Structural steelwork.

Includes index.

Influence of processing on the roll forming characteristics of recovery annealed steel

Roll forming (including corrugating) of high strength steel has for many years been treated as an art rather than a science. This work, by using analysis at both the microscopic and standard mechanical level, has demystified the production of these high strength steels, and has helped point the direction for further development of these efficient construction products.

Ultrafine ferrite formation in steels through thermomechanical processing

The main aim of this study was to investigate the critical conditions for the formation of ultrafine grain structures using hot torsion and wedge rolling techniques. In addition, the effect of thermomechanical parameters and steel composition on the critical conditions for ultrafine grain structure formation has been systematically evaluated.

Low strain processing of LC and ULC steels

Temper rolling and tension levelling are commonly used to manufacture flat rolled steel. Both processes lengthen the steel at strains up to 3% by applying a load and stretching the strip. By latering the balance between the load and the tension the formability of the low carbon and ultra low carbon steel may be optimised.

Press forming performance of galvanneal coated steel

This project quantified the press formability of galvanneal coated steel. A coil of galvanneal coated steel was produced containing various coating structures. Using different lubricants, the powdering, friction and forming properties were determined. It was found that optimum formability was obtained by effective lubrication while galvanneal coating structure controlled powdering resistance.

Estudo do efeito da adição da escória de aciaria no processamento e propriedades finais de telhas cerâmicas

This research presents an overview of the addition steelwork dust of ceramic shingles in order to contribute to the utilization use of such residue. The ceramic industry perspective in the Brazilian State of Piauí is quite promising. Unlike other productive sectors, the ceramic industry uses basically natural raw materials. Its final products are, in short, the result of transforming clay compounds. These raw materials are composed primarily of aluminum oxide, silicon, iron, sodium, magnesium, end calcium, among others. It was verified that steelwork dust is composed primarily of these same oxides, so that its incorporation in to structural ceramics is a very reasonable idea. Both clay and steelwork powder were characterized by AG, XRF, XRD, TGA and DTA. In addition, steelwork dust samples containing (0%, 5%, 10%, 15%, 20% and 25%) were extruded and burned at 800°C, 850°C, 900°C and 950°C. Then t echnological tests of linear shrinkage, water uptake, apparent porosity, apparent density and flexural strengthwere carried at. The results showed the possibility of using steelwork powder in ceramic shingles until 15% significant improvement in physical and mechanical properties. This behavior shows the possibility of burning at temperatures lower than 850ºC, thus promoting a product final cost reduction

Reatividade de uma escória de siderurgia em um latossolo vermelho distrófico

O presente trabalho objetivou estudar a reatividade de uma escória de siderurgia de aciaria, em diferentes frações granulométricas, aplicada em uma amostra de um Latossolo Vermelho distrófico, ácido, em condições de laboratório. Utilizou-se um fatorial 4 x 3 + 2 com quatro repetições, sendo quatro granulometrias (material retido entre as peneiras ABNT 5-10; 10-20; 20-50 e < 50), três doses de escória, correspondentes a 0,00, 5,04 e 10,08 t ha-1, ou seja, 0,00, 1,01 e 2,02 g por copo com 0,40 dm³ de solo e duas testemunhas (escória e calcário dolomítico, na dose correspondente a V = 70 %, ou seja, 1,01 e 0,60 g por copo, respectivamente). Para definir as doses, adotou-se o método da saturação por bases, considerando-se o valor do PRNT da escória e do calcário, obtidos na granulometria correspondente. O solo foi mantido na capacidade de campo e incubado durante os períodos de três, seis e nove meses. As frações granulométricas da escória influiram diferentemente na acidez do solo. A fração retida entre as peneiras ABNT 5-10 mostrou-se ineficiente, enquanto a fração que passa pela peneira ABNT 50 foi a que conferiu o maior efeito na neutralização da acidez. A reatividade das partículas da escória retidas nas peneiras intermediárias, ABNT 10-20 e 20-50, foi proporcional aos valores vigentes na legislação brasileira para calcários. Portanto, a taxa de reatividade obtida para a escória foi de: ABNT nº 5-10 = 0 %; 10-20 = 22 %; 20-50 = 58 % e < 50 = 100 %.

Estudo do efeito da adição da escória de aciaria no processamento e propriedades finais de telhas cerâmicas

This research presents an overview of the addition steelwork dust of ceramic shingles in order to contribute to the utilization use of such residue. The ceramic industry perspective in the Brazilian State of Piauí is quite promising. Unlike other productive sectors, the ceramic industry uses basically natural raw materials. Its final products are, in short, the result of transforming clay compounds. These raw materials are composed primarily of aluminum oxide, silicon, iron, sodium, magnesium, end calcium, among others. It was verified that steelwork dust is composed primarily of these same oxides, so that its incorporation in to structural ceramics is a very reasonable idea. Both clay and steelwork powder were characterized by AG, XRF, XRD, TGA and DTA. In addition, steelwork dust samples containing (0%, 5%, 10%, 15%, 20% and 25%) were extruded and burned at 800°C, 850°C, 900°C and 950°C. Then t echnological tests of linear shrinkage, water uptake, apparent porosity, apparent density and flexural strengthwere carried at. The results showed the possibility of using steelwork powder in ceramic shingles until 15% significant improvement in physical and mechanical properties. This behavior shows the possibility of burning at temperatures lower than 850ºC, thus promoting a product final cost reduction