Expedited Ethics Review Form for Student Projects

Form to be completed and discussed with your tutor for submission to the ethics committee as appropriate

Student projects: plagiarism and assessment

Within the Information Technology degree programme of the University of Reading, the students undertake a major project in their final year. The module is both a hurdle to an honours degree and significant in terms of assessment weighting. The two year history so far has shown that bad citation and plagiarism are issues, and in one case called for the due referral of a project report. In the light of experience to date, we are focusing firstly on plagiarism prevention, giving generic advice on report writing and citation practice, and secondly on detection. In the longer term, I believe we need to reflect on what capabilities we should be creating in our undergraduates and therefore what and how we should be assessing them.

Integrating Student Learning into the Repository Ecosystem

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Creating New Design-Build-Test Experiences as Outputs of Undergraduate Design-Build-Test Projects

This paper describes a methodology of using individual engineering undergraduate student projects as a means of effectively and efficiently developing new Design-Build-Test (DBT) learning experiences and challenges.
A key aspect of the rationale for this approach is that it benefits all parties. The student undertaking the individual project gets an authentic experience of producing a functional artefact, which has been the result of a design process that addresses conception, design, implementation and operation. The supervising faculty member benefits from live prototyping of new curriculum content and resources with a student who is at a similar level of knowledge and experience as the intended end users of the DBT outputs. The multiple students who ultimately undertake the DBT experiences / challenges benefit from the enhanced nature of a learning experience which has been “road tested” and optimised.
To demonstrate the methodology the paper will describe a case study example of an individual project completed in 2015. This resulted in a DBT design challenge with a theme of designing a catapult for throwing table tennis balls, the device being made from components laser cut from medium density fibreboard (MDF). Further three different modes of operation will be described which use the same resource materials but operate over different timescales and with different learning outcomes, from an icebreaker exercise focused on developing team dynamics through to full DBT where students get an opportunity to experience the full impact of their design decisions by competing against other students with a catapult they have designed and built themselves.

AN ANALYSIS OF SMALL BUSINESS LOAN GUARANTEE FUNDS

Small businesses are considered important engines for job growth and economic development by policy makers worldwide. One of the most commonly cited constraints of small businesses is a lack of access to capital. To address this constraint, small business loan guarantee programs have been established in over 100 countries. There are a variety of types of guarantee funds, with the most significant differences being which borrowers are eligible for guarantees, and how borrowers are approved for guarantees. There is currently no clear delineation between types of programs and the economic conditions they operate in, though some trends are becoming apparent. However, these trends may not be leading to the best economic outcomes possible. By better matching the structure of the guarantee fund to the economic conditions it operates in, the program’s success in meeting economic development goals may be greatly improved. Many programs in developing countries may not be taking advantage of bank expertise and may be limiting the scope of their effectiveness. At the same time, programs in developed countries may be wasting resources by scattering their efforts too thinly and subsidizing less competitive firms to the detriment of local economic development.

Regulating Green Buildings

Green buildings are becoming the new fixation for the building industry because of the impact they have on the carbon footprint and the cost savings they offer for utility costs. Governments have begun to produce policies and regulations that implement and mandate green buildings due to these successes. However, the policies are having troubles increasing the popularity and quantities of green buildings. There is a need for a way to produce better policies and regulations that will increase both the amount of green buildings their popularity. A decision-making tool, such as a decision tree, should be created to help policymakers who do not have the backgrounds to produce well thought out regulations. By researching the green building industry and its current status, key points can be graphed out in a decision tool that will provide the needed education for policy makers to produce better green building regulations.

A platform for real-time control education with LEGO MINDSTORMS.

A set of software development tools for building real-time control systems on a simple robotics platform is described in the paper. The tools are being used in a real-time systems course as a basis for student projects. The development platform is a low-cost PC running GNU/Linux, and the target system is LEGO MINDSTORMS NXT, thus keeping the cost of the laboratory low. Real-time control software is developed using a mixed paradigm. Functional code for control algorithms is automatically generated in C from Simulink models. This code is then integrated into a concurrent, real-time software architecture based on a set of components written in Ada. This approach enables the students to take advantage of the high-level, model-oriented features that Simulink oers for designing control algorithms, and the comprehensive support for concurrency and real-time constructs provided by Ada.

Practice based learning approaches in collaborative design and engineering education:a case study investigation into the benefits of a crossdisciplinary practice based learning strategy

This study explores the ongoing pedagogical development of a number of undergraduate design and engineering programmes in the United Kingdom. Observations and data have been collected over several cohorts to bring a valuable perspective to the approaches piloted across two similar university departments while trialling a number of innovative learning strategies. In addition to the concurrent institutional studies the work explores curriculum design that applies the principles of Co-Design, multidisciplinary and trans disciplinary learning, with both engineering and product design students working alongside each other through a practical problem solving learning approach known as the CDIO learning initiative (Conceive, Design Implement and Operate) [1]. The study builds on previous work presented at the 2010 EPDE conference: The Effect of Personality on the Design Team: Lessons from Industry for Design Education [2]. The subsequent work presented in this paper applies the findings to mixed design and engineering team based learning, building on the insight gained through a number of industrial process case studies carried out in current design practice. Developments in delivery also aligning the CDIO principles of learning through doing into a practice based, collaborative learning experience and include elements of the TRIZ creative problem solving technique [3]. The paper will outline case studies involving a number of mixed engineering and design student projects that highlight the CDIO principles, combined with an external industrial design brief. It will compare and contrast the learning experience with that of a KTP derived student project, to examine an industry based model for student projects. In addition key areas of best practice will be presented, and student work from each mode will be discussed at the conference.

