983 resultados para TRAP-NESTS
Resumo:
Bee pollinators are currently recorded with many different sampling methods. However, the relative performances of these methods have not been systematically evaluated and compared. In response to the strong need to record ongoing shifts in pollinator diversity and abundance, global and regional pollinator initiatives must adopt standardized sampling protocols when developing large-scale and long-term monitoring schemes. We systematically evaluated the performance of six sampling methods (observation plots, pan traps, standardized and variable transect walks, trap nests with reed internodes or paper tubes) that are commonly used across a wide range of geographical regions in Europe and in two habitat types (agricultural and seminatural). We focused on bees since they represent the most important pollinator group worldwide. Several characteristics of the methods were considered in order to evaluate their performance in assessing bee diversity: sample coverage, observed species richness, species richness estimators, collector biases (identified by subunit-based rarefaction curves), species composition of the samples, and the indication of overall bee species richness (estimated from combined total samples). The most efficient method in all geographical regions, in both the agricultural and seminatural habitats, was the pan trap method. It had the highest sample coverage, collected the highest number of species, showed negligible collector bias, detected similar species as the transect methods, and was the best indicator of overall bee species richness. The transect methods were also relatively efficient, but they had a significant collector bias. The observation plots showed poor performance. As trap nests are restricted to cavity-nesting bee species, they had a naturally low sample coverage. However, both trap nest types detected additional species that were not recorded by any of the other methods. For large-scale and long-term monitoring schemes with surveyors with different experience levels, we recommend pan traps as the most efficient, unbiased, and cost-effective method for sampling bee diversity. Trap nests with reed internodes could be used as a complementary sampling method to maximize the numbers of collected species. Transect walks are the principal method for detailed studies focusing on plant-pollinator associations. Moreover, they can be used in monitoring schemes after training the surveyors to standardize their collection skills.
Resumo:
The decline of bees has raised concerns regarding their conservation and the maintenance of ecosystem services they provide to bee-pollinated wild flowers and crops. Although the Mediterranean region is a hotspot for bee species richness, their status remains poorly studied. There is an urgent need for cost-effective, reliable, and unbiased sampling methods that give good bee species richness estimates. This study aims: (a) to assess bee species richness in two common Mediterranean habitat types: semi-natural scrub (phrygana) and managed olive groves; (b) to compare species richness in those systems to that of other biogeographic regions, and (c) to assess whether six different sampling methods (pan traps, variable and standardized transect walks, observation plots and trap nests), previously tested in other European biogeographic regions, are suitable in Mediterranean communities. Eight study sites, four per habitat type, were selected on the island of Lesvos, Greece. The species richness observed was high compared to other habitat types worldwide for which comparable data exist. Pan traps collected the highest proportion of the total bee species richness across all methods at the scale of a study site. Variable and standardized transect walks detected the highest total richness over all eight study sites. Trap nests and observation plots detected only a limited fraction of the bee species richness. To assess the total bee species richness in bee diversity hotspots, such as the studied habitats, we suggest a combination of transect walks conducted by trained bee collectors and pan trap sampling
Resumo:
1. Bees are one of the most important groups of pollinators in the temperate zone. Although heavy metal pollution is recognised to be a problem affecting large parts of the European Union, we currently lack insights into the effects of heavy metals on wild bee survival and reproduction. 2. We investigated the impact of heavy metal pollution on the wild bee Osmia rufa (Hymenoptera: Megachilidae) by comparing their survival, reproduction and population dynamics along two independent gradients of heavy metal pollution, one in Poland and the other in the United Kingdom. We used trap nests to evaluate the response of fitness and survival parameters of O. rufa. To quantify the levels of pollution, we directly measured the heavy metal concentration in provisions collected by O. rufa. 3. We found that with increasing heavy metal concentration, there was a steady decrease in number of brood cells constructed by females and an increase in the proportion of dead offspring. In the most polluted site, there were typically 3–4 cells per female with 50–60% dead offspring, whereas in unpolluted sites there were 8 to 10 cells per female and only 10–30% dead offspring. Moreover, the bee population growth rate (R0) decreased along the heavy metal pollution gradients. In unpolluted sites, R0 was above 1, whereas in contaminated sites, the values tended to be below 1. 4. Our findings reveal a negative relationship between heavy metal pollution and several fitness parameters of the wild bee O. rufa, and highlight a mechanism whereby the detrimental effects of heavy metal pollution may severely impact wild bee communities.
