EVALUATION OF TECHNOLOGICAL INTENSITY OF EXPORTS IN THE FORESTRY SECTOR

ABSTRACT One of the fastest growing sectors in the domestic industry is the forestry, which has contributed significantly to economic development, job creation, income taxes, putting Brazil in a prominent position in the world market. This paper analyzes the evolution of the technological intensity of 12 main products exported by the sector, from 2000 to 2011. For that, utilizes an indicator called PRODY, which allows classifying different products according to their technological intensity or income content and considers the GDP per capita of exporting countries of each product, weighted by its revealed comparative advantage. It can be seen by the results, a continuous growth in all products' technology indicators and their decomposition into income effects, comparative advantage and joint effects, allowed to verify the main causes of this growth. Products with lower PRODY values are those that presented a higher evolution during the period studied. Products of higher processing, and those from pulp and paper industry, had greater technological advances, thanks to a joint effect, while the ones of lower processing, had a technological improvement due to the increase in GDP per capita in exporting countries. Sawn wood was the standout product, being the only one who proved to be dependent of comparative advantage effect, confirming that this industry has been reinventing itself and incorporating, in fact, more technology. This study revealed the importance of technological intensification to generate comparative advantage and be able to stand against international competition.

Neighborhood and Efficiency in Manufacturing in Brazilian Regions: A Spatial Markov Chain Analysis

This paper analyzes the geography of regional competitiveness in manufacturing in Brazil. The authors estimate stochastic frontiers to calculate regional efficiency of representative firms in 137 regions in the period 2000-2006, in four sectors defined by technological intensity. The efficiency results are analyzed using Markov Spatial Transition Matrices to provide insights into the transition of regions between efficiency levels, considering their local spatial context. The results indicate that geography plays an important role in manufacturing competitiveness. In particular, regions with more competitive neighbors are more likely to improve their relative efficiency (pull effect) over time, and regions with less competitive neighbors are more likely to lose relative efficiency (drag effect). The authors find that the pull effect is stronger than the drag effect.

Comércio bilateral Portugal - Brasil

Dissertação apresentada ao Instituto Superior de Contabilidade e Administração do Porto para obtenção do Grau de Mestre em Empreendedorismo e Internacionalização Orientadora: Professora Doutora Celsa Maria de Carvalho Machado

Research and development expenditure in the business sector as indicator of knowledge economy: the Portuguese experience

The objective of the paper is to help to understand recent changes in the structure of R&D activities, by analyzing data on the expenditure of the business sector in research and development (R&D). The results are framed in an international context, through comparison with indicators from the most developed countries, divided by technological intensity and economic activity. The study reveals that the indicators of Portuguese R&D expenditure in the business sector are closely linked both to fiscal policy and to high foreign direct investment in knowledge-intensive industries. It also links these indicators to phenomena such as the abundance of skilled labor in pharmaceutical industries and the government intervention in some sectors of the economy (namely health and rail transportation).

Colaboração em inovação: parceiros ou concorrentes?

Dissertação de mestrado em Economia Industrial e da Empresa

Exportações e inovação: uma análise para América Latina e Sul-Sudeste da Ásia

The purpose of this study is to compare the performance of Latin America and South-Southeast Asia countries over the past three decades with respect to technological intensity of their exports. The main contribution of this paper is to construct an indicator of technological intensity to allow adequate measurement of the degree of knowledge content of exports from both regions. This indicator was calculated for all sample countries for the period 1983-2008, based on data from Comtrade/WITS and clearly show how Asian countries have a technological intensity of their exports much higher than the Latin American countries.

Crise du secteur manufacturier au Québec : ampleur et nature des restructurations impliquant des licenciements collectifs entre 2003 et 2008

