La Teoría General del Derecho como asignatura necesaria en el plan de estudios de la carrera de abogacía

Las ramas jurídicas son estudiadas por el estudiante de Abogacía en asignaturas separadas a lo largo de la carrera. Ahora bien, es necesaria una asignatura al final de la misma que reúna a todas las ramas del Derecho estudiadas separadamente. Es decir, una visión de síntesis de todas las ramas del mundo jurídico. Esa asignatura necesaria es la Teoría General del Derecho. La misma aporta la noción de “unidad” del fenómeno jurídico, es decir, la comprensión del Derecho como “sistema jurídico”. Permite al estudiante avanzado la reflexión superadora de las particularidades de cada rama del Derecho y el enfoque de lo “común” y lo “abarcativo” de todo el fenómeno jurídico. La asignatura debe constituirse en el camino para que el alumno avanzado de Derecho logre autónomamente la comprensión y reflexión de: la noción de unidad del Derecho, la finalidad del Derecho, la idea de cambio en el Derecho, la noción de complejidad pura del Derecho, la noción de rama jurídica, la noción de autonomía de las ramas, la crisis de las respuestas que brindan las ramas jurídicas tradicionales, y el replanteo sobre la necesidad de surgimiento de nuevas ramas jurídicas.

Florida International University College of Medicine 1st Accreditation Planning Weekend, Feb 16-18 2007 – Basic Medical Sciences: Needed Subject Areas & Faculty Expertise

Chart outlining areas of need for subject areas and faculty expertise.

Minimizing the Number of Optical Amplifiers Needed to Support a Multi-Wavelength Optical LAN/MAN

Optical networks based on passive star couplers and employing wavelength-division multiplexing (WDhf) have been proposed for deployment in local and metropolitan areas. Amplifiers are required in such networks to compensate for the power losses due to splitting and attenuation. However, an optical amplifier has constraints on the maximum gain and the maximum output power it can supply; thus optical amplifier placement becomes a challenging problem. The general problem of minimizing the total amplifier count, subject to the device constraints, is a mixed-integer non-linear problem. Previous studies have attacked the amplifier placement problem by adding the “artificial” constraint that all wavelengths, which are present at a particular point in a fiber, be at the same power level. In this paper, we present a method to solve the minimum amplifier- placement problem while avoiding the equally powered- wavelength constraint. We demonstrate that, by allowing signals to operate at different power levels, our method can reduce the number of amplifiers required in several small to medium-sized networks.

Hybrid Contribution of JPEG200 Video Files for Professional Production Centers Reliability and Non-Reliability Transmission File Based in Image Quality Needed

ATM, SDH or satellite have been used in the last century as the contribution network of Broadcasters. However the attractive price of IP networks is changing the infrastructure of these networks in the last decade. Nowadays, IP networks are widely used, but their characteristics do not offer the level of performance required to carry high quality video under certain circumstances. Data transmission is always subject to errors on line. In the case of streaming, correction is attempted at destination, while on transfer of files, retransmissions of information are conducted and a reliable copy of the file is obtained. In the latter case, reception time is penalized because of the low priority this type of traffic on the networks usually has. While in streaming, image quality is adapted to line speed, and line errors result in a decrease of quality at destination, in the file copy the difference between coding speed vs line speed and errors in transmission are reflected in an increase of transmission time. The way news or audiovisual programs are transferred from a remote office to the production centre depends on the time window and the type of line available; in many cases, it must be done in real time (streaming), with the resulting image degradation. The main purpose of this work is the workflow optimization and the image quality maximization, for that reason a transmission model for multimedia files adapted to JPEG2000, is described based on the combination of advantages of file transmission and those of streaming transmission, putting aside the disadvantages that these models have. The method is based on two patents and consists of the safe transfer of the headers and data considered to be vital for reproduction. Aside, the rest of the data is sent by streaming, being able to carry out recuperation operations and error concealment. Using this model, image quality is maximized according to the time window. In this paper, we will first give a briefest overview of the broadcasters requirements and the solutions with IP networks. We will then focus on a different solution for video file transfer. We will take the example of a broadcast center with mobile units (unidirectional video link) and regional headends (bidirectional link), and we will also present a video file transfer file method that satisfies the broadcaster requirements.

A methodology to calibrate structural finite element models for reinforced concrete structures subject to blast loads

Civil buildings are not specifically designed to support blast loads, but it is important to take into account these potential scenarios because of their catastrophic effects, on persons and structures. A practical way to consider explosions on reinforced concrete structures is necessary. With this objective we propose a methodology to evaluate blast loads on large concrete buildings, using LS-DYNA code for calculation, with Lagrangian finite elements and explicit time integration. The methodology has three steps. First, individual structural elements of the building like columns and slabs are studied, using continuum 3D elements models subjected to blast loads. In these models reinforced concrete is represented with high precision, using advanced material models such as CSCM_CONCRETE model, and segregated rebars constrained within the continuum mesh. Regrettably this approach cannot be used for large structures because of its excessive computational cost. Second, models based on structural elements are developed, using shells and beam elements. In these models concrete is represented using CONCRETE_EC2 model and segregated rebars with offset formulation, being calibrated with continuum elements models from step one to obtain the same structural response: displacement, velocity, acceleration, damage and erosion. Third, models basedon structural elements are used to develop large models of complete buildings. They are used to study the global response of buildings subjected to blast loads and progressive collapse. This article carries out different techniques needed to calibrate properly the models based on structural elements, using shells and beam elements, in order to provide results of sufficient accuracy that can be used with moderate computational cost.

Better targeting of federal funds needed to eliminate unsafe bridges. Comptroller General's report to the Honorable James R. Sasser, United States Senate.

Mode of access: Internet.

User guide for removal of not needed traffic signals.

Federal Highway Administration, Washington, D.C.

Public and private coordination needed if auto repair problems are to be reduced.

Mode of access: Internet.

More information is needed on the advantages and limitations of animal experimentation before deciding whether legislation is needed for research funds.

Mode of access: Internet.

Promising changes improve EPA's extramural research; more changes needed. Report by the Comptroller General of the United States.

Mode of access: Internet.

Improving and maintaining federal-aid roads--Department of Transportation action needed.

Mode of access: Internet.

Gray market vehicle program: extension warranted, but improvements in vehicle identification are needed.

Mode of access: Internet.

Highway user fees: updated data needed to determine whether all users pay their fair share.

Mode of access: Internet.

Actions needed to increase bicycle/moped use in the federal community. Report by the Comptroller General of the United States.

Mode of access: Internet.

Transportation infrastructure: better tools needed for making decisions on using ISTEA funds flexibly.

Mode of access: Internet.