policy. There exist coherent government efforts to promote innovations through various plans, and the planning process incorporates both market and command elements. The institutional structure of Chinese R&D system remains still vertically departmentalised, but horizontal links are created through the market. Secondly, Achievements - Performance of Chinese R&D System is assessed through patterns of technological innovation. Data from National Awards for S&T Progress (1978-1988) are included in a substantial database, which is used to generate patterns of technological innovation and patterns of innovating organisations. These patterns were presented and interpreted in relation to geographical differences, sectoral differences, typological differences, forms of co-operation and the impacts of S&T policy and reform. The third dimension is study on Actors - Innovation in Applied R&D institutes. Through semi-structured interviews and questionnaire survey, internal structure and research management are analysed in the light of ongoing reforms. The reform of R&D funding system greatly affected the way applied R&D institutes operate. Both organisational and individual incentives for innovating are increasingly associated with economic or material benefits. The research suggests there is a need to put reforms in the R&D system into a wider societal and political context. Some general attributes of applied R&D institutes are also discussed in the thesis.

An analysis of the on-time graduation rate in the two-year program at National Taipei Institute of Technology in Taiwan

Taiwan's technical vocational educational system includes three levels: (1) institutes of technology (two and four year programs), (2) junior colleges (two, three and five year programs), and (3) senior vocational schools. Two-year junior colleges enroll their students through two channels: (1) based on results of the Particular Screening Entrance Examination (PSEE), (2) based on the Joint College Entrance Examination (JCEE). The PSEE has two categories: Category I includes on-time graduates with excellent performance, which means that they are within the top ten of their classes; Category II students include award-winning students in talent contests who have achieved a minimum grade point average of 75%. The JCEE is a regular entrance examination given to any senior vocation school graduate.^ Basic courses have a great impact on the students' academic performance. The purpose of the study was to focus on the effectiveness of teaching mathematics in two-year junior colleges and to analyze and correlate the results of two-year junior college students' performance in calculus and on-time graduation. The target group consisted of 521 students enrolled at National Taipei Institute of Technology in 1993.^ Calculus is a very important course for engineering majors in two-year junior colleges and has a great impact on the students' academic performance. This retrospective study showed that there was a correlation between students' performance in calculus and on-time graduation after two years of study.^ The conclusions of the study urge the Ministry of Education to reform two-year junior college curriculum standards to emphasize basic rudimentary courses. It is recommended that engineering majors receive three hours of calculus per week as the current requirement of only two hours per week is inadequate. The future job market will require a technologically advanced labor force that can be trained in a higher education system. More channels of higher education for two-year junior college graduates should be made available for those wishing to pursue bachelor degrees. Additional work in calculus will not only enhance the opportunities for two-year junior college graduates to continue their pursuit of an advanced academic degree, but also serve them well as they seek career advancement. ^

The effects of jigsaw cooperative learning on motivation to learn English at Chung -Hwa Institute of Technology, Taiwan

The Ministry of Education (MOE) of the Republic of China in Taiwan considers English to be one of the keys to raising Taiwan's international competitiveness and requires students attending institutes of technology to receive instruction in English as a foreign language (EFL). This study focused on impacts of the use of cooperative learning as a teaching method on EFL learners. The setting was the English classes of Chung-Hwa Institute of Technology (CHIT). The subjects were 77 students from two classes, majoring in Business Administration. ^ The purpose of this study was to determine the differential effects (i.e., achievement in learning English, motivation orientation and intensity, and attitude concerning English language and culture) on students between the traditional Chinese teaching method and the Jigsaw cooperative learning method at CHIT. ^ The research design for the study was quasi-experimental and descriptive. This study utilized three survey instruments and final exam grades to investigate the effect of Jigsaw on the EFL students' competency in English, and on their attitudes about, and level of motivation toward learning English. The independent variable was the instructional method: one class utilized the Jigsaw approach to cooperative learning while the other utilized the traditional Chinese approach. The dependent variables were academic performance, motivation orientation toward English, motivation intensity toward learning English, and attitude toward learning of English and English culture as determined by final exam and questionnaire scores. The questionnaires and exam were administrated at the beginning and end of the semester. ^ Data analysis indicated that students learning cooperatively had higher final course grades and made more integrative statements on the measure of orientation toward learning English than students who learned using the traditional Chinese methods. Participants who learned using cooperative strategies had more positive attitudes about learning English connected with their desire to associate with English speakers and had more positive attitudes about the learning mechanism they experienced than those instructed though traditional Chinese learning strategies. There were no differences between the groups on the measure of motivation intensity. Recommendations were made to improve the use of the Jigsaw method of cooperative learning through both pedagogical and policy modifications. ^

A phenomenological study of Irish and Portuguese women’s experiences of receiving family support when studying STEM subjects at technical institutes

Comunicação apresentada na 44th SEFI Conference, 12-­15 September 2016, Tampere, Finland