Evaluation of Recycled Rubber in Asphalt Cement Concrete - Field Testing, Final Report for HR-330, 330A, 330B, 330C, 330D, 2002

Roughly 242 million used tires are generated annually in the United States. Many of these tires end up being landfilled or stockpiled. The stockpiles are unsightly, unsanitary, and also collect water which creates the perfect breeding ground for mosquitoes, some of which carry disease. In an effort to reduce the number of used tire stockpiles the federal government mandated the use of recycled rubber in federally funded, state implemented department of transportation (DOT) projects. This mandate required the use of recycled rubber in 5% of the asphalt cement concrete (ACC) tonnage used in federally funded projects in 1994, increasing that amount by 5% each year until 20% was reached, and remaining at 20% thereafter. The mandate was removed as part of the appropriations process in 1994, after the projects in this research had been completed. This report covers five separate projects that were constructed by the Iowa Department Of Transportation (DOT) in 1991 and 1992. These projects had all had some form of rubber incorporated into their construction and were evaluated for 5 years. The conclusion of the study is that the pavements with tire rubber added performed essentially the same as conventional ACC pavement. An exception was the use of rubber chips in a surface lift. This performed better at crack control and worse with friction values than conventional ACC. The cost of the pavement with rubber additive was significantly higher. As a result, the benefits do not outweigh the costs of using this recycled rubber process in pavements in Iowa.

Applications for Reuse of Lime Sludge from Water Softening, TR-535, 2005

Lime sludge, an inert material mostly composed of calcium carbonate, is the result of softening hard water for distribution as drinking water. A large city such as Des Moines, Iowa, produces about 30,700 tons of lime sludge (dry weight basis) annually (Jones et al., 2005). Eight Iowa cities representing, according to the United States (U.S.) Census Bureau, 23% of the state’s population of 3 million, were surveyed. They estimated that they collectively produce 64,470 tons of lime sludge (dry weight basis) per year, and they currently have 371,800 tons (dry weight basis) stockpiled. Recently, the Iowa Department of Natural Resources directed those cities using lime softening in drinking water treatment to stop digging new lagoons to dispose of lime sludge. Five Iowa cities with stockpiles of lime sludge funded this research. The research goal was to find useful and economical alternatives for the use of lime sludge. Feasibility studies tested the efficacy of using lime sludge in cement production, power plant SOx treatment, dust control on gravel roads, wastewater neutralization, and in-fill materials for road construction. Applications using lime sludge in cement production, power plant SOx treatment, and wastewater neutralization, and as a fill material for road construction showed positive results, but the dust control application did not. Since the fill material application showed the most promise in accomplishing the project’s goal within the time limits of this research project, it was chosen for further investigation. Lime sludge is classified as inorganic silt with low plasticity. Since it only has an unconfined compressive strength of approximately 110 kPa, mixtures with fly ash and cement were developed to obtain higher strengths. When fly ash was added at a rate of 50% of the dry weight of the lime sludge, the unconfined strength increased to 1600 kPa. Further, friction angles and California Bearing Ratios were higher than those published for soils of the same classification. However, the mixtures do not perform well in durability tests. The mixtures tested did not survive 12 cycles of freezing and thawing and wetting and drying without excessive mass and volume loss. Thus, these mixtures must be placed at depths below the freezing line in the soil profile. The results demonstrated that chemically stabilized lime sludge is able to contribute bulk volume to embankments in road construction projects.

Development of Quality Standards for Inclusion of High Recycled Asphalt Pavement Content in Asphalt Mixtures, TR-624, 2012

The main objective of this research is to examine the effects that different methods of RAP stockpile fractionation would have on the volumetric mix design properties for high-RAP content surface mixes, with the goal of meeting all specified criteria for standard HMA mix designs. To determine the distribution of fine aggregates and binder in RAP stockpile, RAP materials were divided by each sieve size. The composition of RAP materials retained on each sieve was analyzed to determine the optimum fractionation method. Fractionation methods were designed to separate the stockpile at a specified sieve size to control the amount of fine RAP materials which contain higher amounts of fine aggregates and dust contents. These fine RAP materials were used in reduced proportions or completely eliminated, thereby decreasing the amount of fine aggregate materials introduced to the mix. Mix designs were performed using RAP materials from four different stockpiles and the two fractionated methods were used with high-RAP contents up to 50% by virgin binder replacement. By using a fractionation method, a mix with up to 50% RAP was successfully designed while meeting all Superpave criteria and asphalt film thickness requirement by controlling the dust content from RAP stockpiles.

