Concentrações plasmáticas de testosterona, triiodotironina (T3) e tiroxina (T4) em bodes submetidos ao estresse calórico

Para verificar o efeito do estresse calórico (EC) nas concentrações plasmáticas de testosterona, triiodotironina (T3) e tiroxina (T4), oito bodes, das raças Saanen (n=4) e Alpina (n=4), foram mantidos em câmara bioclimática, sob condições de termoneutralidade (13,0ºC a 26,7ºC) durante 30 dias e, após um período (60 dias) de descanso, submetidos ao EC (23,7ºC a 34,0ºC) por 30 dias. Para minimizar as variações sazonais nos perfis hormonais devido ao fotoperíodo, durante toda fase experimental, incluindo a de adaptação em condições de termoneutralidade (30 dias), o fotoperíodo foi controlado utilizando-se alternância de dias longos (16h de luz e 8h de escuro) e de dias curtos (8h de luz e 16h de escuro) a cada 30 dias. As amostras de sangue foram coletadas duas vezes por semana durante cinco semanas. No conjunto das raças, o EC não influenciou (P>0,05) as concentrações de testosterona (1,8±0,2 vs 1,3±0,2ng/ml) e nem a de T4 (52,7±2,8 vs 50,0±2,8ng/ml). Houve declínio (P<0,01) das concentrações de T3 nos animais submetidos ao experimento (1,3±0,1 vs 1,0±0,1ng/ml), mas a redução foi observada somente nos bodes Saanen. Em ambas as raças, as concentrações de T3 e T4 variaram (P<0,01) conforme o dia da coleta das amostras de sangue. O EC foi suficiente para produzir uma resposta fisiológica com redução das concentrações plasmáticas de T3 em bodes das raças Saanen, mas não da raça Alpina, assim como não foi capaz de alterar os níveis plasmáticos de testosterona e nem de T4.

Is sympathectomy at T4 level better than at T3 level for treating palmar hyperhidrosis?

Purpose: We compared the results from a video-assisted thoracoscopic sympathectomy (VTS) at the T4 denervation level with those from a VTS at the T3 level for the treatment of palmar hyperhydrosis (PH). Methods: Seventy patients with PH were prospectively followed for VTS at the T3 or T4 denervation levels for 6 months. The end points of this study were: absence of PH, compensatory hyperhydrosis (CH), and quality-of-life assessment. Results: Sixty-seven patients reported a complete resolution of PH after surgery. One failure occurred in the T3 group and 2 in the T4 group. When anhydrosis was obtained, we noticed totally dry hands in 26 patients in the T3 group and 6 patients in the T4 group. The other 27 patients in the T4 group and 8 in the T3 group maintained a small level of sweating and were also considered to be therapeutic successes. At 6 months, 25 patients in the T4 group had some degree of CH (71.42%) and all patients in the T3 group (100%), though the T4 group had a lower degree of severity of CH at the 6-month follow-up (P < 0.05). After the operation, quality of life was improved similarly in both groups. Conclusions: VTS at either the T3 or T4 level provides an effective treatment for PH. VTS at the T4 level is associated with a less severe form of CH. Despite the occurrence of CH, patients' quality of life is significantly improved following VTS at the T3 or T4 levels. For this reason, the T4 resection can now be used as a treatment for PH.

Exploiting pi-acceptors for the determination of thyroid hormones (T3 and T4) using a single interface flow system

A fully automated methodology was developed for the determination of the thyroid hormones levothyroxine (T4) and liothyronine (T3). The proposed method exploits the formation of highly coloured charge-transfer (CT) complexes between these compounds, acting as electron donors, and pi-acceptors such as chloranilic acid (CIA) and 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ). For automation of the analytical procedure a simple, fast and versatile single interface flow system (SIFA)was implemented guaranteeing a simplified performance optimisation, low maintenance and a cost-effective operation. Moreover, the single reaction interface assured a convenient and straightforward approach for implementing job`s method of continuous variations used to establish the stoichiometry of the formed CT complexes. Linear calibration plots for levothyroxine and liothyronine concentrations ranging from 5.0 x 10(-5) to 2.5 x 10(-4) mol L(-1) and 1.0 x 10(-5) to 1.0 x 10(-4) mol L(-1), respectively, were obtained, with good precision (R.S.D. <4.6% and <3.9%) and with a determination frequency of 26 h(-1) for both drugs. The results obtained for pharmaceutical formulations were statistically comparable to the declared hormone amount with relative deviations lower than 2.1%. The accuracy was confirmed by carrying out recovery studies, which furnished recovery values ranging from 96.3% to 103.7% for levothyroxine and 100.1% for liothyronine. (C) 2009 Elsevier B.V. All rights reserved.

