TS-fuzzy controlled DFIG based wind energy conversion system

This paper focuses on the implementation of the TS (Tagaki-Sugino) fuzzy controller for the active power and the DC capacitor voltage control of the Doubly Fed Induction Generator (DFIG) based wind generator. DFIG system is represented by a third-order model where electromagnetic transients of the stator are neglected. The effectiveness of the TS-fuzzy controller on the rotor speed oscillations and the DC capacitor voltage variations of the DFIG damping controller on converter ratings of the DFIG system is also investigated. The results of the time domain simulation studies are presented to elucidate the effectiveness of the TS-fuzzy controller compared with conventional PI controller in the DFIG system. The proposed TS-fuzzy controller can improve the fault ride through capability of DFIG compared to the conventional PI controller

Application of TS-Fuzzy Controller for Active Power and DC Capacitor Voltage Control in DFIG-Based Wind Energy Conversion Systems

This chapter focuses on the implementation of the TS (Tagaki-Sugino) fuzzy controller for the Doubly Fed Induction Generator (DFIG) based wind generator. The conventional PI control loops for mantaining desired active power and DC capacitor voltage is compared with the TS fuzzy controllers. DFIG system is represented by a third-order model where electromagnetic transients of the stator are neglected. The effectiveness of the TS-fuzzy controller on the rotor speed oscillations and the DC capacitor voltage variations of the DFIG damping controller on converter ratings is also investigated. The results from the time domain simulations are presented to elucidate the effectiveness of the TS-fuzzy controller over the conventional PI controller in the DFIG system. The proposed TS-fuzzy con-troller can improve the fault ride through capability of DFIG compared to the conventional PI controller.

Extracción de servicios TS en receptor profesional de DVB-T2.

[Es]Este documento explica el procedimiento seguido para desarrollar la última etapa de un decodificador de DVB-T2, que consiste en la extracción de un archivo de vídeo desde un archivo binario resultante del resto del decodificador. Este decodificador se trata del software de un receptor desarrollado por el departamento de TSR (Tratamiento de Señal y Radiocomunicaciones) de la Escuela de Ingenieros de Bilbao en el año 2010. Dicho software es capaz de analizar la señal recibida de DVB-T2 para calcular la tasa de errores y conocer otros parámetros relevantes como el tipo de modulación utilizado. No obstante, para analizar de manera subjetiva las mejoras de DVB-T2 e incluso para determinar de qué manera afectan los errores a la calidad de la imagen es necesario visualizar el video transmitido. Por esta razón se ha comenzado un proyecto en el que el objetivo es programar un nuevo software que proporcione un archivo que contenga el video en cuestión. Este software se ha programado en lenguaje del programa Matlab, y toma el fichero resultante del receptor como entrada, para procesarlo y obtener uno nuevo con el vídeo. De modo que una vez programado y probado para su corrección, se aplica a continuación del receptor del departamento TSR. Una vez obtenido el vídeo es posible comparar la calidad de la imagen con diferentes tasas de error en la comunicación, simulando transmisiones en diferentes ámbitos cada uno con su correspondiente ruido. De esta manera, se estima con muy alta precisión el comportamiento de una transmisión real dependiendo de la climatología y otros factores que afecten a la relación señal a ruido.

溴化锂水溶液温度—熵(T—S)图

本文从最基本的热力学关系式出发，推导出溴化锂水溶液液相熵的积分方程式和汽相熵的表达式，通过数值计算的方法，求出一系列状态点的参数值，然后在T—S座标系中描绘出等浓度线群和两组等压线群。计算液相熵值时，首先假定溶液经历等浓度过程，计算出一组等浓度线，然后利用溶液的状态方程求出一系列状态点的参数值，根据这些参数在同一图上作出等压线。计算汽相熵值时假定溶液汽液两相平衡时压力较低，可以引用理想气体的比热关系式，因此可推导出汽相熵的表达式，据此表达式可以描绘出一组汽相等压线。描绘出溴化锂水溶液的T—S图以后，以一个实际的吸收式制冷循环作为例子，说明在该图上的表示情况。

Effect of acidity in TS-1 zeolites on product distribution of the styrene oxidation reaction

The role of Bronsted acidity of titanium silicalite zeolite (with different ratios of Si/Ti) in oxidation reactions of styrene has been investigated and discussed. For zeolites with Si/Ti > 42, most of the titanium is in the zeolite framework. These framework titanium species, which act both as the isolated titanium centers and as Bronsted acidity centers (together with the Bronsted acidity produced by the tetrahedral aluminum impurity introduced during synthesis), can catalyze both the epoxidation and the succeeding rearrangement reactions, thus promoting the formation of phenylacetaldehyde. With an increase in the titanium content of the zeolite, titanium will tend to stay outside the zeolite lattice, except for the TiOx nanophases which can be occluded in the zeolite channels or on the external surface. These non-framework titanium species are favorable for the carbon-carbon bond scission, leading to the production of additional benzaldehyde. The catalytic performances of these zeolites with different Si/Ti ratios are correlated here with their structural information by using solid-state NMR and UV-Vis methods. (C) 2003 Elsevier B.V. All rights reserved.

NMR study on the acidity of TS-1 zeolite

The acidic properties of TS-1 and Silicalite-I zeolites have been investigated by the solid-state MAS NMR technique capable of in situ sample pretreatment. As shown by a combination of the P-31 MAS NMR and H-1 MAS NMR techniques with trimethylphosphine, not only Bronsted acid sites but also Lewis acid sites exist in the TS-1 zeolites. Moreover, TS-1 zeolite is more acidic compared with Silicalite-1. The H-1, Si-29 MAS NMR spectra and the resonance related to Bronsted acid species in the P-31 MAS NMR spectra demonstrate clearly that the presence of titanium in the framework results in the formation of a new hydroxy group, titanols, which is more acidic than silanols of Silicalite-1. The P-31 MAS NMR measurements also illustrate convincingly the existence of at least two different Lewis acid species on the TS-1 zeolites. The conversion of propylene oxide into methoxypropanol catalyzed by TS-1 or Silicalite-I zeolite in methanol solution as a test reaction has also been described. With the increase of titanium in zeolite, TS-1 appears to have a higher activity during the reaction of propylene oxide to methoxypropanol.