A socio-technological approach to sharing knowledge across disciplines

Thèse numérisée par la Direction des bibliothèques de l'Université de Montréal.

A socio-technological approach to sharing knowledge across disciplines

Thèse numérisée par la Direction des bibliothèques de l'Université de Montréal.

Collision warning dissemination in vehicles strings : an empirical measurement

Inter-Vehicular Communications (IVC) are considered a promising technological approach for enhancing transportation safety and improving highway efficiency. Previous theoretical work has demonstrated the benefits of IVC in vehicles strings. Simulations of partially IVC-equipped vehicles strings showed that only a small equipment ratio is sufficient to drastically reduce the number of head on collisions. However, these results are based on the assumptions that IVC exhibit lossless and instantaneous messages transmission. This paper presents the research design of an empirical measurement of a vehicles string, with the goal of highlighting the constraints introduced by the actual characteristics of communication devices. A warning message diffusion system based on IEEE 802.11 wireless technology was developed for an emergency breaking scenario. Preliminary results are presented as well, showing the latencies introduced by using 802.11a and discussing early findings and experimental limitations

Point-to-point speed enforcement

This report reviews the use of point-to-point speed enforcement internationally in order to provide principles for better practice for its use in Australia and New Zealand. Point-to-point enforcement is a relatively new technological approach to speed enforcement which involves measuring the average speed of vehicles passing a series of cameras, by using automatic number plate recognition (ANPR) and other technologies. The approach has been implemented or trialled in a number of countries including Australia, New Zealand, the United Kingdom, the Netherlands, Austria, Italy, Switzerland and France. The major research activities were undertaken for the preparation of this report included: (1) an extensive review of the international literature; (2) stakeholder consultation with international and domestic organisations. To date, there have been no formal evaluations of point-to- point speed enforcement in Australia or New Zealand.

Point-to-point speed enforcement : recommendations for better practice

Point-to-point speed cameras are a relatively new and innovative technological approach to speed enforcement that is increasingly been used in a number of highly motorised countries. Previous research has provided evidence of the positive impact of this approach on vehicle speeds and crash rates, as well as additional traffic related outcomes such as vehicle emissions and traffic flow. This paper reports on the conclusions and recommendations of a large-scale project involving extensive consultation with international and domestic (Australian) stakeholders to explore the technological, operational, and legislative characteristics associated with the technology. More specifically, this paper provides a number of recommendations for better practice regarding the implementation of point-to-point speed enforcement in the Australian and New Zealand context. The broader implications of the research, as well as directions for future research, are also discussed.

Enriching architectural design education through interactive displays and local community engagement

Designers have a social responsibility to deal with the needs, issues, and problems that their clients and communities are confronted with. Students of design require opportunities to reflect on their role as social facilitators to develop an attitude towards community engagement through different phases and aspects of their careers. However, current design courses are challenged by compressed timeframes and fragmented scenarios of different academic requirements that do not actively teach community engagement. This paper outlines a participatory and technological approach that was employed to address these issues within the teaching of Architecture and Urban Design at the Queensland University of Technology, Brisbane, Australia. A multi-phase community based research project with actual stakeholders was implemented over a two-year period. Approximately 150 students in the final year of the Bachelor of Design-Architecture; 10 students in the Master of Architecture and 15 students in the Master of Design-Urban Design have informed and influenced each others’ learning through the teaching and research nexus facilitated by this project. The technical approach was implemented in form of a bespoke digital platform that supported the display and discussion of digital media on a series of interactive touch walls. The platform allowed students to easily upload their final designs onto large interactive surfaces, where visitors could explore the media and provide comments. Through the use of this technical platform and the introduction of neogeography, students have been able to broaden their level of interaction and support their learning experience through external structured and unstructured feedback from the local community. Students have not only been exposed to community representatives, but they also have been working in parallel on a specific case study providing each other, across different years and courses, material for reflection and data to structure their design activities.

Integration of technologies for understanding the functional relationship between reef habitat and fish growth and production

