Different responses in bulk density and saturated hydraulic conductivity to soil deformation by logging machinery on a Ferralsol under native forest

Ferralsols have high structural stability, although structural degradation has been observed to result from forest to tillage or pasture conversion. An experimental series of forest skidder passes in an east Amazonian natural forest was performed for testing the effects of mechanical stress during selective logging operations on a clay-rich Ferralsol under both dry and wet soil conditions. Distinct ruts formed up to 25 cm depth only under wet conditions. After nine passes the initially very low surface bulk density of between 0.69 and 0.80 g cm(-3) increased to 1.05 g cm(-3) in the wet soil and 0.92 g cm(-3) in the dry soil. Saturated hydraulic conductivities, initially > 250 mm h(-1), declined to a minimum of around 10 mm h(-1) in the wet soil after the first pass, and in the dry soil more gradually after nine passes. The contrasting response of bulk density and saturated hydraulic conductivity is explained by exposure of subsoil material at the base of the ruts where macrostructure rapidly deteriorated under wet conditions. We attribute the resultant moderately high hydraulic conductivities to the formation of stable microaggregates with fine sand to coarse silt textures. We conclude that the topsoil macrostructure of Ferralsols is subject to similar deterioration to that of Luvisols in temperate zones. The stable microstructure prevents marked compaction and decrease in hydraulic conductivity under wetter and more plastic soil conditions. However, typical tropical storms may regularly exceed the infiltration capacity of the deformed soils. In the deeper ruts water may concentrate and cause surface run-off, even in gently sloping areas. To avoid soil erosion, logging operations in sloping areas should therefore be restricted to dry soil conditions when rut formation is minimal.

The response of piled buildings to deep excavations

This paper explores the influence of the piled foundation on the building response to excavation-induced deformations. The influence of the type of foundation, the position of positive and negative skin friction zones, and the flexibility of the piles is evaluated with respect to both horizontal and vertical soil deformations. Case histories from the Netherlands are included from Amsterdam (North South Line) and Rotterdam (a building adjacent to the Willemspoortunnel). Most of the buildings are founded on timber piles ranging in length from 12-17 m. Conclusions are drawn about the interaction between the piled building and the soil deformation. © 2012 Taylor & Francis Group.

盐渍土的增湿剪切变形特性

盐渍土在浸水后由于盐分的溶解,对土体的强度产生较大的影响。在以往的研究中,主要以饱和与非饱和土体的强度比较来说明水对强度的影响,没有研究在部分浸水后土体的变形和强度的变化规律。针对这一点,在参考黄土增湿剪切方法的基础上研究了盐渍土的增湿剪切变形特性,探讨了垂直压力、干密度和剪应力水平对剪切变形量的影响规律。

