NEX-LMS: A novel adaptive control scheme for harmonic sound quality control

This paper presents a novel adaptive control scheme. with improved convergence rate, for the equalization of harmonic disturbances such as engine noise. First, modifications for improving convergence speed of the standard filtered-X LMS control are described. Equalization capabilities are then implemented, allowing the independent tuning of harmonics. Eventually, by providing the desired order vs. engine speed profiles, the pursued sound quality attributes can be achieved. The proposed control scheme is first demonstrated with a simple secondary path model and, then, experimentally validated with the aid of a vehicle mockup which is excited with engine noise. The engine excitation is provided by a real-time sound quality equivalent engine simulator. Stationary and transient engine excitations are used to assess the control performance. The results reveal that the proposed controller is capable of large order-level reductions (up to 30 dB) for stationary excitation, which allows a comfortable margin for equalization. The same holds for slow run-ups ( > 15s) thanks to the improved convergence rate. This margin, however, gets narrower with shorter run-ups (<= 10s). (c) 2010 Elsevier Ltd. All rights reserved.

Active sound quality control of engine induced cavity noise

Active control solutions appear to be a feasible approach to cope with the steadily increasing requirements for noise reduction in the transportation industry. Active controllers tend to be designed with a target on the sound pressure level reduction. However, the perceived control efficiency for the occupants can be more accurately assessed if psychoacoustic metrics can be taken into account. Therefore, this paper aims to evaluate, numerically and experimentally, the effect of a feedback controller on the sound quality of a vehicle mockup excited with engine noise. The proposed simulation scheme is described and experimentally validated. The engine excitation is provided by a sound quality equivalent engine simulator, running on a real-time platform that delivers harmonic excitation in function of the driving condition. The controller performance is evaluated in terms of specific loudness and roughness. It is shown that the use of a quite simple control strategy, such as a velocity feedback, can result in satisfactory loudness reduction with slightly spread roughness, improving the overall perception of the engine sound. (C) 2008 Elsevier Ltd. All rights reserved.

Soundscape quality analysis by fuzzy logic: A field study in Cordoba, Argentina

This research studies urban soundscapes through the comparative analysis of twelve public open spaces in the city of Córdoba (Argentina), taken as case studies. The work aims to examine selection of indicators and assessment tools intended to characterize soundscape quality. The field study was carried out through surveys and acoustic and psychoacoustic indicators, that are used together to objectively describe the sound quality of urban spaces. The study shows that, while there is a relationship of these indicators with the sound quality of the spaces, this is not linear. Their relative importance or influence depends on the interrelations occurring between the parameters studied. A model analyzing and correlating the parameters with the sound quality, based on the postulates of fuzzy logic, was applied as a tool of analysis, and it was seen to achieve a very close approximation to the subjective or perceptual response of the inhabitants. This close match between the model results and the perceptual response of the users confirms the fuzzy model as an effective tool for the study, not only of soundscapes, but also for those situations in which objective parameters must be related to the perceptual response of users.

A state-space modeling approach for active structural acoustic control

The demands for improvement in sound quality and reduction of noise generated by vehicles are constantly increasing, as well as the penalties for space and weight of the control solutions. A promising approach to cope with this challenge is the use of active structural-acoustic control. Usually, the low frequency noise is transmitted into the vehicle`s cabin through structural paths, which raises the necessity of dealing with vibro-acoustic models. This kind of models should allow the inclusion of sensors and actuators models, if accurate performance indexes are to be accessed. The challenge thus resides in deriving reasonable sized models that integrate structural, acoustic, electrical components and the controller algorithm. The advantages of adequate active control simulation strategies relies on the cost and time reduction in the development phase. Therefore, the aim of this paper is to present a methodology for simulating vibro-acoustic systems including this coupled model in a closed loop control simulation framework that also takes into account the interaction between the system and the control sensors/actuators. It is shown that neglecting the sensor/actuator dynamics can lead to inaccurate performance predictions.