Excavation-drier method of energy-peat extraction reduces long-term climatic impact

Climatic impacts of energy-peat extraction are of increasing concern due to EU emissions trading requirements. A new excavation-drier peat extraction method has been developed to reduce the climatic impact and increase the efficiency of peat extraction. To quantify and compare the soil GHG fluxes of the excavation drier and the traditional milling methods, as well as the areas from which the energy peat is planned to be extracted in the future (extraction reserve area types), soil CO2, CH4 and N2O fluxes were measured during 2006–2007 at three sites in Finland. Within each site, fluxes were measured from drained extraction reserve areas, extraction fields and stockpiles of both methods and additionally from the biomass driers of the excavation-drier method. The Life Cycle Assessment (LCA), described at a principal level in ISO Standards 14040:2006 and 14044:2006, was used to assess the long-term (100 years) climatic impact from peatland utilisation with respect to land use and energy production chains where utilisation of coal was replaced with peat. Coal was used as a reference since in many cases peat and coal can replace each other in same power plants. According to this study, the peat extraction method used was of lesser significance than the extraction reserve area type in regards to the climatic impact. However, the excavation-drier method seems to cause a slightly reduced climatic impact as compared with the prevailing milling method.

The effects of uncertainty about the timing of deals on consumer behavior

I examine the effects of uncertainty about the timing of de aIs (i.e. temporary price cuts or sales) on consumer behavior in a dynamic inventory model of consumer choice. I derive implications for purchase behavior and test them empirically, using two years of scanner data for soft drinks. I fmd that loyal consumers' decisions, both about the allocation of their purchases over time and the quantity to be purchased in a particular deal, are affected by the uncertainty about the timing of the deal for the product. Loyal consumers buy a higher fraction of their overall purchases during de ais as the uncertainty decreases. This effect increases with an increase in the product' s share of a given consumer' s purchase in the same category or if the consumer stockpiles (i.e., is a shopper). During a particular deal, loyal shoppers increase the quantity they purchase the more time that has passed since the previous de aI, and the higher the uncertainty about the deals' timing. For the non-Ioyal consumers these effects are not significant. These results hold for products that are frequently purchased, like soft-drinks and yogurt, but do not hold for less frequentIy purchased products, such as laundry detergents. The fmdings suggest that manufacturers and retailers should incorporate the effects of deals' timing on consumers' purchase' decisions when deriving optimal pricing strategies.

Reference model for implementing an MRP system in a highly diverse component and seasonal lean production environment

Companies are currently choosing to integrate logics and systems to achieve better solutions. These combinations also include companies striving to join the logic of material requirement planning (MRP) system with the systems of lean production. The purpose of this article was to design an MRP as part of the implementation of an enterprise resource planning (ERP) in a company that produces agricultural implements, which has used the lean production system since 1998. This proposal is based on the innovation theory, theory networks, lean production systems, ERP systems and the hybrid production systems, which use both components and MRP systems, as concepts of lean production systems. The analytical approach of innovation networks enables verification of the links and relationships among the companies and departments of the same corporation. The analysis begins with the MRP implementation project carried out in a Brazilian metallurgical company and follows through the operationalisation of the MRP project, until its production stabilisation. The main point is that the MRP system should help the company's operations with regard to its effective agility to respond in time to demand fluctuations, facilitating the creation process and controlling the branch offices in other countries that use components produced in the matrix, hence ensuring more accurate estimates of stockpiles. Consequently, it presents the enterprise knowledge development organisational modelling methodology in order to represent further models (goals, actors and resources, business rules, business process and concepts) that should be included in this MRP implementation process for the new configuration of the production system.

