International partner selection Indian technical textile market

Due to a combination of a vast agricultural industry and a tremendously growing technical textile industry, Ludvig Svensson identified India as target market for possible expansion through domestic production and supply. However, Svensson needed additional information about the industry structure and key players. Therefore, this project focused on a detailed analysis of the technical textile market and its players by following the international partner selection process. Thereby, five key players were identified as potential partners, as well as the need for additional research to determine alternative entry modes, as the market does not currently seem to be receptive for Svensson products.

Production of banana fiber yarns for technical textile reinforced composites

[EN]Natural fibers have been used as an alternative to synthetic ones for their greener character; banana fibers have the advantage of coming from an agricultural residue. Fibers have been extracted by mechanical means from banana tree pseudostems, as a strategy to valorize banana crops residues. To increase the mechanical properties of the composite, technical textiles can be used as reinforcement, instead of short fibers. To do so, fibers must be spun and woven. The aim of this paper is to show the viability of using banana fibers to obtain a yarn suitable to be woven, after an enzymatic treatment, which is more environmentally friendly.

Design and process selection for joints in flexible materials

The application of high performance textiles has grown significantly in the last 10 to 15 years. Various research groups throughout the United Kingdom, such as the Department of Trade and Industry, have identified technical textiles as a field for future development. There is little design guidance for joining of flexible materials or general property models that can be applied to theses materials. This lack is due to the large diversity of properties, structures and resulting behaviours of the materials that are classified as "Flexible Materials". This dissertation explores the issues that are involved in characterising the materials at the fibre, bulk and textile levels. Different units of measurement are used for each stage of the manufacturing process of flexible materials and this disparity creates problems when trying to make general comparisons (e.g. comparing textiles to polymer films). Thus, a possible solution to this is to create selection charts that allow designers to compare the strength of materials for a given mass per unit area. A design tool was created using the Cambridge Engineering Selector (CES) software to enable the selection of joining processes for material. The tool is effective in selecting a reduced number of viable joining processes. Through case studies it was shown that designers are required to examine the selected processes (identified by the software) in greater detail - in particular the economics and geometry of the joint - in order to identify the optimum joining process.

Desenvolvimento de têxteis técnicos para reforço de compósitos poliméricos

Materials denominated technical textiles can be defined as structures designed and developed with function to fulfill specific functional requirements of various industrial sectors as are the cases of the automotive and aerospace industries. In this aspect the technical textiles are distinguished from conventional textile materials, in which the aesthetic and of comfort needs are of primordial importance. Based on these considerations, the subject of this dissertation was established having as its main focus the study of development of textile structures from aramid and glass fibers and acting in order to develop the manufacture of composite materials that combine properties of two different structures, manufactured in an identical operation, where each structure contributes to improving the properties of the resulting composite material. Therefore were created in laboratory scale, textile structures with low weight and different composition: aramid (100%), glass (100%) and aramid /glass (65/35%), in order to use them as a reinforcing element in composite materials with polyester matrix. These composites were tested in tension and its fracture surface, evaluated by MEV. Based on the analysis of mechanical properties of the developed composites, the efficiency of the structures prepared as reinforcing element were testified by reason of that the resistance values of the composites are far superior to the polyester matrix. It was also observed that hybridization in tissue structure was efficient, since the best results obtained were for hybrid composites, where strength to the rupture was similar to the steel 1020, reaching values on the order of 340 MPa

Avaliação da estrutura de tecidos técnicos como elemento reforçante em compósitos poliméricos sistema poliéster isoftálico

