New method of preserving sweet potatoes /

Reprint.

Experimental and modeling studies of forced convection storage and drying systems for sweet potatoes

Sweet potato is an important strategic agricultural crop grown in many countries around the world. The roots and aerial vine components of the crop are used for both human consumption and, to some extent as a cheap source of animal feed. In spite of its economic value and growing contribution to health and nutrition, harvested sweet potato roots and aerial vine components has limited shelf-life and is easily susceptible to post-harvest losses. Although post-harvest losses of both sweet potato roots and aerial vine components is significant, there is no information available that will support the design and development of appropriate storage and preservation systems. In this context, the present study was initiated to improve scientific knowledge about sweet potato post-harvest handling. Additionally, the study also seeks to develop a PV ventilated mud storehouse for storage of sweet potato roots under tropical conditions. In study one, airflow resistance of sweet potato aerial vine components was investigated. The influence of different operating parameters such as airflow rate, moisture content and bulk depth at different levels on airflow resistance was analyzed. All the operating parameters were observed to have significant (P < 0.01) effect on airflow resistance. Prediction models were developed and were found to adequately describe the experimental pressure drop data. In study two, the resistance of airflow through unwashed and clean sweet potato roots was investigated. The effect of sweet potato roots shape factor, surface roughness, orientation to airflow, and presence of soil fraction on airflow resistance was also assessed. The pressure drop through unwashed and clean sweet potato roots was observed to increase with higher airflow, bed depth, root grade composition, and presence of soil fraction. The physical properties of the roots were incorporated into a modified Ergun model and compared with a modified Shedd’s model. The modified Ergun model provided the best fit to the experimental data when compared with the modified Shedd’s model. In study three, the effect of sweet potato root size (medium and large), different air velocity and temperature on the cooling/or heating rate and time of individual sweet potato roots were investigated. Also, a simulation model which is based on the fundamental solution of the transient equations was proposed for estimating the cooling and heating time at the centre of sweet potato roots. The results showed that increasing air velocity during cooling and heating significantly (P < 0.05) affects the cooling and heating times. Furthermore, the cooling and heating times were significantly different (P < 0.05) among medium and large size sweet potato roots. Comparison of the simulation results with experimental data confirmed that the transient simulation model can be used to accurately estimate the cooling and heating times of whole sweet potato roots under forced convection conditions. In study four, the performance of charcoal evaporative cooling pad configurations for integration into sweet potato roots storage systems was investigated. The experiments were carried out at different levels of air velocity, water flow rates, and three pad configurations: single layer pad (SLP), double layers pad (DLP) and triple layers pad (TLP) made out of small and large size charcoal particles. The results showed that higher air velocity has tremendous effect on pressure drop. Increasing the water flow rate above the range tested had no practical benefits in terms of cooling. It was observed that DLP and TLD configurations with larger wet surface area for both types of pads provided high cooling efficiencies. In study five, CFD technique in the ANSYS Fluent software was used to simulate airflow distribution in a low-cost mud storehouse. By theoretically investigating different geometries of air inlet, plenum chamber, and outlet as well as its placement using ANSYS Fluent software, an acceptable geometry with uniform air distribution was selected and constructed. Experimental measurements validated the selected design. In study six, the performance of the developed PV ventilated system was investigated. Field measurements showed satisfactory results of the directly coupled PV ventilated system. Furthermore, the option of integrating a low-cost evaporative cooling system into the mud storage structure was also investigated. The results showed a reduction of ambient temperature inside the mud storehouse while relative humidity was enhanced. The ability of the developed storage system to provide and maintain airflow, temperature and relative humidity which are the key parameters for shelf-life extension of sweet potato roots highlight its ability to reduce post-harvest losses at the farmer level, particularly under tropical climate conditions.

How to make sweet potato flour, starch, sugar, bread and mock cocoanut /

Cover title.

Sweet potato production and handling in California /

Mode of access: Internet.

The sweet potato,

Mode of access: Internet.

Agronomic performance of selected sweet potato cultivars under greenhouse and field infested with meloigogyne incognita and soilborne insect pests.