Efficient Watermarking Schemes for Speaker Verification Guaranteeing Non-repudiation

Presently different audio watermarking methods are available; most of them inclined towards copyright protection and copy protection. This is the key motive for the notion to develop a speaker verification scheme that guar- antees non-repudiation services and the thesis is its outcome. The research presented in this thesis scrutinizes the field of audio water- marking and the outcome is a speaker verification scheme that is proficient in addressing issues allied to non-repudiation to a great extent. This work aimed in developing novel audio watermarking schemes utilizing the fun- damental ideas of Fast-Fourier Transform (FFT) or Fast Walsh-Hadamard Transform (FWHT). The Mel-Frequency Cepstral Coefficients (MFCC) the best parametric representation of the acoustic signals along with few other key acoustic characteristics is employed in crafting of new schemes. The au- dio watermark created is entirely dependent to the acoustic features, hence named as FeatureMark and is crucial in this work. In any watermarking scheme, the quality of the extracted watermark de- pends exclusively on the pre-processing action and in this work framing and windowing techniques are involved. The theme non-repudiation provides immense significance in the audio watermarking schemes proposed in this work. Modification of the signal spectrum is achieved in a variety of ways by selecting appropriate FFT/FWHT coefficients and the watermarking schemes were evaluated for imperceptibility, robustness and capacity char- acteristics. The proposed schemes are unequivocally effective in terms of maintaining the sound quality, retrieving the embedded FeatureMark and in terms of the capacity to hold the mark bits. Robust nature of these marking schemes is achieved with the help of syn- chronization codes such as Barker Code with FFT based FeatureMarking scheme and Walsh Code with FWHT based FeatureMarking scheme. An- other important feature associated with this scheme is the employment of an encryption scheme towards the preparation of its FeatureMark that scrambles the signal features that helps to keep the signal features unreve- laed. A comparative study with the existing watermarking schemes and the ex- periments to evaluate imperceptibility, robustness and capacity tests guar- antee that the proposed schemes can be baselined as efficient audio water- marking schemes. The four new digital audio watermarking algorithms in terms of their performance are remarkable thereby opening more opportu- nities for further research.

Loudness scattering due to vibro-acoustic model variability

The use of numerical simulation in the design and evaluation of products performance is ever increasing. To a greater extent, such estimates are needed in a early design stage, when physical prototypes are not available. When dealing with vibro-acoustic models, known to be computationally expensive, a question remains, which is related to the accuracy of such models in view of the well-know variability inherent to the mass manufacturing production techniques. In addition, both academia and industry have recently realized the importance of actually listening to a products sound, either by measurements or by virtual sound synthesis, in order to assess its performance. In this work, the scatter of significant parameter variations on a simplified vehicle vibro-acoustic model is calculated on loudness metrics using Monte Carlo analysis. The mapping from the system parameters to sound quality metric is performed by a fully-coupled vibro-acoustic finite element model. Different loudness metrics are used, including overall sound pressure level expressed in dB and Specific Loudness in Sones. Sound quality equivalent sources are used to excite this model and the sound pressure level at the driver's head position is acquired to be evaluated according to sound quality metrics. No significant variation has been perceived when evaluating the system using regular sound pressure level expressed in in dB and dB(A). This happens because of the third-octave filters that averages the results under some frequency bands. On the other hand, Zwicker Loudness presents important variations, arguably, due to the masking effects.

Speech understanding in quiet and in noise with the bone-anchored hearing aids Baha Compact and Baha Divino

CONCLUSIONS: Speech understanding is better with the Baha Divino than with the Baha Compact in competing noise from the rear. No difference was found for speech understanding in quiet. Subjectively, overall sound quality and speech understanding were rated better for the Baha Divino. OBJECTIVES: To compare speech understanding in quiet and in noise and subjective ratings for two different bone-anchored hearing aids: the recently developed Baha Divino and the Baha Compact. PATIENTS AND METHODS: Seven adults with bilateral conductive or mixed hearing losses who were users of a bone-anchored hearing aid were tested with the Baha Compact in quiet and in noise. Tests were repeated after 3 months of use with the Baha Divino. RESULTS: There was no significant difference between the two types of Baha for speech understanding in quiet when tested with German numbers and monosyllabic words at presentation levels between 50 and 80 dB. For speech understanding in noise, an advantage of 2.3 dB for the Baha Divino vs the Baha Compact was found, if noise was emitted from a loudspeaker to the rear of the listener and the directional microphone noise reduction system was activated. Subjectively, the Baha Divino was rated statistically significantly better in terms of overall sound quality.