Resumo:
This study was carried out at Faculdade de Medicina Veterinária e Zootecnia, Universidade Estadual Paulista, Botucatu, SP, Brazil, and evaluated bone quality in broiler breeders. Twenty-three families of Ross broiler breeders were housed in 5.0-m² pens. The families were comprised of 13 females and one male at the onset of the experimental period. The mean number of females per family was 9.34 at the end of the trial. The feeding program and management followed strain guidelines (Agroceres Ross, 2003). Bone analyses were performed in the right tibia and femur using optical radiographic densitometry at 4, 8, 12, 15, 20, 24, 30, 35, 42, 47 and 52 weeks of rearing. Trap nests were used to collect eggs from the breeders two weeks before and after the evaluation weeks. At each evaluation day, five birds were sacrificed after radiographs were taken and the tibias and femurs were collected to perform the following analyses: fatfree dry matter, ash percentage, bone resistance and Seedor index. Therefore, it was possible to establish correlations between bone quality and eggshell quality. Characteristics of bone quality were highly correlated to each other; on the other hand, there were no correlations between bone quality and external egg quality. In conclusion, there was no effect of egg production on egg quality, possibly because there was no reabsorption of bone minerals.
Resumo:
Renan B. Pitilin, Marcio S. Araujo, and Maria L.T. Buschini (2012) Individual specialization in the hunting-wasp Trypoxylon (Trypargilum) agamemnon Richards (Hymenoptera: Crabronidae). Zoological Studies 51(5): 655-662. Individuals of a population may differ with respect to resource use. This among-individual variation in resource utilization is called 'individual specialization' and may substantially impact the ecological and evolutionary dynamics of a population. The aim of this study was to evaluate whether females of 1 population of the hunting-wasp Trypoxylon agamemnon differed in their preferences for spider size and/or taxa. To observe the behavior of wasps, trap-nests were installed in an araucaria forest fragment in the Parque Municipal das Araucarias, Guarapuava (PR), southern Brazil. The indices within-individual component (WIC)/total niche width of a population (TNW) and average of values of the proportional similarity index (IS) were used to measure the degree of individual specialization. We found evidence of strong, significant individual specialization in T agamemnon in terms of both prey size (WIC/TNW = 0.43) and taxa (IS = 0.45). We hypothesized that individual specialization in this species resulted from cognitive tradeoffs that limit individuals to exploring a small subset of available resources. http://zoolstud.sinica.edu.tw/Journals/51.5/655.pdf
DYNAMICS OF COLONIZATION AND GYNE PRODUCTION BY MONOMORIUM-PHARAONIS (L) (HYM, FORMICIDAE) IN BRAZIL
Resumo:
The colonization characteristics of two neighboring populations of Monomorium pharaonis in human structures in Brazil were compared. No differences in the seasonality of colonizations into fixed trap nests between the two populations were found. However, one population had higher frequencies of colonizations with accompanying queens than the other. This resulted in the other population producing new queens at a higher frequency than the other. There was a clumping of colonization attempts at specific points, which shows that colonization may be predictable. These findings may be of importance in control programs for M. pharaonis in structures.
Resumo:
Using food bait stations and colony trap nests, the spatial relation between the foraging activity of established colonies of the polygynous and unicolonial exotic pharaoh's ant, Monomorium pharaonis, and colonization by colony fragments was studied over an 8 month period in a large institutional setting in Brazil. Both foraging activity and colonizations demonstrated significant spatial clumping. However, colonizations were significantly negatively clumped spatially with respect to foraging activity. This suggests that the colonization strategy of this species under the studied conditions was that of complete habitat domination.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Lia Goncalves, Claudia Ines da Silva, and Maria Luisa Tunes Buschini (2012) Collection of pollen grains by Centris (Hemisiella) tarsata Smith (Apidae: Centridini): Is C. tarsata an oligolectic or polylectic species? Zoological Studies 51(2): 195-203. Among pollinator species, bees play a prominent role in maintaining biodiversity because they are responsible, on average, for 80% of angiosperm pollination in tropical regions. The species richness of the bee genus Centris is high in South America. In Brazil, these bees occur in many types of ecosystems. Centris tarsata is an endemic species occurring only in Brazil. No previous studies considered interactions between plants and this bee species in southern Brazil, where it is the most abundant trap-nesting bee. Accordingly, the goals of this study were to investigate plants used by this species for its larval food supply and determine if this bee is polylectic or oligolectic in this region. This work was conducted in the Parque Municipal das Araucarias, Guarapuava (PR), southern Brazil, from Mar. 2002 to Dec. 2003. Samples of pollen were collected from nests of these bees and from flowering plants in grassland and swamp areas where the nests were built. All of the samples were treated with acetolysis to obtain permanent slides. The family Solanaceae was visited most often (71%). Solanum americanum Mill. (28.6%) and Sol. variabile Mart. (42.4%) were the primary pollen sources for C. tarsata in the study area. We found that although C. tarsata visited 20 species of plants, it preferred Solanum species with poricidal anthers and pollen grains with high protein levels. This selective behavior by females of C. tarsata indicates that these bees are oligolectic in their larval provisioning in this region of southern Brazil. http://zoolstud.sinica.edu.tw/Journals/51.2/195.pdf
Resumo:
Entering behavior of Gasteruption brachychaetum Schrottky (Hymenoptera, Gasteruptiidae) into a nest of Hylaeus Fabricius (Hymenoptera, Colletidae). Nests of Hylaeus aff. guaraniticus (Schrottky, 1906) were parasited by females of Gasteruption brachychaetum Schrottky, 1906 in trap nests in Sao Paulo(Brazil). This is the first host record of a Gasteruptiidae in the Neotropical Region. The behavior of a G. brachychaetum female entering a host's nest is described as follows: an inquiline female hovered near the host's nest, landed and detected that a female of H. aff. guaraniticus was inside the nest, waited for the host female to fly out, entered backwards into the nest, remained there for almost six minutes, and then went out the nest. The development time of immature stages of G. brachychaetum varied between 16 and 299 days.
