Preparation and characterisation of "Y-Fe203 as tape recording material

Optimum conditions for the preparation of tape recording quality Y-Fe20 s by the thermal decomposition of ferrous oxalate dihydrate have been established. Formation of the intermediate F%O~ which is most important in forming Y-FezO 3 takes place only in the presence of water vapour. Various stages of decomposition have been characterised by DTA, TG, DTG, and x-ray powder diffraction. The method for the preparation of acicular "Y-Fe208 that matches very well with the commercial tape recording material has been developed

The tribology of linear tape recording systems

This thesis is devoted to the tribology at the head~to~tape interface of linear tape recording systems, OnStream ADRTM system being used as an experimental platform, Combining experimental characterisation with computer modelling, a comprehensive picture of the mechanisms involved in a tape recording system is drawn. The work is designed to isolate the mechanisms responsible for the physical spacing between head and tape with the aim of minimising spacing losses and errors and optimising signal output. Standard heads-used in ADR current products-and prototype heads- DLC and SPL coated and dummy heads built from a AI203-TiC and alternative single-phase ceramics intended to constitute the head tape-bearing surface-are tested in controlled environment for up to 500 hours (exceptionally 1000 hours), Evidences of wear on the standard head are mainly observable as a preferential wear of the TiC phase of the AI203-TiC ceramic, The TiC grains are believed to delaminate due to a fatigue wear mechanism, a hypothesis further confirmed via modelling, locating the maximum von Mises equivalent stress at a depth equivalent to the TiC recession (20 to 30 nm). Debris of TiC delaminated residues is moreover found trapped within the pole-tip recession, assumed therefore to provide three~body abrasive particles, thus increasing the pole-tip recession. Iron rich stain is found over the cycled standard head surface (preferentially over the pole-tip and to a lesser extent over the TiC grains) at any environment condition except high temperature/humidity, where mainly organic stain was apparent, Temperature (locally or globally) affects staining rate and aspect; stain transfer is generally promoted at high temperature. Humidity affects transfer rate and quantity; low humidity produces, thinner stains at higher rate. Stain generally targets preferentially head materials with high electrical conductivity, i.e. Permalloy and TiC. Stains are found to decrease the friction at the head-to-tape interface, delay the TiC recession hollow-out and act as a protective soft coating reducing the pole-tip recession. This is obviously at the expense of an additional spacing at the head-to-tape interface of the order of 20 nm. Two kinds of wear resistant coating are tested: diamond like carbon (DLC) and superprotective layer (SPL), 10 nm and 20 to 40 nm thick, respectively. DLC coating disappears within 100 hours due possibly to abrasive and fatigue wear. SPL coatings are generally more resistant, particularly at high temperature and low humidity, possibly in relation with stain transfer. 20 nm coatings are found to rely on the substrate wear behaviour whereas 40 nm coatings are found to rely on the adhesive strength at the coating/substrate interface. These observations seem to locate the wear-driving forces 40 nm below the surface, hence indicate that for coatings in the 10 nm thickness range-· i,e. compatible with high-density recording-the substrate resistance must be taken into account. Single-phase ceramic as candidate for wear-resistant tape-bearing surface are tested in form of full-contour dummy-heads. The absence of a second phase eliminates the preferential wear observed at the AI203-TiC surface; very low wear rates and no evidence of brittle fracture are observed.

Transfer films and their effect on signal errors for helical scan data tape recording systems