Functional linkage between reef habitat quality and fish growth and production has remained elusive. Most current research is focused on correlative relationships between a general habitat type and presence/absence of a species, an index of species abundance, or species diversity. Such descriptive information largely ignores how reef attributes regulate reef fish abundance (density-dependent habitat selection), trophic interactions, and physiological performance (growth and condition). To determine the functional relationship between habitat quality, fish abundance, trophic interactions, and physiological performance, we are using an experimental reef system in the northeastern Gulf of Mexico where we apply advanced sensor and biochemical technologies. Our study site controls for reef attributes (size, cavity space, and reef mosaics) and focuses on the processes that regulate gag grouper (Mycteroperca microlepis) abundance, behavior and performance (growth and condition), and the availability of their pelagic prey. We combine mobile and fixed-active (fisheries) acoustics, passive acoustics, video cameras, and advanced biochemical techniques. Fisheries acoustics quantifies the abundance of pelagic prey fishes associated with the reefs and their behavior. Passive acoustics and video allow direct observation of gag and prey fish behavior and the acoustic environment, and provide a direct visual for the interpretation of fixed fisheries acoustics measurements. New application of biochemical techniques, such as Electron Transport System (ETS) assay, allow the in situ measurement of metabolic expenditure of gag and relates this back to reef attributes, gag behavior, and prey fish availability. Here, we provide an overview of our integrated technological approach for understanding and quantifying the functional relationship between reef habitat quality and one element of production – gag grouper growth on shallow coastal reefs.

黄土丘陵沟壑区数字单元景观研究

根据黄土高原丘陵沟壑区景观的基本特征 ,论述了单元景观的基本概念和分异规律 ,建立了数字单元景观的技术方法 ,并以燕沟为例 ,简要阐述了数字单元景观研究的程序、方法和实践意义

Living in Exospace: ISS and Discovery 1

The concept of exospace, as an alternative liveable structure, is discussed in this article to improve our comprehension of architectural space. Exospace is a man-made space designed for living beyond Earth’s atmosphere. Humankind has developed outerspace technologies to build the International Space Station as a significant experiment in exospace design. The ISS is a new building type for scientific experiments and for testing human existence in outerspace.

A fictional example of exospace, on the other hand, is Discovery 1 spaceship in Stanley Kubrick’s legendary science fiction film 2001: A Space Odyssey (1968). It is a ship travelling to Jupiter with a crew of five astronauts and HAL9000, the artificial intelligence controlling the ship. I will first discuss the ISS, and the space stations built before, from a spatial point of view. A spatial study of Discovery 1 will follow. Finally, through an understanding of exospace, I will return to architectural space with a critical appraisal. The comparison of architectural space with exospace will add to the discussion of space theories from a technological approach.

Exospace creates an alternative reality to architectural space. Architects cannot consider exospaces without comparing them with the spaces they design on Earth. The different context of outerspace shows that a work of terrestrial architecture is very much dependent on its context. A building is not an ‘object’ that can be located anywhere; it is designed for its site. Architectural space is a real, material, continuous, static and extroverted habitable space designed for and used in the specific physical context of Earth. The existence of exospace in science opens a new discussion in architectural theory, both terrestrial and extraterrestrial.

Quality Assurance for GCxGC-FID, Accreditation for TPH CWG Protocol

A new technological approach in the analysis and forensic interpretation of Total Hydrocarbons in soils and waters using 2D Gas Chromatography method (GC-GC) was developed alongside environmental forensic and the assessment models to provide better customer products for the environmental industry.
The objective was to develop an analytical methodology for TPH CWG. Raw data from this method is then to be evaluated for forensic interpretation and risk assessment modelling. Access will be made available to the expertise in methods of forensic tracing contaminant sources, transport modelling, human health risk modelling and detailed quantitative risk assessment.
The quantification of internal standards was key to the development of this method. As the laboratory does not test for TPH in 1D, it was requested during INAB ISO 17025 audit to individually map out where each compound falls chromatographically in the 2D. This was done through comparing carbon equivalent numbers to the n-alkane carbons. This proved e.g. 2-methylnaphthalene has 11 carbons in its structure; its carbon equivalent is 12.84 , the result of which falls within the band of Aromatic eC12-eC16 as opposed to expected eC10-eC12. This was carried out for all 16 PAH (polyaromatic hydrocarbons) and BTEX (benzene, toluene, ethylbenzene and o, m and p-xylenes). The n-alkanes were also assigned to their corresponding aliphatic bands e.g. nC8 would be expected to be in nC8-nC10.
The method was validated through a designated systematic experimental protocol and was challenged with spikes of known concentration of hydrocarbon parameters such as recoveries, precision, bias and linearity. The method was verified by testing a certified reference material which was used as a proficiency round of testing for numerous laboratories.
It is hoped that the method will be used in conjunction with the analysis through Bonn Agreement with their OSINet group. This is a panel of experts and laboratories (including CLS) who forensically identify oil spill contamination from a water source.
This method can prove itself to be a robust method and benefit the industry for contaminated land and water but the method needs to be seen as separate from the regular 1D chromatography. It will help identify contaminants and assist consultants, regulators, clients and scientists valuable information not seen in 1D

