Influência do tratamento térmico de alívio de tensões assoaciado à elevada energia de soldagem na tenacidade da zona termicamente afetada de um aço TMCP microligado aplicado em estruturas off-shore

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The effects of welding heat input on the usability of high strength steels in welded structures

High strength steel (HSS) has been in use in workshops since the 1980s. At that time, the significance of the term HSS differed from the modern conception as the maximum yield strength of HSSs has increased nearly every year. There are three different ways to make HSS. The first and oldest method is QT (quenched and tempered) followed by the TMCP (thermomechanical controlled process) and DQ (direct quenching) methods. This thesis consists of two parts, the first of which part introduces the research topic and discusses welded HSS structures by characterizing the most important variables. In the second part of the thesis, the usability of welded HSS structures is examined through a set of laboratory tests. The results of this study explain the differences in the usability of the welded HSSs made by the three different methods. The results additionally indicate that usage of different HSSs in the welded structures presumes that manufacturers know what kind of HSS they are welding. As manufacturers use greater strength HSSs in welded structures, the demands for welding rise as well. Therefore, during the manufacturing process, factors such as heat input, cooling time, weld quality, and more must be under careful observation.

Tandem-MAG-welding of high strength steels for shipbuilding applications

Tämän työn tavoitteena oli hitsata tandem MAG –laitteistolla 25 mm paksua Ruukin E500 TMCP terästä. Työssä oli tarkoituksena vähentää railotilavuutta mahdollisimman paljon sekä suorittaa testihitsaukset 0.8 kJ/mm sekä 2.5 kJ/mm lämmöntuonneilla. Teoriaosuudessa käsiteltiin Tandem MAG-hitsaukseen, sen tuottavuuteen ja laatukysymyksiin liittyviä asioita sekä siinä perehdyttiin suurlujuusteräksien käyttöön hitsauksessa sekä laivanrakennuksessa. Kokeellisessa osuudessa perehdyttiin hitsauksessa huomattuihin etuihin, ongelmiin sekä ongelmien ratkaisumahdollisuuksiin. Hitsausliitoksen mekaaniset ominaisuudet tutkittiin rikkomattomin sekä rikkovin menetelmin. Alustavat hitsausohjeet luotiin kummallekin lämmöntuonnille. Testaukset aloitettiin 30 º railokulmalla pienentäen kulmaa mahdollisuuksien mukaan. Testauksissa ei saatu hitsattua onnistuneesti alle 30 º railokulmalla. Hitsaustestien aikana huomattiin magneettisen puhalluksen vaikutus hitsaustapahtumaan. Kaasunvirtausnopeuden tuli olla tietyn suuruinen jotta palkokerrokset onnistuivat ilman huokoisuusongelmaa. Pienemmällä lämmöntuonnilla hitsattaessa kaasunvirtausnopeudet olivat tärkeämpiä hitsatessa ylempiä palkokerroksia. Kääntämällä hitsauspoltinta sivuttaissuunnassa 7-10 astetta auttoi ehkäisemään reunahaavan syntymistä. Rikkovista menetelmistä testitulokset olivat hyväksyttyjä kaikkien muiden paitsi päittäishitsin sivutaivutuskokeen osalta.

Narrow Gap flux-cored arc welding of high strength shipbuilding steels

This thesis is part of the Arctic Materials Technologies Development –project. The research of the thesis was done in cooperation with Arctech Helsinki Shipyard, Lappeenranta University of Technology and Kemppi Oy. Focus of the thesis was to study narrow gap flux-cored arc welding of two high strength steels with three different groove angles of 20°, 10° and 5°. Welding of the 25 mm thick E500 TMCP and 10 mm thick EH36 steels was mechanized and Kemppi WisePenetration and WiseFusion processes were tested with E500 TMCP steel. EH36 steel test pieces were welded without Wise processes. Shielding gases chosen were carbon dioxide and a mixture of argon and carbon dioxide. Welds were tested with non-destructive and destructive testing methods. Radiographic, visual, magnetic particle and liquid penetrant testing proved that welds were free from imperfections. After non-destructive testing, welds were tested with various destructive testing methods. Impact strength, bending, tensile strength and hardess tests proved that mechanized welding and Wise processes produced quality welds with narrower gap. More inconsistent results were achieved with test pieces welded without Wise processes. Impact test results of E500 TMCP exceeded the 50 J limit on weld, set by Russian Maritime Register of Shipping. EH36 impact test results were much closer to the limiting values of 34 J on weld and 47 on HAZ. Hardness values of all test specimens were below the limiting values. Bend testing and tensile testing results fulfilled the the Register requirements. No cracking or failing occurred on bend test specimens and tensile test results exceeded the Register limits of 610 MPa for E500 TMCP and 490 MPa for EH36.

