Quality of performance of the operation of sugarcane mechanized planting in day and night shifts

The sugarcane mechanized planting is becoming increasingly widespread in Brazil due to a higher operability and better working conditions offered to workers compared to other types of planting. Studies related to this topic are insufficient or scarce in Brazil. In this context, the aim of this study was to evaluate the operation quality of sugarcane mechanized planting in two operation shifts, by means of statistical process control. The mechanized planting was held on March 2012 and statistical design was completely randomized with two treatments, totaling 40 replications for the day shift and 40 replications for the night shift. The variables evaluated were: speed, engine rotation, engine oil pressure, water temperature of the engine, effective field capacity and the time consumption hourly and effective fuel. The use of statistical control charts showed that random intrinsic do not cause this process. The tractor alignment error showed outliers in the day and night shifts operations, indicating a possible delay in receiving the signal. The water temperature of the engine and the effective fuel consumption showed lower variability in nighttime operation with average values of 81°C and 22.66 L ha-1, respectively. The hourly fuel consumption had greater variability and consequently lower quality during the night of the operation, with an average consumption of 25.46 L h-1 while the day shift showed 26.86 L h-1.

Qualidade da operação de plantio mecanizado de cana-de-açúcar em sistema meiosi

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Economic analysis for sizing of sugarcane (Saccharum spp.) mechanized harvesting

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tratamento de toletes de cana-de-açúcar para o controle da podridão-abacaxi em pulverização conjugada ao plantio mecanizado

No plantio mecanizado da cana-de-açúcar, há dificuldades em se proteger a cultura contra pragas e doenças do solo, requerendo uma tecnologia de aplicação de produtos fitossanitários que respeite o ambiente e os custos de produção. O objetivo deste trabalho foi avaliar um sistema de pulverização para controle de doenças e pragas do solo, conjugado ao equipamento de plantio mecanizado de toletes de cana-de-açúcar, tomando como alvo-indicador a podridão-abacaxi. Delineou-se o experimento em blocos ao acaso, em área de plantio comercial da variedade SP-891115. A pulverização deu-se na região da calha do equipamento de plantio, por onde os toletes deslizam até o solo. Avaliaram-se o número de perfilhos brotados e a produção da cultura. Os resultados foram comparados pelo número e percentagem de perfilhos e pelo acréscimo na produção em relação à testemunha não-tratada. Com base nos resultados observados, concluiu-se que o sistema de pulverização de produtos fitossanitários conjugado ao plantio mecanizado proporcionou a recuperação da produtividade na cultura da cana-de-açúcar de até 15%, na maior dose utilizada para o controle da podridão-abacaxi, demonstrando ser promissor para o tratamento de toletes e visando à proteção contra doenças e pragas de solo.

Qualidade de sistemas de plantio em cultivares de cana-de-açúcar

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Controle de qualidade no plantio de cana-de-açúcar

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Qualidade da operação de plantio mecanizado de cana-de-açúcar nos turnos diurno e noturno

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Magnetic susceptibility in the prediction of soil attributes in two sugarcane harvesting management systems

This study aimed to investigate the potential use of magnetic susceptibility (MS) as pedotransfer function to predict soil attributes under two sugarcane harvesting management systems. For each area of 1 ha (one with green sugarcane mechanized harvesting and other one with burnt sugarcane manual harvesting), 126 soil samples were collected and subjected to laboratory analysis to determine soil physical, chemical and mineralogical attributes and for measuring of MS. Data were submitted to descriptive statistics by calculating the mean and coefficient of variation. In order to compare the means in the different harvesting management systems it was carried out the Tukey test at a significance level of 5%. In order to investigate the correlation of the MS with other soil properties it was made the correlation test and aiming to assess how the MS contributes to the prediction of soil complex attributes it was made the multiple linear regressions. The results demonstrate that MS showed, in both sugarcane harvesting management systems, statistical correlation with chemical, physical and mineralogical soil attributes and it also showed potential to be used as pedotransfer function to predict attributes of the studied oxisol.