Materials known as technical textiles can be defined as structures designed and developed to meet specific functional requirements of various industry sectors, which is the case in automotive and aerospace industries, and other specific applications. Therefore, the purpose of this work presents the development and manufacture of polymer composite with isophthalic polyester resin. The reinforcement of the composite structure is a technical textile fabric made from high performance fibers, aramid (Kevlar 49) and glass fiber E. The fabrics are manufactured by the same method, with the aim of improving the tensile strength of the resulting polymer composite material. The fabrics, we developed some low grammage technical textile structures in laboratory scale and differentiated-composition type aramid (100%), hybrid 1 aramid fiber / glass (65/35%) and hybrid 2 aramid fiber / glass (85/15% ) for use as a reinforcing element in composite materials with unsaturated isophthalic polyester matrix. The polymer composites produced were tested in uniaxial tensile fracture surface and it´s evaluated by SEM. The purpose of this work characterize the performance of polymer composites prepared, identifying changes and based on resistance to strain corresponding to the mechanical behavior. The objectives are to verify the capability of using this reinforcement structure, along with the use of high performance fibers and resin in terms of workability and mechanical strength; verify the adherence of the fiber to the matrix and the fracture surface by electron microscopy scanning and determination of tensile strength by tensile test. The results indicate that, in a comparative study to the response of uniaxial tensile test for tensile strength of the composites and the efficiency of the low percentage of reinforcement element, being a technical textile fabric structure that features characteristic of lightness and low weight added in polymer composites

Technical Efficiency in the Indian Textiles Industry: A Nonparametric Analysis of Firm-Level Data

The Indian textiles industry is now at the crossroads with the phasing out of quota regime that prevailed under the Multi-Fiber Agreement (MFA) until the end of 2004. In the face of a full integration of the textiles sector in the WTO, maintaining and enhancing productive efficiency is a precondition for competitiveness of the Indian firms in the new liberalized world market. In this paper we use data obtained from the Annual Survey of Industries for a number of years to measure the levels of technical efficiency in the Indian textiles industry at the firm level. We use both a grand frontier applicable to all firms and a group frontier specific to firms from any individual state, ownership, or organization type in order to evaluate their efficiencies. This permits us to separately identify how locational, proprietary, and organizational characteristics of a firm affect its performance.

Technical Vocabulary and Medieval Text Types: A Semantic Field Approach

This paper seeks to discover in what sense we can classify vocabulary items as technical terms in the later medieval period. In order to arrive at a principled categorization of technicality, distribution is taken as a diagnostic factor: vocabulary shared across the widest range of text types may be assumed to be both prototypical for the semantic field, but also the most general and therefore least technical terms since lexical items derive at least part of their meaning from context, a wider range of contexts implying a wider range of senses. A further way of addressing the question of technicality is tested through the classification of the lexis into semantic hierarchies: in the terms of componential analysis, having more components of meaning puts a term lower in the semantic hierarchy and flags it as having a greater specificity of sense, and thus as more technical. The various text types are interrogated through comparison of the number of levels in their hierarchies and number of lexical items at each level within the hierarchies. Focusing on the vocabulary of a single semantic field, DRESS AND TEXTILES, this paper investigates how four medieval text types (wills, sumptuary laws, petitions, and romances) employ technical terminology in the establishment of the conventions of their genres.

Luxurious Merovingian Textiles Excavated from Burials in the Saint Denis Basilica, France, 6th-7th century

A new examination of the textile fragments found in the Merovingian burials in the basilica of Saint Denis, near Paris, has recently underscored the diversity of fabrics used to make garments in which members of the royal court were buried. Among them, some woolens of fine quality had been dyed with indigotin. The most astonishing fibre found belongs to a mixed textile (not skin) with beaver fibers and wool. Silks contained shellfish purple and in one case kermes? Two dyestuffs associated with royalty and privilege. Along with this was large number of gold threads, probably produced locally and that were used in tablet-woven borders or for embroideries. In addition, several figured silks, of oriental origin, testify to the importance of this "foreign" material and the taste for textiles woven with complex techniques and probably what had originally had beautiful designs. Although none of these designs have been preserved and many colors have been greatly damaged, the technical characteristics of the remnants indicate proveniences as far as Byzantium, Sassanid Persia and the Chinese court. Such precious textiles show the high social status and political power of the Merovingian court, a testament to their ability to access such luxurious and costly textiles through diplomacy and/or trade with other powerful empires. The examination of these rare textiles along with other fine silks and luxury objects from the same period found in France expand our view of the fundamental role of textiles in the political sphere of this early period of European history.

Flammability characteristics of vehicle interior materials. Final technical report.

National Highway Safety Bureau, Washington, D.C.

Assessment of industrial hazardous waste practices : textiles industry /

"SW-125C."