Development of HIF-1α/HIF-1β heterodimerization inhibitors using a novel bioluminescence reporter assay system for in vitro high throughput screening and in vivo imaging

Tumor growth often outpaces its vascularization, leading to development of a hypoxic tumor microenvironment. In response, an intracellular hypoxia survival pathway is initiated by heterodimerization of hypoxia-inducible factor (HIF)-1α and HIF-1β, which subsequently upregulates the expression of several hypoxia-inducible genes, promotes cell survival and stimulates angiogenesis in the oxygen-deprived environment. Hypoxic tumor regions are often associated with resistance to various classes of radio- or chemotherapeutic agents. Therefore, development of HIF-1α/β heterodimerization inhibitors may provide a novel approach to anti-cancer therapy. To this end, a novel approach for imaging HIF-1α/β heterodimerization in vitro and in vivo was developed in this study. Using this screening platform, we identified a promising lead candidate and further chemically derivatized the lead candidate to assess the structure-activity relationship (SAR). The most effective first generation drug inhibitors were selected and their pharmacodynamics and anti-tumor efficacy in vivo were verified by bioluminescence imaging (BLI) of HIF-1α/β heterodimerization in the xenograft tumor model. Furthermore, the first generation drug inhibitors, M-TMCP and D-TMCP, demonstrated efficacy as monotherapies, resulting in tumor growth inhibition via disruption of HIF-1 signaling-mediated tumor stromal neoangiogenesis.

Association between physical activity and cardiorespiratory factors in adolescents: a cross-sectional exploratory study

Background: Currently, under half of the adolescents reach recommended daily levels of physical activity (PA). It is known that higher levels of PA lead to higher levels of cardiorespiratory fitness (CRF) and therefore, a health-related CRF criterion value could contribute to identify the target population for primary cardiovascular disease prevention. Therefore, the aim of this study was to explore the relation between PA levels and CRF factors in healthy adolescents. Methods: A cross-sectional exploratory study with healthy adolescents aged 12-18 years old was conducted. Socio-demographic and body composition data were collected using a questionnaire. PA level was scored with the Physical Activity Index (PAI) and CRF assessment included lung function (LF) measured with spirometry and exercise tolerance measured with Incremental Shuttle Walking Test (ISWT). According to PAI scores the sample was divided in two groups: 1 (sedentary, low and moderately active); 2 (vigorously active (VA)). Descriptive statistics were applied to characterise the sample. Independent sample t-tests assessed differences between groups and simple logistic regressions identified the predictors of being VA. Results: The study included 115 adolescents (14.63±1.70 years old; 56.52% female). Adolescents presented a normal body mass index=21.19±3.14 Kg.m-2) and LF (forced expiratory volume in the first second (FEV1)=105.58±12.73% of the predicted). Significant differences were found between groups in height (G1–163.44±8.01; G2–167±8.65; p=0.024), LF (FEV1/ forced vital capacity (FVC); G1–97.58±10.66; G2–94.04±8.04; p=0.049), ISWT distance (G1– 1089.81±214.04; G2–1173.60±191.86; p=0.038); heart rate (HR) at rest (G1– 84.61±13.68; G2–79.23±13.81; p=0.038), HR at the end of the best ISWT (G1– 124.71±37.57; G2–133.54±33.61; p=0.041) and percentage of the maximal HR achieved during ISWT (G1–63.09±19.03; G2–67.53±17.08; p=0.043). Simple logistic regressions showed that height (OR–1.054; 95%CI 1.006-1.104), ISWT distance (OR–1.002; 95%CI 1.000-1.004) and HR at rest (OR–0.971; 95%CI 0.945-0.999) were predictors of being VA. Conclusions: Results suggest that more physically active adolescents have a better CRF profile. The findings suggest that PA is important to adolescents’ health status and it should be encouraged since childhood. Clinical practice will benefit from the use of PAI, ISWT and HR findings, allowing physiotherapists to use it for prescribing exercise.