Messung der B s-Oszillation mit dem semileptonischen Zerfall B 0 s D - s (phi pi -) my + ny my mit dem D0-Detektor

Das Standardmodell (SM) der Teilchenphysik beschreibt sehr präzise die fundamentalen Bausteine und deren Wechselwirkungen (WW). Trotz des Erfolges gibt es noch offene Fragen, die vom SM nicht beantwortet werden können. Ein noch noch nicht abgeschlossener Test besteht aus der Messung der Stärke der schwachen Kopplung zwischen Quarks. Neutrale B- bzw. $bar{B}$-Mesonen können sich innerhalb ihrer Lebensdauer über einen Prozeß der schwachen WW in ihr Antiteilchen transformieren. Durch die Messung der Bs-Oszillation kann die Kopplung Vtd zwischen den Quarksorten Top (t) und Down (d) bestimmt werden. Alle bis Ende 2005 durchgeführten Experimente lieferten lediglich eine untere Grenze für die Oszillationsfrequenz von ms>14,4ps-1. Die vorliegenden Arbeit beschreibt die Messung der Bs-Oszillationsfrequenz ms mit dem semileptonischen Kanal BsD(-)+. Die verwendeten Daten stammen aus Proton-Antiproton-Kollisionen, die im Zeitraum von April 2002 bis März 2006 mit dem DØ-Detektor am Tevatron-Beschleuniger des Fermi National Accelerator Laboratory bei einer Schwerpunktsenergie von $sqrt{s}$=1,96TeV aufgezeichnet wurden. Die verwendeten Datensätze entsprechen einer integrierten Luminosität von 1,3fb-1 (620 millionen Ereignisse). Für diese Oszillationsmessung wurde der Quarkinhalt des Bs-Mesons zur Zeit der Produktion sowie des Zerfalls bestimmt und die Zerfallszeit wurde gemessen. Nach der Rekonstruktion und Selektion der Signalereignisse legt die Ladung des Myons den Quarkinhalt des Bs-Mesons zur Zeit des Zerfalls fest. Zusätzlich wurde der Quarkinhalt des Bs-Mesons zur Zeit der Produktion markiert. b-Quarks werden in $pbar{p}$-Kollisionen paarweise produziert. Die Zerfallsprodukte des zweiten b-Hadrons legen den Quarkinhalt des Bs-Mesons zur Zeit der Produktion fest. Bei einer Sensitivität von msenss=14,5ps-1 wurde eine untere Grenze für die Oszillationsfrequenz ms>15,5ps-1 bestimmt. Die Maximum-Likelihood-Methode lieferte eine Oszillationsfrequenz ms>(20+2,5-3,0(stat+syst)0,8(syst,k))ps-1 bei einem Vertrauensniveau von 90%. Der nicht nachgewiesene Neutrinoimpuls führt zu dem systematischen Fehler (sys,k). Dieses Resultat ergibt zusammen mit der entsprechenden Oszillation des Bd-Mesons eine signifikante Messung der Kopplung Vtd, in Übereinstimmung mit weiteren Experimenten über die schwachen Quarkkopplungen.

Measurement of the t-channel single-top-quark production cross section and of the |V (tb)| CKM matrix element in pp collisions at root s=8 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

First measurements of the aSPECT spectrometer

The aSPECT spectrometer has been constructed to measure, with high precision, the integral proton spectrum of the free neutron decay. From this spectrum the neutrino electron angular correlation coefficient a can be inferred. The coefficient a is involved in several Standard Model tests, like the unitarity test of the Cabibbo-Kobayashi-Maskawa quark mixing matrix. aSPECT has been designed to determine the coefficient a with an accuracy better than 3×10−4, that is, one order of magnitude better than the best current accuracy. First measurements with neutron beam with the aSPECT spectrometer were performed in the Forschungsneutronenquelle Heinz Maier-Leibnitz, in Munich. A study of the data taken in this period is presented in this thesis, demonstrating the proof of principle of the spectrometer. However, the observation of situation and time-dependent background instabilities impedes the report of a new value of the coefficient a. A thorough data analysis is carried out to identify sources of these background instabilities in order to improve the aSPECT experiment for future beam times. The investigation indicates that trapped particles are most likely the reason for the background problems. Furthermore, it has been observed that measurements containing less trapped particles provide a-values closer to the currently Particle Data Group value. Based on this findings, different measures are proposed to eliminate potential traps in the spectrometer. Indeed, with the proposed modifications realized for the following beam-times, the observed background instabilities were greatly reduced.