Evaluation of a Year-Round Grazing System: Summer Cow-Calf Progress Report

A comparison was made between two different summer grazing systems. One system was the summer component of a year-round grazing system, involving the rotational stocking of smooth bromegrass--orchardgrass--birdsfoot trefoil pastures and winter stockpiles pastures with cowcalf pairs co-grazing with stocker yearlings at .75 animal units per acre. That system was compared with a minimal land system involving the rotational stocking of smooth bromegrass--orchardgrass-- birdsfoot trefoil summer pastures with cow-calf pairs grazing at .64 animal units per acre and hay removal from 25% of the pasture. Stocker yearlings or hay removal were used as management tools to remove excess forage and optimize forage quality. Hay was removed once from three fourths of the winter stockpiled pastures and one fourth of the allocated summer pastures. Cow-calf pairs grazing in the year-round system utilized on fourth of the winter stockpile pastures due to lack of forage, whereas cow-calf pairs grazing with hay removal were supplemented with harvested hay for two weeks during the summer. Grazing system did not affect cow body weight, condition score, or daily calf weight gain. Growing animal production per acre was affected by grazing system, with the minimal land system having a higher production level.

Three “Bali Deliverables” for more Food Security

As the clock is ticking for a positive outcome at the Ninth WTO Ministerial Conference to be held in Bali in December 2013, agricultural negotiators are scrambling to find solutions to issues such as tariff-rate quota (TRQ) administration and export competition in order to improve trade flows. The main issue seems to be whether WTO rules applying to public stockpiles in developing countries need to be changed or temporarily suspended as a means to enhance national food security. This paper is based on a note submitted to the ICTSD-IPC Expert Group “Meeting on Agriculture and Food Security – Policy Options for MC9 and beyond” (Geneva, June 2013). It lists the policy instruments impacting on global, national and (urban and rural) household food security – “The Food Security Tool Box” – and asks which immediate decisions the WTO Ministers might take in this field despite the political difficulties such as continued agro-dumping practices or the “land grab” issue. Three such “deliverables” are outlined: (i) regional and “virtual” food security schemes could be allowed to provide reserves to other countries without violating the obligation to “form an integral part of a food security programme identified in national legislation” (Agreement on Agriculture, Annex II, para 3); (ii) TRQ under-fills could be improved by mandatory enquiries into low fill rate situations; and (iii) World Food Program (WFP) and other non-commercial food purchases could be exempted from export restrictions and prohibitions. High ambitions for Bali seem to be misplaced. A more realistic yet real progress could restore the dwindling credibility of the WTO as a forum for trade negotiations.

Rechtliche Grundlagen für die Ernährungssicherheit in der Schweiz

The Right to Food, as enshrined in international law, has found its way into national constitutions and practices. What matters from a national and international legal point of view is how this policy objective is implemented. In Switzerland, a number of policies and their instruments are relevant here, namely agricultural, supply/stockpile, trade and development policies. This paper (in German) asks whether the policy instruments are coherent and how implementation conflicts and negative spill-over effects could be minimised. It finds that the four policy objectives enshrined in the Federal Constitution are not in themselves incoherent. However, certain Swiss agricultural policy instruments, even where they are compatible with relevant rules of the World Trade Organization (WTO), do have an avoidable negative impact on the Right to Food of developing country producers, because Swiss Food Security is overwhelmingly and increasingly defined by agricultural (self-reliance) policies (“Food Sovereignty”). This implies higher domestic food prices, commercial displacement and food dumping. The conclusions suggest a number of optimisations as a contribution to the presently on-going reform process for 1983 National Economic Supply Act 1983 (NESA), such as virtual stockpiles and taxpayer-financed stockpile costs.

Ethiopia's Food Reserve Policies and Practice

Ethiopia has for a long time been one of the world’s most food-insecure countries. Efforts by the government and a multitude of sponsors including NGOs have developed an array of institutions and instruments to mitigate the negative impact of production and supply disruptions. Public stockpiles are one such tool, the use of which is rapidly increasing worldwide. This brief field study examines the Ethiopian policies and practice in context, including various instruments operated by farmers, processors and traders. The study finds that the multiple objectives assigned to food reserves as well as the present management structure may not be well-suited at a time of high world market prices and when international food aid is dwindling, and as the international regulatory trade and investment environment remains a matter of unfinished business from a global food security perspective. A comprehensive study of various options for improvements would lay out policy alternatives for public authorities and stakeholders.

