Avaliação em escala real da formação de THMs em águas de abastecimento

Pós-graduação em Engenharia Civil - FEIS

Avaliação de compostos halogenados em água e ar de piscinas

A procura de piscinas para a prática de atividades desportivas, recreativas e/ou terapêuticas tem sofrido um aumento gradual ao longo do tempo. No entanto, nas piscinas existem vários perigos associados à sua utilização. Relativamente aos perigos químicos, a utilização de desinfetantes à base de cloro, bromo ou compostos derivados vai, por um lado, inativar microrganismos patogénicos mas, por outro, dar origem a subprodutos ao reagir com compostos orgânicos presentes na água. Os trihalometanos são um exemplo de subprodutos que se podem formar e, entre os compostos principais, estão o clorofórmio (TCM), bromodiclorometano (BDCM), clorodibromometano (CDBM) e bromofórmio (TBM). Este trabalho teve como objetivo o desenvolvimento de uma metodologia analítica para a determinação de trihalometanos em água e ar de piscinas e a sua aplicação a um conjunto de amostras. Para a análise dos compostos, foi utilizada a microextração em fase sólida no espaço de cabeça (HS-SPME) com posterior quantificação dos compostos por cromatografia gasosa com detetor de captura eletrónica (GC-ECD). Foi realizada uma otimização das condições de extração dos compostos em estudo em amostras de água, através da realização de dois planeamentos experimentais. As condições ótimas são assim obtidas para uma temperatura de extração de 45ºC, um tempo de extração de 25 min e um tempo de dessorção de 5 min. Foram analisadas amostras de águas de piscina cedidas pelo Centro de Estudos de Águas, sendo avaliada a aplicação da técnica HS-SPME e o efeito de matriz. O modo como se manuseiam as soluções que contêm os compostos em estudo influencia os resultados devido ao facto destes serem bastante voláteis. Concluiu-se também que existe efeito de matriz, logo a concentração das amostras deverá ser determinada através do método de adição de padrão. A caraterização da água de piscinas interiores permitiu conhecer a concentração de trihalometanos (THMs). Foram obtidas concentrações de TCM entre 4,5 e 406,5 μg/L sendo que apenas 4 das 27 amostras analisadas ultrapassam o valor limite imposto pelo Decreto-Lei nº306/2007 (100 μg/L) no que diz respeito a águas de consumo humano e que é normalmente utilizado como valor indicativo para a qualidade das águas de piscina. Relativamente à concentração obtida no ar de uma piscina interior, foi detetada uma concentração média de 224 μg/m3 de TCM, valor muito abaixo dos 10000 μg/m3 impostos pelo Decreto-lei nº24/2012, como valor limite para exposição profissional a agentes químicos.

Optimization of HS-SPME analytical conditions using factorial design for trihalomethanes determination in swimming pool water samples

Trihalomethanes (THMs) are widely referred and studied as disinfection by-products (DBPs). The THMs that are most commonly detected are chloroform (TCM), bromodichloromethane (BDCM), chlorodibromomethane (CDBM), and bromoform (TBM). Several studies regarding the determination of THMs in swimming pool water and air samples have been published. This paper reviews the most recent work in this field, with a special focus on water and air sampling, sample preparation and analytical determination methods. An experimental study has been developed in order to optimize the headspace solid-phasemicroextraction (HS-SPME) conditions of TCM, BDCM, CDBM and TBM from water samples using a 23 factorial design. An extraction temperature of 45 °C, for 25min, and a desorption time of 5 min were found to be the best conditions. Analysis was performed by gas chromatography with an electron capture detector (GC-ECD). The method was successfully applied to a set of 27 swimming pool water samples collected in the Oporto area (Portugal). TCM was the only THM detected with levels between 4.5 and 406.5 μg L−1. Four of the samples exceeded the guideline value for total THMs in swimming pool water (100 μgL−1) indicated by the Portuguese Health Authority.

