Sobrevivência: jogo interactivo para estudo de arquitecturas de agentes autónomos

Trabalho de projeto para obtenção do grau de Mestre em Engenharia Informática e de Computadores

WIFI indoor positioning for mobile devices, an application for the UJI Smart Campus

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Reclamações dos utentes : estudo dos resultados e medidas correctivas no contexto dos Agrupamentos de Centros de Saúde de Lisboa e Vale do Tejo

RESUMO - A qualidade dos cuidados de saúde, evolui ao longo dos tempos e é agora considerada um direito e um pilar fundamental nos serviços de saúde. As reclamações dos utentes podem revelar informação acerca das experiências entre os utentes e as organizações de saúde. Desta forma as reclamações podem ser consideradas como indicadores de qualidade que permitem identificar áreas e/ou oportunidades de melhoria, e de grande representatividade no processo da melhoria contínua da qualidade na saúde. Sendo fundamental dar voz aos utentes do SNS e possibilitar a sua participação activa no processo de melhoria da prestação dos cuidados de saúde, com este trabalho pretendeu-se estudar a forma como as reclamações dos utentes nos ACES na Região de Saúde de Lisboa e Vale do Tejo, contribuem para a melhoria da qualidade nos referidos serviços de saúde. Foram reconhecidas e analisadas as principais causas de reclamação, as correspondentes medidas correctivas e as necessidades e/ou dificuldades no seu processo de implementação, bem como a respectiva avaliação dos resultados obtidos e identificação das recomendações dos Coordenadores dos Gabinetes do Utente no âmbito dos ACES da Região de Saúde de LVT. Efectuou-se a análise de revisão bibliográfica e a consulta dos dados, desagregados, das causas mais mencionadas nas reclamações no âmbito do estudo e foram realizados contactos informais com a estrutura regional e nacional do Sistema SIM-Cidadão. Foram aplicados 15 questionários aos Coordenadores Locais dos Gabinetes do Cidadão dos ACES da ARSLVT, apresentando a investigação um carácter exploratório e qualitativo. Os questionários, foram enviados e recebidos anonimamente através da plataforma para estudos estatísticos Survey Monkey. A sua análise e interpretação, foi efectuada de forma a organizar os seus dados de uma forma sistematizada e permitir categorizar a informação para permitir a sua análise. Os resultados evidenciaram que as reclamações dos utentes apresentadas nos Gabinetes do Cidadão, de certa forma, foram um contributo para o processo da melhoria da qualidade nos ACES da Região de Saúde de Lisboa e Vale do Tejo através do adopção de medidas e acções correctivas, ultrapassando algumas limitações devida à criação de estratégias locais. No entanto foi evidente que algumas limitações não foram passiveis de ser ultrapassadas, pois envolvem decisões do âmbito externo aos ACES. Os resultados alcançados e as recomendações dos Coordenadores, podem evidenciar algumas mudanças organizacionais, mas transparecem a ideia de que existe ainda um longo caminho a percorrer.

Akzeptanz und Motivation beim selbstregulierten Lernen unter Einsatz von neuen Medien in der berufsbegleitenden Weiterbildung

