TBX3-Mutationsanalysen und Konstruktion einer Zelllinie für TBX2-Inhibitorscreenings

Die nahe verwandten T-box Transkriptionsfaktoren TBX2 und TBX3 werden in zahlreichen humanen Krebsarten überexprimiert, insbesondere in Brustkrebs und Melanomen. Die Überexpression von TBX2 und TBX3 hat verschiedene zelluläre Effekte, darunter die Unterdrückung der Seneszenz, die Förderung der Epithelialen-Mesenchymalen Transition sowie invasive Zellmotilität. Im Gegensatz dazu führt ein Funktionsverlust von TBX3 und der meisten anderen humanen T-box-Gene zu haploinsuffizienten Entwicklungsdefekten. Durch Sequenzierung des Exoms von Brustkrebsproben identifizierten Stephens et al. fünf verschiedene Mutationen in TBX3, welche allesamt die DNA-bindende T-box-Domäne betrafen. Die In-Frame-Deletion N212delN wurde zweimal gefunden. Aus der Anhäufung der Mutationen innerhalb der T-box-Domäne wurde geschlossen, dass TBX3 bei Brustkrebs ein Treibergen ist. Da Mutationen innerhalb der T-box-Domäne im Allgemeinen zu einem Funktionsverlust führen, aber die onkogene Aktivität von TBX3 meist auf eine Überexpression zurückzuführen ist, wurden die potentiellen Treibermutationen hinsichtlich einer verminderten oder gesteigerten TBX3-Funktion geprüft. Getestet wurden zwei In-Frame Deletionen, eine Missense- sowie eine Frameshift-Mutante bezüglich der DNA-Bindung in vitro und der Zielgen-Repression in Zellkultur. Zusätzlich wurde eine in silico Analyse der im The Cancer Genome Atlas (TCGA) gelisteten somatischen TBX-Brustkrebsmutationen durchgeführt. Sowohl die experimentelle als auch die in silico Analyse zeigten, dass die untersuchten Mutationen vorwiegend zum Verlust der TBX3-Funktion führen. Um den Mechanismus der Genrepression durch TBX3 besser zu verstehen, wurden weitere TBX3-Mutanten bezüglich ihrer Wirkung auf die p21-Promotoraktivität (p21-Luc-Reporter und endogene p21-Expression) analysiert. Wildtypische p21-Luc-Repression zeigten die zwei Mutationen S674A (Phosphorylierung) und D275K (SUMOylierung), welche posttranslationale Modifikationen verhindern, sowie die Interaktion mit dem Tumorsuppressor Rb1 unterbindende M302A/V304A-Mutation. Erstaunlicherweise war die endogene p21-Repression dieser Mutanten stärker als die des wildtypischen TBX3-Proteins. Alle drei Mutationen führten zu einer Stabilisierung des TBX3-Proteins. Die ursprünglich in Patienten mit Ulna-Mamma Syndrom identifizierte, DNA-bindungsdefekte Y149S-Mutante konnte weder p21-Luc noch endogenes p21 reprimieren. Mutationen in potentiellen Interaktionsdomänen für die Bindung der Co-Repressoren Groucho und C-terminalem Bindeprotein zeigten sowohl auf p21-Luc als auch auf endogenes p21-Gen wildtypische Repressoraktivität, so dass diese Co-Repressoren in COS-7-Zellen wahrscheinlich nicht an der Repression dieses Gens beteiligt sind. Da TBX2 und TBX3 interessante Ziele zur direkten Krebsbekämpfung darstellen, sollte ein zelluläres Reportersystem zur Identifikation TBX2-inhibierender, pharmakologisch aktiver Substanzen etabliert werden. Dazu sollte eine stabile Zelllinie mit vom p21-Promotor reguliertem d2EGFP-Reporter und Doxyzyklin-induzierbarem TBX2-Protein erzeugt werden, da ektopische Expression von TBX2 genetische Instabilität und Toxizität induzieren kann. In dieser Zelllinie sollte die TBX2-Expression zur Reduktion der d2EGFP-Fluoreszenz führen. Zur Erzeugung der Zelllinie wurden die folgenden drei Konstrukte Schritt-für-Schritt stabil in das Genom der Zielzelllinie COS-7 integriert: pEF1alpha-Tet3G, pTRE3G-TBX2 und p21-d2EGFP. Während die Herstellung der doppelt stabilen COS-7-Zelllinie gelang, scheiterte die Herstellung der dreifach stabilen Zelllinie.