After Bali: WTO Rules Applying to Public Food Reserves

Once more, agriculture threatened to prevent all progress in multilateral trade rule-making at the Ninth WTO Ministerial Conference in December 2013. But this time, the “magic of Bali” worked. After the clock had been stopped mainly because of the food security file, the ministers adopted a comprehensive package of decisions and declarations mainly in respect of development issues. Five are about agriculture. Decision 38 on Public Stockholding for Food Security Purposes contains a “peace clause” which will now be shielding certain stockpile programmes from subsidy complaints in formal litigation. This article provides contextual background and analyses this decision from a legal perspective. It finds that, at best, Decision 38 provides a starting point for a WTO Work Programme for food security, for review at the Eleventh Ministerial Conference which will probably take place in 2017. At worst, it may unduly widen the limited window for government-financed competition existing under present rules in the WTO Agreement on Agriculture – yet without increasing global food security or even guaranteeing that no subsidy claims will be launched, or entertained, under the WTO dispute settlement mechanism. Hence, the Work Programme should find more coherence between farm support and socio-economic and trade objectives when it comes to stockpiles. This also encompasses a review of the present WTO rules applying to other forms of food reserves and to regional or “virtual” stockpiles. Another “low hanging fruit” would be a decision to exempt food aid purchases from export restrictions.

Computer animation of hot spot development in bulk coal as an aid for training coal miners

The processes that take place during the development of a heating are difficult to visualise. Bulk coal self-heating tests at The University of Queensland (UQ) using a two-metre column are providing graphic evidence of the stages that occur during a heating. Data obtained from these tests, both temperature and corresponding off-gas evolution can be transformed into what is effectively a video-replay of the heating event. This is achieved by loading both sets of data into a newly developed animation package called Hotspot. The resulting animation is ideal for spontaneous combustion training purposes as the viewer can readily identify the different hot spot stages and corresponding off-gas signatures. Colour coding of the coal temperature, as the hot spot forms, highlights its location in the coal pile and shows its ability to migrate upwind. An added benefit of the package is that once a mine has been tested in the UQ two-metre column, there is a permanent record of that particular coals performance for mine personnel to view.

MICROWAVE ABSORPTION PROPERTIES OF TIRES

The waste tire is belonging to insoluble high polymer elastic materials. It takes hundreds of years to resolve the macromolecules of waste tire into the standard which does not pollute the environment. More and more waste tires are air stored which causes space occupation and mosquito-breeding in the places that will spread diseases. The disposal methods include landfill, stockpiles, dumping and incising into particles. However, all these methods are not technically and economically efficient. The trend for the development of waste tire treatment processes is low cost, on-site, and high product recovery at high energy efficiency. In this project, microwave energy has been applied for treatment of the waste tire in laboratory scale. Experimental conditions were varied in order to find the optimum processing parameters such as temperature and atmosphere. The microwave absorption capability of waste tire rubber was investigated by measuring its dielectric properties from room temperature to 800°C in stagnant air and pure nitrogen atmospheres, respectively, at both 915 and 2466MHz.The dielectric parameters data increase steadily at temperatures below 400°C. At temperatures above 400°C, the relative dielectric loss factor and relative dielectric constant begin to decrease. This is due to the solid phase of tire rubber begins to transform to gas phase and the release of volatiles. The calculations of microwave half-power depth and penetration depth of waste tire rubber show that the pyrolysis process significantly improves the microwave absorption capability of the waste tire rubber at low temperatures. The calculated reflection loss of the waste tire rubber suggests that its maximum microwave absorption can be obtained when the rubber has a thickness of 25mm at 915MHz. The sample dimension has a significant effect on the overall performance of microwave absorption in waste tire during pyrolysis and thus on the efficiency of microwave waste tire rubber pyrolysis.