Das Ziel der Dissertation war die Untersuchung des Computereinsatzes zur Lern- und Betreuungsunterstützung beim selbstgesteuerten Lernen in der Weiterbildung. In einem bisher konventionell durchgeführten Selbstlernkurs eines berufsbegleitenden Studiengangs, der an das Datenmanagement der Bürodatenverarbeitung heranführt, wurden die Kursunterlagen digitalisiert, die Betreuung auf eine online-basierte Lernbegleitung umgestellt und ein auf die neuen Lernmedien abgestimmtes Lernkonzept entwickelt. Dieses neue Lernkonzept wurde hinsichtlich der Motivation und der Akzeptanz von digitalen Lernmedien evaluiert. Die Evaluation bestand aus zwei Teilen: 1. eine formative, den Entwicklungsprozess begleitende Evaluation zur Optimierung der entwickelten Lernsoftware und des eingeführten Lernkonzeptes, 2. eine sowohl qualitative wie quantitative summative Evaluation der Entwicklungen. Ein zentraler Aspekt der Untersuchung war die freie Wahl der Lernmedien (multimediale Lernsoftware oder konventionelles Begleitbuch) und der Kommunikationsmedien (online-basierte Lernplattform oder die bisher genutzten Kommunikationskanäle: E-Mail, Telefon und Präsenztreffen). Diese Zweigleisigkeit erlaubte eine differenzierte Gegenüberstellung von konventionellen und innovativen Lernarrangements. Die Verbindung von qualitativen und quantitativen Vorgehensweisen, auf Grund derer die subjektiven Einstellungen der Probanden in das Zentrum der Betrachtung rückten, ließen einen Blickwinkel auf den Nutzen und die Wirkung der Neuen Medien in Lernprozessen zu, der es erlaubte einige in der Literatur als gängig angesehene Interpretationen in Frage zu stellen und neu zu diskutieren. So konnten durch eine Kategorisierung des Teilnehmerverhaltens nach online-typisch und nicht online-typisch die Ursache-Wirkungs-Beziehungen der in vielen Untersuchungen angeführten Störungen in Online-Seminaren verdeutlicht werden. In den untersuchten Kursen zeigte sich beispielsweise keine Abhängigkeit der Drop-out-Quote von den Lern- und Betreuungsformen und dass diese Quote mit dem neuen Lernkonzept nur geringfügig beeinflusst werden konnte. Die freie Wahl der Lernmedien führte zu einer gezielten Nutzung der multimedialen Lernsoftware, wodurch die Akzeptanz dieses Lernmedium stieg. Dagegen war die Akzeptanz der Lernenden gegenüber der Lernbegleitung mittels einer Online-Lernplattform von hoch bis sehr niedrig breit gestreut. Unabhängig davon reichte in allen Kursdurchgängen die Online-Betreuung nicht aus, so dass Präsenztreffen erbeten wurde. Hinsichtlich der Motivation war die Wirkung der digitalen Medien niedriger als erwartet. Insgesamt bieten die Ergebnisse Empfehlungen für die Planung und Durchführung von computerunterstützten, online-begleiteten Kursen.

The undergraduate level (1st study cycle) as a fundamental platform/standard for the development of Urban and Regional Planning in higher education programs

LUDA is a research project of Key Action 4 "City of Tomorrow & Cultural Heritage" of the programme "Energy, Environment and Sustainable Development" within the Fifth Framework Programme of the European Commission

Medicago truncatula as a platform for Molecular Farming: a study of the subcellular localization of a human recombinant protein!

Dissertation presented at Faculdade de Ciências e Tecnologia of Universidade Nova de Lisboa to obtain the Degree of Master in Biotecnology

Pervasive business intelligence platform to improve the quality of decision process in primary and secondary education – A Portuguese case study

Business Intelligence (BI) can be seen as a method that gathers information and data from information systems in order to help companies to be more accurate in their decision-making process. Traditionally BI systems were associated with the use of Data Warehouses (DW). The prime purpose of DW is to serve as a repository that stores all the relevant information required for making the correct decision. The necessity to integrate streaming data became crucial with the need to improve the efficiency and effectiveness of the decision process. In primary and secondary education, there is a lack of BI solutions. Due to the schools reality the main purpose of this study is to provide a Pervasive BI solution able to monitoring the schools and student data anywhere and anytime in real-time as well as disseminating the information through ubiquitous devices. The first task consisted in gathering data regarding the different choices made by the student since his enrolment in a certain school year until the end of it. Thereafter a dimensional model was developed in order to be possible building a BI platform. This paper presents the dimensional model, a set of pre-defined indicators, the Pervasive Business Intelligence characteristics and the prototype designed. The main contribution of this study was to offer to the schools a tool that could help them to make accurate decisions in real-time. Data dissemination was achieved through a localized application that can be accessed anywhere and anytime.

Viability study of a multiplex diagnostic platform for Chagas disease

A new multiplex assay platform was evaluated to detect Trypanosoma cruzi infection using the recombinant antigens CRA, FRA, CRAFRA fusion and parasite lysate. The antigens presented different sensitivity and specificity in a singleplex test when compared to a serial dilution of two pools comprising 10 positive serum samples and one pool of 10 negative samples. The recombinant protein CRA presented lower sensitivity (55%) in contrast to the 100% specificity and sensitivity of FRA, CRAFRA and T. cruzi lysate. These antigens also showed good results in a duplex test and the duplex test with CRAFRA/T. cruzi lysate showed better performance with 100% specificity and sensitivity, as well as a lower cut-off value in comparison to the other duplex test, FRA/T. cruzi lysate. Hence, when the antigens were used in duplex format, both tests showed decreased cut-off values and no interference between different bead sets, resulting in increasing sensitivity and specificity. The results of these multiplex tests show that they could be an alternative to singleplex detection for Chagas disease, and also indicate the necessity of using multiplex diagnostic tools to increase the sensitivity and specificity for diagnostic tests. Emerging data from the T. cruzi genome and from its ORFeome project will also allow the identification of new antigens for this disease detection application.

