Ohjelmistoalan PK-yrityksen tuotekehityksen suorituskyvyn mittaaminen

Tämän työn tarkoituksena oli kehittää suorituskykymittariston rakentamisen malli, jossa otetaan huomioon PK-yrityksen sekä ohjelmistokehitystyön erityispiirteet. Työssä käytiin ensin läpi teoriaa aiheesta, jonka jälkeen rakennettiin mittaristo kohdeyritykseen. Näiden pohjalta rakennettiin malli, jonka avulla PK-ohjelmistoyrityksen tuotekehitysorganisaatiolle voidaan rakentaa toimiva suorituskyvyn mittaristo. Tutkimusote on konstruktiivinen. Työssä tarkasteltiin suorituskyvyn määritelmän ja mittaamisen kehitystä. Käytiin läpi erilaisia olemassa olevia tasapainotettuja malleja sekä hyvien mittareiden ominaisuuksia. Teoriassa tutustuttiin myös PK-yritysten mittaamiseen, asiantuntijoiden mittaamisen erityispiirteisiin sekä ohjelmistotyön erityispiirteisiin. Tuloksena syntyi malli, jossa tasapaino syntyi eri näkökulmien kautta, mutta myös subjektiivisten ja objektiivisten mittareiden kautta. Mallin mukaan syntyneillä objektiivisilla ja subjektiivisilla mittareilla on eri käyttötarkoitukset. Kuten teoriassakin havaittiin, subjektiiviset mittarit sopivat paremmin johtoryhmän raportointiin, kun taas objektiiviset mittarit ovat toimivampia asiantuntijoiden mittaamisessa.

Integrating open source codes for solid modeling and automatic mesh generation in FEM applications

The applications of the Finite Element Method (FEM) for three-dimensional domains are already well documented in the framework of Computational Electromagnetics. However, despite the power and reliability of this technique for solving partial differential equations, there are only a few examples of open source codes available and dedicated to the solid modeling and automatic constrained tetrahedralization, which are the most time consuming steps in a typical three-dimensional FEM simulation. Besides, these open source codes are usually developed separately by distinct software teams, and even under conflicting specifications. In this paper, we describe an experiment of open source code integration for solid modeling and automatic mesh generation. The integration strategy and techniques are discussed, and examples and performance results are given, specially for complicated and irregular volumes which are not simply connected. © 2011 IEEE.

Agile user stories enriched with usability

Usability is a critical quality factor. Therefore, like traditional software teams, agile teams have to address usability to properly catch their users experience. There exists an interesting debate in the agile and usability communities about how to achieve this integration. Our aim is to contribute to this debate by discussing the incorporation of particular usability recommendations into user stories, one of the most popular artifacts for communicating agile requirements. In this paper, we explore the implications of usability for both the structure of and the process for defining user stories. We discuss what changes the incorporation of particular usability issues may introduce in a user story. Although our findings require more empirical validation, we think that they are a good starting point for further research on this line.

The effects of Kanban in software development teams : a study of the implementation at Sandvik

In software development organizations there is sometimes a need for change. In order to meet continuously increasing demands from their customers, Sandvik IT Services- SITS, at Sandvik in Sweden, required improving the way they worked with software development. Due to issues like a lot of work in progress and lot of simultaneous tasks for individuals in the teams that caused stress, it was almost impossible to address the question of working with improvements. In order to enable the improvement process Kanban was introduced in the software development teams. Kanban for software development is a change method created by David J. Anderson. The purpose of this thesis is twofold. One part is to assess what effects Kanban has had on the software development teams. The other part is to make a documentation of the Kanban implementation process at SITS. The documentation has been made on the basis of both company internal resources and observations of the Kanban implementation process. The effects of Kanban have been researched with an interview survey to the teams that have gone through the Kick start of the Kanban process. The result of the thesis is also twofold. One part of the result is an extensive documentation of the implementation process of Kanban at SITS. The other part is an assessment of the effects that Kanban has had at SITS. The major effects have been that the teams are experiencing less stress, more focus on quality and better customer collaboration. It is also evident is that it takes time for some effects to evolve when implementing Kanban