Resumo:
Habitat fragmentation strongly affects species distribution and abundance. However, mechanisms underlying fragmentation effects often remain unresolved. Potential mechanisms are (1) reduced dispersal of a species or (2) altered species interactions in fragmented landscapes. We studied if abundance of the spider-hunting and cavity-nesting wasp Trypoxylon figulus Linnaeus (Hymenoptera: Crabronidae) is affected by fragmentation, and then tested for any effect of larval food (bottom up regulation) and parasitism (top down regulation). Trap nests of T. figulus were studied in 30 agricultural landscapes of the Swiss Plateau. The sites varied in the level of isolation from forest (adjacent, in the open landscape but connected, isolated) and in the amount of woody habitat (from 4 % to 74 %). We recorded wasp abundance (number of occupied reed tubes), determined parasitism of brood cells and analysed the diversity and abundance of spiders that were deposited as larval food. Abundances of T. figulus were negatively related to forest cover in the landscape. In addition, T. figulus abundances were highest at forest edges, reduced by 33.1% in connected sites and by 79.4% in isolated sites. The mean number of spiders per brood cell was lowest in isolated sites. Nevertheless, structural equation modelling revealed that this did not directly determine wasp abundance. Parasitism was neither related to the amount of woody habitat nor to isolation and did not change with host density. Therefore, our study showed that the abundance of T. figulus cannot be fully explained by the studied trophic interactions. Further factors, such as dispersal and habitat preference, seem to play a role in the population dynamics of this widespread secondary carnivore in agricultural landscapes.
Resumo:
A diapausa é um fenômeno amplamente presente nos artrópodes e é considerada como primordial para o sucesso evolutivo da Classe Insecta, pois possibilita a sobrevivência em condições adversas, como estações frias e secas. Sabe-se que durante a diapausa ocorre o silenciamento de muitos genes e que outros são unicamente expressos nesta fase. Embora existam evidências de que o processo da diapausa tenha se mantido conservado durante a evolução das espécies, ainda há lacunas no conhecimento sobre o nível de conservação dos padrões metabólicos. Um bom modelo para se estudar a diapausa é Tetrapedia diversipes, uma espécie bivoltina de abelha solitária. Os indivíduos que nascem na primeira geração seguem o desenvolvimento desde ovo até adulto em tempo bem menor do que aqueles que nascem na segunda geração; estes retardam o desenvolvimento na fase larval. Além disso, essa espécie é de fácil obtenção no seu ambiente natural, pois apresenta alta taxa de nidificação em ninhos-armadilha. O objetivo deste trabalho foi comparar o perfil de expressão de genes entre as larvas da 1ª geração (que não entram em diapausa), larvas da 2ª geração (que entrariam em diapausa) e das larvas em diapausa. Foram identificados 196 genes diferencialmente expressos, destes 87 foram anotados. Muitos destes genes já foram descritos na literatura como relacionados à diapausa em outras espécies, no entanto, o padrão de expressão não é conservado. Os genes aqui identificados foram divididos em cinco grupos: relacionados à desintoxicação celular, cutícula e citoesqueleto, metabolismo de lipídeos e esteróis, ciclo celular e outros genes relacionados à diapausa
Resumo:
Field studies show that the internal screens in a gross pollutant trap (GPT) are often clogged with organic matter, due to infrequent cleaning. The hydrodynamic performance of a GPT with fully blocked screens was comprehensively investigated under a typical range of onsite operating conditions. Using an acoustic Doppler velocimeter (ADV), velocity profiles across three critical sections of the GPT were measured and integrated to examine the net fluid flow at each section. The data revealed that when the screens are fully blocked, the flow structure within the GPT radically changes. Consequently, the capture/retention performance of the device rapidly deteriorates. Good agreement was achieved between the experimental and the previous 2D computational fluid dynamics (CFD) velocity profiles for the lower GPT inlet flow conditions.