Une nouvelle méthode de détection du glaucome par la mesure de l'asymétrie interoculaire : l’asymétrie du rapport de la surface neurorétinienne sur la surface du disque optique ou rim area to disc area asymmetry ratio (RADAAR)

Cette thèse constitue à la fois un apport de nature clinique et technologique dans l’approche diagnostique du glaucome. Plus précisément, nous nous proposons d’étudier une nouvelle façon de détecter le glaucome par la mesure de l’asymétrie du rapport de la surface de l’anneau neurorétinien et de la surface de la papille ou du disque optique ou rim to disc area asymmetry ratio (RADAAR). Pour atteindre cet objectif, nous avons recours à une base de données composée d’une population subdivisée en 4 différents groupes de diagnostic (normal, glaucome possible, glaucome probable et glaucome définitif). Les mesures du RADAAR sont calculées de différentes façons à partir des paramètres stéréométriques de la tête du nerf optique des sujets, produits par la microscopie confocale à balayage laser (Heidelberg Retina Tomograph (HRT) (Heidelberg Engineering, Germany)). Nous procédons à une analyse de données grâce au logiciel SPSS où nous mettons en exergue la distribution du RADAAR dans les différentes populations, sa validité et son utilité dans le dépistage du glaucome. Nous enrôlons donc 523 sujets dans cette étude avec 82 sujets atteints de glaucome définitif. La moyenne d’âge est de 62 ans. Il y a plus de femmes que d’hommes et plus de Caucasiens que d’Africains Caribéens. Nous trouvons que la distribution de la mesure du RADAAR est différente des sujets d’un groupe de diagnostic à l’autre. En termes de performance, la sensibilité de la mesure du RADAAR est très basse c'est-à-dire que sa capacité de détecter la maladie est basse. En revanche la mesure du RADAAR est plus spécifique c'est-à-dire que sa capacité d’identifier les sujets exempts de la maladie est plus grande. Elle tendrait à être aussi plus performante chez les Africains Caribéens que chez les Caucasiens. De même, elle serait plus sensible chez les hommes que chez les femmes. La mesure du RADAAR est utile si on l’associe à une autre méthode de diagnostic comme l’analyse de Régression de Moorfields (MRA) incluse dans le logiciel du HRT3 spécialement lors de la détection du glaucome dans la population à haut risque. En définitive, nous déterminons que la mesure du RADAAR se veut un outil d’aide au diagnostic. Elle est particulièrement intéressante dans le contexte de dépistage de glaucome.

Lecture de l’heure et incapacités intellectuelles : Cahier des Charges d’un cadran évolutif

La présente étude s’inscrit à l’intérieur du programme de recherche mené par le Groupe DÉFI Apprentissage (GDA) de l’Université de Montréal. Notre projet avait pour buts de réaliser les deux premières phases précédant la conception d’une ressource pédagogique qui offrira à l’enfant (6 à 12 ans qui a des incapacités intellectuelles) et à son entourage un dispositif temporel évolutif pour l’initier à la lecture de l’heure et à la gestion des activités de son horaire quotidien à l’âge approprié. Depuis quelques années, maints organismes tels que l’American Association on Mental Retardation (AAMR) , la Classification internationale des déficiences, incapacités et handicaps (CIDIH) de l'Organisation Mondiale de la Santé (OMS), le Ministère de l’éducation, des loisirs et des sports du Québec (MELS) ainsi que le Réseau international sur le processus de production du handicap (RIPPH) soutiennent que les chercheurs doivent s’attarder aux composantes impliquées dans l’interaction Personne-Milieu pour concevoir des stratégies d’intervention auprès de diverses populations qui éprouvent des limitations. Notre recherche adoptera cette démarche en s’appuyant sur les assises suivantes : cadre méthodologique (analyse de la valeur pédagogique), cadre conceptuel (écologie de l’éducation et processus de production du handicap) et cadre technologique (ergonomie).

Conception et développement d'un environnement informatisé d'expérimentations contrôlées et assistées à distance par ordinateur (Ex@O)

