101 resultados para Soldadinho-do-araripe
Resumo:
O Soldadinho-do-araripe – Antilophia bokermanni (Passeriformes, Pipridae) é atualmente o membro mais ameaçado de extinção de sua família, sendo classificado como “criticamente em perigo”. Com uma população estimada em somente 800 indivíduos, está espécie é endêmica de uma pequena área (aproximadamente 30 km²) de floresta úmida de encosta da Chapada do Araripe no nordeste do Brasil. A urgente necessidade de implementação de um programa de conservação efetivo para o Soldadinho-do-araripe tem estimulado muitas pesquisas com diversos aspectos de sua biologia. No presente estudo, nós examinamos variações nas seqüências de segmentos do mtDNA e ncDNA em representantes de A. bokermanni e A. galeata. As análises mostraram nenhuma evidência para subestruturamento populacional e também de história de expansão populacional para A. bokermanni. Sua variabilidade genética é ligeiramente menor quando comparada com a sua espécie-irmã, mas suas similaridades indicam um recente processo de separação, indicado pela retenção de polimorfismo ancestral (separação incompleta de linhagens) em todos os marcadores. Nós também não encontramos nenhuma associação entre variação de plumagem e variações nucleotídicas do gene MC1R no gênero Antilophia. Este estudo representa uma contribuição da genética para o Plano de Conservação do Soldadinho-do-araripe (Antilophia bokermanni).
Resumo:
A Bacia sedimentar do Araripe é uma das mais ricas localidades fossilíferas do mundo e representa algumas das principais fases da evolução tectônica ligadas ao processo de abertura do Atlântico Sul. Essa bacia se subdivide em dois pacotes estratigráficos distintos: o Grupo Cariri (constituído pelas formações Cariri, Missão Velha e Rio Batateiras) e o Grupo Araripe (constituído pelas formações Crato, Ipubi, Santana e Exu). No caso do Grupo Cariri, apenas a Formação Missão Velha (= Brejo Santo para alguns autores) apresenta restos de peixes fósseis. Essa fauna, típica da fase rift da separação da parte oeste do Gondwana, pode ser comparada à ictiofauna já descrita no Grupo Bahia e à fauna encontrada em diversas bacias interiores do Nordeste do Brasil. O presente trabalho constou da realização de coletas na Formação Missão Velha, identificação, preparação e descrição dos espécimes coletados; comparação da paleoictiofauna dessa formação com a de outras bacias de mesma idade; análise da distribuição paleobiogeográfica dos grupos ali presentes. Apesar de desarticulados, foram identificados seis táxons de peixes, assim como fragmentos de teleósteos não identificados. Os táxons identificados a partir do material coletado são: dentes, espinhos cefálicos e espinhos de nadadeira dorsal de Hybodontiformes; escamas, dentes e ossos desarticulados de Lepidotes sp.; escamas de Pleuropholidae; diversos ossos desarticulados de Mawsonia cf. gigas; placa dentária e outros ossos isolados de Ceratodus sp. Essa fauna é muito importante, pois representa uma biota lacustrina do Neocomiano do Brasil, depositada durante os estágios pré-rift/rift da separação do oeste do Gondwana. Durante a fase pré-rift e rift pode ser observada uma correlação estratigráfica entre a Formação Missão Velha e as bacias marginais da África ocidental. Portanto, a biota presente na Formação Missão Velha auxilia a compreensão da diversidade faunística presente nos estágios pré-rift e rift do Brasil e da África.