The Effects of the Project Approach on Children in Inclusive Early Childhood Classrooms

Research on the impact of the Project Approach on young children with disabilities or children who are at-risk is limited. Mixed methods were used to study the impact of the Project Approach on the social interactions, challenging behaviors, and language development of eight focal children in two inclusive classrooms. Child participants were two children with IEPs and two children identified as at-risk from each class. Adult participants were six professionals who received high quality supports to implement the Project Approach. Adults were interviewed prior to the beginning of the study and again mid-, and post-implementation. Choice time observations were videotaped twice per week over 14 weeks to assess the impact of the Project Approach on play levels and MLUm. Results revealed that social interactions, challenging behaviors, vocabulary, MLUm, were positively impacted following implementation of the Project Approach. Limitations of the study and suggestions for research and practice are discussed.

How to merge courses via Skype™†? Lessons from an International Blended Learning Project‡

This study reports on an international project in which students taking the course Contemporary Issues in Turkish Politics in spring 2011 and fall 2011 at two institutions of higher education, ‘Gettysburg College’ in the United States and ‘Izmir University of Economics’ in Turkey, worked together in virtual learning environments to complete various tasks as part of their course work. The project employed a blend of traditional and technology-based teaching methods in order to introduce a technology like Skype in a bi-national learning environment in Turkey. Students collaborated and interacted with their international counterparts in two different virtual contexts. First, classrooms in the two countries were merged via Skype three times to conduct classroom-to-classroom discussion sessions on Turkish politics. Second, students were paired across locations to work on several assignments. In this paper, our goal is to present how Skype is used in a bi-national context as a blended teaching tool in an upper-level college course for instructors pursuing a similar exercise. In addition to outlining the process with a focus on Skype discussions and one-on-one student projects, we provide actual assignments and discussion questions. Students’ views elicited through surveys administered throughout the semester are presented alongside anecdotal evidence to reflect how the project was received.

Undergraduate student experiences and perceptions of group projects

This paper reports the experiences and perceptions of student group projects of three cohorts of undergraduates: a 3rd year capstone course in professional communication (N = 54), a 3rd year elective in chemical engineering (N = 29), and a core 2nd-year course in chemical engineering (N = 74).

Evaluating the Quality of Student Web Design Projects

Иван Шотлеков, Асен Рахнев - В настоящата работа се представя набор от критерии за оценяване на качеството на студентски проекти за уеб дизайн. Критериите са подходящи за разработване, самооценяване, колегиално оценяване и оценка на уеб сайтове, проектирани от студенти. Тази оценъчна скала е апробирана по време на курс “Английски език в информационните технологии”, проведен със студенти от първи курс по информатика във Факултета по математика и информатика на Пловдивски университет “Паисий Хилендарски”. Тя помага на студентите при разработването на мултидисциплинарен проект за уеб дизайн да придобият не само технически умения, свързани с проектирането на качествени уеб сайтове, но и някои процесуални умения, които ще им бъдат необходими в реалната практика.

Student Independent Projects Environmental Studies 2011: Vending Machines and Sustainable Development on Grenfell Campus, Memorial University

This Paper discusses the food and beverage machines that are located at Memorial University's Grenfell Campus and endeavors to assess how much those vending machines are being used and how they affect sustainability initiatives on campus. A survey was conducted to gauge the use of vending machines, their content and what is purchased, and if participants did not purchase from thes machines they were also asked why they did not.This survey produced many other questions that are directly linked to vending machines.Water quality on campus was heavily disscussed, along with the use of bottled water and implications associated with drinking only from bottles that are thrown away. The study concludes with a discussion of the alternative choices that can be implemented to replace vending machines.

Student Independent Projects Environmental Studies 2011: Creating Federal Policies to Support Environmental Education in Canada.

Environmental Education is an essential component of childhood education and can play a vital role in the development of positive environmental attitudes, community involvement and environmental awareness. One of the main challenges faced by Canadian educators is the lack of support and funding to fully engage and participate in Environmental Education programs that are locally available. To better understand the viewpoint and challenges of educators and Environmental Education programs, this paper includes an interview series with three Environmental Education leaders, followed by a discussion section on significant commonalities. Through the research of peer-reviewed literature, federal documents, and environmental networks, this research paper aims to interpret the development and challenges of K-12 environmental education in North America as well as to review the established programs, networks, and resources availble to Canadian educators.