Measurement of the proton recoil spectrum in neutron beta decay with the spectrometer aSPECT : study of systematic effects

Precision measurements of observables in neutron beta decay address important open questions of particle physics and cosmology. In this thesis, a measurement of the proton recoil spectrum with the spectrometer aSPECT is described. From this spectrum the antineutrino-electron angular correlation coefficient a can be derived. In our first beam time at the FRM II in Munich, background instabilities prevented us from presenting a new value for a. In the latest beam time at the ILL in Grenoble, the background has been reduced sufficiently. As a result of the data analysis, we identified and fixed a problem in the detector electronics which caused a significant systematic error. The aim of the latest beam time was a new value for a with an error well below the present literature value of 4%. A statistical accuracy of about 1.4% was reached, but we could only set upper limits on the correction of the problem in the detector electronics, too high to determine a meaningful result. This thesis focused on the investigation of different systematic effects. With the knowledge of the systematics gained in this thesis, we are able to improve aSPECT to perform a 1% measurement of a in a further beam time.

Measurement of the Single Top Quark Production Cross Section at CDF

We report a measurement of the single top quark production cross section in 2.2 ~fb-1 of p-pbar collision data collected by the Collider Detector at Fermilab at sqrt{s}=1.96 TeV. Candidate events are classified as signal-like by three parallel analyses which use likelihood, matrix element, and neural network discriminants. These results are combined in order to improve the sensitivity. We observe a signal consistent with the standard model prediction, but inconsistent with the background-only model by 3.7 standard deviations with a median expected sensitivity of 4.9 standard deviations. We measure a cross section of 2.2 +0.7 -0.6(stat+sys) pb, extract the CKM matrix element value |V_{tb}|=0.88 +0.13 -0.12 (stat+sys) +- 0.07(theory), and set the limit |V_{tb}|>0.66 at the 95% C.L.

Observation of single top quark production and measurement of |Vtb| with CDF

We report the observation of electroweak single top quark production in 3.2  fb-1 of pp̅ collision data collected by the Collider Detector at Fermilab at √s=1.96  TeV. Candidate events in the W+jets topology with a leptonically decaying W boson are classified as signal-like by four parallel analyses based on likelihood functions, matrix elements, neural networks, and boosted decision trees. These results are combined using a super discriminant analysis based on genetically evolved neural networks in order to improve the sensitivity. This combined result is further combined with that of a search for a single top quark signal in an orthogonal sample of events with missing transverse energy plus jets and no charged lepton. We observe a signal consistent with the standard model prediction but inconsistent with the background-only model by 5.0 standard deviations, with a median expected sensitivity in excess of 5.9 standard deviations. We measure a production cross section of 2.3-0.5+0.6(stat+sys)  pb, extract the value of the Cabibbo-Kobayashi-Maskawa matrix element |Vtb|=0.91-0.11+0.11(stat+sys)±0.07  (theory), and set a lower limit |Vtb|>0.71 at the 95% C.L., assuming mt=175  GeV/c2.

Observation of single top quark production and measurement of |Vtb| with CDF

We report the observation of electroweak single top quark production in 3.2 fb-1 of ppbar collision data collected by the Collider Detector at Fermilab at sqrt{s}=1.96 TeV. Candidate events in the W+jets topology with a leptonically decaying W boson are classified as signal-like by four parallel analyses based on likelihood functions, matrix elements, neural networks, and boosted decision trees. These results are combined using a super discriminant analysis based on genetically evolved neural networks in order to improve the sensitivity. This combined result is further combined with that of a search for a single top quark signal in an orthogonal sample of events with missing transverse energy plus jets and no charged lepton. We observe a signal consistent with the standard model prediction but inconsistent with the background-only model by 5.0 standard deviations, with a median expected sensitivity in excess of 5.9 standard deviations. We measure a production cross section of 2.3+0.6-0.5(stat+sys) pb, extract the CKM matrix element value |Vtb|=0.91+0.11-0.11 (stat+sys)+-0.07(theory), and set a lower limit |Vtb|>0.71 at the 95% confidence level, assuming m_t=175 GeVc^2.

Measurement of the Single-Top-Quark Production Cross Section at CDF

We report a measurement of the single top quark production cross section in 2.2 ~fb-1 of p-pbar collision data collected by the Collider Detector at Fermilab at sqrt{s}=1.96 TeV. Candidate events are classified as signal-like by three parallel analyses which use likelihood, matrix element, and neural network discriminants. These results are combined in order to improve the sensitivity. We observe a signal consistent with the standard model prediction, but inconsistent with the background-only model by 3.7 standard deviations with a median expected sensitivity of 4.9 standard deviations. We measure a cross section of 2.2 +0.7 -0.6(stat+sys) pb, extract the CKM matrix element value |V_{tb}|=0.88 +0.13 -0.12 (stat+sys) +- 0.07(theory), and set the limit |V_{tb}|>0.66 at the 95% C.L.