Emergência de plantas daninhas em função da posição da semente e quantidade de palha de cana-de- açúcar

This work was carried out to evaluate the effects of sugarcane straw density and positions of seeds of Euphorbia heterophylla, Mucuna cinereum, Digitaria nuda and Eleusine indica on emergence and initial development of plants. The experiment were arranged in a completely randomized design, with 15 treatments and four replications, in a factorial arrangement 3 x 5 with a additional control; the first factor was constituted by position of seeds related to the straw (under, between and on) and the second by five quantities of straw (1, 2, 4, 8 e 16 t ha -1) with a control without straw. At 15 days after sowing (DAS) it was realized evaluations of height, dry mass and emergence percentage for E. heterophylla and M. cinereum, and at 28 DAS it was analyzed dry mass and emergence percentage for D nuda e E. indica. Data obtained were submitted to F in variance analysis test and means were compared with Tukey at 5% probability. Emergence and initial development of E. heterophylla e M. cinereum were reduced with increasing of straw and were affected by seed position, but it was not inhibited in none of conditions, indicating aggressiveness of these weeds in sugarcane mechanized harvest conditions. D. nuda and E. indica emergence was not affected by seed position and coverage soil with 8 e 16 t ha -1 of sugarcane straw inhibited its emergence.

Custos energéticos e econômicos do agroecossistema milho em consórcio com pinhão-manso

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Efeito do preparo do solo e resíduo da colheita de cana-de-açúcar sobre a emissão de CO2

The soil is one of the main C pools in terrestrial ecosystem, capable of storing significant C amounts. Therefore, understanding the factors that contribute to the loss of CO2 from agricultural soils is critical to determine strategies reducing emissions of this gas and help mitigate the greenhouse effect. The purpose of this study was to investigate the effect of soil tillage and sugarcane trash on CO2 emissions, temperature and soil moisture during sugarcane (re)planting, over a study period of 15 days. The following managements were evaluated: no-tillage with crop residues left on the soil surface (NTR); without tillage and without residue (NTNR) and tillage with no residue (TNR). The average soil CO2 emission (FCO2) was lowest in NTR (2.16 µmol m-2 s-1), compared to the managements NTNR (2.90 µmol m-2 s-1) and TNR (3.22 µmol m-2 s-1), indicating that the higher moisture and lower soil temperature variations observed in NTR were responsible for this decrease. During the study period, the lowest daily average FCO2 was recorded in NTR (1.28 µmol m-2 s-1), and the highest in TNR (6.08 µmol m-2 s-1), after rainfall. A loss of soil CO2 was lowest from the management NTR (367 kg ha-1 of CO2-C) and differing significantly (p<0.05) from the managements NTNR (502 kg ha-1 of CO2-C) and TNR (535 kg ha-1 of CO2-C). Soil moisture was the variable that differed most managements and was positively correlated (r = 0.55, p<0.05) with the temporal variations of CO2 emission from NTR and TNR. In addition, the soil temperature differed (p<0.05) only in management NTR (24 °C) compared to NTNR (26 °C) and TNR (26.5 °C), suggesting that under the conditions of this study, sugarcane trash left on the surface induced an average rise in the of soil temperature of 2 ºC.

Desgaste das facas do corte basal na qualidade da colheita mecanizada de cana-de-açúcar

During the sugarcane mechanized harvester process, the wear of base cutting knives is directly correlated to the quality of the cut made by the machines, and the use of quality control tools important in monitoring this process. Thus, the present study in Ribeirão Preto region aimed to assess the knives cut baseline and damage caused to wear brass knuckles in mechanized harvesting of cane raw sugar, from the viewpoint of statistical quality control (SQC). The wear of the knives was quantified by mass loss and its dimensions, while cutting quality was assessed by cutting height and damage to stumps visually classified according to the level of damage caused. The results showed that the wear of the knives was more pronounced in certain periods of use, but still within control standards. The cutting height was not affected by the wear of the knives, keeping within the limits of desirable quality for operation. Eventually damage the stumps ranged among themselves depending on each face of the cutting knives evaluated, and the predominance of certain classes of damage in each cutting face, but always remained in statistical control.

Utilização da programação por metas e análise por envoltória de dados para seleção de variedades de cana de açúcar para plantio em uma usina sucroalcooleira

Organizational change is occurring in the Brazilian agribusiness from sugar cane in recent decades. Aspects of management in this sector are being changed due to the importance of its products, especially ethanol and electricity. It is observed in the literature a lack of quantitative studies in this Brazilian sector, particularly the selection of sugarcane varieties for planting. This study proposes the use of Goal Programming (GP) with Data Envelopment Analysis (DEA) to select efficient varieties of sugarcane for planting in a sugar and ethanol milling company. The study allowed the identification of efficient sugarcane varieties. This way, it helped the company to make more reliable decisions, favoring the increase of productivity

Row spacing and planting density effects on the growth and yield of sugarcane. 1. Responses in fumigated and non-fumigated soil.