Resumo:
RESUMO: Com o objetivo de avaliar o desempenho agronômico de genótipos de girassol nas condições edafoclimáticas do primeiro semestre de 2015 na Chapada do Araripe, instalou-se um experimento na Estação Experimental do Instituto Agronômico de Pernambuco (IPA), no município de Araripina, Estado de Pernambuco. O delineamento foi o de blocos ao acaso, com quatro repetições e 13 tratamentos, correspondendo aos genótipos de girassol: M734, NTC 90, BRS G43, BRS G44, BRS G45, BRS G46, SYN 065, HLA 2013, HLA 2014, HLA 2015, HLA 2016, HLA 2017 e SYN 045. Avaliaram-se as seguintes características: sobrevivência final, floração inicial, maturação fisiológica, altura média do capítulo, peso de 1000 aquênios, diâmetro médio dos capítulos, produção final de aquênios, curvatura do capítulo e plantas acamadas, quebradas e atacadas por pássaros. Os genótipos apresentaram diferenças morfoagronômicas quando cultivados no primeiro semestre em condições edafoclimáticas da região do Araripe, com exceção da variável sobrevivência. O genótipo NTC 90 alcançou o maior peso de aquênios. Todos os genótipos, exceto HLA 2015, apresentaram elevado rendimento de grãos. Os caracteres plantas acamadas, quebradas, atacadas por pássaros ou a curvatura do capítulo não foram relacionadas às diferentes cultivares. ABSTRACT: The study aimed to evaluate the agronomic performance of different sunflower genotypes in edaphoclimatic conditions of Araripe region in the first semester of 2015. The experiment was established at the Experimental Station of Instituto Agronômico de Pernambuco (IPA), Araripina, Pernambuco, Brazil. Experimental design was a randomized blocks with thirteen treatments, corresponding to the sunflower genotypes: M734, NTC 90, BRS G43, BRS G44, BRS G45, BRS G46, SYN 065, HLA 2013, HLA 2014, HLA 2015, HLA 2016, HLA 2017 e SYN 045, with four replicates. The following characteristics were evaluated: final survival, early flowering, physiological maturity, average plant height, weight of 1,000 seeds, average flower diameter, final seed production, flower head curvature, lodged, broken and damaged by birds plants. The genotypes showed morphoagronomic differences when grown in the first semester of 2015 on edaphoclimatic conditions of the Araripe region, except for the variable survival. The NTC 90 genotype achieved the highest weight of head flower. All genotypes, except HLA 2015 showed high grain yield. The characters lodged, broken and damaged plants by birds or curvature of the head flower were not related to the different cultivars.
Resumo:
Malaria, also popularly known as maleita , intermittent fever, paludism, impaludism, third fever or fourth fever, is an acute infectious febrile disease, which, in human beings, is caused by four species: Plasmodium falciparum, P. vivax, P. malariae and P. ovale. Malaria, one of the main infectious diseases in the world, is the most important parasitoses, with 250 million annual cases and more than 1 million deaths per year, mainly in children younger than live years of age. The prophylactic and therapeutic arsenal against malaria is quite restricted, since all the antimalarials currently in use have some limitation. Many plant species belonging to several families have been tested in vivo, using the murine experimental model Plasmodium berghei or in vitro against P. falciparum, and this search has been directed toward plants with antithermal, antimalarial or antiinflammatory properties used in popular Brazilian bolk medicine. Studies assessing the biological activity of medicinal plant essential oils have revealed activities of interest, such as insecticidal, spasmolytic and antiplasmodic action. It has also been scientifically established that around 60% of essential oils have antifungal properties and that 35% exhibit antibacterial properties. In our investigation, essential oils were obtained from the species Vanillosmopsis arborea, Lippia sidoides and Croton zethneri which are found in the bioregion of Araripe-Ceará. The chemical composition of these essential oils was partially characterized and the presence of monoterpenes and sesquiterpenes. The acute toxicity of these oils was assessed in healthy mice at different doses applied on a single day and on four consecutive days, and in vitro cytotoxicity in HeLa and Raw cell lines was determined at different concentrations. The in vivo tests obtained lethal dose values of 7,1 mg/Kg (doses administered on a single day) and 1,8 mg/Kg (doses administered over four days) for 50% of the animals. In the in vitro tests, the inhibitory concentration for 50% of cell growth in Hela cell lines was 588 μg/mL (essential oil from C. zethneri after 48 h), from 340-555 μg/mL (essential oil from L. sidoides, after 24 and 48 h). The essential oil from V. arborea showed no cytotoxicity and none of the essential oils were cytotoxic in Raw cell lines. These data suggest a moderate toxicity in the essential