Exposure to Trihalomethanes through Different Water Uses and Birth Weight, Small for Gestational Age, and Preterm Delivery in Spain

BACKGROUND Evidence associating exposure to water disinfection by-products with reduced birth weight and altered duration of gestation remains inconclusive. OBJECTIVE We assessed exposure to trihalomethanes (THMs) during pregnancy through different water uses and evaluated the association with birth weight, small for gestational age (SGA), low birth weight (LBW), and preterm delivery. METHODS Mother-child cohorts set up in five Spanish areas during the years 2000-2008 contributed data on water ingestion, showering, bathing, and swimming in pools. We ascertained residential THM levels during pregnancy periods through ad hoc sampling campaigns (828 measurements) and regulatory data (264 measurements), which were modeled and combined with personal water use and uptake factors to estimate personal uptake. We defined outcomes following standard definitions and included 2,158 newborns in the analysis. RESULTS Median residential THM ranged from 5.9 μg/L (Valencia) to 114.7 μg/L (Sabadell), and speciation differed across areas. We estimated that 89% of residential chloroform and 96% of brominated THM uptakes were from showering/bathing. The estimated change of birth weight for a 10% increase in residential uptake was -0.45 g (95% confidence interval: -1.36, 0.45 g) for chloroform and 0.16 g (-1.38, 1.70 g) for brominated THMs. Overall, THMs were not associated with SGA, LBW, or preterm delivery. CONCLUSIONS Despite the high THM levels in some areas and the extensive exposure assessment, results suggest that residential THM exposure during pregnancy driven by inhalation and dermal contact routes is not associated with birth weight, SGA, LBW, or preterm delivery in Spain.

Development of a simple analytical method for determining trihalomethanes in beer using a headspace solid-phase microextraction technique

We developed a simple, rapid, and solventless method for analyzing trihalomethanes in beer samples using headspace solid-phase microextraction. The effects of varying experimental parameters, such as extraction temperature and time, addition of sodium chloride, and agitation speed, on extraction yield were studied using a univariate experimental design. Limits of detection between 0.22 and 0.46 µg L- 1 and wide linear ranges were achieved for trihalomethanes. We measured the trihalomethane recoveries and precision (as the standard deviation of repeat measurements) and demonstrated the applicability of the proposed method by analyzing 32 beer samples.

Approche multidisciplinaire pour l’amélioration de l’estimation de l’exposition aux sous-produits de désinfection de l’eau en milieu domestique et en piscine

La désinfection de l’eau de consommation et des piscines induit la formation de sous-produits (SPD) potentiellement nocifs pour la santé, parmi lesquels les trihalométhanes (THM), les acides haloacétiques (HAA) et les chloramines (CAM). La difficulté d’estimer l’exposition humaine à ces SPD empêche de cerner précisément les risques sanitaires possiblement associés (i.e., cancérigènes, reprotoxiques, irritatifs). Nos travaux s’articulent autour d’une méthodologie consistant à intégrer des données d’occurrence environnementales à des modèles toxicocinétiques à base physiologique (TCBP) pour améliorer les mesures de l’exposition aux SPD. Cette approche multidisciplinaire veut prendre en compte de manière aussi appropriée que possible les deux composantes majeures des variations de cette exposition : les variations spatio-temporelles des niveaux de contamination environnementale et l’impact des différences inter- et intra-individuelles sur les niveaux biologiques. Cette thèse, organisée en deux volets qui explorent chacun successivement des aspects environnemental et biologique de la problématique, vise à contribuer au développement de cette stratégie innovante d’estimation de l’exposition et, plus généralement, à des meilleures pratiques en la matière. Le premier volet de la thèse s’intéresse à l’exposition en milieu domestique (i.e., résultant de l’utilisation de l’eau potable au domicile) et est consacré au cas complexe des THM, les plus abondants et volatils des SPD, absorbables par ingestion mais aussi par inhalation et voie percutanée. Les articles I et II, constitutifs de ce volet, documentent spécifiquement la question des variations inter- et intra- journalières de présence des SPD en réseau et de leurs impacts sur les estimateurs de l’exposition biologique. Ils décrivent l’amplitude et la diversité des variations à court terme des niveaux environnementaux, présentent les difficultés à proposer une façon systématique et « épidémiologiquement » pratique de les modéliser et proposent, de manière originale, une évaluation des mésestimations, somme toute modestes, des mesures biologiques de l’exposition résultant de leurs non-prise en compte. Le deuxième volet de la thèse se penche sur l’exposition aux SPD en piscine, d’un intérêt grandissant au niveau international, et se restreint au cas jugé prioritaire des piscines publiques intérieures. Ce volet envisage, pour quantifier l’exposition dans ce contexte particulier, l’extension de l’approche méthodologique préconisée, élaborée originellement pour application dans un contexte domestique : d’abord, à travers une analyse approfondie des variations des niveaux de contamination (eau, air) des SPD en piscine en vue de les modéliser (article III); puis en examinant, dans le cas particulier du chloroforme, le THM le plus abondant, la possibilité d’utiliser la modélisation TCBP pour simuler des expositions en piscine (article IV). Les résultats mettent notamment en évidence la difficulté d’appréhender précisément la contamination environnementale autrement que par un échantillonnage in situ tandis que la modélisation TCBP apparait, sur le plan toxicologique, comme l’outil le plus pertinent à ce jour, notamment au regard des autres approches existantes, mais qu’il convient d’améliorer pour mieux prédire les niveaux d’exposition biologique. Finalement, ces travaux illustrent la pertinence et la nécessité d’une approche multidisciplinaire et intégratrice et suggère, sur cette base, les pistes à explorer en priorité pour mieux évaluer l’exposition aux SPD et, in fine, cerner véritablement les risques sanitaires qui en résultent.