Mathematical analysis for perceived annoyance of impulsive sounds in terms of physical factors

From the customer satisfaction point of view, sound quality of any product has become one of the important factors these days. The primary objective of this research is to determine factors which affect the acceptability of impulse noise. Though the analysis is based on a sample impulse sound file of a Commercial printer, the results can be applied to other similar impulsive noise. It is assumed that impulsive noise can be tuned to meet the accepTable criteria. Thus it is necessary to find the most significant factors which can be controlled physically. This analysis is based on a single impulse. A sample impulsive sound file is tweaked for different amplitudes, background noise, attack time, release time and the spectral content. A two level factorial design of experiments (DOE) is applied to study the significant effects and interactions. For each impulse file modified as per the DOE, the magnitude of perceived annoyance is calculated from the objective metric developed recently at Michigan Technological University. This metric is based on psychoacoustic criteria such as loudness, sharpness, roughness and loudness based impulsiveness. Software called ‘Artemis V11.2’ developed by HEAD Acoustics is used to calculate these psychoacoustic terms. As a result of two level factorial analyses, a new objective model of perceived annoyance is developed in terms of above mentioned physical parameters such as amplitudes, background noise, impulse attack time, impulse release time and the spectral content. Also the effects of the significant individual factors as well as two level interactions are also studied. The results show that all the mentioned five factors affect annoyance level of an impulsive sound significantly. Thus annoyance level can be reduced under the criteria by optimizing the levels. Also, an additional analysis is done to study the effect of these five significant parameters on the individual psychoacoustic metrics.

A two-microphone noise reduction system for cochlear implant users with nearby microphones. Part II: Performance Evaluation

Users of cochlear implants (auditory aids, which stimulate the auditory nerve electrically at the inner ear) often suffer from poor speech understanding in noise. We evaluate a small (intermicrophone distance 7 mm) and computationally inexpensive adaptive noise reduction system suitable for behind-the-ear cochlear implant speech processors. The system is evaluated in simulated and real, anechoic and reverberant environments. Results from simulations show improvements of 3.4 to 9.3 dB in signal to noise ratio for rooms with realistic reverberation and more than 18 dB under anechoic conditions. Speech understanding in noise is measured in 6 adult cochlear implant users in a reverberant room, showing average improvements of 7.9–9.6 dB, when compared to a single omnidirectional microphone or 1.3–5.6 dB, when compared to a simple directional two-microphone device. Subjective evaluation in a cafeteria at lunchtime shows a preference of the cochlear implant users for the evaluated device in terms of speech understanding and sound quality.

Fine control of drug delivery for cochlear implant applications

Cochlear implants are neuroprostheses that are inserted into the inner ear to directly electrically stimulate the auditory nerve, thus replacing lost cochlear receptors, the hair cells. The reduction of the gap between electrodes and nerve cells will contribute to technological solutions simultaneously increasing the frequency resolution, the sound quality and the amplification of the signal. Recent findings indicate that neurotrophins (NTs) such as brain derived neurotrophic factor (BDNF) stimulate the neurite outgrowth of auditory nerve cells by activating Trk receptors on the cellular surface (1–3). Furthermore, small-size TrkB receptor agonists such as di-hydroxyflavone (DHF) are now available, which activate the TrkB receptor with similar efficiency as BDNF, but are much more stable (4). Experimentally, such molecules are currently used to attract nerve cells towards, for example, the electrodes of cochlear implants. This paper analyses the scenarios of low dose aspects of controlled release of small-size Trk receptor agonists from the coated CI electrode array into the inner ear. The control must first ensure a sufficient dose for the onset of neurite growth. Secondly, a gradient in concentration needs to be maintained to allow directive growth of neurites through the perilymph-filled gap towards the electrodes of the implant. We used fluorescein as a test molecule for its molecular size similarity to DHF and investigated two different transport mechanisms of drug dispensing, which both have the potential to fulfil controlled low-throughput drug-deliverable requirements. The first is based on the release of aqueous fluorescein into water through well-defined 60-μm size holes arrays in a membrane by pure osmosis. The release was both simulated using the software COMSOL and observed experimentally. In the second approach, solid fluorescein crystals were encapsulated in a thin layer of parylene (PPX), hence creating random nanometer-sized pinholes. In this approach, the release occurred due to subsequent water diffusion through the pinholes, dissolution of the fluorescein and then release by out-diffusion. Surprisingly, the release rate of solid fluorescein through the nanoscopic scale holes was found to be in the same order of magnitude as for liquid fluorescein release through microscopic holes.