XVIII oils under study, a finding that does not impede their testing in in vivo antimalarial assays. Was shown the antimalarial activity of the essential oils in mice infected with P. berghei was assessed. The three species showed antimalarial activity from 36%-57% for the essential oil from the stem of V. arborea; from 32%-82% for the essential oil from the leaves of L. sidoides and from 40%-70% of reduction for the essential oil from the leaves of C. zethneri. This is the first study showing evidence of antimalarial activity with these species from northeast Brazil. Further studies to isolate the active ingredients of these oils are needed to determine if a single active ingredient accounts for the antimalarial activity or if a complex integration of all the compounds present occurs, a situation reflected in their biological activity
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Arbuscular mycorrhizal fungi (AMF) are obligatory symbiotic organisms that associate with roots of a large number of plant taxa, and are found in all terrestrial ecosystems. These fungi promote greater tolerance to environmental stresses to associated plant, favoring the establishment of plant communities, especially where soil fertility is a limiting factor, as in the Caatinga, an exclusively Brazilian domain that has been focus of research due to its great biodiversity that can help clarify the history of vegetation in South America. Because of the ecological importance of AMF, the limited number of jobs and the potential diversity of the Caatinga, this work aims to inventory the diversity and determine AMF communities in areas with different faces occurrent in FLONA Araripe, Ceará (CE). The sample collection occurred in four periods at the beginning and end of the dry season (August and December 2011, respectively) and rainy (February and June 2012, respectively) in an area of marsh and woodland altitude of the Araripe, Crato, CE. The glomerosporos were extracted by wet sieving and centrifugation in water and sucrose (50%) mounted between slide and coverslip using PVLG and PVLG + Reagent Melzer. In total, we found 46 species of AMF distributed in eight families and 16 genera: Acaulospora (6), Ambispora (1), Cetraspora (2), Dentiscutata (5), Fuscutata (2), Gigaspora (6), Glomus (13) Intraornatospora (1), Kuklospora (1), Orbispora (1), Paradentiscutata (1), Quatunica (1), Racocetra (1), Scutellospora (2), Septoglomus (2) and a new genus. analysis showed that ecological each area of study has its own seasonal dynamics, with an area of woodland with a greater diversity of species throughout the year, while the marsh elevation showed greater variation in species found among the collection periods, showing that vegetation and rainfall has strong influence on the seasonal dynamics of AMF, as well as the availability of nutrients and soil pH so
Resumo:
This study has as a main objective to make a detailed stratigraphic analysis of the Aptian-Albian interval in the east part of Araripe Basin, NE of Brazil which correspond, litostratigraphically, to Rio Da Batateira, Crato, Ipubi and Romualdo formations. The stratigraphic analysis was based on three different stages, the 1D, 2D and 3D analysis; these ones were adapted to the sequence stratigraphy concepts in order to create a chronostratigraphic framework for the study area within the basin. The database used in the present study contains field and well information, wells that belong to Santana Project, carried out by the Ministério de Minas e Energia- DNPM- CPRM from 1977 to 1978. The analysis 1D, which was done separately for each well and outcrop allowed the recognition of 13 sedimentary facies, mainly divided based on predominant litologies and sedimentary structures. Such facies are lithologically represented by pebble, sandstones, claystones, margas and evaporates; these facies are associated in order to characterize different depositional systems, that integrate from the continental environment (fluvial system and lacustre), paralic system (delta system and lagunar) to the marine environment (shelfenvironment). The first one, the fluvial system was divided into two subtypes: meandering fluvial system, characterized by fill channel and floodplain deposits; the facies of this system are associated vertically according to the textural thinning upward cycles (dirting-up trend pattern in well logs). Lacustrine environment is mainly related with the lithotypes of the Crato Formation, it shows a good distribution within the basin, been composed by green claystone deposits and calcareous laminated. Deltaic System represented by prodelta and delta front deposits which coarsening upward tendency. Lagunar system is characterised by the presence of anhydrite and gypsum deposits besides the black claystone deposits with vegetal fragments which do not contain a fauna typically marine. The marine platform system is composed by successions