An integrated approach of software development and test processes to distributed teams

The Distributed Software Development (DSD) is a development strategy that meets the globalization needs concerned with the increase productivity and cost reduction. However, the temporal distance, geographical dispersion and the socio-cultural differences, increased some challenges and, especially, added new requirements related with the communication, coordination and control of projects. Among these new demands there is the necessity of a software process that provides adequate support to the distributed software development. This paper presents an integrated approach of software development and test that considers distributed teams peculiarities. The approach purpose is to offer support to DSD, providing a better project visibility, improving the communication between the development and test teams, minimizing the ambiguity and difficulty to understand the artifacts and activities. This integrated approach was conceived based on four pillars: (i) to identify the DSD peculiarities concerned with development and test processes, (ii) to define the necessary elements to compose the integrated approach of development and test to support the distributed teams, (iii) to describe and specify the workflows, artifacts, and roles of the approach, and (iv) to represent appropriately the approach to enable the effective communication and understanding of it.

Atratividade de projetos de software livre: importância teórica e estratégias para administração

Thousands of Free and Open Source Software Projects (FSP) were, and continually are, created on the Internet. This scenario increases the number of opportunities to collaborate to the same extent that it promotes competition for users and contributors, who can guide projects to superior levels, unachievable by founders alone. Thus, given that the main goal of FSP founders is to improve their projects by means of collaboration, the importance to understand and manage the capacity of attracting users and contributors to the project is established. To support researchers and founders in this challenge, the concept of attractiveness is introduced in this paper, which develops a theoretical-managerial toolkit about the causes, indicators and consequences of attractiveness, enabling its strategic management.

Evaluation of three brands of drug interaction software for use in intensive care units

Objective To evaluate drug interaction software programs and determine their accuracy in identifying drug-drug interactions that may occur in intensive care units. Setting The study was developed in Brazil. Method Drug interaction software programs were identified through a bibliographic search in PUBMED and in LILACS (database related to the health sciences published in Latin American and Caribbean countries). The programs` sensitivity, specificity, and positive and negative predictive values were determined to assess their accuracy in detecting drug-drug interactions. The accuracy of the software programs identified was determined using 100 clinically important interactions and 100 clinically unimportant ones. Stockley`s Drug Interactions 8th edition was employed as the gold standard in the identification of drug-drug interaction. Main outcome Sensitivity, specificity, positive and negative predictive values. Results The programs studied were: Drug Interaction Checker (DIC), Drug-Reax (DR), and Lexi-Interact (LI). DR displayed the highest sensitivity (0.88) and DIC showed the lowest (0.69). A close similarity was observed among the programs regarding specificity (0.88-0.92) and positive predictive values (0.88-0.89). The DIC had the lowest negative predictive value (0.75) and DR the highest (0.91). Conclusion The DR and LI programs displayed appropriate sensitivity and specificity for identifying drug-drug interactions of interest in intensive care units. Drug interaction software programs help pharmacists and health care teams in the prevention and recognition of drug-drug interactions and optimize safety and quality of care delivered in intensive care units.

Frameworks no desenvolvimento de software: o caso da Elevation da PRIMAVERA BSS

Dissertação de mestrado integrado em Engenharia e Gestão de Sistemas de Informação