Resumo:
A technique was developed to investigate the capture/retention characteristic of a gross pollutant trap (GPT) with fully and partially blocked internal screens. Custom modified spheres of variable density filled with liquid were released into the GPT inlet and monitored at the outlet. The outlet data shows that the capture/retention performances of a GPT with fully blocked screens deteriorate rapidly. During higher flow rates, screen blockages below 68% approach maximum efficiency. At lower flow rates, the high performance trend is reversed and the variation in behaviour of pollutants with different densities becomes more noticeable. Additional experiments with a second upstream inlet configured GPT showed an improved capture/retention performance. It was also noted that the bypass allows the incoming pollutants to escape when the GPT is blocked. This useful feature prevents upstream blockages between cleaning intervals.
Resumo:
This research shows that gross pollutant traps (GPTs) continue to play an important role in preventing visible street waste—gross pollutants—from contaminating the environment. The demand for these GPTs calls for stringent quality control and this research provides a foundation to rigorously examine the devices. A novel and comprehensive testing approach to examine a dry sump GPT was developed. The GPT is designed with internal screens to capture gross pollutants—organic matter and anthropogenic litter. This device has not been previously investigated. Apart from the review of GPTs and gross pollutant data, the testing approach includes four additional aspects to this research, which are: field work and an historical overview of street waste/stormwater pollution, calibration of equipment, hydrodynamic studies and gross pollutant capture/retention investigations. This work is the first comprehensive investigation of its kind and provides valuable practical information for the current research and any future work pertaining to the operations of GPTs and management of street waste in the urban environment. Gross pollutant traps—including patented and registered designs developed by industry—have specific internal configurations and hydrodynamic separation characteristics which demand individual testing and performance assessments. Stormwater devices are usually evaluated by environmental protection agencies (EPAs), professional bodies and water research centres. In the USA, the American Society of Civil Engineers (ASCE) and the Environmental Water Resource Institute (EWRI) are examples of professional and research organisations actively involved in these evaluation/verification programs. These programs largely rely on field evaluations alone that are limited in scope, mainly for cost and logistical reasons. In Australia, evaluation/verification programs of new devices in the stormwater industry are not well established. The current limitations in the evaluation methodologies of GPTs have been addressed in this research by establishing a new testing approach. This approach uses a combination of physical and theoretical models to examine in detail the hydrodynamic and capture/retention characteristics of the GPT. The physical model consisted of a 50% scale model GPT rig with screen blockages varying from 0 to 100%. This rig was placed in a 20 m flume and various inlet and outflow operating conditions were modelled on observations made during the field monitoring of GPTs. Due to infrequent cleaning, the retaining screens inside the GPTs were often observed to be blocked with organic matter. Blocked screens can radically change the hydrodynamic and gross pollutant capture/retention characteristics of a GPT as shown from this research. This research involved the use of equipment, such as acoustic Doppler velocimeters (ADVs) and dye concentration (Komori) probes, which were deployed for the first time in a dry sump GPT. Hence, it was necessary to rigorously evaluate the capability and performance of these devices, particularly in the case of the custom made Komori probes, about which little was known. The evaluation revealed that the Komori probes have a frequency response of up to 100 Hz —which is dependent upon fluid velocities—and this was adequate to measure the relevant fluctuations of dye introduced into the GPT flow domain. The outcome of this evaluation resulted in establishing methodologies for the hydrodynamic measurements and gross pollutant capture/retention experiments. The hydrodynamic measurements consisted of point-based acoustic Doppler velocimeter (ADV) measurements, flow field particle image velocimetry (PIV) capture, head loss experiments and computational fluid dynamics (CFD) simulation. The gross pollutant capture/retention experiments included the use of anthropogenic litter components, tracer dye and custom modified artificial gross pollutants. Anthropogenic litter was limited to tin cans, bottle caps and plastic bags, while the artificial pollutants consisted of 40 mm spheres with a range of four buoyancies. The hydrodynamic results led to the definition of global and local flow features. The gross pollutant capture/retention results showed that when the internal retaining screens are fully blocked, the capture/retention performance of the GPT rapidly deteriorates. The overall results showed that the GPT will operate efficiently until at least 70% of the screens are blocked, particularly at high flow rates. This important finding indicates that cleaning operations could be more effectively planned when the GPT capture/retention performance deteriorates. At lower flow rates, the capture/retention performance trends were reversed. There is little difference in the poor capture/retention performance between a fully blocked GPT and a partially filled or empty GPT with 100% screen blockages. The results also revealed that the GPT is designed with an efficient high flow bypass system to avoid upstream blockages. The capture/retention performance of the GPT at medium to high inlet flow rates is close to maximum efficiency (100%). With regard to the design appraisal of the GPT, a raised inlet offers a better capture/retention performance, particularly at lower flow rates. Further design appraisals of the GPT are recommended.