The root knot nematode (RKN), Meloidogyne incognita, is widespread worldwide and a major pathogen of several cultivated crops. The use of resistant genotypes is the most effective and environmentally sound way to manage RKN. In this study, we screened 16 selected sweet potato cultivars including Amanda, Bárbara, Beatriz, Beauregard, Brazlândia Branca, Brazlândia Rosada, Brazlândia Roxa, BRS Amélia, BRS Cuia, BRS Rubissol, Carolina Vitória, Duda, Júlia, Marcela, PA-26/2009, and Princesa obtained from Embrapa and Universidade Federal do Tocantins? germplasm bank. Studies were conducted under greenhouse and field conditions and the agronomic performance of the cultivars was evaluated in a nematode and soilborne insect-infested field. All 16 sweet potato cultivars tested were rated as resistant to this nematode both under greenhouse and field conditions with reproduction factors < 1. In the field infested with M. incognita, sweet potato cultivars Duda, BRS Amélia, Beauregard, Brazlândia Rosada, and Brazlândia Roxa stood out as superior cultivars, with average yield ranging from 26 to 47 tons per ha. Overall, most cultivars exhibited a fusiform to near fusiform root shape, a good characteristic for the market, and were moderately affected by insects (attack incidence 1 to 30%). As global demand for energy continues to rise, selecting new cultivars of sweet potatoes with increased resistance to nematode diseases and with high yield will be important for food security and biofuel production.

Development and promotion of Integrated Pest Management strategies for Silverleaf whitefly in vegetables

This final report ‘Development and promotion of IPM strategies for silverleaf whitefly in vegetables’ summarises the research and extension into development and implementation of IPM programs for silverleaf whitefly in vegetables. Chemical and biologicontrol for Silverleaf Whitefly in pumpkin, brassica, bean and sweet potatoes.

Soil fertility in sweetpotato-based cropping systems in the highlands of Papua New Guinea

The main outputs anticipated include enchanced knowledge of key water-nutrient dynamics in relation to key soil management techniques and a suite of improved and practical soil management options in sweet potatoes.

干旱和复水条件下转基因甘薯的光合特性

以转铜锌超氧化物歧化酶(Cu/Zn SOD)和抗坏血酸过氧化物酶(APX)基因甘薯(TS)及未转基因甘薯(NT)为实验材料,研究在旱后复水条件下转基因甘薯及未转基因甘薯抗氧化酶活性和光合特性变化。结果显示,连续36 h胁迫条件下,TS和NT的SOD活性都先降低后升高,但TS的SOD活性始终高于NT。胁迫至24 h时,TS的SOD活性约为NT的1.2倍,复水后二者SOD活性都下降。持续胁迫,TS的APX活性先升高后降低,NT与之相反,复水后TS和NT的APX活性都是先升高后降低,复水12 h,TS的APX活性是NT的1.5倍。水分胁迫条件下TS的膜质受伤害程度要轻于NT,胁迫24 h,复水12 h,NT的MDA含量均约为TS的1.2倍。胁迫12 h,TS和NT净光合速率都下降,继续胁迫,TS净光合速率开始上升,NT几乎保持不变,胁迫36 h,TS的净光合速率约为NT的1.5倍。复水后二者净光合速率都开始上升,复水12 h,TS净光合速率约为NT的3倍。胁迫时TS、NT胞间CO2浓度(Ci)都逐渐增大,胁迫36 h时NT胞间CO2浓度显著高于TS,是其1.4倍。实验结果表明,同时转入SOD、APX抗氧化基因后,在...

Manejo integrado da mosca-branca Bemisia argentifolii.

Historico; Classificacao sistematica, descricao morfologica, biologia e danos; Ecologia; Hospedeiras e febologia; Metodos de controle de pragas; Manejo integrado.