Managing R&D Content with Web-based KM Software

Työssä tutkittiin tehokasta tietojohtamista globaalin metsäteollisuusyrityksen tutkimus ja kehitys verkostossa. Työn tavoitteena oli rakentaa kuvaus tutkimus ja kehitys sisällön hallintaan kohdeyrityksen käyttämän tietojohtamisohjelmiston avulla. Ensin selvitettiin käsitteitä tietämys ja tietojohtaminen kirjallisuuden avulla. Selvityksen perusteella esitettiin prosessimalli, jolla tietämystä voidaan tehokkaasti hallita yrityksessä. Seuraavaksi analysoitiin tietojohtamisen asettamia vaatimuksia informaatioteknologialle ja informaatioteknologian roolia prosessimallissa. Verkoston vaatimukset tietojohtamista kohtaan selvitettiin haastattelemalla yrityksen avainhenkilöitä. Haastatteluiden perusteella järjestelmän tuli tehokkaasti tukea virtuaalisten projektiryhmien työskentelyä, mahdollistaa tehtaiden välinen tietämyksen jakaminen ja tukea järjestelmään syötetyn sisällön hallintaa. Ensiksi järjestelmän käyttöliittymän rakenne ja salaukset muokattiin vastaamaan verkoston tarpeita. Rakenne tarjoaa työalueen työryhmille ja alueet tehtaiden väliseen tietämyksen jakamiseen. Sisällönhallintaa varten järjestelmään kehitettiin kategoria, profiloitu portaali ja valmiiksi määriteltyjä hakuja. Kehitetty malli tehostaa projektiryhmien työskentelyä, mahdollistaa olemassa olevan tietämyksen hyväksikäytön tehdastasolla sekä helpottaa tutkimus ja kehitys aktiviteettien seurantaa. Toimenpide-ehdotuksina esitetään järjestelmän integrointia tehtaiden operatiivisiin ohjausjärjestelmiin ja ohjelmiston käyttöönottoa tehdastason projektinhallinta työkaluksi.Ehdotusten tavoitteena on varmistaa sekä tehokas tietämyksen jakaminen tehtaiden välillä että tehokas tietojohtaminen tehdastasolla.

Towards increased productivity and quality in software development using agile, lean and collaborative approaches

Dagens programvaruindustri står inför alltmer komplicerade utmaningar i en värld där programvara är nästan allstädes närvarande i våra dagliga liv. Konsumenten vill ha produkter som är pålitliga, innovativa och rika i funktionalitet, men samtidigt också förmånliga. Utmaningen för oss inom IT-industrin är att skapa mer komplexa, innovativa lösningar till en lägre kostnad. Detta är en av orsakerna till att processförbättring som forskningsområde inte har minskat i betydelse. IT-proffs ställer sig frågan: “Hur håller vi våra löften till våra kunder, samtidigt som vi minimerar vår risk och ökar vår kvalitet och produktivitet?” Inom processförbättringsområdet finns det olika tillvägagångssätt. Traditionella processförbättringsmetoder för programvara som CMMI och SPICE fokuserar på kvalitets- och riskaspekten hos förbättringsprocessen. Mer lättviktiga metoder som t.ex. lättrörliga metoder (agile methods) och Lean-metoder fokuserar på att hålla löften och förbättra produktiviteten genom att minimera slöseri inom utvecklingsprocessen. Forskningen som presenteras i denna avhandling utfördes med ett specifikt mål framför ögonen: att förbättra kostnadseffektiviteten i arbetsmetoderna utan att kompromissa med kvaliteten. Den utmaningen attackerades från tre olika vinklar. För det första förbättras arbetsmetoderna genom att man introducerar lättrörliga metoder. För det andra bibehålls