Endoluminal surgical triangulation: overcoming challenges of colonic endoscopic submucosal dissections using a novel flexible endoscopic surgical platform: feasibility study in a porcine model.

BACKGROUND: Colonic endoscopic submucosal dissection (ESD) is challenging as a result of the limited ability of conventional endoscopic instruments to achieve traction and exposure. The aim of this study was to evaluate the feasibility of colonic ESD in a porcine model using a novel endoscopic surgical platform, the Anubiscope (Karl Storz, Tüttlingen, Germany), equipped with two working channels for surgical instruments with four degrees of freedom offering surgical triangulation. METHODS: Nine ESDs were performed by a surgeon without any ESD experience in three swine, at 25, 15, and 10 cm above the anal verge with the Anubiscope. Sixteen ESDs were performed by an experienced endoscopist in five swine using conventional endoscopic instruments. Major ESD steps included the following for both groups: scoring the area, submucosal injection of glycerol, precut, and submucosal dissection. Outcomes measured were as follows: dissection time and speed, specimen size, en bloc dissection, and complications. RESULTS: No perforations occurred in the Anubis group, while there were eight perforations (50 %) in the conventional group (p = 0.02). Complete and en bloc dissections were achieved in all cases in the Anubis group. Mean dissection time for completed cases was statistically significantly shorter in the Anubis group (32.3 ± 16.1 vs. 55.87 ± 7.66 min; p = 0.0019). Mean specimen size was higher in the conventional group (1321 ± 230 vs. 927.77 ± 229.96 mm(2); p = 0.003), but mean dissection speed was similar (35.95 ± 18.93 vs. 23.98 ± 5.02 mm(2)/min in the Anubis and conventional groups, respectively; p = 0.1). CONCLUSIONS: Colonic ESDs were feasible in pig models with the Anubiscope. This surgical endoscopic platform is promising for endoluminal surgical procedures such as ESD, as it is user-friendly, effective, and safe.

The undergraduate level (1st study cycle) as a fundamental platform/ standard for the development of Urban and Regional Planning in higher education programs

The ongoing reforms, which were introduced under the Bologna Process and have already been extended outside of Europe , are a unique opportunity for reinforcing and structuring a common platform of understanding among members, based on the full time undergraduate courses in ( Urbanismo) Urban and Regional Planning. The training programs at this 1st cycle level, will obviously continue with the 2nd and 3rd cycles (Bachelor's Degree, Master's Degree and PhD Degree or 3+2+3 years). The training programs at this full time 1st cycle level, can also becomes the framework of understanding for the development of research in the urban fields at national and international levels.

A simple and versatile 2-dimensional platform to study plant germination and growth under controlled humidity

We describe a simple, inexpensive, but remarkably versatile and controlled growth environment for the observation of plant germination and seedling root growth on a flat, horizontal surface over periods of weeks. The setup provides to each plant a controlled humidity (between 56% and 91% RH), and contact with both nutrients and atmosphere. The flat and horizontal geometry of the surface supporting the roots eliminates the gravitropic bias on their development and facilitates the imaging of the entire root system. Experiments can be setup under sterile conditions and then transferred to a non-sterile environment. The system can be assembled in 1-2 minutes, costs approximately 8.78$ per plant, is almost entirely reusable (0.43$ per experiment in disposables), and is easily scalable to a variety of plants. We demonstrate the performance of the system by germinating, growing, and imaging Wheat (Triticum aestivum), Corn (Zea mays), and Wisconsin Fast Plants (Brassica rapa). Germination rates were close to those expected for optimal conditions.