Numerical evaluation of pollutant dispersion at a toll plaza based on system dynamics and Computational Fluid Dynamics models

The health of tollbooth workers is seriously threatened by long-term exposure to polluted air from vehicle exhausts. Using traffic data collected at a toll plaza, vehicle movements were simulated by a system dynamics model with different traffic volumes and toll collection procedures. This allowed the average travel time of vehicles to be calculated. A three-dimension Computational Fluid Dynamics (CFD) model was used with a k–ε turbulence model to simulate pollutant dispersion at the toll plaza for different traffic volumes and toll collection procedures. It was shown that pollutant concentration around tollbooths increases as traffic volume increases. Whether traffic volume is low or high (1500 vehicles/h or 2500 vehicles/h), pollutant concentration decreases if electronic toll collection (ETC) is adopted. In addition, pollutant concentration around tollbooths decreases as the proportion of ETC-equipped vehicles increases. However, if the proportion of ETC-equipped vehicles is very low and the traffic volume is not heavy, then pollutant concentration increases as the number of ETC lanes increases.

Strain localization effect on system reliability based design of bridge abutments under earthquake loading

The component and system reliability based design of bridge abutments under earthquake loading is presented in the paper. Planar failure surface has been used in conjunction with pseudo-dynamic approach to compute seismic active earth pressures on an abutment. The pseudo-dynamic method, considers the effect of phase difference in shear waves, soil amplification along with the horizontal seismic accelerations, strain localization in backfill soil and associated post-peak reduction in the shear resistance from peak to residual values along a previously formed failure plane. Four modes of stability viz. sliding, overturning, eccentricity and bearing capacity of the foundation soil are considered in the analysis. The series system reliability is computed with an assumption of independent failure modes. The lower and upper bounds of system reliability are also computed by taking into account the correlations between four failure modes, which is evaluated using the direction cosines of the tangent planes at the most probable points of failure.

Inference for the Component and System Lifetime Distribution of a k-unit Parallel System Based on System Data

In this paper, we consider the inference for the component and system lifetime distribution of a k-unit parallel system with independent components based on system data. The components are assumed to have identical Weibull distribution. We obtain the maximum likelihood estimates of the unknown parameters based on system data. The Fisher information matrix has been derived. We propose -expectation tolerance interval and -content -level tolerance interval for the life distribution of the system. Performance of the estimators and tolerance intervals is investigated via simulation study. A simulated dataset is analyzed for illustration.

Study on system identification of linear and non-linear liquid chromatography separation

The paper proposes the identification method of linear and non-linear chromatographic system. The non-linear isotherms and lumped mass transfer coefficients of chromatography separating sorbitol and mannitol are determined. And the theoretical elution curves calculated by non-linear chromatographic model are more accurate than those calculated by linear chromatographic model.