kvaliteten genom att man använder mätmetoder på produktnivå. För det tredje förbättras kunskapsspridningen inom stora företag genom metoder som sätter samarbete i centrum. Rörelsen bakom lättrörliga arbetsmetoder växte fram under 90-talet som en reaktion på de orealistiska krav som den tidigare förhärskande vattenfallsmetoden ställde på IT-branschen. Programutveckling är en kreativ process och skiljer sig från annan industri i det att den största delen av det dagliga arbetet går ut på att skapa något nytt som inte har funnits tidigare. Varje programutvecklare måste vara expert på sitt område och använder en stor del av sin arbetsdag till att skapa lösningar på problem som hon aldrig tidigare har löst. Trots att detta har varit ett välkänt faktum redan i många decennier, styrs ändå många programvaruprojekt som om de vore produktionslinjer i fabriker. Ett av målen för rörelsen bakom lättrörliga metoder är att lyfta fram just denna diskrepans mellan programutvecklingens innersta natur och sättet på vilket programvaruprojekt styrs. Lättrörliga arbetsmetoder har visat sig fungera väl i de sammanhang de skapades för, dvs. små, samlokaliserade team som jobbar i nära samarbete med en engagerad kund. I andra sammanhang, och speciellt i stora, geografiskt utspridda företag, är det mera utmanande att införa lättrörliga metoder. Vi har nalkats utmaningen genom att införa lättrörliga metoder med hjälp av pilotprojekt. Detta har två klara fördelar. För det första kan man inkrementellt samla kunskap om metoderna och deras samverkan med sammanhanget i fråga. På så sätt kan man lättare utveckla och anpassa metoderna till de specifika krav som sammanhanget ställer. För det andra kan man lättare överbrygga motstånd mot förändring genom att introducera kulturella förändringar varsamt och genom att målgruppen får direkt förstahandskontakt med de nya metoderna. Relevanta mätmetoder för produkter kan hjälpa programvaruutvecklingsteam att förbättra sina arbetsmetoder. När det gäller team som jobbar med lättrörliga och Lean-metoder kan en bra uppsättning mätmetoder vara avgörande för beslutsfattandet när man prioriterar listan över uppgifter som ska göras. Vårt fokus har legat på att stöda lättrörliga och Lean-team med interna produktmätmetoder för beslutsstöd gällande så kallad omfaktorering, dvs. kontinuerlig kvalitetsförbättring av programmets kod och design. Det kan vara svårt att ta ett beslut att omfaktorera, speciellt för lättrörliga och Lean-team, eftersom de förväntas kunna rättfärdiga sina prioriteter i termer av affärsvärde. Vi föreslår ett sätt att mäta designkvaliteten hos system som har utvecklats med hjälp av det så kallade modelldrivna paradigmet. Vi konstruerar även ett sätt att integrera denna mätmetod i lättrörliga och Lean-arbetsmetoder. En viktig del av alla processförbättringsinitiativ är att sprida kunskap om den nya programvaruprocessen. Detta gäller oavsett hurdan process man försöker introducera – vare sig processen är plandriven eller lättrörlig. Vi föreslår att metoder som baserar sig på samarbete när processen skapas och vidareutvecklas är ett bra sätt att stöda kunskapsspridning på. Vi ger en översikt över författarverktyg för processer på marknaden med det förslaget i åtanke.