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

The tribology of laminated magnetic recording heads

This thesis investigates the mechanisms that lead to pole tip recession (PTR) in laminated magnetic recording heads (also known as "sandwich heads"). These heads provide a platform for the utilisation of advanced soft magnetic thin films in practical recording heads suitable for high frequency helical scan tape recording systems. PTR results from a differential wear of the magnetic pole piece from the tape-bearing surface of the head. It results in a spacing loss of the playback or read signal of 54.6dB per recording wavelength separation of the poles from the tape. PTR depends on the material combination used in the head, on the tape type and the climate - temperature and relative humidity (r.h.). Five head materials were studied: two non-magnetic substrate materials- sintered multi granular CaTi03 and composite CaTi03/ZrTi04/Ti02 and three soft magnetic materials- amorphous CoNbZr, and nanocrystalline FeNbSiN and FeTaN. Single material dummy heads were constructed and their wear rates measured when cycling them in a Hi-8 camcorder against commercially available metal particulate (MP) and metal evaporated (ME) tapes in three different climates: 25°C/20%r.h., 25°C/80%r.h. and 40°C/80%r.h. X-ray photoelectron spectroscopy (XPS) was used to examine changes the head surface chemistry. Atomic force microscopy (AFM) was used to examine changes in head and tape surface topography. PTR versus cycling time of laminated heads of CaTi03/ZrTiO4/Ti02 and FeTaN construction was measured using AFM. The principal wear mechanism observed for all head materials was microabrasion caused by the mating body - the tape surface. The variation in wear rate with climate and tape type was due to a variation in severity in this mechanism, except for tape cycling at 40°C in which gross damage was observed to be occurring to the head surface. Two subsidiary wear mechanisms were found: third body scratching (all materials) and grain pullout (both ceramics and FeNbSiN). No chemical wear was observed, though tribochemical reactions were observed on the metal head surfaces. PTR was found to be caused by two mechanisms - the first differential microabrasion of the metal and substrate materials and which was characterised by a low (~10nm) equilibrium value. The second was by deep ploughing by third body debris particles, thought mainly to be grain pullout particles. This level of PTR caused by this mechanism was often more severe, and of a non-equilibrium nature. It was observed more for ME tape, especially at 40°C/80%r.h. and 25°c/20%r.h. Two other phenomena on the laminated head pole piece were observed and commented upon: staining and ripple texturing.

An Interview with Sylvère Lotringer, Jean Baudrillard Chair at the European Graduate School and Professor Emeritus of French Literature and Philosophy at Columbia University, on the Architectural Contribution to Semiotext(e), Schizoculture, and the Early Deleuze and Guattari Scene at Columbia University

An Interview with Sylvère Lotringer, Jean Baudrillard Chair at the European Graduate School and Professor Emeritus of French Literature and Philosophy at Columbia University, on the Architectural Contribution to Semiotext(e), Schizoculture, and the Early Deleuze and Guattari Scene at Columbia University, which took place at the Department of French, Columbia University, New York City, July 2003. This interview exists as an audio cassette tape recording.

Philip Slomovitz South End collection 1969-1974

Contains 1969 and 1971-73 issues of The South End, Wayne State University student paper, as well as correspondence, public statements, petitions and a tape-recording relating to controversies generated by the printing of alleged anti-Zionist/anti-Semitic articles in the newspaper. The correspondence consists for the most part of an exchange of letters between university officials, Jewish community leaders and Leonard N. Simons, a Detroit advertising executive, during the 1969 controversy, and correspondence with Philip Slomovitz, editor of the Detroit Jewish news, in 1972-73. The tape recording is of a February 2, 1969 interview with John Watson, editor of the South end.

Communication practices in physician decision-making for an unstable critically ill patient with end-stage cancer.

BACKGROUND: Shared decision-making has become the standard of care for most medical treatments. However, little is known about physician communication practices in the decision making for unstable critically ill patients with known end-stage disease. OBJECTIVE: To describe communication practices of physicians making treatment decisions for unstable critically ill patients with end-stage cancer, using the framework of shared decision-making. DESIGN: Analysis of audiotaped encounters between physicians and a standardized patient, in a high-fidelity simulation scenario, to identify best practice communication behaviors. The simulation depicted a 78-year-old man with metastatic gastric cancer, life-threatening hypoxia, and stable preferences to avoid intensive care unit (ICU) admission and intubation. Blinded coders assessed the encounters for verbal communication behaviors associated with handling emotions and discussion of end-of-life goals. We calculated a score for skill at handling emotions (0-6) and at discussing end of life goals (0-16). SUBJECTS: Twenty-seven hospital-based physicians. RESULTS: Independent variables included physician demographics and communication behaviors. We used treatment decisions (ICU admission and initiation of palliation) as a proxy for accurate identification of patient preferences. Eight physicians admitted the patient to the ICU, and 16 initiated palliation. Physicians varied, but on average demonstrated low skill at handling emotions (mean, 0.7) and moderate skill at discussing end-of-life goals (mean, 7.4). We found that skill at discussing end-of-life goals was associated with initiation of palliation (p = 0.04). CONCLUSIONS: It is possible to analyze the decision making of physicians managing unstable critically ill patients with end-stage cancer using the framework of shared decision-making.