of black and gray claystone with fossiliferous fauna of Dinoflagellates (Spiniferites Mantell, Subtilisphaera Jain e Subtilisphaera Millipied genre) typical of this kind of depositional system. The sedimentary facies described are vertically arranged in cycles with progradational patterns which form textural coersening upward cycles and retrogradational, represented by textural thinning dowward cycles. Based in these cycles, in their stack pattern and the vertical change between these patterns, the systems tracks and the depositional sequences were recognized. The Low System Track (LST) and High System Track (HST) are composed by cycles with progradational stack pattern, whereas the Trangessive System Track (TST) is composed by retrogradational stack pattern cycles. The 2D stratigraphic analysis was done through the carrying out of two stratigraphic sections. For the selection of the datum the deepest maximum flooding surface was chosen, inside the Sequence 1, the execution of these sections allowed to understand the behaviour of six depositional systems along the study area, which were interpreted as cycles of second order or supercycles (cycles between 3 and 10 Ma), according to the Vail, et al (1977) classification. The Sequence 1, the oldest of the six identified is composed by the low, transgressive and high systems tracks. The first two system tracks are formed exclusively by fluvial deposits of the Rio da Batateira Formation whereas the third one includes deltaic and lacustrine deposits of the Crato Formation. The sequences 2 and 3 are formed by the transgressive systems tracks (lake spreading phase) and the highstand system track (lake backward phase). The TST of these sequences are formed by lacustrine deposits whereas HST contains deltaic deposits, indicating high rates of sedimentary supply at the time of it s deposition. The sequence 4 is composed by LST, TST and HST, The TST4 shows a significant fall of the lake base level, this track was developed in conditions of low relation between the creation rate of space of accommodation and the sedimentary influx. The TST4 marks the third phase of expansion of the lacustrine system in the section after the basin´s rift, the lacustrine system established in the previous track starts a backward phase in conditions that the sedimentary supply rate exceeds the creation rate of space accommodation. The sequence 5 was developed in two different phases, the first one is related with the latest expansion stage of the lake, (TST5), the basal track of this sequence. In this phase the base level of the lake rose considerably. The second phase (related to the TST5) indicates the end of the lacustrine domain in the Araripe Basin and the change to lagunar system ant tidal flat, with great portions in the supratidal. These systems were formed by restricted lagoons, with shallow level of water and with intermittent connections with the sea. This, was the phase when the Araripe Basin recorded the most several arid conditions of the whole interval studied, Aptian Albian, conditions that allow the formation of evaporitic deposits. The sequence 6 began its deposition after a significant fall of the sea (LST6). The sequence 6 is without any doubtlessly, the sequence that has deposits that prove the effective entrance of the sea into the Araripe Basin. The TST6, end of this sequence, represents the moment which the sea reaches its maximum level during the Aptian Albian time. The stratigraphic analysis of the Aptian Albian interval made possible the understanding that the main control in the development of the depositional sequences recognized in the Araripe Basin were the variations of the local base level, which are controlled itself by the climate changes
Resumo:
A complex depositional history, related to Atlantic rifting, demonstrates the geological evolution during the late Jurassic and early Neocomian periods in the Araripe Basin NE Brazil. Based on outcrop, seismic and remote sensing data, a new model of the tectono-stratigraphic evolution of the section that covers the stages Dom João, Rio da Serra and Aratu (Brejo Santo, Missão Velha and Abaiara formations) is presented in this paper. In the stratigraphic section studied, ten sedimentary facies genetically linked to nine architectural elements were described, representing depositional systems associated with fluvial, aeolian and deltaic environments. Based on the relationship between the rates of creation of accommodation space and sediment influx (A / S) it was possible to associate these depositional systems with High and Low accommodation system tracks. These system tracks represent two tectono-sequences, separated by regional unconformities. The Tectono-sequence I, which includes lithotypes from the Brejo Santo Formation and is related to the pre-rift stage, is bounded at the base by the Paleozoic unconformity. This unit represents only a High Accommodation