A Case Study of Agile Software Engineering Methods and Practices in the MeeGo Harmattan Open Source and Product Context

The aim of this master’s thesis is to study how Agile method (Scrum) and open source software are utilized to produce software for a flagship product in a complex production environment. The empirical case and the used artefacts are taken from the Nokia MeeGo N9 product program, and from the related software program, called as the Harmattan. The single research case is analysed by using a qualitative method. The Grounded Theory principles are utilized, first, to find out all the related concepts from artefacts. Second, these concepts are analysed, and finally categorized to a core category and six supported categories. The result is formulated as the operation of software practices conceivable in circumstances, where the accountable software development teams and related context accepts a open source software nature as a part of business vision and the whole organization supports the Agile methods.

Software Development Process Modeling. Developers Perspective to Contemporary Modeling Techniques

Formal software development processes and well-defined development methodologies are nowadays seen as the definite way to produce high-quality software within time-limits and budgets. The variety of such high-level methodologies is huge ranging from rigorous process frameworks like CMMI and RUP to more lightweight agile methodologies. The need for managing this variety and the fact that practically every software development organization has its own unique set of development processes and methods have created a profession of software process engineers. Different kinds of informal and formal software process modeling languages are essential tools for process engineers. These are used to define processes in a way which allows easy management of processes, for example process dissemination, process tailoring and process enactment. The process modeling languages are usually used as a tool for process engineering where the main focus is on the processes themselves. This dissertation has a different emphasis. The dissertation analyses modern software development process modeling from the software developers’ point of view. The goal of the dissertation is to investigate whether the software process modeling and the software process models aid software developers in their day-to-day work and what are the main mechanisms for this. The focus of the work is on the Software Process Engineering Metamodel (SPEM) framework which is currently one of the most influential process modeling notations in software engineering. The research theme is elaborated through six scientific articles which represent the dissertation research done with process modeling during an approximately five year period. The research follows the classical engineering research discipline where the current situation is analyzed, a potentially better solution is developed and finally its implications are analyzed. The research applies a variety of different research techniques ranging from literature surveys to qualitative studies done amongst software practitioners. The key finding of the dissertation is that software process modeling notations and techniques are usually developed in process engineering terms. As a consequence the connection between the process models and actual development work is loose. In addition, the modeling standards like SPEM are partially incomplete when it comes to pragmatic process modeling needs, like light-weight modeling and combining pre-defined process components. This leads to a situation, where the full potential of process modeling techniques for aiding the daily development activities can not be achieved. Despite these difficulties the dissertation shows that it is possible to use modeling standards like SPEM to aid software developers in their work. The dissertation presents a light-weight modeling technique, which software development teams can use to quickly analyze their work practices in a more objective manner. The dissertation also shows how process modeling can be used to more easily compare different software development situations and to analyze their differences in a systematic way. Models also help to share this knowledge with others. A qualitative study done amongst Finnish software practitioners verifies the conclusions of other studies in the dissertation. Although processes and development methodologies are seen as an essential part of software development, the process modeling techniques are rarely used during the daily development work. However, the potential of these techniques intrigues the practitioners. As a conclusion the dissertation shows that process modeling techniques, most commonly used as tools for process engineers, can also be used as tools for organizing the daily software development work. This work presents theoretical solutions for bringing the process modeling closer to the ground-level software development activities. These theories are proven feasible by presenting several case studies where the modeling techniques are used e.g. to find differences in the work methods of the members of a software team and to share the process knowledge to a wider audience.

Application of the scrum framework in non-software project management

Scrum is an agile project management approach that has been widely practiced in the software development projects. It has proven to increase quality, productivity, customer satisfaction, transparency and team morale among other benefits from its implementation. The concept of scrum is based on the concepts of incremental innovation strategies, lean manufacturing, kaizen, iterative development and so on and is usually contrasted with the linear development models such as the waterfall method in the software industry. The traditional approaches to project management such as the waterfall method imply intensive upfront planning and approval of the entire project. These sort of approaches work well in the well-defined stable environments where all the specifications of the project are known in the beginning. However, in the uncertain environments when a project requires continuous development and incorporation of new requirements, they do not tend to work well. The scrum framework was inspiraed by Nonaka’s article about new product developement and was later adopted by software development practitioners. This research explores conditions for and benefits of the application of scrum framework beyond software development projects. There are currently a few case studies on the scrum implementation in non-software projects, but there is a noticeable trend of it in the scrum practitioners’ community. The research is based on the real-life context multiple case study analysis of three different non-software projects. The results of the research showed that in order to succeed within scrum projects need to satisfy certain conditions – necessary and sufficient. Among them the key factors are uncertainty of the project environment, not well defined outcomes, commitment of the scrum teams and management support. The top advantages of scrum implementation identified in the present research include improved transparency, accountability, team morale, communications, cooperation and collaboration. Further researches are advised to be carried out in order to validate these findings on a larger sample and to focus on more specific areas of scrum project management implementation.