A comparison of the role of two blue-green algae in THM and HAA formation

The contribution of two blue-green algae species, Anabaeria flos-aquae and Microcystis aeruginosa, to the formation of trihalomethanes (THMs) and haloacetic acids (HAAs) was investigated. The experiments examined the formation potential of these disinfection by-products (DBPs) from both algae cells and extracellular organic matter (EOM) during four algal growth phases. Algal cells and EOM of Anabaena and Microcystis exhibited a high potential for DBP formation. Yields of total THMs (TTHM) and total HAAs (THAA) were closely related to the growth phase. Reactivity of EOM from Anabaena was slightly higher than corresponding cells, while the opposite result was found for Microcystis. Specific DBP yields (yield/unit C) of Anabaena were in the range of 2-11 mu mol/mmol C for TTHM and 217 mu mol/mmol C for THAA, while those of Microcystis were slightly higher. With regard to the distributions of individual THM and HAA compounds, differences were observed between the algae species and also between cells and EOM. The presence of bromide shifted the dominant compounds from HAAs to THMs. (C) 2009 Elsevier Ltd. All rights reserved.

ATD: a multiplatform for semiautomatic 3-D detection of kidneys and their pathology in real time

This research presents a novel multi-functional system for medical Imaging-enabled Assistive Diagnosis (IAD). Although the IAD demonstrator has focused on abdominal images and supports the clinical diagnosis of kidneys using CT/MRI imaging, it can be adapted to work on image delineation, annotation and 3D real-size volumetric modelling of other organ structures such as the brain, spine, etc. The IAD provides advanced real-time 3D visualisation and measurements with fully automated functionalities as developed in two stages. In the first stage, via the clinically driven user interface, specialist clinicians use CT/MRI imaging datasets to accurately delineate and annotate the kidneys and their possible abnormalities, thus creating “3D Golden Standard Models”. Based on these models, in the second stage, clinical support staff i.e. medical technicians interactively define model-based rules and parameters for the integrated “Automatic Recognition Framework” to achieve results which are closest to that of the clinicians. These specific rules and parameters are stored in “Templates” and can later be used by any clinician to automatically identify organ structures i.e. kidneys and their possible abnormalities. The system also supports the transmission of these “Templates” to another expert for a second opinion. A 3D model of the body, the organs and their possible pathology with real metrics is also integrated. The automatic functionality was tested on eleven MRI datasets (comprising of 286 images) and the 3D models were validated by comparing them with the metrics from the corresponding “3D Golden Standard Models”. The system provides metrics for the evaluation of the results, in terms of Accuracy, Precision, Sensitivity, Specificity and Dice Similarity Coefficient (DSC) so as to enable benchmarking of its performance. The first IAD prototype has produced promising results as its performance accuracy based on the most widely deployed evaluation metric, DSC, yields 97% for the recognition of kidneys and 96% for their abnormalities; whilst across all the above evaluation metrics its performance ranges between 96% and 100%. Further development of the IAD system is in progress to extend and evaluate its clinical diagnostic support capability through development and integration of additional algorithms to offer fully computer-aided identification of other organs and their abnormalities based on CT/MRI/Ultra-sound Imaging.