La démarche scientifique (ou expérimentale) en milieu scolaire nécessite des savoir-faire expérimentaux qui ne s’acquièrent habituellement qu’en présentiel, c’est-à-dire en laboratoire institutionnel où l’enseignant ou le technicien sont présents et peuvent, à tout moment, assister pleinement l’apprenant dans sa démarche d’investigation scientifique et technologique. Ils peuvent l’orienter, le diriger, susciter sa réflexion, faire des démonstrations réelles ou contrôler son expérimentation en lui montrant comment paramétrer les outils d’expérimentation assistée par ordinateur (ExAO). Pour répondre aux besoins de la formation à distance, cette recherche de développement en didactique des sciences et de la technologie propose de mettre à la disposition des apprenants et des enseignants un environnement de laboratoire informatisé, contrôlé et assisté à distance. Cet environnement, axé sur un microlaboratoire d’ExAO (MicrolabExAO), que nous avons nommé Ex@O pour le distinguer, a été testé de manière fonctionnelle, puis évalué en situation réelle par des étudiants-maîtres et des élèves de l’éducation des adultes qui ont pratiqué et expérimenté la démarche scientifique, en situation de laboratoire réel, mais à distance. Pour ce faire, nous avons couplé le logiciel MicrolabExAO à un logiciel de prise en main à distance avec outils audio et vidéo (Teamviewer). De plus, nous avons créé et inséré, dans le logiciel MicrolabExAO, une aide en ligne pour télécharger et faciliter la prise en main à distance. Puisque cet environnement Ex@O permet de multiplier les contacts des apprenants avec une expérimentation concrète, ce prototype répond bien à l’un des objectifs du Programme de formation de l’école québécoise (PFEQ) qui est de rendre l’apprenant plus actif dans ses apprentissages. Et parce que ce premier prototype d’environnement Ex@O permet d’effectuer des activités en laboratoire à distance, nous avons pu vérifier qu’il met aussi l’accent, non seulement sur les savoirs, mais également sur les savoir-faire expérimentaux en sciences et technologie, traditionnellement développés dans les locaux des laboratoires institutionnels. Notons ici que la démarche expérimentale s’acquiert très majoritairement en laboratoire en pratiquant, souvent et régulièrement, le processus inductif et déductif propre à cette démarche. Cette pratique de la démarche expérimentale, à distance, avec la technologie Ex@O qui l’accompagne, nous a permis de vérifier que celle-ci était possible, voire comparable à la réalisation, pas-à-pas, d’un protocole expérimental effectué dans un laboratoire institutionnel.

Gestão de defesa: o sistema de inovação no segmento de não-guerra

Com o fim da Guerra Fria e os acontecimentos que marcaram o “onze de setembro”, novas ameaças surgiram, impactando negativamente a percepção de segurança coletiva, e impondo profundas modificações nas estruturas e no modo de atuação do Poder Militar de diversas nações. A marginalidade social, o narcotráfico, o crime organizado, a degradação do meio ambiente e outras tantas ameaças, fizeram com que algumas nações se vissem motivadas a empregar suas Forças Armadas, prioritariamente, no combate a estas mazelas, ou seja, nas operações de não-guerra. Este fenômeno vem causando uma ebulição nas ciências militares, com reflexo no campo social, político e econômico, provocando um processo conhecido como “Transformação da Defesa”, que só é viável com a ruptura de alguns modelos tradicionais de administração e com a introdução de uma nova cultura organizacional que promova um ambi-ente adequado ao processo de inovações no setor de Defesa. Para fazer gestão deste processo, deve haver um sistema de inovação setorial de Defesa, já que o atual modelo, conforme apon-tou a investigação, é fragmentado e desarticulado, que produz, fundamentalmente, inovações incrementais e, raramente as de ruptura. Trata-se de um sistema virtual, que não existe for-malmente como tal, mas que possui toda a infraestrutura necessária para funcionar como um sistema formal e gerenciável. A pesquisa, de caráter epistemológico estruturalista, teve por objetivo desenvolver um modelo conceitual para gestão do sistema de inovação do setor de Defesa (segmento de não-guerra), com base em uma estrutura subjacente desvelada, que, de forma oculta, dá suporte ao sistema atual. O desvelamento desta estrutura permitiu concluir que, no campo estudado, os agentes do sistema de inovação, agindo de acordo com seus inte-resses, mobilizam, de forma consciente ou inconsciente, os fatores valorativos da inovação presentes na cultura organizacional em que estão imersos, os quais, juntamente com a influên-cia dos fatores de suporte (o Capital), são fundamentais para a formação de alianças e, em consequência, para o processo de inovação no segmento de não-guerra do setor de Defesa. Como era esperado, o desvelamento da estrutura subjacente propiciou a realização de um di-agnóstico preciso do sistema estudado, permitindo ao pesquisador o lançamento de um olhar crítico sobre o mesmo, o que contribui para a proposição de uma intervenção segura no modelo vigente. O modelo proposto buscou incentivar, também, a criação, o avanço e a difusão das inovações não-tecnológicas, contrapondo-se ao atual, que privilegia fundamentalmente a abordagem tecnológica. Adicionalmente, foram sugeridas algumas medidas, no sentido de incrementar as interações entre os principais agentes do sistema.