Towards an understanding of bacterial metabolites prodigiosin and violacein and their potential for use in commercial sunscreens

Synopsis
Objectives

To exploit the microbial ecology of bacterial metabolite production and, specifically, to: (i) evaluate the potential use of the pigments prodigiosin and violacein as additives to commercial sunscreens for protection of human skin, and (ii) determine antioxidant and antimicrobial activities (against pathogenic bacteria) for these two pigments.

Methods
Prodigiosin and violacein were used to supplement extracts of Aloe vera leaf and Cucumis sativus (cucumber) fruit which are known to have photoprotective activity, as well as some commercial sunscreen preparations. For each, sunscreen protection factors (SPFs) were determined spectrophotometrically. Assays for antimicrobial activity were carried out using 96-well plates to quantify growth inhibition of Staphylococcus aureus and Escherichia coli.
Results
For the plant extracts, SPFs were increased by an order of magnitude (i.e. up to ~3.5) and those for the commercial sunscreens increased by 10–22% (for 4% w/w violacein) and 20–65% (for 4% w/w prodigiosin). The antioxidant activities of prodigiosin and violacein were approximately 30% and 20% those of ascorbic acid (a well-characterized, potent antioxidant). Violacein inhibited S. aureus (IC_{506.99 ± 0.146 μM) but not E. coli, whereas prodigiosin was effective against both of these bacteria (IC50 values were 0.68 ± 0.06 μM and 0.53 ± 0.03 μM, respectively).}

Conclusion
The bacterial pigments prodigiosin and violacein exhibited antioxidant and antimicrobial activities and were able to increase the SPF of commercial sunscreens as well as the extracts of the two plant species tested. These pigments have potential as ingredients for a new product range of and, indeed, represent a new paradigm for sunscreens that utilize substances of biological origin. We discussed the biotechnological potential of these bacterial metabolites for use in commercial sunscreens, and the need for studies of mammalian cells to determine safety.

Development of an anti aging cream with AHA/BHA and sunscreens

The skin aging is a matter of discomfort verified in the population. Thus, every day, new products are launched on the market to offer different manners to prevent the premature aging of the skin. In this context, active substances, as alpha and beta hidroxyacids (AHA/BHA), beyond the sunscreens, are considered a way of prevention and amelioration of the effects caused in the skin due to the time. The aim of this study was to develop and evaluate a cosmetic cream containing AHA/BHA and sunscreen. It was studied in relation to its physical-chemical and microbiological characteristics. According to the results, the formulation developed present a shelf life of 758 days and the preservative system was effective. Considering the parameters evaluated, the cream probably would be commercially accepted.

Development of an anti-aging cream with AHA/BHA and sunscreens

The skin aging is a matter of discomfort verified in the population. Thus, every day, new products are launched on the market to offer different manners to prevent the premature aging of the skin. In this context, active substances, as alpha and beta hidroxyacids (AHA/BHA), beyond the sunscreens, are considered a way of prevention and amelioration of the effects caused in the skin due to the time. The aim of this study was to develop and evaluate a cosmetic cream containing AHA/BHA and sunscreen. It was studied in relation to its physical-chemical and microbiological characteristics. According to the results, the formulation developed present a shelf life of 758 days and the preservative system was effective. Considering the parameters evaluated, the cream probably would be commercially accepted.

Outdoor worker sun protection project : a comprehensive applied research project to demonstrate the effectiveness of sun protection measures which influence high risk outdoor workers in Queensland to adopt sun safe behaviour practices 2010 – 2013