Acoustic characterisation of cinema screens

As a consequence of cinema screens being placed in front of screen-speakers, a reduction in sound quality has been noticed. Cinema screens not only let the sound go through them, but also absorb a small amount of it and reflect the sound which impacts on the screen to the back, coming forward again in case it impacts on the loudspeaker. This backwards reflection in addition to the signal coming from the loudspeaker can lead to constructive or destructive interference at certain frequencies which usually results in comb filtering. In this project, this effect has been studied through researching amongst various data sheet provided by different manufacturers, acoustical measurements completed in the large anechoic chamber of the ISVR and some theoretical models developed with MatLab software. If results obtained with MatLab are accurate enough in comparison to the real measurements taken in the anechoic chamber this would lead to a good way to predict which would be the attenuation added to the system at each frequency, given that not all manufacturers provide an attenuation curve, but only an average attenuation. This average attenuation might be useless as sound waves have different wavelengths and its propagation through partitions varies. In fact, sound is composed by high and low frequencies, where high frequencies are characterised by a small wavelength which is usually easier to attenuate than low frequencies that characterised by bigger wavelengths. Furthermore, this information would be of great value to both screen manufacturers, who could offer a much more precise data in their data sheets; and customers, who would have a great amount of information to their disposal before purchasing and installing anything in their cinemas, being able to know by themselves which screen or loudspeaker should be best to meet their expectative. RESUMEN. La aparición de la digitalización de las bandas sonoras para las películas hace posible la mejora en la calidad de sonido de los cines. Sin embargo, un aspecto a tener en cuenta en esta calidad del sonido es la transmisión de éste a través de la pantalla, ya que normalmente tras ella se encuentran situados los altavoces. Las propiedades acústicas varían dependiendo del tipo de pantalla que se utilice, además de haber poca información a la que acceder para poder valorar su comportamiento. A lo largo de este proyecto, se analizan tres muestras de pantallas distintas donadas por distintos fabricantes para poder llegar a la conclusión de dependiendo del tipo de pantalla cuál es la distancia óptima a la que localizar la pantalla respecto al altavoz y con qué inclinación. Dicho análisis se realizó en la cámara anecoica del ISVR (University of Southampton) mediante la construcción de un marco de madera de 2x2 m en el que tensar las pantallas de cine, y un altavoz cuyo comportamiento sea el más similar al de los altavoces de pantalla reales. Los datos se captaron mediante cuatro micrófonos colocados en posiciones distintas y conectados al software Pulse de Brüel & Kjær, a través del cual se obtuvieron las respuestas en frecuencia del altavoz sin pantalla y con ella a diferentes distancias del altavoz. Posteriormente, los datos se analizaron con MatLab donde se calculó la atenuación, el factor de transmisión de la presión (PTF) y el análisis cepstrum. Finalmente, se realizó un modelo teórico del comportamiento de las pantallas perforadas basado en las placas perforadas utilizadas para atenuar el sonido entre distintas habitaciones. Como conclusión se llegó a que las pantallas curvadas son acústicamente más transparentes que las pantallas perforadas que a partir de 6 kHz son más acústicamente opacas. En las pantallas perforadas la atenuación depende del número de perforaciones por unidad de área y el diámetro de éstas. Dicha atenuación se reducirá si se reduce el diámetro de las perforaciones de la pantalla, o si se incrementa la cantidad de perforaciones. Acerca del efecto filtro peine, para obtener la mínima amplitud de éste la pantalla se deberá situar a una distancia entre 15 y 30 cm del altavoz, encontrando a la distancia de 30 cm que la última reflexión analizada a través de Cepstrum llega 5 ms más tarde que la señal directa, por lo cual no debería dañar el sonido ni la claridad del habla.