花岗岩风化土微观结构及其工程地质特性研究

Saprolite is the residual soil resulted from completely weathered or highly weathered granite and with corestones of parent rock. It is widely distributed in Hong Kong. Slope instability usually happens in this layer of residual soil and thus it is very important to study the engineering geological properties of Saprolite. Due to the relic granitic texture, the deformation and strength characteristics of Saprolite are very different from normal residual soils. In order to investigate the effects of the special microstructure on soil deformation and strength, a series of physical, chemical and mechanical tests were conducted on Saprolite at Kowloon, Hong Kong. The tests include chemical analysis, particle size analysis, mineral composition analysis, mercury injection, consolidation test, direct shear test, triaxial shear test, optical analysis, SEM & TEM analysis, and triaxial shear tests under real-time CT monitoring.Based on the testing results, intensity and degree of weathering were classified, factors affecting and controlling the deformation and strength of Saprolite were identified, and the interaction between those factors were analyzed.The major parameters describing soil microstructure were introduced mainly based on optical thin section analysis results. These parameters are of importance and physical meaning to describe particle shape, particle size distribution (PSD), and for numerical modeling of soil microstructure. A few parameters to depict particle geometry were proposed or improved. These parameters can be used to regenerate the particle shape and its distribution. Fractal dimension of particle shape was proposed to describe irregularity of particle shapes and capacity of space filling quantitatively. And the effect of fractal dimension of particle shape on soil strength was analyzed. At the same time, structural coefficient - a combined parameter which can quantify the overall microstructure of rock or soil was introduced to study Saprolite and the results are very positive. The study emphasized on the fractal characteristics of PSD and pore structure by applying fractal theory and method. With the results from thin section analysis and mercury injection, it was shown that at least two fractal dimensions Dfl(DB) and Df2 (Dw), exist for both PSD and pore structure. The reasons and physical meanings behind multi-fractal dimensions were analyzed. The fractal dimensions were used to calculate the formation depth and weathering rate of granite at Kowloon. As practical applications, correlations and mathematical models for fractal dimensions and engineering properties of soil were established. The correlation between fractal dimensions and mechanical properties of soil shows that the internal friction angle is mainly governed by Dfl 9 corresponding to coarse grain components, while the cohesion depends on Df2 , corresponding to fine grain components. The correlations between the fractal dimension, friction angle and cohesion are positive linear.Fractal models of PSD and pore size distribution were derived theoretically. Fragmentation mechanism of grains was also analyzed from the viewpoint of fractal. A simple function was derived to define the theoretical relationship between the water characteristic curve (WCC) and fractal dimension, based on a number of classical WCC models. This relationship provides a new analytical tool and research method for hydraulic properties in porous media and solute transportation. It also endues fractal dimensions with new physical meanings and facilitates applications of fractal dimensions in water retention characteristics, ground water movement, and environmental engineering.Based on the conclusions from the fractal characteristics of Saprolite, size effect on strength was expressed by fractal dimension. This function is in complete agreement with classical Weibull model and a simple function was derived to represent the relationship between them.In this thesis, the phenomenon of multi-fractal dimensions was theoretically analyzed and verified with WCC and saprolite PSD results, it was then concluded that multi-fractal can describe the characteristics of one object more accurately, compared to single fractal dimension. The multi-fractal of saprolite reflects its structural heterogeneity and changeable stress environment during the evolution history.

Efeitos da roda compactadora de semeadoras sob cargas verticais na deformação do solo com dois teores de água

O presente trabalho foi conduzido na Pista de Ensaios de Semeadura do Laboratório de Máquinas e Mecanização Agrícola (LAMMA) da UNESP/Jaboticabal - SP, para o estudo da ação da roda compactadora de semeadoras sob cargas verticais, na deformação do solo, com dois teores de água. Os tratamentos consistiram da combinação de dois teores de água e seis cargas verticais, totalizando 12 tratamentos, com três repetições, em dois ensaios, analisando-se a resistência mecânica do solo à penetração e a deformação do solo provocada pela roda compactadora. A roda compactadora utilizada era de alumínio, com massa de 6,4 kg, 40 cm de diâmetro e 10 cm de largura, sob a ação de cargas verticais de 63; 161; 259; 357; 455 e 553 N, obtidas acoplando-se lastros de chumbo sobre a roda compactadora, sendo os teores de água do solo de 15,4 e 9,2%. Os resultados permitem concluir que o teor de água do solo tem grande influência na deformação e compactação do solo, que aumentam proporcionalmente com as cargas verticais sobre a roda compactadora, e que, quanto maior o teor de água do solo, mais suscetível o mesmo fica à compactação e deformação.

Influência dos constituintes do esgoto no colapso de um solo arenoso

Este trabalho analisa o comportamento colapsível de um solo tropical arenoso inundado com diferentes fluidos de saturação que constituem o esgoto doméstico. Para tal análise, foram levados em consideração parâmetros físicos e químicos e aspectos estruturais do solo no âmbito do fenômeno da colapsibilidade dos solos, assim como as principais características dos fluidos de inundação de água destilada, esgoto doméstico e algumas soluções à base de substâncias que compõem os esgotos e as deformações axiais do solo a um metro de profundidade em ensaios edométricos. As propriedades físicas e químicas dos fluidos de inundação e dos solos, bem como a combinação entre tais propriedades, desempenham relevante papel na compreensão do fenômeno do colapso, mostrando que a sua ocorrência não pode ser atribuída a um ou outro parâmetro do solo ou do fluido isoladamente.

Ensaios triaxiais dinamicos sobre amostras indeformadas de um solo colapsivel

Tests were carried out with samples from two depths of a vertical soil profile. The results indicate that the permanent deformation characteristics of the soil are dependent on their depth in the vertical profile and on their water content. Some practical consequences to the performance of the pavement were considered.

Desenvolvimento de um perfilômetro laser para determinação da área e volume de contato entre o pneu e o solo: Cristiano Alberto de Paula. -

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)