Des données de Statistique Canada montrent que le Québec a perdu 86 700 emplois manufacturiers nets entre 2004 et 2008, ce qui représente un recul de 13,8% (Bernard, 2009). Un dollar canadien fort, la concurrence internationale, les délocalisations de la production et les consolidations globales d'opérations sont souvent mentionnés comme étant les causes des difficultés du secteur manufacturier canadien - principalement concentré au Québec et en Ontario. La crise financière amorcée à l’été 2007, a contribué à aggraver la crise propre au secteur manufacturier dont les origines remontent au début des années 2000 (Weir, 2007; AgirE, 2008; Pilat et al., 2006). Cette recherche examine le processus de restructuration du secteur manufacturier québécois de manière détaillée au niveau des établissements afin d’en évaluer l’ampleur et la nature entre 2003 et 2008. Les données colligées permettent de poser un regard unique et original sur les restructurations ayant impliqué des licenciements collectifs au Québec. Ces données sont issues de deux sources. D'abord, nous avons utilisé une liste d‘entreprises qui ont envoyé un avis de licenciement collectif au Ministère de l’Emploi et de la Solidarité sociale du Québec entre 2003 et 2008. En second lieu, nous avons eu recours aux archives en ligne des médias pour trouver d’autres évènements de restructuration non rapportés par le ministère ainsi que pour obtenir des informations complémentaires sur les évènements déjà compilés dans la liste du ministère. Notre méthodologie de recherche et notre typologie analytique des types de restructuration sont basées sur celles développées par l’European Monitoring Center on Change (EMCC) et reprises dans certaines études comme celles de Bronfenbrenner et Luce (2004) et Hickey et Schenk (soumis). Les résultats, présentés en termes d’événements de restructuration et d’emplois perdus, sont ventilés en fonction de quelques variables (année d’occurrence, taille de l’établissement, sous-secteur d’activité, intensité technologique, région administrative, types de restructuration). Les raisons données par l’entreprise afin de justifier la restructuration ont aussi été colligées. Au cours de la période étudiée, nous avons identifié au total 1 631 évènements de restructurations dans le secteur manufacturier à travers toutes les régions du Québec, qui ont entraîné la perte de 129 383 emplois. Ainsi, 78 246 emplois ont été perdus suite à la réduction des activités de l‘établissement et 51 137 emplois l’ont été suite à la fermeture de leur établissement. La forme la plus fréquente de restructuration est la restructuration interne, suivi par la faillite/fermeture. Les types de restructuration qui ont engendré le plus de pertes d’emplois en moyenne par évènement sont dans l’ordre, la délocalisation, la sous-traitance, la consolidation d’activités ainsi que la fusion-acquisition. L’année 2008 fut celle où il y a eu le plus grand nombre de restructurations. Montréal et la Montérégie sont les régions qui ont le plus été touchées par la restructuration, les pertes d’emplois et les fermetures d’établissements. Les industries à faible intensité technologique ont davantage été frappées par la crise manufacturière. C’est le sous-secteur du papier et du bois qui connu le plus grand nombre d’événements de restructurations. Ce sous-secteur a aussi subi les pertes d’emplois les plus importantes, suivi par le sous-secteur du textile et du vêtement. Ces deux industries se partagent plus de la moitié des fermetures d’établissements. L’insuffisance de la demande (22,1%), la concurrence internationale (14,3%), la hausse de la valeur du dollar canadien (11,2%), la réorganisation interne de l’entreprise (11,1%), la rationalisation des coûts visant une augmentation de la profitabilité (10,1%) ainsi que les difficultés financières (9,9%) sont les motifs principaux donnés par les employeurs. Nos résultats montrent qu’il y a eu deux temps dans l’évolution de la restructuration du secteur manufacturier au Québec. Un premier temps au début de la période où des changements structurels profonds ont été observés dans certaines industries (p.ex. le bois-papier et le textile-vêtement) et un second temps, en fin de période caractérisé par des changements davantage liés à la conjoncture en raison de la crise économique dont les effets commençaient à se faire sentir à ce moment (Institut de la statistique du Québec, 2009a).

Learning across business sectors: Knowledge sharing between aerospace and construction

This report addresses the extent that managerial practices can be shared between the aerospace and construction sectors. Current recipes for learning from other industries tend to be oversimplistic and often fail to recognise the embedded and contextual nature of managerial knowledge. Knowledge sharing between business sectors is best understood as an essential source of innovation. The process of comparison challenges assumptions and better equips managers to cope with future change. Comparisons between the aerospace and construction sectors are especially useful because they are so different. The two sectors differ hugely in terms of their institutional context, structure and technological intensity. The aerospace sector has experienced extensive consolidation and is dominated by a small number of global companies. Aerospace companies operate within complex networks of global interdependency such that collaborative working is a commercial imperative. In contrast, the construction sector remains highly fragmented and is characterised by a continued reliance on small firms. The vast majority of construction firms compete within localised markets that are too often characterised by opportunistic behaviour. Comparing construction to aerospace highlights the unique characteristics of both sectors and helps explain how managerial practices are mediated by context. Detailed comparisons between the two sectors are made in a range of areas and guidance is provided for the implementation of knowledge sharing strategies within and across organisations. The commonly accepted notion of ‘best practice’ is exposed as a myth. Indeed, universal models of best practice can be detrimental to performance by deflecting from the need to adapt continuously to changing circumstances. Competitiveness in the construction sector too often rests on efficiency in managing contracts, with a particular emphasis on the allocation of risk. Innovation in construction tends to be problem-driven and is rarely shared from project to project. In aerospace, the dominant model of competitiveness means that firms have little choice other than to invest in continuous innovation, despite difficult trading conditions. Research and development (R&D) expenditure in aerospace continues to rise as a percentage of turnovers. A sustained capacity for innovation within the aerospace sector depends crucially upon stability and continuity of work. In the construction sector, the emergence of the ‘hollowed-out’ firm has undermined the industry’s capacity for innovation. Integrated procurement contexts such as prime contracting in construction potentially provide a more supportive climate for an innovation-based model of competitiveness. However, investment in new ways of working depends upon a shift in thinking not only amongst construction contractors, but also amongst the industry’s major clients.