Fatigue behaviour of friction stir welded AA2024-T3 alloy: longitudinal and transverse crack growth

The fatigue crack growth properties of friction stir welded joints of 2024-T3 aluminium alloy have been studied under constant load amplitude (increasing-Delta K), with special emphasis on the residual stress (inverse weight function) effects on longitudinal and transverse crack growth rate predictions (Glinka`s method). In general, welded joints were more resistant to longitudinally growing fatigue cracks than the parent material at threshold Delta K values, when beneficial thermal residual stresses decelerated crack growth rate, while the opposite behaviour was observed next to K-C instability, basically due to monotonic fracture modes intercepting fatigue crack growth in weld microstructures. As a result, fatigue crack growth rate (FCGR) predictions were conservative at lower propagation rates and non-conservative for faster cracks. Regarding transverse cracks, intense compressive residual stresses rendered welded plates more fatigue resistant than neat parent plate. However, once the crack tip entered the more brittle weld region substantial acceleration of FCGR occurred due to operative monotonic tensile modes of fracture, leading to non-conservative crack growth rate predictions next to K-C instability. At threshold Delta K values non-conservative predictions values resulted from residual stress relaxation. Improvements on predicted FCGR values were strongly dependent on how the progressive plastic relaxation of the residual stress field was considered.

Electrochemical study of modified cerium-silane bi-layer on Al alloy 2024-T3

In this paper, the performance of bis-1, 2-(triethoxysilyl) ethane (BTSE) as a pre-treatment to protect the AA 2024-T3 against corrosion has been investigated by electrochemical impedance spectroscopy (EIS), potentiodynamic polarization curves, and the scanning vibrating electrode technique (SVET). The microstructural and morphological characterizations were carried out via scanning electron microscopy and atomic force microscopy and the chemical composition evaluated using contact angle measurements and X-ray photoelectron spectroscopy (XPS). The electrochemical results showed that the additives improved the anticorrosion properties of the coating. The chemical characterization indicated that additives contribute to an increased degree of surface coverage, as well as to a more complete reticulation. The SVET results evidenced the self-healing abilities of Ce ions. (C) 2009 Elsevier Ltd. All rights reserved.

Investigation of the corrosion behaviour of AA 2024-T3 in low concentrated chloride media

Aluminium alloy (AA) 2024-T3 is an important engineering material due to its widespread use in the aerospace industry. However, it is very prone to localized corrosion attack in chloride containing media, which has been mainly associated to the presence of coarse intermetallics (IMs) in its microstructure. In this work the corrosion behaviour of AA 2024-T3 in low concentrated chloride media was investigated using microscopy and electrochemical methods. TEM/EDS observations on non-corroded samples evidenced the heterogeneous composition within the IMs. In addition, SEM observations showed that intermetallics with the same nominal composition present different reactivity, and that both types of coarse IMs normally found in the alloy microstructure are prone to corrosion. Moreover, EDS analyses showed important compositional changes in corroded IMs, evidencing a selective dissolution of their more active constituents, and the onset of an intense oxygen peak, irrespective to the IM nature, indicating the formation of corrosion products. On the other hand, the results of the electrochemical investigations, in accordance with the SEM/EDS observations, evidenced that IMs corrosion dominates the electrochemical response of the alloy during the first hours of immersion in the test electrolyte. (c) 2008 Elsevier Ltd. All rights reserved.

Electrochemical study of modified non-functional bis-silane layers on Al alloy 2024-T3

In the last few years great efforts have been made in order to find and to develop environmentally friendly substitutes for Cr6+ pre-treatments applied on aluminium alloys used in the aircraft industry. Among the potential substitutes, silane layers have attracted considerable interest from researchers and from the industry. The present work investigates the anti-corrosion behaviour of (bis-1, 2-(triethoxysilyl) ethane (BTSE)) silane layers modified with Ce ions and/or silica nanoparticles applied on Al alloy 2024-T3 substrates. The corrosion behaviour was investigated in 0.1 M NaCl solution via d.c. polarization and electrochemical impedance spectroscopy (EIS). Contact angle measurements and XPS were used to assess information on the chemistry of the silane pre-treated surfaces. The results have shown that the introduction of additives improves the corrosion protection properties of the silane layer. (c) 2008 Elsevier Ltd. All rights reserved.