Negotiation of risk in sexual relationships and reproductive decision-making amongst HIV sero-different couples

The paper focuses on the ways in which medical discourses of HIV transmission risk, personal bodily meanings and reproductive decision-making are re-negotiated within the context of sero-different relationships, in which one partner is known to be HIV-positive. Eighteen in-depth interviews were conducted with 10 individuals in Northern Ireland during 2008–2009. Drawing on an embodied sociological approach, the findings show that physical pleasure, love, commitment, a desire to conceive without medical interventions and a dislike of condoms within regular ongoing relationships, shaped individuals' sense of biological risk. In addition, the subjective logic that a partner had not previously become infected through unprotected sex prior to knowledge of HIV status and the added security of an undetectable viral load significantly impacted upon women's and, especially, men's decisions to have unprotected sex in order to conceive. The findings speak to the importance of reframing public health campaigns and clinical counselling discourses on HIV risk transmission to acknowledge how couples negotiate this risk, alongside pleasure and commitment within ongoing relationships.

Os jogos com regras na perspectiva do desenho universal: contribuições à educação matemática inclusiva

To think about a school that is for everyone has been a challenge for many people connected to education worldwide demanding from researchers of each level of knowledge an association to such effort. The study presented on this paper unites itself to the voices, movements and researches of these scholars, seeking to contribute on building possibilities on which mathematics can be thought and worked on schools in order for every student to learn, whether they have some sort of deficiency, disorders, syndromes or not. This essay has the goal to investigate the possibilities of inclusive pedagogical practices mediated by math games with rules, developed and used throughout the Universal Design perspective; a qualitative research took place with a collaborative methodology that involved managers, teachers and students from a public school situated on the city of Natal/Brazil. On the investigation math games with rules were developed and made according to the Universal Design concept, starting from initial studies which articulated theoretical groundings to the reality of school and the teacher s conceptions. After that, classes using these tools were planned collectively which oriented inclusive pedagogical practices of classes from the 1st to the 4th year of elementary school. Throughout the process many instruments such as: tape recording, video footages, notes from the researcher; the teachers and the students were used for constant work evaluation and also to record the research data. In the end, the data indicated effective contributions of the mediated pedagogical practices by games with rules under the perspective of Universal Design for Inclusive Mathematics Education

Visual communication in Brazilian species of anurans from the Atlantic forest

Visual communication is widespread among several anuran families, but seems to be more common than currently thought. We investigated and compared visual communication in six species of an anuran community in the Brazilian Atlantic forest. Four are nocturnal species: Hyalinobatrachium uranoscopum (Centrolenidae), Hyla albomarginata, Hyla sp. (aff. ehrhardti), and Scinax eurydice (Hylidae), and two are diurnal species: Hylodes phyllodes and Hylodes asper ( Leptodactylidae). For H. uranoscopum, H. albomarginata, S. eurydice, and H. phyllodes, this is the first record of visual communication. Observations were made at Nucleo Picinguaba, Parque Estadual da Serra do Mar, in the Municipality of Ubatuba, State of São Paulo, Brazil. Descriptions of behaviour were based on individuals observed in the field, using sequence sampling with continuous tape recording for behavioural observations. Eight new behaviours are described: body wiping, face wiping, jump display, leg kicking, limb lifting, mouth opening, toe flagging, and vocal sac display. of the 42 anuran species known from Nucleo Picinguaba, at least six ( approximately 14%) display visual communication. The evolution of visual signals in these species may be related to the availability of ambient light, the structural complexity of the habitat, and/or the ambient noise. They may also have evolved to aid in the location of the individual, to avoid physical combat, and/or may be a by-product of seismic communication.

Ler e escrever: mediação entre crianças pequenas

Pós-graduação em Educação Escolar - FCLAR

Variation in spoken discourse in and beyond the english foreign language classroom : a comparative study