Caracterización de ambientes sonoros en recintos universitarios: influencia del ruido sobre procesos cognitivos básicos

El interés por el estudio de la problemática del ruido en las escuelas y sus efectos sobre los estudiantes a nivel universitarios, es un tema que no ha sido estudiado debidamente. Desgraciadamente, en el ámbito educativo universitario, no existen regulaciones específicas que permitan determinar parámetros preventivos, ni procedimientos de evaluación de ruido dentro de este tipo de instalaciones educativas. Debido a la importancia de los efectos que el ruido tiene sobre la salud y la calidad de vida de los estudiantes universitarios, y consecuentemente en el rendimiento académico; es de suma importancia desarrollar mecanismos que estudien y planteen soluciones que ayuden a garantizar la mejora de la calidad de vida de la población estudiantil. En este trabajo se ha presentado un extenso trabajo que incluye el estudio de los ambientes sonoros a los que los estudiantes universitarios se ven expuestos día a día y se proponen acciones que ayudan a mejorar la calidad acústica en instalaciones educativas. Así mismo se evidencian los efectos que tiene este contaminante sobre la salud psicológica y por consecuencia en el desarrollo intelectual de los estudiantes. Por un lado, se incluye una propuesta de metodología que ayuda a la correcta caracterización de los ambientes sonoros en los cuales se desarrollan los estudiantes a nivel universitario. Esta se realizó haciendo un completo registro de los niveles sonoros durante sus actividades diarias. Así mismo, una encuesta fue aplicada a estudiantes para conocer la percepción que se tiene sobre las condiciones sonoras en ambientes universitarios. Así mismo, se realizó un estudio de la calidad sonora en instalaciones universitarias, el cual deriva la valoración de la molestia al ruido. Se propone una escala de valoración de molestia al ruido, la cual deriva el diseño de una propuesta con acciones de bajo coste frente al ruido. Por otro lado, se evidencian los trastornos que ocasiona este contaminante sobre la salud psicológica de los estudiantes y que afectan el desarrollo académico de estos. Se realizó primeramente la valoración de la atención y la memoria por medio de test psicométricos estandarizados y otros diseñados para este estudio en particular. Por último, con la finalidad de obtener datos objetivos y confiables que permitieron relacionar la influencia negativa del ruido de fondo sobre procesos cognitivos básicos como la atención y la memoria, se llevó a cabo un estudio de la actividad cerebral. Para llevar a cabo esta evaluación se utilizó como principal herramienta el electroencefalograma (EEG), enfocándose en los cambios producidos con y sin exposición a ruido de fondo, específicamente en las bandas de frecuencia relacionadas con procesos cognitivos básicos como los son la atención y la memoria, en este caso la banda theta (4-7 Hz) y la banda beta (13-30 Hz). ABSTRACT The interest in the study of the problem of noise in schools and its impact on students at university level is a topic that has not been properly studied. Unfortunately, there are no specific regulations for determining preventive parameters or noise assessment procedures in university facilities. Due to the importance of the effects that noise has on health and on the quality of life of university students, and consequently on academic performance; is very important to develop mechanisms to evaluate and design solutions that help ensure an improvement in the quality of life of the student population. This thesis has presented an extensive work, which includes the study of the state of the art on the problem of noise in the sound environments to which university students are exposed every day, and the effects on students mainly on attention aspects. On one hand, a general study of the common noise environments of life of university students was carried out, where a methodological proposal is included and that helps in the correct characterization of the sound environments in which university students grow. This proposal includes the assessment of noise exposure, noise dose and a recording of the characteristic sound levels during their daily activities in and out spaces dedicated to their education. Also, a survey was conducted to know the perception that students have on noise conditions in university environments. Also, a method for evaluation of the noise annoyance is proposed, this is through the correlation of two known methods of evaluation. The first method is based on psychoacoustic parameters that allow the evaluation of the sound quality. These parameters were related, obtaining as a result the parameter known as psychoacoustics annoyance. The second method is based on a questionnaire in conjunction with listening tests in specific sound environments. Derived from the correlation of these two methods, a series of indicators of noise annoyance are proposed, which entails the design of a noise annoyance indicator. Furthermore, the effects of this pollutant on psychological health and therefore in the intellectual development of students has been shown. First, an evaluation of attention and memory using standardized psychometric tests were performed and others designed for this particular study. Because it has been evidenced that the use of these psychometric tests are not very reliable, we sought to obtain another objective and reliable data to show the relationship between the negative influence of background noise on basic cognitive processes such as attention and memory. This was achieved by carrying out a study of the brain activity. To carry out this evaluation the electroencephalogram (EEG) was used as the main tool, focusing on the changes produced with and without exposure to background noise, specifically in the frequency bands related to basic cognitive processes such as attention and are memory. In this case the band theta (4-7 Hz) and beta band (13-30 Hz) were studied. The purpose of this thesis is to establish the bases for future studies that allow go deep in the study of the sound conditions in school environments, and enable the design of strategies and measures against noise and the correct evaluation of the effects of noise on aspects for improving the psychological quality of life and academic performance of students.