Risk assessment of trihalomethanes from tap water in Fortaleza, Brazil

The cancer risks (CR) by oral ingestion, dermal absorption, and inhalation exposure of trihalomethanes (THM) from tap water of ten districts in Fortaleza, Brazil were estimated. The mean levels of THM compounds were obtained in Fortaleza tap water as follow: 63.9 mu g L(-1) for chloroform (CHCl(3)), 40.0 mu g L(-1) for bromodichloromethane (CHBrCl(2)), and 15.6 mu g L(-1) for dibromochloromethane (CHBr(2)Cl). Bromoform (CHBr(3)) was not detected. The mean CR for THMs in tap water is 3.96 x 10(-4). The results indicate that Fortaleza residents have a higher CR by inhalation than dermal absorption and oral ingestion. The CR for CHCl(3) contributes with 68% as compared with the total CR, followed by CHBrCl(2) (21%), and CHBr(2)Cl (11%). The hazard index (HI) is about ten times lower than unity, not indicating non-cancer effects.

Ocorrência de trihalometanos e ácidos haloacéticos na desinfecção de efluentes tratados biologicamente

Desinfecção é um processo empregado no tratamento de água potável e de efluente líquido. Cloro e seus derivados (desinfetantes mais utilizados) apresentam o inconveniente de formar produtos perigosos à saúde, resultantes de reações com compostos orgânicos. Os compostos Trihalometanos (THMs) e os ácidos haloacéticos (HAAs) estão entre os principais grupos de subprodutos encontrados. Vários fatores interferem na formação de tais produtos, como por exemplo: pH, temperatura, tempo reacional, nitrogênio amoniacal etc. O presente trabalho apresenta um estudo da geração de subprodutos provindos da desinfecção de quatro distintos efluentes de estações de tratamento biológico. Hipoclorito de sódio e ferrato(VI) de sódio foram usados como desinfetantes em concentrações e tempos reacionais variados. Análises de pH, demanda química de oxigênio, nitrogênio amoniacal, cloro combinado, THMs e HAAs foram realizadas. A concentração dos subprodutos foi proporcional à concentração e ao tempo reacional do desinfetante hipoclorito de sódio. Para a mais alta concentração empregada de hipoclorito (20 mg L-1) e maior tempo reacional (168 h), o total de THMs não excedeu ao valor máximo de descarga permitido para efluentes tratados (1 mg L-1 de clorofórmio). Os THMs e os HAAs apresentaram-se inversamente correlacionados com a concentração de nitrogênio amoniacal presente no efluente. Para o desinfectante ferrato(VI) não houve formação de subprodutos halogenados, uma vez que este desinfetante não contribui com átomos de cloro.

Presença de trihalometanos e qualidade sanitária da água nas estações de tratamento e reservatórios domiciliares nos municípios de Araraquara e Bariri/SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Health significance of chlorination byproducts in drinking water: The Houston experience: A continuation study

Background. Houston, Texas, once obtained all its drinking water from underground sources. However, in 1853, the city began supplementing its water from the surface source Lake Houston. This created differences in the exposure to disinfection byproducts (DBPs) in different parts of Houston. Trihalomethanes (THMs) are the most common DBP and are useful indicators of DBPs in treated drinking water. This study examines the relationship between THMs in chlorinated drinking water and the incidence of bladder cancer in Houston. ^ Methods. Individual bladder cancer deaths, from 1975 to 2004, were assigned to four surface water exposure areas in Houston utilizing census tracts—area A used groundwater the longest, area B used treated lake water the longest, area C used treated lake water the second longest, and area D used a combination of groundwater and treated lake water. Within each surface water exposure area mortality rates were calculated in 5 year intervals by four race-gender categories. Linear regression models were fitted to the bladder cancer mortality rates over the entire period of available data (1990–2004). ^ Results. A decrease in bladder cancer mortality was observed amongst white males in area B (p = 0.030), white females in area A (p = 0.008), non-white males in area D (p = 0.003), and non-white females in areas A and B (p = 0.002 & 0.001). Bladder cancer mortality differed by race-gender and time (p ≤ 0.001 & p ≤ 0.001), but not by surface water exposure area (p = 0.876). ^ Conclusion. The relationship between bladder cancer mortality and the four surface water exposure areas (signifying THM exposure) was insignificant. This result could be attributable to Houston controlling for THMs starting in the early 1980’s by using chloramine as a secondary disinfectant in the drinking water purification process.^