Effect of Improving Energy Efficiency on System Reliability

In the present scenario of energy demand overtaking energy supply top priority is given for energy conservation programs and policies. Most of the process plants are operated on continuous basis and consumes large quantities of energy. Efficient management of process system can lead to energy savings, improved process efficiency, lesser operating and maintenance cost, and greater environmental safety. Reliability and maintainability of the system are usually considered at the design stage and is dependent on the system configuration. However, with the growing need for energy conservation, most of the existing process systems are either modified or are in a state of modification with a view for improving energy efficiency. Often these modifications result in a change in system configuration there by affecting the system reliability. It is important that system modifications for improving energy efficiency should not be at the cost of reliability. Any new proposal for improving the energy efficiency of the process or equipments should prove itself to be economically feasible for gaining acceptance for implementation. In order to arrive at the economic feasibility of the new proposal, the general trend is to compare the benefits that can be derived over the lifetime as well as the operating and maintenance costs with the investment to be made. Quite often it happens that the reliability aspects (or loss due to unavailability) are not taken into consideration. Plant availability is a critical factor for the economic performance evaluation of any process plant.The focus of the present work is to study the effect of system modification for improving energy efficiency on system reliability. A generalized model for the valuation of process system incorporating reliability is developed, which is used as a tool for the analysis. It can provide an awareness of the potential performance improvements of the process system and can be used to arrive at the change in process system value resulting from system modification. The model also arrives at the pay back of the modified system by taking reliability aspects also into consideration. It is also used to study the effect of various operating parameters on system value. The concept of breakeven availability is introduced and an algorithm for allocation of component reliabilities of the modified process system based on the breakeven system availability is also developed. The model was applied to various industrial situations.

Interference between propagating changes and its effect on system failure

Computer-based, socio-technical systems projects are frequently failures. In particular, computer-based information systems often fail to live up to their promise. Part of the problem lies in the uncertainty of the effect of combining the subsystems that comprise the complete system; i.e. the system's emergent behaviour cannot be predicted from a knowledge of the subsystems. This paper suggests uncertainty management is a fundamental unifying concept in analysis and design of complex systems and goes on to indicate that this is due to the co-evolutionary nature of the requirements and implementation of socio-technical systems. The paper shows a model of the propagation of a system change that indicates that the introduction of two or more changes over time can cause chaotic emergent behaviour.

Impact of design of sharp non-uniform fibre Bragg gratings on system performance

The impact of design of sharp non-uniform fiber Bragg gratings on system performance was presented. The evolution of the Q-value of the worst channel against the propagation distance was shown. The results suggested that to apply approximated flat-dispersion gratings as inline filters in a periodic system, some post-compensation was included to account for the extra dispersion introduced by the gratings.

Signal processing techniques for reducing the impact of fiber nonlinearities on system performance

Signal processing techniques for mitigating intra-channel and inter-channel fiber nonlinearities are reviewed. More detailed descriptions of three specific examples highlight the diversity of the electronic and optical approaches that have been investigated.

TET inducible expression of the α4β7-integrin ligand MAdCAM-1 on the blood-brain barrier does not influence the immunopathogenesis of experimental autoimmune encephalomyelitis

Inhibiting the α4 subunit of the integrin heterodimers α4β1 and α4β7 with the mab natalizumab is an effective treatment of multiple sclerosis (MS). Which of the two α4 heterodimers is involved in disease pathogenesis has, however, remained controversial. Whereas the development of experimental autoimmune encephalomyelitis (EAE), an animal model of MS, is ameliorated in β7-integrin-deficient C57BL/6 mice, neutralizing antibodies against the β7-integrin subunit or the α4β7-integrin heterodimer fail to interfere with EAE pathogenesis in the SJL mouse. To facilitate α4β7-integrin-mediated immune-cell trafficking across the blood-brain barrier (BBB), we established transgenic C57BL/6 mice with endothelial cell-specific, inducible expression of the α4β7-integrin ligand mucosal addressin cell adhesion molecule (MAdCAM)-1 using the tetracycline (TET)-OFF system. Although TET-regulated MAdCAM-1 induced α4β7-integrin mediated interaction of α4β7(+) /α4β1(-) T cells with the BBB in vitro and in vivo, it failed to influence EAE pathogenesis in C57BL/6 mice. TET-regulated MAdCAM-1 on the BBB neither changed the localization of central nervous system (CNS) perivascular inflammatory cuffs nor did it enhance the percentage of α4β7-integrin(+) inflammatory cells within the CNS during EAE. In conclusion, our study demonstrates that ectopic expression of MAdCAM-1 at the BBB does not increase α4β7-integrin-mediated immune cell trafficking into the CNS during MOG(aa35-55)-induced EAE.