Observation of Electroweak Single Top-Quark Production

We report the first observation of single top quark production using 3.2 fb^-1 of pbar p collision data with sqrt{s}=1.96 TeV collected by the Collider Detector at Fermilab. The significance of the observed data is 5.0 standard deviations, and the expected sensitivity for standard model production and decay is in excess of 5.9 standard deviations. Assuming m_t=175 GeV/c^2, we measure a cross section of 2.3 +0.6 -0.5 (stat+syst) pb, extract the CKM matrix element value |V_{tb}|=0.91 +-0.11 (stat+syst) 0.07(theory), and set the limit |V_{tb}|>0.71 at the 95% C.L.

Measurement of the neutron beta decay asymmetry using ultracold neutrons

The free neutron beta decay correlation A₀ between neutron polarization and electron emission direction provides the strongest constraint on the ratio λ = g_A/g_V of the Axial-vector to Vector coupling constants in Weak decay. In conjunction with the CKM Matrix element V_ud and the neutron lifetime τ_n, λ provides a test of Standard Model assumptions for the Weak interaction. Leading high-precision measurements of A₀ and τ_n in the 1995-2005 time period showed discrepancies with prior measurements and Standard Model predictions for the relationship between λ, τ_n, and V_ud. The UCNA experiment was developed to measure A₀ from decay of polarized ultracold neutrons (UCN), providing a complementary determination of λ with different systematic uncertainties from prior cold neutron beam experiments. This dissertation describes analysis of the dataset collected by UCNA in 2010, with emphasis on detector response calibrations and systematics. The UCNA measurement is placed in the context of the most recent τ_n results and cold neutron A₀ experiments.

Mesure du rapport d'embranchement des désintégrations B^0--> pi^- l^+v et B^+--> êta^(') l^+v, du spectre des facteurs de forme des désintégrations B^0--> pi^- l^+v et B^+--> êta l^+v, et extraction de |V_ub| dans l'expérience BABAR

Nous rapportons les résultats d'une étude des désintégrations semileptoniques non-charmées B^+--> êta^(') l^+v et B^0--> pi^- l^+v, mesurés par le détecteur BABAR avec une production d'environ 464 millions de paires de mésons BBbar issues des collisions e^+e^- à la résonance Upsilon(4S). L'analyse reconstruit les événements avec une technique relâchée des neutrinos. Nous obtenons les rapports d'embranchement partiels pour les désintégrations B^+--> êta l^+v et B^0--> pi^- l^+v en trois et douze intervalles de q^2, respectivement, à partir desquels nous extrayons les facteurs de forme f_+(q^2) et les rapports d'embranchement totaux B(B^+--> êta l^+v) = (3.39 +/- 0.46_stat +/- 0.47_syst) x 10^-5 et B(B^0--> pi^- l^+v) = (1.42 +/- 0.05_stat +/- 0.08_syst) x 10^-4. Nous mesurons aussi B(B^+--> êta' l^+v) = (2.43 +/- 0.80_stat +/- 0.34_syst) x 10^-5. Nous obtenons les valeurs de la norme de l'élément |V_ub| de la matrice CKM en utilisant trois calculs différents de la CDQ.

Hierarchy and anarchy in quark mass matrices, or can hierarchy tolerate anarchy?

The consequences of adding random perturbations (anarchy) to a baseline hierarchical model of quark masses and mixings are explored. Even small perturbations of the order of 5% of the smallest non-zero element can already give deviations significantly affecting parameters of the Cabibbo-Kobayashi-Maskawa (CKM) matrix, so any process generating the anarchy should in general be limited to this order of magnitude. The regularities of quark masses and mixings thus appear to be far from a generic feature of randomness in the mass matrices, and more likely indicate an underlying order. (C) 2001 Published by Elsevier B.V. B.V.

The flavor problem and discrete symmetries

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Light-Front model of transition form-factors in heavy meson decay

Electroweak transition form factors of heavy meson decays are important ingredients in the extraction of the Cabibbo-Kobayashi-Maskawa (CKM) matrix elements from experimental data. In this work, within a. light-front framework, we calculate electroweak transition form factor for the semileptonic decay of D mesons into a pion or a kaon. The model results underestimate in both cases the new data of CLEO for the larger momentum transfers accessible in the experiment. We discuss possible reasons for that in order to improve the model.

Precision Measurement of the Ratio B(t -> Wb)/B(t -> Wq) and Extraction of V-tb

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)