The QUT Outdoor Worker Sun Protection (OWSP) project undertook a comprehensive applied health promotion project to demonstrate the effectiveness of sun protection measures which influence high risk outdoor workers in Queensland to adopt sun safe behaviours. The three year project (2010-2013) was driven by two key concepts: 1) The hierarchy of control, which is used to address risks in the workplace, advocates for six control measures that need to be considered in order of priority (refer to Section 3.4.2); and 2) the Ottawa Charter which recommends five action means to achieve health promotion (refer to Section 2.1). The project framework was underpinned by a participatory action research approach that valued peoples’ input, took advantage of existing skills and resources, and stimulated innovation (refer to Section 4.2). Fourteen workplaces (small and large) with a majority outdoor workforce were recruited across regional Queensland (Darling Downs, Northwest, Mackay and Cairns) from four industries types: 1) building and construction, 2) rural and farming, 3) local government, and 4) public sector. A workplace champion was identified at each workplace and was supported (through resource provision, regular contact and site visits) over a 14 to 18 month intervention period to make sun safety a priority in their workplace. Employees and employers were independently assessed for pre- and postintervention sun protection behaviours. As part of the intervention, an individualised sun safety action plan was developed in conjunction with each workplace to guide changes across six key strategy areas including: 1) Policy (e.g., adopt sun safety practices during all company events); 2) Structural and environmental (e.g., shade on worksites; eliminate or minimise reflective surfaces); 3) Personal protective equipment (PPE) (e.g., trial different types of sunscreens, or wide-brimmed hats); 4) Education and awareness (e.g., include sun safety in inductions and toolbox talks; send reminder emails or text messages to workers);5) Role modelling (e.g., by managers, supervisors, workplace champions and mentors); and 6) Skin examinations (e.g., allow time off work for skin checks). The participatory action process revealed that there was no “one size fits all” approach to sun safety in the workplace; a comprehensive, tailored approach was fundamental. This included providing workplaces with information, resources, skills, know how, incentives and practical help. For example, workplaces engaged in farming complete differing seasonal tasks across the year and needed to prepare for optimal sun safety of their workers during less labour intensive times. In some construction workplaces, long pants were considered a trip hazard and could not be used as part of a PPE strategy. Culture change was difficult to achieve and workplace champions needed guidance on the steps to facilitate this (e.g., influencing leaders through peer support, mentoring and role modelling). With the assistance of the project team the majority of workplaces were able to successfully implement the sun safety strategies contained within their action plans, up skilling them in the evidence for sun safety, how to overcome barriers, how to negotiate with all relevant parties and assess success. The most important enablers to the implementation of a successful action plan were a pro-active workplace champion, strong employee engagement, supportive management, the use of highly visual educational resources, and external support (provided by the project team through regular contact either directly through phone calls or indirectly through emails and e-newsletters). Identified barriers included a lack of time, the multiple roles of workplace champions, (especially among smaller workplaces), competing issues leading to a lack of priority for sun safety, the culture of outdoor workers, and costs or budgeting constraints. The level of sun safety awareness, knowledge, and sun protective behaviours reported by the workers increased between pre-and post-intervention. Of the nine sun protective behaviours that were assessed, the largest changes reported included a 26% increase in workers who “usually or always” wore a broad-brimmed hat, a 20% increase in the use of natural shade, a 19% increase in workers wearing long-sleeved collared shirts, and a 16% increase in workers wearing long trousers.

Self-organization and dynamics of nanoparticles in chemically active plasmas for low-temperature deposition of silicon and carbon-based nanostructured films

Self-organization and dynamic processes of nano/micron-sized solid particles grown in low-temperature chemically active plasmas as well as the associated physico-chemical processes are reviewed. Three specific reactive plasma chemistries, namely, of silane (SiH4), acetylene (C 2H2), and octafluorocyclobutane (c-C4F 8) RF plasma discharges for plasma enhanced chemical vapor deposition of amorphous hydrogenated silicon, hydrogenated and fluorinated carbon films, are considered. It is shown that the particle growth mechanisms and specific self-organization processes in the complex reactive plasma systems are related to the chemical organization and size of the nanoparticles. Correlation between the nanoparticle origin and self-organization in the ionized gas phase and improved thin film properties is reported. Self-organization and dynamic phenomena in relevant reactive plasma environments are studied for equivalent model systems comprising inert buffer gas and mono-dispersed organic particulate powders. Growth kinetics and dynamic properties of the plasma-assembled nanoparticles can be critical for the process quality in microelectronics as well as a number of other industrial applications including production of fine metal or ceramic powders, nanoparticle-unit thin film deposition, nanostructuring of substrates, nucleating agents in polymer and plastics synthesis, drug delivery systems, inorganic additives for sunscreens and UV-absorbers, and several others. Several unique properties of the chemically active plasma-nanoparticle systems are discussed as well.

