How does commuting behavior change due to incentives? An empirical study of the Beijing Subway System

This study examines the impact of incentives on commuters' travel behavior based upon a questionnaire survey conducted with respect to the Beijing Subway System. Overall, we find that offering incentives to commuters, particularly fast food restaurant-related services and reduced ticket fares, has a positive influence on avoiding the morning rush hour. Furthermore, by using an interaction analysis, we discover that a flexible work schedule has an impact on commuters' behavior and the efficiency of the subway system. Finally, we recommend two possible policies to maximize the utility of the subway system and to reduce congestion at the peak of morning service: (1) a set of incentives that includes free wireless internet service with a coupon for breakfast and a discount on ticket fares before the morning peak, and; (2) the introduction of a flexible work schedule.

Latin American Metro and Subway Association (ALAMYS): a 15-year record of serving the citizenry

This issue of the Bulletin introduces the reader to the Latin American Metro and Subway Association (ALAMYS), which throughout its 15-year history has supported a variety of initiatives aimed at improving the quality of services provided by urban mass transit railway systems.At its most recent general assembly, held in Madrid, Spain, in December 2000, ALAMYS set up several technical committees to improve its operational efficiency so that it can progress as an organization and achieve its goals.This article was written by Aurelio Rojo Garrido, arojo@mail.metromadrid.es, current secretary general of ALAMYS and operations manager of Metro de Madrid, S.A.

GPR applied to mapping utilities along the route of the Line 4 (yellow) subway tunnel construction in Sao Paulo City, Brazil

The rapid industrial development and disorganized population growth in huge cities bring about various urban problems due to intense use of physical space on and below the surface. Subsurface problems in metropolitan areas are caused by subway line construction, which often follows the routes of utility networks, such as electric and telephone cables, water and gas pipes, storm sewers, etc. Usually, the main problems are related to damage or destruction of preexisting utilities, often putting human lives at risk. With the purpose of minimizing risks. GPR-profiling with 200 MHz antennae was done at two sites, both located in downtown Sao Paulo, Brazil. The objectives of this work were to map utilities or existing infrastructure in the subsurface in order to orient the construction of the Line 4 (yellow) subway tunnel in Sao Paulo. GPR profiles can detect water pipes, utility networks in the subsurface, and concrete foundation columns or pilings in subsoil up to 2 m depth. In addition. the GPR profiles also provided details of the target shapes in the subsurface. GPR interpretations combined with lithological information from boreholes and trenches opened in the study areas were extremely important in mapping of the correct spatial distribution of buried utilities at these two sites in Sao Paulo. This information improves and updates maps of utility placement, serves as a basis for planning of the geotechnical excavation of the Line 4 (yellow) subway tunnel in Sao Paulo, helps minimize problems related to destruction of preexisting utilities in the subsoil, and avoids risk of dangerous accidents. (C) 2012 Elsevier B.V. All rights reserved.

Design and Test of a High QoS Radio Network for CBTC Systems in Subway Tunnels

Communications Based Train Control Systems require high quality radio data communications for train signaling and control. Actually most of these systems use 2.4GHz band with proprietary radio transceivers and leaky feeder as distribution system. All them demand a high QoS radio network to improve the efficiency of railway networks. We present narrow band, broad band and data correlated measurements taken in Madrid underground with a transmission system at 2.4 GHz in a test network of 2 km length in subway tunnels. The architecture proposed has a strong overlap in between cells to improve reliability and QoS. The radio planning of the network is carefully described and modeled with narrow band and broadband measurements and statistics. The result is a network with 99.7% of packets transmitted correctly and average propagation delay of 20ms. These results fulfill the specifications QoS of CBTC systems.