Modelling software quality : a multidimensional approach

Les sociétés modernes dépendent de plus en plus sur les systèmes informatiques et ainsi, il y a de plus en plus de pression sur les équipes de développement pour produire des logiciels de bonne qualité. Plusieurs compagnies utilisent des modèles de qualité, des suites de programmes qui analysent et évaluent la qualité d'autres programmes, mais la construction de modèles de qualité est difficile parce qu'il existe plusieurs questions qui n'ont pas été répondues dans la littérature. Nous avons étudié les pratiques de modélisation de la qualité auprès d'une grande entreprise et avons identifié les trois dimensions où une recherche additionnelle est désirable : Le support de la subjectivité de la qualité, les techniques pour faire le suivi de la qualité lors de l'évolution des logiciels, et la composition de la qualité entre différents niveaux d'abstraction. Concernant la subjectivité, nous avons proposé l'utilisation de modèles bayésiens parce qu'ils sont capables de traiter des données ambiguës. Nous avons appliqué nos modèles au problème de la détection des défauts de conception. Dans une étude de deux logiciels libres, nous avons trouvé que notre approche est supérieure aux techniques décrites dans l'état de l'art, qui sont basées sur des règles. Pour supporter l'évolution des logiciels, nous avons considéré que les scores produits par un modèle de qualité sont des signaux qui peuvent être analysés en utilisant des techniques d'exploration de données pour identifier des patrons d'évolution de la qualité. Nous avons étudié comment les défauts de conception apparaissent et disparaissent des logiciels. Un logiciel est typiquement conçu comme une hiérarchie de composants, mais les modèles de qualité ne tiennent pas compte de cette organisation. Dans la dernière partie de la dissertation, nous présentons un modèle de qualité à deux niveaux. Ces modèles ont trois parties: un modèle au niveau du composant, un modèle qui évalue l'importance de chacun des composants, et un autre qui évalue la qualité d'un composé en combinant la qualité de ses composants. L'approche a été testée sur la prédiction de classes à fort changement à partir de la qualité des méthodes. Nous avons trouvé que nos modèles à deux niveaux permettent une meilleure identification des classes à fort changement. Pour terminer, nous avons appliqué nos modèles à deux niveaux pour l'évaluation de la navigabilité des sites web à partir de la qualité des pages. Nos modèles étaient capables de distinguer entre des sites de très bonne qualité et des sites choisis aléatoirement. Au cours de la dissertation, nous présentons non seulement des problèmes théoriques et leurs solutions, mais nous avons également mené des expériences pour démontrer les avantages et les limitations de nos solutions. Nos résultats indiquent qu'on peut espérer améliorer l'état de l'art dans les trois dimensions présentées. En particulier, notre travail sur la composition de la qualité et la modélisation de l'importance est le premier à cibler ce problème. Nous croyons que nos modèles à deux niveaux sont un point de départ intéressant pour des travaux de recherche plus approfondis.

A unified framework for the comprehension of software's time dimension

Les logiciels sont de plus en plus complexes et leur développement est souvent fait par des équipes dispersées et changeantes. Par ailleurs, de nos jours, la majorité des logiciels sont recyclés au lieu d’être développés à partir de zéro. La tâche de compréhension, inhérente aux tâches de maintenance, consiste à analyser plusieurs dimensions du logiciel en parallèle. La dimension temps intervient à deux niveaux dans le logiciel : il change durant son évolution et durant son exécution. Ces changements prennent un sens particulier quand ils sont analysés avec d’autres dimensions du logiciel. L’analyse de données multidimensionnelles est un problème difficile à résoudre. Cependant, certaines méthodes permettent de contourner cette difficulté. Ainsi, les approches semi-automatiques, comme la visualisation du logiciel, permettent à l’usager d’intervenir durant l’analyse pour explorer et guider la recherche d’informations. Dans une première étape de la thèse, nous appliquons des techniques de visualisation pour mieux comprendre la dynamique des logiciels pendant l’évolution et l’exécution. Les changements dans le temps sont représentés par des heat maps. Ainsi, nous utilisons la même représentation graphique pour visualiser les changements pendant l’évolution et ceux pendant l’exécution. Une autre catégorie d’approches, qui permettent de comprendre certains aspects dynamiques du logiciel, concerne l’utilisation d’heuristiques. Dans une seconde étape de la thèse, nous nous intéressons à l’identification des phases pendant l’évolution ou pendant l’exécution en utilisant la même approche. Dans ce contexte, la prémisse est qu’il existe une cohérence inhérente dans les évènements, qui permet d’isoler des sous-ensembles comme des phases. Cette hypothèse de cohérence est ensuite définie spécifiquement pour les évènements de changements de code (évolution) ou de changements d’état (exécution). L’objectif de la thèse est d’étudier l’unification de ces deux dimensions du temps que sont l’évolution et l’exécution. Ceci s’inscrit dans notre volonté de rapprocher les deux domaines de recherche qui s’intéressent à une même catégorie de problèmes, mais selon deux perspectives différentes.