Processo de conversão química da liga de alumínio 2024-T3 de aplicação aeronáutica

A presente tese teve por base o estudo da conversão química da liga de alumínio 2024T3 de aplicação aeronáutica. O trabalho experimental foi desenvolvido na OGMA, Indústria Aeronáutica de Portugal S.A., durante o período de, aproximadamente 1 ano, que coincidiu com a realização de um estágio profissional nesta empresa por parte da mestranda. A referida empresa, tem como actividade a prestação de serviços de Manutenção, Revisão, Modernização, de Aeronaves, Motores e Componentes, Fabricação e Montagem de Estruturas. Integrada na OGMA, encontra-se a área de tratamentos electroquímicos, TE’S, na qual são realizados serviços de manutenção de material aeronáutico e de peças de fabricação. Estes serviços baseiam-se em processos de electrodeposição e conversão química. De modo a garantir um controlo de qualidade e correcto funcionamento dos diversos processos existe, inserido na área TE’S, um laboratório químico. O presente trabalho experimental, realizado na área TE’S, assenta no processo de conversão química, por imersão, de provetes da liga Al 2024-T3, referente a todos os contratos da OGMA. Estes contratos possuem especificações para aplicação do revestimento de conversão química, por imersão, em alumínio e suas ligas. Estas especificações incluem requisitos de qualidade, nos quais se encontra inserido o controlo periódico do processo. Deste modo, o processo é sujeito a um controlo periódico mensal que consiste na avaliação da qualidade dos tratamentos. A qualidade dos revestimentos obtidos, por conversão química, é assegurada através da avaliação dos resultados dos ensaios aos provetes. O estudo experimental desenvolvido focou-se nos ensaios de resistência à corrosão (nevoeiro salino) requeridos nos contratos. O intuito de realizar um estudo sobre o processo de conversão química por imersão de provetes da liga Al 2024 T3 e subsequente foco no ensaio de resistência à corrosão (nevoeiro salino), assenta no facto de ter-se vindo a observar, nos últimos anos, corrosão por pitting em vários lotes destes provetes, após serem sujeitos às sequências de processo de conversão química e antes de perfazerem a totalidade de 168 horas na câmara de nevoeiro salino, não superando este critério de qualidade do revestimento. Na perspectiva de colmatar a referida situação, procedeu-se à realização de ensaios de despiste nos provetes representativos da liga, com especial incidência na variação dos intervalos de tempo de imersão, pré-estabelecidos pelas especificações aplicáveis, e observação do seu comportamento quando sujeitos ao ensaio de nevoeiro salino.

Origenis Opera omnia ex variis editionibus et codicibus manu exaratis gallicanis, italicis, germanicis et anglicis collecta : atque adnotationibus illustrata, cum copiosis indicibus, vita auctoris et multis dissertationibus. T3 / opera et studio DD. Caroli et Caroli Vincentii Delarue... ; accurante J.-P. Migne...

Collection : Patrologiae cursus completus ; 8-10

Value of PET/CT versus contrast-enhanced CT in identifying chest wall invasion (T3) by NSCLC [B-671]

Purpose: To determine the diagnostic value of 18F-FDG PET/CT versus contrastenhanced CT in identifying chest wall invasion by NSCLC. Methods and Materials: The primary selection criterion was a peripheral tumor of any size with contact to the chest wall. A total of 25 patients with pathologically proven NSCLC satisfied these criteria. Chest wall invasion was interpreted upon PET/CT when a frank costal or intercostal 18F-FDG uptake was identified with or without concomitant morphologic alterations. On the other hand, the existence of periosteal rib reaction/erosion, chest wall thickening or obliteration of the pleural fat layer either separately or combined were considered essential diagnostic criteria for disease extension into the chest wall upon contrast-enhanced CT. The results were correlated with the final histological analysis. Results: Among the studied cohort, 13/25 (52%) patients had chest wall invasion consistent with T3 disease. Both PET/CT and contrast-enhanced CT successfully identified 12/13 (92%) of these patients. The single false-negative result was due to parietal pleural invasion. On the other hand, one false-positive result was encountered by PET/CT in a dyspneic patient; whereas, CT analysis revealed false-positive results in six patients. In these patients, periosteal rib reaction (n = 2) or asymmetric enlargement of adjacent chest wall muscles (n = 1) were identified along with an obliterated pleural fat layer (n = 6). The sensitivity, specificity, and accuracy of PET/CT and contrast-enhanced CT were 92, 91 and 92% versus 92, 50 and 72%. Conclusion: 18F-FDG PET/CT is an accurate diagnostic modality in identifying.