It has been reported that high-density planting of sugarcane can improve cane and sugar yield through promoting rapid canopy closure and increasing radiation interception earlier in crop growth. It is widely known that the control of adverse soil biota through fumigation (removes soil biological constraints and improves soil health) can improve cane and sugar yield. Whether the responses to high-density planting and improved soil health are additive or interactive has important implications for the sugarcane production system. Field experiments established at Bundaberg and Mackay, Queensland, Australia, involved all combinations of 2-row spacings (0.5 and 1.5 m), two planting densities (27 000 and 81 000 two-eyed setts/ha), and two soil fumigation treatments (fumigated and non-fumigated). The Bundaberg experiment had two cultivars (Q124, Q155), was fully irrigated, and harvested 15 months after planting. The Mackay experiment had one cultivar (Q117), was grown under rainfed conditions, and harvested 10 months after planting. High-density planting (81 000 setts/ha in 0.5-m rows) did not produce any more cane or sugar yield at harvest than low-density planting (27 000 setts/ha in 1.5-m rows) regardless of location, crop duration (15 v. 10 months), water supply (irrigated v. rainfed), or soil health (fumigated v. non-fumigated). Conversely, soil fumigation generally increased cane and sugar yields regardless of site, row spacing, and planting density. In the Bundaberg experiment there was a large fumigation x cultivar x density interaction (P<0.01). Cultivar Q155 responded positively to higher planting density in non-fumigated soil but not in fumigated soil, while Q124 showed a negative response to higher planting density in non-fumigated soil but no response in fumigated soil. In the Mackay experiment, Q117 showed a non-significant trend of increasing yield in response to increasing planting density in non-fumigated soil, similar to the Q155 response in non-fumigated soil at Bundaberg. The similarity in yield across the range of row spacings and planting densities within experiments was largely due to compensation between stalk number and stalk weight, particularly when fumigation was used to address soil health. Further, the different cultivars (Q124 and Q155 at Bundaberg and Q117 at Mackay) exhibited differing physiological responses to the fumigation, row spacing, and planting density treatments. These included the rate of tiller initiation and subsequent loss, changes in stalk weight, and propensity to lodging. These responses suggest that there may be potential for selecting cultivars suited to different planting configurations.

Row spacing and planting density effects on the growth and yield of sugarcane. 3. Responses with different cultivars.

The promotion of controlled traffic (matching wheel and row spacing) in the Australian sugar industry is necessitating a widening of row spacing beyond the standard 1.5 m. As all cultivars grown in the Australian industry have been selected under the standard row spacing there are concerns that at least some cultivars may not be suitable for wider rows. To address this issue, experiments were established in northern and southern Queensland in which cultivars, with different growth characteristics, recommended for each region, were grown under a range of different row configurations. In the northern Queensland experiment at Gordonvale, cultivars Q187((sic)), Q200((sic)), Q201((sic)), and Q218((sic)) were grown in 1.5-m single rows, 1.8-m single rows, 1.8-m dual rows (50 cm between duals), and 2.3-m dual rows (80 cm between duals). In the southern Queensland experiment at Farnsfield, cvv. Q138, Q205((sic)), Q222((sic)) and Q188((sic)) were also grown in 1.5-m single rows, 1.8-m single rows, 1.8-m dual rows (50 cm between duals), while 1.8-m-wide throat planted single row and 2.0-m dual row (80 cm between duals) configurations were also included. There was no difference in yield between the different row configurations at Farnsfield but there was a significant row configuration x cultivar interaction at Gordonvale due to good yields in 1.8-m single and dual rows with Q201((sic)) and poor yields with Q200((sic)) at the same row spacings. There was no significant difference between the two cultivars in 1.5-m single and 2.3-m dual rows. The experiments once again demonstrated the compensatory capacity that exists in sugarcane to manipulate stalk number and individual stalk weight as a means of producing similar yields across a range of row configurations and planting densities. There was evidence of different growth patterns between cultivars in response to different row configurations (viz. propensity to tiller, susceptibility to lodging, ability to compensate between stalk number and stalk weight), suggesting that there may be genetic differences in response to row configuration. It is argued that there is a need to evaluate potential cultivars under a wider range of row configurations than the standard 1.5-m single rows. Cultivars that perform well in row configurations ranging from 1.8 to 2.0 m are essential if the adverse effects of soil compaction are to be managed through the adoption of controlled traffic.