Um estudo sobre a produtividade total dos fatores em setores de diferentes intensidades tecnólogicas

Este trabalho investigou o problema da determinação da produtividade total dos fatores em diversos setores industriais. Tal determinação se dá por meio de estimação de funções de produção, obtendo-se a produtividade a partir do resíduo destas estimações. A questão que aflora deste procedimento é a existência de correlação entre os resíduos e as variáveis explicativas, implicando em diversos vieses, entre eles o de simultaneidade, de variáveis omitidas e de seleção. Neste trabalho foram abordados diversos métodos de estimação de funções de produção, entre eles os métodos de Olley e Pakes e Levinsohn e Petrin. Todos os métodos foram aplicados a diversos setores da economia. A escolha dos setores se deu com base na intensidade tecnológica de cada um, sendo então escolhidos quatro setores de alta intensidade tecnológica e quatro de baixa intensidade tecnológica. A hipótese básica, fio condutor deste trabalho, é que os diversos métodos de estimação de funções de produção apresentam diferentes resultados quando aplicados a setores de diferentes intensidades tecnológicas. Um dos objetivos deste estudo foi identificar se determinado método seria mais adequado a setores de baixa intensidade tecnológica, enquanto outro seria mais apropriado a setores de alta intensidade tecnológica. Conclui-se que o método de Olley e Pakes é levemente superior ao de Levinsohn e Petrin em ambos os grupos de setores, mas não a ponto de se descartar o segundo método. A sensibilidade dos resultados aos diferentes métodos sugere que todos devem ser consultados. Um resultado adicional deste trabalho é a constatação de que houve queda ou estagnação da produtividade nos setores selecionados para a década de 1996 a 2005.

Adoção e difusão de inovação no estado do Pará: uma análise a partir do sistema regional de inovação (1995 - 2006)

Em um contexto econômico em que fatores intangíveis, como inovação e aprendizado assumem cada vez mais importância no processo produtivo, a abordagem sobre sistema de inovação revela-se um importante instrumento de política de desenvolvimento regional. A condição pouco desenvolvida do estado do Pará revela uma economia assentada na produção primária, com baixa intensidade tecnológica e pouca competitividade. Com intuito de demonstrar a capacidade inovadora do estado do Pará na ótica do seu sistema regional de inovação, a pesquisa buscou identificar processos de adoção e difusão de inovação, em três diferentes setores, além de analisar a relação universidade-setor produtivo e a política estadual de C&T. Os resultados demonstraram que apesar da existência de um importante arranjo institucional de P&D, a ausência de interação entre os agentes restringe o processo de geração, difusão e adoção de novas tecnologias no estado, denotando assim sua reduzida capacidade inovadora. Essa condição é agravada pela fragilidade da política estadual de C&T, configurando assim um sistema regional de inovação fragmentado e desarticulado.

Value added trade and structure of high-technology exports in China

This study focuses on the technological intensity of China's exports. It first introduces the method of decomposing gross exports by using the Asian international input–output tables. The empirical results indicate that the technological intensity of Chinese exports has been significantly overestimated due to its high dependency on import content, especially in high-technology exports, an area highly dominated by the electronic and electrical equipment sector. Furthermore, a significant portion of value added embodied in China's high-technology exports comes from services and high-technology manufacturers in neighboring economies, such as Japan, South Korea, and Taiwan.

The determinants of tax haven FDI

This paper examines the determinants of a multinational enterprise’s (MNEs) decision to set up tax haven subsidiaries. We adapt the Firm-specific advantage–Country-specific advantage (FSA–CSA) framework and construct a number of empirically testable hypotheses. The analysis is based on a database covering 14,209 MNEs in twelve OECD countries. We find that the variety of capitalism of a MNEs home location and the level of technological intensity has a strong impact on this decision. We also find that the home country corporate tax rate has a minimal impact. This suggests that corporate tax liberalisation is unlikely to deter MNEs from undertaking this activity.

Padrão de especialização e saldo comercial da China com Estados Unidos, Europa e Ásia no início do Século XXI

The rise of China has been providing various effects on developed and developing countries, particularly its Asian neighbors which compete in third markets, such as the U.S., Europe and Japan this sense, the present study aimed to analyze the pattern of Chinese trade with two different groups of countries: the Asian neighbors (Asian Tigers and Dragons) and developed countries (United States, Europe and Japan) during the 2000s. To this end, this paper adopts the methodology of second breakdown of trade technological intensity proposed by Lall (2000). Furthermore, to analyze the intensity of trade between these economies as well as potential threats over their Chinese business partners close, we calculated the following indicators of trade: Trade Intensity Index (TII), Trade Orientation Index (TOI) , Intra-Industry Trade Index (ICII), Index Of Revealed Comparative Advantage (RCA), and, finally, the Contribution To The Balance Index (ICS). The main result achieved is the existence of China\'s trade patterns differ for each group of countries, according to the type of expertise of each partner.