Avaliação do potencial fotoprotetor de extratos de musgos e investigação de seus riscos toxicológicos

A radiação ultravioleta (UV) induz diversos efeitos nocivos nos organismos e a quantidade desta radiação que atinge a biosfera é afetada pela concentração de ozônio, latitude, altitude, clima e reflexão especular. As respostas de briófitas em relação aos efeitos da radiação UV e a presença de compostos que absorvem esta radiação têm sido estudadas. Sanionia uncinata, Holomitriopsis laevifolia e Leucobryum laevifolium são espécies de musgos encontrados em locais expostos a alta incidência de radiação UV e com habitats distintos. Considerando que as respostas de musgos contra os efeitos da radiação UV e seus mecanismos de proteção ainda são pouco caracterizados, o objetivo deste estudo foi investigar o potencial fotoprotetor e possíveis riscos toxicológicos associados aos extratos dos musgos S. uncinata, proveniente da Antártica e H. laevifolia e L. laevifolium, proveniente do Amazonas. Seus extratos metanólico (EM), aquoso (EA), hidroalcoólico (EH) e etanólico (EE) foram estudados com a caracterização química por absorção ao UV e visível e pela cromatografia líquida de alta eficiência; quantificação do índice total de compostos fenólicos; determinação da capacidade captadora do radical 2,2-difenil-1-picril-hidrazila a fim de avaliar as atividades antioxidantes; avaliação do potencial de fotoproteção cutânea pela determinação do fator de proteção solar; avaliações do potencial mutagênico e citototóxico, através do ensaio de Salmonella/microssoma, utilizando as cepas TA97, TA98, TA100, TA102 e TA104; do potencial fotomutagênico através do ensaio de fotomutagenicidade, usando as cepas TA102 e TA104; e investigação dos efeitos genotóxicos e fotogenotóxicos, pelo ensaio de micronúcleo e fotomicronúcleo, respectivamente, usando diferentes linhagens celulares estabelecidas. Foram encontradas atividades fotoprotetoras e antioxidantes e observou-se que os extratos se apresentaram singulares devido a sua composição química. Os resultados fotoprotetores, além dos mutagênicos/fotomutagênicos, genotóxicos/fotogenotóxicos e suas respectivas avaliações citotóxicas também permitiram selecionar extratos e suas concentrações, como promissores candidatos em fotoproteção Assim, os EA e EH de H. laevifolia e L. laevifolium apresentam, no geral, os resultados mais significativos, tornando-se potenciais para avaliações refinadas em fotoproteção e na separação de componentes que possam levar a futuras aplicações como antioxidantes e protetores solares ou como adjuvantes.

Les effets de revêtements de surface sur la dissolution et la bioaccumulation de nanoparticules d'oxyde de zinc par l'algue unicellulaire, C. reinhardtii