System Track, composed by a succession of pelitic levels interbedded with sandstones and limestones, from a large fluvial floodplain origin, developed under arid climatic conditions. The Tectono-sequence II, separated from the underlying unit by an erosional unconformity, is related to the rift stage, and is composed by the Missão Velha and Abaiara Formation lithotypes. Changes in depositional style that reflect variations in the A / S ratio, and the presence of hydroplastic deformation bands, make it possible to divide this tectonosequence into two internal sequences. Sequence IIA, which includes the lower portion of the Missão Velha Formation and sequence IIB, is composed by the upper section of the Missão Velha and Abaiara Formations The Sequence IIA below, composed only by the Low Accommodation System Track, includes crossbedding sandstones interbedded with massive mudstones, which are interpreted as deposits of sandy gravel beds wandering rivers. Sequence IIB, above, is more complex, showing a basal Low Accommodation System Track and a High Accommodation System Track at the top, separated by an expansion surface. The lower System Track, related to the upper portion of the Missão Velha Formation, is composed by a series of amalgamated channels, separated by erosion surfaces, interpreted as deposits of a belt of braided channels. The High Accommodation System Track, correlated with the Abaiara Unit, is marked by a significant increase in the A / S, resulting in the progradation of a system of braided river deltas with aeolic influence. Regarding tectonic evolution, the stratigraphic study indicates that the Tectonosequence Rift in the Araripe basin was developed in two phases: first characterized by a beginning of rifting, related to Sequence IIA, followed by a phase of syndepositional deformation, represented by sequence IIB. The first phase was not influenced by the development of large faults, but was influenced by a sharp and continuous decrease of accommodation space that permitted a change in depositional patterns, establishing a new depositional architecture. In turn, the stage of syndepositional deformation allowed for the generation of enough accommodation space for the preservation of fluvial-lacustrine deposits and conditioned the progradation of a braided river-dominated delta system.
Resumo:
The Palestina Graben is one of the NE-trending asymmetric grabens of the Araripe Basin. This basin rests on the precambrian terrains of the Transversal Zone, Borborema Province, immediately to the south of the Patos Lineament. It is part of the Interior Basins province of Northeastern Brazil, being related to the fragmentation of the Gondwana supercontinent and the opening of the South Atlantic ocean. The Palestina Graben trends NE-SW and presents an asymmetric geometry, controled by the NW extensional eocretaceous strain. The graben borders display distinct geometries. The SE border is a flexural margin, characterized by the non conformity of the eopaleozoic Mauriti Formation (the oldest unit of the basin) overlying the crystalline basement, but also affected by normal faults with small displacements. On the opposite, the NW border is continuous and rectilinear, being marked by normal faults with major displacements, that control the general tilting of the layers to the NW. In this sense, the Mauriti Formation is overlain by the Brejo Santo, Missão Velha (which also occurs in the Brejo Santo-Mauriti horst, to the NW of the fault border) and Abaiara formations, the latter restricted to the graben. The interpretation of available gravity data and a seismic line indicates that the main fault has a variable dip slip component, defining two deeper portions within the graben, in which the sedimentary column can reach thicknesses of up to 2 km. Regarding to the stratigraphy of Araripe Basin in the study area, the sedimentary package includes three distinct tectonosequences. The Paleozoic Syneclisis Tectonosequence is composed by the Mauriti Formation, deposited by a braided fluvial system. The Jurassic Tectonosequence, whose tectonic setting is still debatable (initial stage of the Neocomian rift, or a pre-rift syneclisis ?), is represented by the Brejo Santo Formation, originated in a distal floodplain related to ephemeral drainages. The Rift Tectonosequence, of neocomian age, includes the Missão Velha Formation, whose lower section is related to a braided to meandering fluvial system, outlining the Rift Initiation Tectonic Systems Tract. The upper section of the Missão Velha Formation is separated from the latter by a major unconformity. This interval was originated by a braided fluvial system, overlain by the Abaiara Formation, a deltaic system fed by a meandering fluvial system. Both sections correspond to the Rift Climax Tectonic Systems Tract. In the area, NE-trending normal to oblique faults are associated with NW transfer faults, while ENE to E-W