This study is concerned with one of the most interesting and the least well-researched areas in contemporary research on classroom interaction: that of the discourse variability exhibited by participants. It investigates the way in which the language of native speakers (NSs) as well as that of non-native speakers (NNSs) may vary according to the circumstances under which it is produced. The study, therefore, attempts to characterise the performance of both NSs and NNSs (with particular emphasis placed on the latter) in various types of interaction in and beyond the EFL classroom. These are: Formal Interview (FI), Formal Classroom Interaction (FCI), Informal Classroom Interaction (ICI), Informal Classroom Discussion (ICD), and Informal Conversation (IC). The corpus of the study consisted of four NSs and fifteen NNSs. Both a video and a tape recording was made for each type of interaction, with the exception of the IC which was only audio-recorded so as not to inhibit the natural use of language. Each lasted for 35 minutes. The findings of the study mark clearly the distinction between the `artificiality' of classroom interaction and the `naturalness' or `authenticity' of non-classroom discourse. Amongst the most interesting findings are the following: Unlike both FCI and ICI, in the FI, ICD, and IC, the language of NNSs was characterised by: greater quantity of oral output, a wider range of errors, the use of natural discourse strategies such as holding the floor and self-correction, and a greater number of initiations in both ICD and IC. It is suggested that if `natural' or `authentic' discourse is to be promoted, the incorporation of FI, ICD, and IC into the EFL classroom activities is much needed. The study differs from most studies on classroom interaction in that it attempts to relate work in the EFL classroom to the `real' world as its prime objective.

An investigation of thin film magnetic recording media

Mechanical, physical and chemical changes in the surface of commercial thin film metal evaporated magnetic recording media have been correlated to recording error and signal degradation measurements. Modified and adapted commercial Hi-8 video recorders have been used for sample generation whilst analytical techniques such as SXPS,IMS and SEM have been employed in the surface characterisation. The durability of the media was assessed through stop motion (still frame) and cycling tests, where error growth and signal degradation were measured as a function of running time. The tests were performed under ambient (22°C, 40% RH) and high humidity (22°C, 80% RH) conditions. Characterisation of the lubricant layer on each tape was performed through models based on XPS and angle resolved XPS. The lubricant thickness can significantly affect the durability and signal output level of a thin film tape and thus it is important that reliable quantification can be achieved. Various models were considered for determining the lubricant thickness although ultimately, the most suitable technique was deemed to be a model that assumed a uniform layer structure. In addition to thin film metal evaporated media, equivalent durability tests and surface analysis experiments were performed using a commercial metal particle tape in order that comparisons could be made between the two types of recording media. The signal performance of the thin film metal evaporated media was found to be quite different from that for the metal particle tape since dropout errors and signal degradation increased at a much earlier stage. Extensive surface analyses enabled the mechanisms responsible for media failure and error growth to be identified in the ME and MP tapes and these were found to result from cyclic stressing and fatigue on the immediate substrate of the media.

Pole tip recession in linear tape systems

The tribology of linear tape storage system including Linear Tape Open (LTO) and Travan5 was investigated by combining X-ray Photoelectron Spectroscopy (XPS), Auger Electron Spectroscopy (AES), Optical Microscopy and Atomic Force Microscopy (AFM) technologies. The purpose of this study was to understand the tribology mechanism of linear tape systems then projected recording densities may be achieved in future systems. Water vapour pressure or Normalized Water Content (NWC) rather than the Relative Humidity (RH) values (as are used almost universally in this field) determined the extent of PTR and stain (if produced) in linear heads. Approximately linear dependencies were found for saturated PTR increasing with normalized water content increasing over the range studied using the same tape. Fe Stain (if produced) preferentially formed on the head surfaces at the lower water contents. The stain formation mechanism had been identified. Adhesive bond formation is a chemical process that is governed by temperature. Thus the higher the contact pressure, the higher the contact temperature in the interface of head and tape, was produced higher the probability of adhesive bond formation and the greater the amount of transferred material (stain). Water molecules at the interface saturate the surface bonds and makes adhesive junctions less likely. Tape polymeric binder formulation also has a significant role in stain formation, with the latest generation binders producing less transfer of material. This is almost certainly due to higher cohesive bonds within the body of the magnetic layer. TiC in the two-phase ceramic tape-bearing surface (AlTiC) was found to oxidise to form TiO2.The oxidation rate of TiC increased with water content increasing. The oxide was less dense than the underlying carbide; hence the interface between TiO2 oxide and TiC was stressed. Removals of the oxide phase results in the formation of three-body abrasive particles that were swept across the tape head, and gave rise to three-body abrasive wear, particularly in the pole regions. Hence, PTR and subsequent which signal loss and error growth. The lower contact pressure of the LTO system comparing with the Travan5 system ensures that fewer and smaller three-body abrasive particles were swept across the poles and insulator regions. Hence, lower contact pressure, as well as reducing stain in the same time significantly reduces PTR in the LTO system.