Bone Remodeling Adjacent to Morse Cone-Connection Implants with Platform Switch: A Fluorescence Study in the Dog Mandible

Purpose: The aim of this study was to evaluate, through fluorescence analysis, the effect that different interimplant distances, after prosthetic restoration, will have on bone remodeling in submerged and nonsubmerged implants restored with a ""platform switch."" Materials and Methods: Fifty-six Ankylos implants were placed 1.5 mm subcrestally in seven dogs. The implants were placed so that two fixed prostheses, with three interimplant contacts separated by 1-mm, 2-mm, and 3-mm distances, could be fabricated for each side of the mandible. The sides and the positions of the groups were selected randomly. To better evaluate bone remodeling, calcein green was injected 3 days before placement of the prostheses at 12 weeks postimplantation. At 3 days before sacrifice (8 weeks postloading), alizarin red was injected. The amounts of remodeled bone within the different interimplant areas were compared statistically before and after loading in submerged and nonsubmerged implants. Results: Statistically significant differences existed in the percentage of remodeled bone seen in the different regions. Mean percentages of remodeled bone in the submerged and nonsubmerged groups, respectively, were as follows: for the 1-mm distance, 23.0% +/- 0.05% and 23.1% +/- 0.03% preloading and 27.0% +/- 0.03% and 25.2% +/- 0.04% postloading, for the 2-mm distance, 18.2% +/- 0.05% and 18.1% +/- 0.04% preloading and 21.3% +/- 0.07% and 19.9% +/- 0.03% postloading, for the 3-mm distance, 18.3% +/- 0.03% and 18.3% +/- 0.03% preloading and 18.8% +/- 0.04% and 19.8% +/- 0.04% postloading, for distal-extension regions, 16.6% +/- 0.02% and 17.4% +/- 0.04% preloading and 17.0% +/- 0.04% and 18.4% +/- 0.04% postloading. Conclusions: Based upon this animal study, loading increases bone formation for submerged or nonsubmerged implants, and the interimplant distance of 1 mm appears to result in more pronounced bone remodeling than the 2-mm or 3-mm distances in implants with a ""platform switch."" INT J ORAL MAXILLOFAC IMPLANTS 2009;24:257-266

Why join a carbon club?: a study of the banks participating in the Brazilian “Business for Climate Platform”

Why do firms that present low levels of (direct) carbon emissions participate in “carbon clubs”, which have the goal of managing and reducing greenhouse gas (GHG) emissions? In order to answer this question, we collected data from both primary and secondary sources from firms operating in the Brazilian banking sector, which are members of the Businesses for Climate Platform (Plataforma Empresas pelo Clima e EPC). We first looked for answers in the institutional theory and resource based view of the firm (RBV). By confronting the arguments presented by these streams of scientific enquiry with empirical data, we worked on theory testing. In particular, we analyzed the institutional pressures and resources and capabilities of the focus companies, in order to understand the rationales for proactive sustainability management. We found evidences of the arguments presented by both the institutional theory and the RBV. By studying an industry that is not a frequent subject to research on socio-environmental issues e for not being considered of high impact e in an emerging market economy, the research contributes to both the further development of the institutional theory and the advancement of sustainability management in corporations.

Stress Analysis in Platform-Switching Implants: A 3-Dimensional Finite Element Study

The aim of this study was to evaluate the influence of the platform-switching technique on stress distribution in implant, abutment, and pen-implant tissues, through a 3-dimensional finite element study. Three 3-dimensional mandibular models were fabricated using the Solid Works 2006 and InVesalius software. Each model was composed of a bone block with one implant 10 mm long and of different diameters (3.75 and 5.00 mm). The UCLA abutments also ranged in diameter from 5.00 mm to 4.1 mm. After obtaining the geometries, the models were transferred to the software FEMAP 10.0 for pre- and postprocessing of finite elements to generate the mesh, loading, and boundary conditions. A total load of 200 N was applied in axial (0 degrees), oblique (45 degrees), and lateral (90) directions. The models were solved by the software NeiNastran 9.0 and transferred to the software FEMAP 10.0 to obtain the results that were visualized through von Mises and maximum principal stress maps. Model A (implants with 3.75 mm/abutment with 4.1 mm) exhibited the highest area of stress concentration with all loadings (axial, oblique, and lateral) for the implant and the abutment. All models presented the stress areas at the abutment level and at the implant/abutment interface. Models B (implant with 5.0 mm/abutment with 5.0 mm) and C (implant with 5.0 mm/abutment with 4.1 mm) presented minor areas of stress concentration and similar distribution pattern. For the cortical bone, low stress concentration was observed in the pen-implant region for models B and C in comparison to model A. The trabecular bone exhibited low stress that was well distributed in models B and C. Model A presented the highest stress concentration. Model B exhibited better stress distribution. There was no significant difference between the large-diameter implants (models B and C).