Seletividade de trifluralin incorporado ao solo para batata-doce

No Estado de São Paulo, a batata-doce é cultivada em escala comercial como produto hortigranjeiro. em vista das dificuldades para o controle manual e o mecanizado das plantas infestantes da cultura, há grande interesse pelo método químico desse controle. Com essa finalidade, tanto pelo baixo custo relativo como pelas facilidades técnicas de utilização, o trifluralin desperta a atenção dos agricultores. Para avaliar a seletividade do herbicida para essa cultura, foi realizado um experimento em vasos, com doses crescentes do produto, nas seguintes concentrações: 0,00; 0,11; 0,22; 0,44; 0,88; 1,76 e 3,52 mg.kg-1 de i.a. em peso. Os resultados mostraram que, a partir da dose de 0,22 mg.kg-1 de i.a., o trifluralin interferiu negativamente e em escala exponencial sobre os parâmetros: comprimento das ramas, número de folhas, peso da massa seca da parte aérea e das raízes, avaliados aos 30 dias, revelando-se não seletivo para a batata-doce quando incorporado ao solo, em profundidades semelhantes às da zona de enraizamento das plantas.

O cultivo de yacon no Brasil

O yacon (Polymnia sonchifolia Poep. Endl.) é uma espécie da família Asteraceae que apresenta um complexo sistema subterrâneo. Suas raízes tuberosas e rizóforos contêm grandes quantidades de frutose e glicose livres, além de fruto-oligossacarídeos do tipo inulina como carboidrato de reserva. Vem despertando interesse principalmente por suas propriedades medicinais, sendo utilizado como auxiliar no tratamento contra diabetes e colesterol. Foi introduzido no Brasil por volta de 1989, porém somente em 1994 iniciaram-se os primeiros cultivos comerciais. Atualmente é cultivado na região de Capão Bonito (SP), a partir de rizóforos pesando de 60 a 80 g. Estes são plantados em canteiros de 0,30 - 0,40 m de altura por 1,0 m de base, em um espaçamento de 1,00 x 0,90 m. O pH do solo é ajustado para 6,0 e a fertilização básica é realizada com NPK + Zn, de acordo com análise e a recomendação utilizada para batata doce. Posteriormente são aplicados 40 kg.ha-1 de N em duas parcelas. A irrigação é feita por aspersão e a colheita realizada entre os 8 e 10 meses após o plantio, obtendo-se um rendimento médio de 80 t.ha-1 de raízes e 1 t.ha-1 de folhas desidratadas. Tanto as raízes como as folhas podem ser consumidas frescas ou desidratadas em estufas com ventilação forçada, à temperatura máxima de 50°C, para se evitar a degradação dos carboidratos de reserva e das substâncias do metabolismo secundário.

Produção e caracterização de maltodextrinas a partir de amidos de mandioca e batata-doce

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produção de resíduos sólidos de matérias-primas amiláceas na fabricação de bioetanol para analise de segurança em alimentação de ratos Wistar

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Produção de hidrolisado enzimático de farinha de batata-doce para fermentação etanólica

Recently there is a great quest of producing alcohol from starchy resources, replacing the sugar cane. The most common starchy sources are cassava, maize and sweet potatoes and a lot of research are been realized with excellent results. In this work it was evaluated the influence of the concentration of dry matter on the enzymatic hydrolysis process of starch from sweet potato for ethanol production. Through the sweet potato was produced a flour using a low-cost method and easy operation equipments. The sweet potato flour was characterized physical and chemically and from these results was prepared the treatments for enzymatic hydrolysis. The experimental design considered as independent variable the dry matter concentration of the sweet potato flour in 3 levels; 10, 15 and 20% in the formulation of suspensions. The other variables were keeping constant being: temperature in the 1° hydrolysis step of 90°C and time of 2 hours; temperature in the 2° saccharification step of 60°C and time of 17 hours. The hydrolysates obtained at the three assays were transferred to six liter enlerynmeyer and inoculated with a biologic catalyst, Saccharomyces, dehydrated yeasts of Saccharomyces cerevisiae CAT 1, at a rate of 5% in weight. The flasks were placed in a shaker type orbital with controlled temperature of 30°C during a time of 15 hours. The initial reducer sugars concentration and respective ethanol concentrations in wine were: 11.2% glucose and 2.16% ethanol in the suspension with 10% of dry matter; 13.5% glucose and 4.39% ethanol with 15% and 17.5% glucose and 6.03% ethanol in suspension with 20% of dry matter. ix The results showed that the higher percentage of dry matter carried out to higher sugar yield in hydrolyzed. It was possible observed that products quality improved with a higher concentration of dry matter