Aspectos físicos e fisiológicos de sementes de Fimbristylis dicothoma relacionados à germinação e dormência

In the seeds of pioneer plants, the application of treatments for breaking dormancy, and selection by colour and size, are strategies for obtaining seeds of less dormancy and better germination performance. The aim of this study was to evaluate the effect of the physical and physiological aspects of seeds of the tall fringe-rush (Fimbristylis dichotoma) on germination and dormancy. To do this, the seeds were submitted to the following treatments in three studies: (i) control, immersion in H2SO4 (98%, 36N) for 1 minute, immersion in KNO3 (1, 2 and 3%) for 15 minutes, seeding on a substrate moistened with KNO3 (0.2%) and exposure for 5 and 10 hours in a forced air circulation oven at 40 and 70 degrees C; (ii) classification of the seeds by colour (light and dark) and application of the following treatments: control, immersion of the seeds in H2SO4 (98%, 36N) for 1 and 2 minutes, immersion in KNO3 (5% and 10%) for 15 and 30 minutes and seeding on a substrate moistened with KNO3 (0.2%); (iii) classification by size (0.60, 0.50 and 0.40 mm) and germination on a substrate moistened with KNO3 (0.2%) or distilled H2O. The seeds were evaluated by germination test, first count and germination speed index. Moistening the substrate with KNO3 (0.2%), and heat treatment at 40 degrees C for 10 hours improve performance in seeds of the tall fringe-rush. Light-coloured seeds do not display dormancy. Medium-sized seeds of the tall fringe-rush show better performance in terms of percentage and speed of germination.

Characterization of humic substances in salt marsh soils under sea rush (Juncus maritimus)

Humic substances (HS) from salt marsh soils were characterized and the relationships among HS composition and some geochemical factors were analysed. For this, three salt marshes with the same vegetation cover (Juncus maritimus), but with different geochemical characteristics, were selected. The qualitative characterization of the soil humic acids and fulvic acids was carried out by elemental analysis, FTIR spectroscopy, fluorescence spectroscopy and VACP/MAS (13)C NMR spectroscopy. HS from salt marsh soils under sea rush (Juncus maritimus) displayed some shared characteristics such as low degree of humification, low aromatic content and high proportion of labile compounds, mainly polysaccharides and proteins. However, although the three salt marsh soils under study were covered by the same type of vegetation, the HS showed some important differences. HS composition was found to be determined not only by the nature of the original organic material, but also by environmental factors such as soil texture, redox conditions and tidal influence. In general. an increase in the humification process appeared to be related to aerobic conditions and predominance of sand in the mineral fraction of the soil, while the preservation of labile organic compounds may be associated with low redox potential values and fine soil texture. (C) 2008 Elsevier Ltd. All rights reserved.

The effects of Australian tall poppy attitudes on American value based leadership theory

A survey study of twenty-two Australian CEOs and their subordinates assessed relationships between Australian leader motives, Australian value based leader behaviour, subordinate tall poppy attitudes and subordinate commitment, effectiveness, motivation and satisfaction (CEMS). On the whole, the results showed general support for value based leadership processes. Subsequent regression analyses of the second main component of Value Based Leadership Theory, value based leader behaviour, revealed that the collectivistic, inspirational, integrity and visionary behaviour sub-scales of the construct were positively related with subordinate CEMS. Although the hypothesis that subordinate tall poppy attitudes would moderate value based leadership processes was not clearly supported, subsequent regression analyses found that subordinate tall poppy attitudes were negatively related with perceptions of value based leader behaviour and CEMS. These findings suggest complex relationships between the three constructs, and the proposed model for the Australian context is accordingly amended. Overall, the research supports the need to consider cultural-specific attitudes in management development.

Domestic violence in the urban fringe

Police call data for domestic violence incidents in the city of Brisbane were used to further explore the locational disadvantage thesis. It was hypothesised that the supposed additional burdens and stresses on disadvantaged families living in the outer suburbs may be reflected in significantly higher rates of reported domestic violence. Using an index of relative socioeconomic disadvantage and employing Analysis of Variance (ANOVA), this research shows that significantly higher rates of reported domestic violence occur in the inner suburbs relative to the middle or outer suburbs of Brisbane. This finding adds further doubt as to the magnitude of locational disadvantage impacts on outer suburban low income family households.

Influence of hysteresis on tidal capillary fringe dynamics in a well-sorted sand

Nielsen and Perrochet [Adv. Water Resour. 23 (2000) 503] presented experimental data for cyclic water movement in the vadose zone above an oscillating watertable. The response of the watertable to cyclic forcing was characterised by the ratios of the forcing head to watertable amplitudes and their associated phase lag. They found that their non-hysteretic Richards' equation model failed to represent the observed behaviour of these parameters. This paper explores the effect on the simulated capillary fringe dynamics (in terms of these parameters) of including varying degrees of hysteresis in the moisture retention curve used in a numerical model of their experiment. It is clear that hysteresis can indeed account for observed discrepancies between simulation and experiment and that the effect of hysteresis varies with the frequency of oscillation. The use of a single-valued mean retention curve, as advocated by some authors, fails to provide a match between the simulated and observed behaviour of the Nielsen and Perrochet parameters, but is shown to be adequate for predicting time-averaged soil moisture profiles. (C) 2003 Elsevier Ltd. All rights reserved.