Au cours de la dernière décennie, les nanoparticules ont connu un essor sans précédent dans plusieurs domaines. On peut retrouver ces nanoparticules dans des secteurs aussi variés tels que la médecine, l’électronique, les écrans solaires, les cosmétiques et les plastiques, pour ne nommer que ceux-là. Cette utilisation massive a eu un effet pervers sur l’environnement, sachant qu’une grande partie de ces produits se sont retrouvés inévitablement dans les milieux naturels. Plusieurs études révèlent qu’autant la présence des nanoparticules que leurs produits de dissolution sont à prendre en considération lorsque des travaux toxicologiques ou le devenir de ces matériaux sont étudiés. Il est désormais clair que les propriétés de surface de ces nanoparticules jouent un rôle central sur leur comportement dans les solutions aqueuses; que ce soit les interactions avec des organismes ou entre les particules elles-mêmes. Afin d’évaluer le devenir de nZnO, une étude sur la dissolution ainsi que la bioaccumulation a été réalisée avec l’algue modèle Chlamydomonas reinhardtii en présence de nanoparticules ayant différents enrobages. Les nanoparticules d’oxyde de zinc suivantes ont été étudiées : (i) nZnO sans enrobage (nZnO); (ii) nZnO avec enrobage d’acide polyacrylique (nZnO-PAA) et (iii) nZnO avec enrobage d’hexamétaphosphate de sodium (nZnO-HMP). La dissolution était mesurée à l’aide de trois techniques : ultrafiltration par centrifugation (CU); technique potentiométrique (scanned stripping chronopotentiometry, SSCP) et spectrométrie de masse – plasma à couplage inductif couplé à une résine échangeuse d’ions (resin-based inductively coupled plasma-mass spectrometry, resin-based ICP-MS). Les résultats obtenus démontrent une grande tendance à la dissolution pour le nZnO (presque totale) tandis que pour le nZnO-PAA et le nZnO-HMP, la dissolution est dépendante de la nature de l’enrobage le composant. Pour la bioaccumulation sur l’algue testée, les données montrent une grande dépendance au zinc libre issu de la dissolution pour nZnO et nZnO-PAA. À l’inverse, le nZnO-HMP démontre une bioaccumulation plus élevée par comparaison aux mêmes concentrations d’expositions du zinc libre, expliquée par la stimulation de l’internalisation du zinc provoqué par la présence de phosphate constituant l’enrobage de nZnO-HMP.

Plan de mercadeo para el lanzamiento de la marca Coppertone® en Colombia

Las razones que motivan la realización de este trabajo de investigación radican en que los productos de filtración y protección solar ocupan una alta demanda en Colombia gracias a su posición geográfica y condición climática, lo que hace que sean de consumo masivo gracias a que abastecen necesidades tanto al nivel de salud como estético en personas de todas las edades. A pesar de que se reconoce que la marca a introducir en el mercado colombiano -Coppertone®- cuenta con una trayectoria de más de 60 años en el mercado internacional, y que además su primer producto fue el primer protector solar en el mercado, resulta necesario realizar un estudio y caracterización al nivel nacional, de manera que permita reconocer los distintos agentes que participan en el mismo, las oportunidades, amenazas, alternativas y mecanismos de comercialización con los cuales MSD puede contar y debe tener en cuenta a la hora de introducir en Colombia dicha marca.

Influência de substâncias bioativas na estabilidade fisico-química e funcional de emulsões fotoprotetoras

Autilização de filtros ultravioletas isolados em formulações fotoprotetoras, origina produtos com proteção limitada contra as radiações solares, o que evidencia a necessidade de associar compostos bioativos. Estudos anteriores demonstraram que a rutina, um composto bioativo, interage sinergicamente com filtros solares incorporados em preparações fotoprotetoras. Portanto, este trabalho teve como objetivo avaliar a influência da rutina sobre a estabilidade físico-química e funcional de emulsões fotoprotetoras. 16 formulações foram desenvolvidas, submetidas ao teste de estabilidade preliminar e caracterizadas de acordo com o pH, perfil reológico e eficácia fotoprotetora in vitro . A formulação com o melhor desempenho e a formulação correspondente, sem rutina, foram submetidos ao teste de estabilidade normal. Todas as formulações apresentaram valores de pH compatível com a pele e comportamento reológico semelhante. A formulação F16 e a mesma formulação, sem rutina, foram submetidas ao teste de estabilidade normal e apresentaram valores de pH semelhantes e perfis reológicos que foram mantidos ao longo dos dias de análise. Aatividade antirradicalar foi estável apenas para formulações armazenadas a 5,0 ± 0,5°C. A eficácia fotoprotetora demonstrou resultados semelhantes entre ambas as formulações, que também foi observado em todos os dias de análise. Em conclusão, rutina não influenciou a fotoestabilidade da formulação sob as condições adotadas.