Broadband Channel Long Delay Cluster Measurements and Analysis at 2.4GHz in Subway Tunnels

The delay caused by the reflected ray in broadband communication has a great influence on the communications in subway tunnel. This paper presents measurements taken in subway tunnels at 2.4 GHz, with 5 MHz bandwidth. According to propagation characteristics of tunnel, the measurements were carried out with a frequency domain channel sounding technique, in three typical scenarios: line of sight (LOS), Non-line-of-sight (NLOS) and far line of sight (FLOS), which lead to different delay distributions. Firstly IFFT was chosen to get channel impulse response (CIR) h(t) from measured three-dimensional transfer functions. Power delay profile (PDP) was investigated to give an overview of broadband channel model. Thereafter, a long delay caused by the obturation of tunnel is observed and investigated in all the scenarios. The measurements show that the reflection can be greatly remained by the tunnel, which leads to long delay cluster where the reflection, but direct ray, makes the main contribution for radio wave propagation. Four important parameters: distribution of whole PDP power, first peak arriving time, reflection cluster duration and PDP power distribution of reflection cluster were studied to give a detailed description of long delay characteristic in tunnel. This can be used to ensure high capacity communication in tunnels

Measurement of Distributed Antenna Systems at 2.4 GHz in a Realistic Subway Tunnel Environment.

Accurate characterization of the radio channel in tunnels is of great importance for new signaling and train control communications systems. To model this environment, measurements have been taken at 2.4 GHz in a real environment in Madrid subway. The measurements were carried out with four base station transmitters installed in a 2-km tunnel and using a mobile receiver installed on a standard train. First, with an optimum antenna configuration, all the propagation characteristics of a complex subway environment, including near shadowing, path loss,shadow fading, fast fading, level crossing rate (LCR), and average fade duration (AFD), have been measured and computed. Thereafter, comparisons of propagation characteristics in a double-track tunnel (9.8-m width) and a single-track tunnel (4.8-m width) have been made. Finally, all the measurement results have been shown in a complete table for accurate statistical modeling.

Measurements and modelling of radio propagation in subway tunnels

The work presented in this article is focused on the RF measurement campaign carried out in several subway tunnels in Metro Madrid (Spain). Most common segments such as straight lines, curves and passing through station as well as other unique scenarios in metropolitan lines were the selected locations during this campaign. Measurements were conducted in tunnels of diverse cross section shapes and taken at three frequency bands: 900 MHz, 2.4GHz and 5.7 GHz for both horizontal and vertical polarization.

Cambridge Main St. Subway, walls and well found in 1910 while excavating for Harvard Sq. station, blueprint, 1912

Contains blueprint from the Boston Elevated Railway's construction of subway lines underneath Harvard Square. Indicates area of Harvard Yard where construction crews discovered stones likely from the foundation of Goffe College.

Cambridge Main St. Subway, walls and well found in 1910 while excavating for Harvard Sq. station, 1912, with Letter from Edward Dana to S.E. Morison, 15 March 1934

Second copy of the previous blueprint. Also includes a 1934 letter from Edward Dana of the Boston Elevated Railway Public Trustees to Samuel Eliot Morison, Editor of The Tercentennial History of Harvard University responding to Morison's request for additional information about discovery of early Harvard building foundations during the subway construction excavation in Harvard Square.

Clipping from The Harvard Bulletin, on discovery of southeast corner of original Harvard College building during subway excavations, 1910.

Contains prints of floor plans of Harvard College used for publication by Samuel E. Morison.

New York, N.Y., subway and elevated railroad map, 1918 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Map showing routes & stations on the dual system October, 1918. It was published by State of New York Public Service Commission for the First District in 1918. Scale [ca. 1:46,000]. Covers Manhattan, Queens, Brooklyn, and Bronx, New York, N.Y. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Universal Transverse Mercator (UTM) Zone 18N NAD83 projection. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as subway and elevated railroad lines and stations, drainage, and more. Includes inset: Sub Plan. Includes legend and key. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Boston, Massachusetts, proposed subway route, 1895 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Plan showing proposed route of subway, by the Boston Transit Commission. It was published by Geo. H. Walker & Co. in Feb. 1895. Scale [ca. 1:2,400]. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Massachusetts State Plane Coordinate System, Mainland Zone (in Feet) (Fipszone 2001). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows proposed subway route and stations from Causeway St. along Tremont St. to Boylston St., Boston, Massachusetts. It shows also features such as streets, station platforms, surface level and subterranean tracks, and more. This layer is part of a selection of digitally scanned and georeferenced historic maps of Massachusetts from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of regions, originators, ground condition dates (1755-1922), scales, and purposes. The digitized selection includes maps of: the state, Massachusetts counties, town surveys, coastal features, real property, parks, cemeteries, railroads, roads, public works projects, etc.

Report on Detroit street railway traffic and proposed subway, made to board of Street Railway commissioners, city of Detroit.

Mode of access: Internet.