A presença meso-assíria no Médio Eufrates: o contributo da cerâmica de Tall Qabr Abū al-'Atīq (Deir ez-Zor, Síria)

Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Arqueologia.

An evaluation of Seth E. Meek's contributions to Mexican ichthyology / Robert Rush Miller.

v.69:no.1(1976)

Ecological relations between mangrove leaf litter and the spatial distribution of the gastropod Melampus coffeus in a fringe mangrove forest

Leaf litter represents a food source to many organisms that may directly contribute to organic matter decomposition. In addition, the physical presence of these vegetal detritus contributes for the modification of some environmental areas and produce microhabitats that may act as a refuge against predators and desiccation for many animals. The pulmonate gastropod Melampus coffeus (Linnaeus, 1758) (Ellobiidae) is a very common specie in Atlantic Coast mangrove forests and feeds on fallen mangrove leaves. It was hypothesized that the spatial distribution of Melampus coffeus is directly affected by mangrove leaf litter biomass deposition. Thus, this research aimed at evaluating the spatial distribution of these gastropods in relation to the biomass of mangrove leaf litter through a twelve-month period. The study area was established in the middle estuary of Pacoti River, state of Ceará, Brazil where two adjacent zones with different topographic profiles were determined. Samples of Melampus coffeus and leaf litter were collected monthly, throughout a year, from the mangrove ground surface. The results indicated that the presence of twigs in mangrove litter favor the occupation by smaller individuals of M. coffeus, probably because smaller individuals are more susceptible to predator attacks and desiccation than larger ones, and twigs and branches may provide a safe microhabitat.

Estudi del procés de tall per a la millora dels esbocats en materials AHSS

En aquest projecte es presenta un estudi sobre punxonats i esbocats per a materials d’Alt límit elàstic (Acers AHSS; Advanced High Strength Steels), amb l’objectiu d’aconseguir saber quin és el millor procés de tall per aconseguir esbocats correctes. Utilitzant la premsa hidràulica de la Fundació Centre Tecnològic de Manresa (CTM) es realitza el punxonat i els esbocats a tots els materials per tal d’avaluar el seu comportament alhora de ser esbocats. A partir d’aquests resultats obtindrem les gràfiques de ràtio d’esbocat per a cadascun dels materials en els diferents sentits de esbocat. Com a mètode alternatiu del procés de tall, es realitzen unes mostres amb tall per aigua. S’observarà si els esbocats trenquen o no trenquen i en quines condicions ho fan. Una vegada realitzats aquests assajos, es procedirà a realitzar l’estudi de microdureses amb un indentador Vickers per tal de comprovar l’afectació de l’operació de tall en la microestructura del material. Es realitzarà també algun perfil de dureses utilitzant el Nanoindentador. Per finalitzar el projecte, s’inclourà un apartat de conclusions i un estudi mediambiental produït com a conseqüència de l’elaboració del projecte, així com un pressupost total d’aquest.

The global uranium rush and its Africa frontier. Lessons from Namibia

Uranium mines are the - often forgotten - source of nuclear power. The promotion of nuclear energy as a clean alternative and the projected increase of electricity demand in countries such as China and India, have led to a global “uranium rush”, unseen since the peak of the Cold War. This article studies the formation of the expanding nuclear frontier looking at the interaction between the global uranium metabolism, industrial dynamics and local ecologies of resistance using Namibia as a case-study. Namibia, the world´s fourth largest producer of uranium, stands at the frontier of this rush with sixty-six recently granted prospecting licenses that could turn into mines, compared to only three currently operating mines. We focus on three generic attributes that help to explain the emergence and intensity of resistance by local communities to uranium mining: the ecology and geography of the resource; the degree and type of political and economic marginalization of the community; and crucially, the connection and integration of local concerns with broader social movements and political demands. We show with the use of empirical material how these factors play out differently in five Namibian communities that have been, or stand to be, affected by uranium mining, and explain how local ecologies of resistance shape the global uranium rush.

Automatització d’una màquina de tall rotatiu

Molt sovint, a l’indústria de l’alimentació o de la cosmètica, hi ha promocions on s’afegeixen productes de regal; aquests els embalen amb un sleever (tipus de plàstic força rígid) que després retractilen. Aquestes promocions solen ser esporàdiques i canviants i això fa que no sigui factible la modificació de la línia de producció general per a realitzar-les. Per aquest motiu, moltes empreses disposen d’una petita màquina de tall rotatiu per a poder tallar els sleevers ells mateixos, i així tallar a molta velocitat i precisió aquestes petites produccions. Així doncs, esdevé molt interessant l’adquisició d’aquest tipus de maquinària. L’objectiu del projecte és fer l’automatització d’una màquina que pugui tallar aquest tipus de material ràpidament per fer-lo rentable

Disseny i projecte per a la construcció d’una màquina per a realitzar el tall a les castanyes

L’objecte del present projecte es el de realitzar el disseny per a la construcció d’unamàquina per fer el tall de castanyes. Aquesta maquina inclourà la estructura, tolva d’alimentació, mecanisme de tall i sistema de seguretat. Un cop realitzat el tall a la castanya, aquesta serà evacuada per gravetat. L’alimentació dins la tolva i l’extracció del producte tallat es realitzarà manualment