Estabilidade e eficácia de fotoprotetores contendo filtros inorgânicos e quercetina

A exposição ao sol traz benefícios à saúde, no entanto, o excesso pode ocasionar danos cutâneos dentre os quais se destacam as neoplasias. A fotoproteção é um método para a prevenção dos efeitos danosos da radiação ultravioleta (UV) e a biodiversidade Brasileira é campo fértil para pesquisas nesta área. Dessa forma, os objetivos deste estudo envolveram o desenvolvimento de formulações fotoprotetoras contendo quercetina (composto bioativo) e filtros solares físicos (dióxido de titânio e óxido de zinco), com posterior caracterização das formulações e avaliação da sua estabilidade. As formulações contendo o composto bioativo, isolado ou em associação com os filtros físicos, possuíram valores de pH biocompatíveis com a pele,intervalo de viscosidade aparente entre 10550 e 23600 cP; fator de proteção solar (FPS) estimado entre 2.1 e 22.5; e amplo espectro de proteção, com comprimentos de onda crítico acima de 379 nm. Constatou-se que não foi adequado utilizar a quercetina associada aos filtros solares físicos devido às interações negativas que ocorreram entre o composto e os metais, somente identificadas ao longo do estudo de estabilidade. No entanto, em função da eficácia estimada in vitro apresentada pelo flavonoide, seu uso ainda pode ser explorado como substituto alternativo aos filtros solares clássicos.

Reliable and fast sensor for in vitro evaluation of solar protection factor based on the photobleaching kinetics of a nanocrystalline TiO(2)/dye UV-dosimeter

A reliable and fast sensor for in vitro evaluation of solar protection factors (SPFs) of cosmetic products, based on the photobleaching kinetics of a nanocrystalline TiO(2)/dye UV-dosimeter, has been devised. The accuracy, robustness and suitability of the new device was demonstrated by the excellent matching of the predicted and the in vivo results up to SPF 70, for four standard samples analyzed in blind. These results strongly suggest that our device can be useful for routine SPF evaluation in laboratories devoted to the development or production of cosmetic formulations, since the conventional in vitro methods tend to exhibit unacceptably high errors above SPF similar to 30 and the conventional in vivo methods tend to be expensive and exceedingly time consuming. (C) 2011 Elsevier B.V. All rights reserved.

Ensaio clínico duplo-cego controlado e randômico, comparando a eficácia da Clofazimina com a Cloroquina, no tratamento das lesões cutâneas do Lúpus Eritematoso Sistêmico

PURPOSE: To evaluate the capacity of clofazimine (CFZ) to control cutaneous activity of systemic lupus erythematosus (SLE), compared with chloroquine diphosphate (CDP). METHODS: A prospective, randomized, controlled, double blind clinical trial was carried out in thirty-three patients with SLE and cutaneous lesions (malar rash and/or discoid lupus and/or subacute cutaneous lupus), after approval by the respective Ethics Committee. Sixteen patients received clofazimine - 100mg/day (CFZ group) and 17 received chloroquine diphosphate - 250mg/day (CDP group), during six months. Both groups applied broad-spectrum sunscreens twice a day. The dose of prednisone was kept stable during the study. Cutaneous lesions were evaluated by 2 blinded observers and photographed at baseline and at months 1, 2, 4 and 6. RESULTS: Thirty-three patients began and 27 completed the 6 months of treatment. The groups were homogeneous and comparable in terms of demographic and clinical characteristics. Five CFZ-patients and one CDP-patients dropped out due to severe flare of disease requiring other treatment. At the end of the study, 12 CFZ-patients (75%) and 14 CDP-patients (82,4%) presented complete or near-complete remission of skin lesions; intention-to-treat analysis showed no significant difference in the response rates between groups. Side effects in both groups were frequent, but patients didn t have to discontinue the drugs. CONCLUSIONS: Clofazimine and chloroquine were effective in controlling cutaneous lesions in SLE patients