faults display dominant strike slip kinematics. Both NE and E-W fault sets exhibit clear heritage from the basement structures (in particular, shear zones), which must have been reactivated during the eocretaceous rifting. Faults with EW trends display a dominant sinistral shear sense, commonly found along reactivated segments of the Patos Lineament and satellyte structures. Usually subordinate, dextral directional movements, occur in faults striking NNW to NE. Within this framework bearing to the Palestina Graben, classical models with orthogonal extension or pull-apart style deserve some caution in their application. The Palestina Graben is not limited, in its extremeties, by E-W transcurrent zones (as it should be in the case of the pull-apart geometry), suggesting a model close to the classic style of orthogonal opening. At the same time, others, adjacent depocenters (like the Abaiara-Jenipapeiro semi-graben) display a transtensional style. The control by the basement structures explains such differences
Resumo:
The Araripe Basin is located over Precambrian terrains of the Borborema Province, being part of Northeast Brazil inner basins. Its origin is related to the fragmentation of the Gondwana supercontinent and consequently opening of South Atlantic during early Cretaceous. The basin has a sedimentary infill encompassing four distinct evolution stages, comprising Paleozoic syneclisis, pre-rift, rift and post-rift. The target of this study comprises the post-rift section of the basin focusing deformational styles which affect evaporates from Ipubi Member of the Santana Formation, which is composed by gypsum and anidrite layers interbedded with shales. These units occur widespread across the basin. In the central part of the basin, near Nova Olinda-Santana do Cariri, evaporites are affected by an essentialy brittle deformation tipified by fibrous gypsum filled fractures, cutting massive layers of gypsum and anidrite. Veins with variable orientations and dips are observed in the region distributed over three main populations: i) a dominant NWSE with shallow to moderate NE dipping population, consisting of gypsum filled veins in which fibers are normal to vein walls; i) NE-SW veins with moderate SE dips containing subhorizontal growth fibers; and iii) N-S veins with shallow E-W dips with fibers oblique to vein walls. In the west portion of the basin, near Trindade-Ipubi-Araripina towns, evaporate layers are dominantly constituted by gypsum/anidrite finely stratified, showing a minor density of veins. These layers are affected by a unique style of deformation, more ductile, typified by gentle to open horizontal normal folding with several tens of meters length and with double plunging NW-SE or NE-SW hinges, configuring domic features. In detail, gypsum/anidrite laminae are affected by metre to decimeter scale close to tight folding, usually kinked, with broken hinges, locally turning into box folds. Veins show NE-SW main directions with shallow NE dips, growth fibers are parallel to vein walls, constituting slickenfibers. This region is marked by faults that affect Araripina Formation with NW-SE, NE-SW and E-W directions. The main structural styles and general orientations of structures which affected the post-rift section of Araripe Basin yielded important kinematic information analysis which led us to infer a E-W to NE-SW extension direction to the northeastern part of the Basin, whereas in the southeastern part, extension occurred in N-S direction. Thus, it was possible to determine a regional kinematic setting, through this analysis, characterizing a NE-SW to ENE-WSW system for the post-rift section, which is compatible with the tension settings for the Sout American Plate since Albian. Local variations at the fluid pressure linked (or not) to sedimentary overload variation define local tension settings. This way, at the northeastern portion of the basin, the post-rift deformation was governed by a setting which σ 1 is sub-horizontal trending NE-SW and, σ 3 is sub-vertical, emphasizing a reverse fault situation. At the southwestern portion however there was characterized a strike slip fault setting, featuring σ 1 trending ENEWSW and σ3 trending NNW-SSE
Resumo:
This thesis presents diagenetic and provenance studies of sandstones belonging to the Rift Tectonosequence of the Rio do Peixe and Araripe basins. These basins are located in the interior of Northeast Brazil aligned along the Trend-Cariri Potiguar. Their origin is related to the Early Cretaceous rifting event. In terms of lithostratigraphy, the studied section corresponds to the Antenor Navarro, Sousa and Rio Piranhas formations of the Rio do Peixe Basin, and the Missão Velha and Abaiara formations of the Araripe Basin, outcropping in the central-west Cariri Valley. A facies analysis was performed and identified nine distinct sedimentary facies for the Rio de Peixe Basin and ten sedimentary facies for the Araripe Basin, individualized according to the different rock types and their sedimentary structures. These facies associations to led paleoenvironments interpretations and their vertical succession allowed understanding the evolution of the depositional setting during the cronostratigraphic interval studied in these basins. Based on petrographic and diagenetic studies it was possible to characterize the texture and mineralogy of these sandstones, identifying their diagenetic stage and the grain framework provenance. The petrographic study allowed to classify the lithotypes studied in both basins as quartzarenites. Such quartzarenites, in general, are rich in quartz, feldspar and lithic fragment grains, and at accessory levels tourmaline, sphene, zircon, epidote and other mineralogy. The diagenetic history of the studied rocks proved to be very complex, being characterized by a variety mineral of phases that succeeded each other during the eo, meso and telodiagenetic stages. According to the studied formation and the textural and compositional aspects of the rocks, some processes were more or less active, while others were even absent. The eodiagenetic stage is marked by mechanical infiltration of clays and early mechanical compactional processes. The mesodiagenetic phase is characterized by continuity of the mechanical compaction and the beggining of chemical compaction, with quartz and feldspar overgrowths, precipitation of kaolinite, alteration of framework grains to chlorite and illite, and finally, precipitation of opaque minerals. The telodiagenetic stage is represented by the oxidation of some grains, matrix and cements. For the provenance analysis of the studied sandstones were used ternary diagrams whose vertices correspond to the percentage of quartz, feldspar and lithic fragments. This study allowed identifies the source area of these rocks as continental blocks. It was also possible, based on the chemical stability and mineralogical maturity of the rocks, recognize that the Antenor Navarro Formation of the Rio do Peixe Basin, and the upper section of the Missão Velha Formation of Araripe Basin have less maturity and stability when compared with the other studied formations
Resumo:
Deformation bands are structures, developed in porous sandstones, that has small offsets and they are not shown on seismic section. The deformation bands of the pre and synrift sandstones of Araripe Basin were studied in outcrop, macroscopic and microscopic scales. The hierarchical, cinematic and spatial-geometric characteristics, and also the deformational mechanisms acting during its structural evolution were established too. In general, the mesoscopic scale observation allowed to discriminate deformation bands as singles or clusters in three main sets: NNE-SSW dextral; NE-SW normal (sometimes with strike-slip offset); and E-W sinistral; further a bed-parallel deformation bands as a local set. The microscopic characterization allowed to recognize the shearing and cataclastic character of such structures. Through the multi-scale study done in this work we verified that deformation bands analyzed were preferentially developed when sandstones under advanced stage of lithification. We also infer that the geometrical-spatial complexity of these bands, together with the presence of cataclastic matrix, can difficult the migration of fluids in reservoir rocks, resulting on their compartmentalization. Therefore, the study of deformation bands can aid researches about the structural evolution of sedimentary basin, as well as collaborate to understand the hydrodynamic behavior of reservoirs compartmented by these deformational structures
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The Rio da Batateira e Santana formations, the latter with Crato, Ipubi and Romualdo members (Alagoas Stage, Aptian), were studied in four cored and logged wells from the eastern portion of Araripe Basin, Northeastern Brazil. The investigated section is 230 m-thick, and PS-14 well is the most representative, because it is the only one which sampled the evaporites of Ipubi Member. Nine facies cycles were identified, being formed by siliciclastics (estuarine, deltaic and lacustrine), mixed lithologies (lacustrine), carbonates, black shales and marls (lacustrine), and gypsum-anhydrite (lacustrine evaporite). The ordering of facies cycles furnished six depositional sequences. They were formed by siliciclastic, regressive-transgressive R-T cycles (S1 and S4, corresponding to Rio da Batateira Formation and to Santana Formation/Romualdo Member), by siliciclastics and carbonates, R-T cycles (S2, S3.1 and S3.2, corresponding to Crato Member), and by siliciclastic-carbonate, R-T cycles followed by evaporitic cycles (S3.3, referred to Ipubi Member). The last cycles correspond to concentration-dilution, C-D cycles of marine brines, which precipitated gypsum in the restricted lacustrine basin.