Detección de puntos débiles de aislamiento acústico en edificación ya construida

El aislamiento acústico es un problema de difícil solución una vez que la obra ya está acabada. En el caso de que la obra esté finalizada y no se cumplan con los valores de calidad acústicos que nos marca la legislación, deben detectarse los puntos débiles que provocan esa deficiencia de aislamiento acústico. La publicación de catálogos de soluciones constructivas hace que el problema no sea el material elegido, sino cómo se han unido estos materiales entre sí. Por tanto, debe analizarse este problema y buscar mecanismos con los que determinar los puntos débiles. En este trabajo se propone un método para la determinación de caminos débiles de transmisión entre un recinto emisor y un recinto receptor. El método obtiene el índice de reducción vibracional, como indicador de estos caminos débiles. Se muestran en el trabajo varios casos estudiados en el propio edificio, y cómo valorar la transmisión que debilita el aislamiento global de todo el conjunto constructivo.

Non-English-speaking defendants in the magistrates court:a comparative study of face-to-face and prison video link interpreter-mediated hearings in England

This study compares interpreter-mediated face-to-face Magistrates Court hearings with those conducted through prison video link in which interpreters are located in court and non- English-speaking defendants in prison. It seeks to examine the impact that the presence of video link has on court actors in terms of interaction and behaviour. The data comprises 11 audio-recordings of face-to-face hearings, 10 recordings of prison video link hearings, semistructured interviews with 27 court actors, and ethnographic observation of hearings as viewed by defendants in Wormwood Scrubs prison in London. The over-arching theme is the pervasive influence of the ecology of the courtroom upon all court actors in interpretermediated hearings and thus on the communication process. Close analysis of the court transcripts shows that their relative proximity to one another can be a determinant of status, interpreting role, mode and volume. The very few legal protocols which apply to interpretermediated cases (acknowledging and ratifying the interpreter, for example), are often forgotten or dispensed with. Court interpreters lack proper training in the specific challenges of court interpreting, whether they are co-present with the defendant or not. Other court actors often misunderstand the interpreter’s role. This has probably come about because courts have adjusted their perceptions of what they think interpreters are supposed to do based on their own experiences of working with them, and have gradually come to accept poor practice (the inability to perform simultaneous interpreting, for example) as the norm. In video link courts, mismatches of sound and image due to court clerks’ failure to adequately track current speakers, poor image and sound quality and the fact that non-English-speaking defendants in pre-and post-court consultations can see and hear interpreters but not their defence advocates are just some of the additional layers of disadvantage and confusion already suffered by non- English-speaking defendants. These factors make it less likely that justice will be done.