Alguns estudos de fluxo de fluido utilizando software gráfico

Analisamos alguns modelos de fluxo de fluido utilizando o software gráfico F(C): Funções Complexas. Descrevemos as equações que expressam o potencial complexo, bem como a velocidade complexa para cada modelo. Os modelos estudados são fluxo uniforme, com fonte, com sumidouro, composto, circular e com obstáculo. Apresentamos o conceito de Domínio de Cores e o mecanismo de leitura dos gráficos. Cada modelo é apresentado de forma exemplificada, incluindo representações geométricas das curvas de fluxo e equipotenciais, bem como os gráficos do potencial complexo e velocidade complexa.

Desenvolvimento de software para exibição de exames de eletrocardiograma

The main objective is to create a software, using C++ language, for reading and exhibiting in a graphic an Electrocardiogram (ECG) wave. The data is recorded as a FM modulated signal and compressed using Adaptive Differential Pulse Code Modulation (ADPCM). The signal have this characteristics because it was acquired using an experimental equipment, this equipment is the result of research made by the professor who supervised this work. FM demodulation techniques in discrete time, discrete filters and digital signal processing are some of the topics that can be found in this essay. Some concepts about the human heart and about ECG waves are also briefly introduced. These concepts are necessary for understanding the final evaluation of the software performance. The development is partly made using MATLAB. Most of the functions that are used on the software are first tested and designed in MATLAB environment. In the end, an evaluation is done comparing the results that are expected with the ones that MATLAB presents and the ones that the developed software presents

Arrow plot and CA maps on microarray preprocessing methods

Microarray allow to monitoring simultaneously thousands of genes, where the abundance of the transcripts under a same experimental condition at the same time can be quantified. Among various available array technologies, double channel cDNA microarray experiments have arisen in numerous technical protocols associated to genomic studies, which is the focus of this work. Microarray experiments involve many steps and each one can affect the quality of raw data. Background correction and normalization are preprocessing techniques to clean and correct the raw data when undesirable fluctuations arise from technical factors. Several recent studies showed that there is no preprocessing strategy that outperforms others in all circumstances and thus it seems difficult to provide general recommendations. In this work, it is proposed to use exploratory techniques to visualize the effects of preprocessing methods on statistical analysis of cancer two-channel microarray data sets, where the cancer types (classes) are known. For selecting differential expressed genes the arrow plot was used and the graph of profiles resultant from the correspondence analysis for visualizing the results. It was used 6 background methods and 6 normalization methods, performing 36 pre-processing methods and it was analyzed in a published cDNA microarray database (Liver) available at http://genome-www5.stanford.edu/ which microarrays were already classified by cancer type. All statistical analyses were performed using the R statistical software.

Automatic delimitation of the clinical region of interest in ultra-wide field of view images of the retina

Retinal ultra-wide field of view images (fundus images) provides the visu-alization of a large part of the retina though, artifacts may appear in those images. Eyelashes and eyelids often cover the clinical region of interest and worse, eye-lashes can be mistaken with arteries and/or veins when those images are put through automatic diagnosis or segmentation software creating, in those cases, the appearance of false positives results. Correcting this problem, the first step in the development of qualified auto-matic diseases diagnosis programs can be done and in that way the development of an objective tool to assess diseases eradicating the human error from those processes can also be achieved. In this work the development of a tool that automatically delimitates the clinical region of interest is proposed by retrieving features from the images that will be analyzed by an automatic classifier. This automatic classifier will evaluate the information and will decide which part of the image is of interest and which part contains artifacts. The results were validated by implementing a software in C# language and validated through a statistical analysis. From those results it was confirmed that the methodology presented is capable of detecting artifacts and selecting the clin-ical region of interest in fundus images of the retina.

Agentes deletéreos para Trypanosoma cruzi: Patogenia de la infección de placenta humana en la enfermedad congénita de Chagas, in vitro. Deleterious agents to Trypanosoma cruzi: Pathogenia of the human placenta infection in the congenital Chagas disease.

Trypanosoma cruzi, agente causal del Chagas, atraviesa la barrera placentaria y produce la enfermedad congénita. Objetivo general: Analizar si el T. cruzi, agente causal del Chagas, produce alteraciones trofoblásticas de las vellosidades coriónicas mediadas por óxido nítrico (principal agente deletéreo contra T. cruzi) y estrés oxidativo con variaciones que pudieran depender de la disponibiidad de L-arginine, sobre placentas en modelos in vitro de co-cultivos de explantos de vellosidades coriónicas, de sinciciotrofoblasto aislado y de células derivadas del trofoblasto de placentas humanas en interacción con distintas cepas del Trypanosoma cruzi, que pudieran dar alguna luz en la explicación de mecanismos involucrados en la infección placentaria y en algunos síndromes clínicos de la transmisión congénita del Chagas. Objetivos Específicos: a) Describir alteraciones estructurales y presencia de T. cruzi en vellosidades coriónicas de placentas humanas procedentes de co-cultivos con Trypanosoma cruzi in vitro (y sus respectivos controles), mediante técnicas histológicas y PCR analizando secuencias de ADN específicas del parásito.b) Establecer la localización y expresión proteica y la expresión transcripcional de las isoformas II y III de la Öxido Nítrico Sintasa sobre la misma población muestral de (a) mediante técnicas inmunohistoquímica, RT-PCR y semicuantificación con software adecuado. c) Analizar la susceptibilidad a la infección por el T. cruzi del citotrofoblasto (CTB) y sinciciotrofoblasto (STB) placentario aislado in vitro. d) Determinar concentraciones de óxido nítrico y estrés oxidativo del sinciciotrofoblasto (STB) aislado ante la infección por T. cruzi. e) Relacionar concentraciones de L-arginina con infección del trofoblasto aislado. f) Relacionar inhibiciones de la eNOS y de la arginasa con infección trofoblástica y óxido nítrico producido.Se emplearán métodos y técnicas de Biología celular y molecular, mediciones hormonales, enzimáticas, proteicas, parasitarias y bioquímicas en medios sobrenadantes de cultivo, de inmuno-detección de epitopes proteicos en tejidos, expresión de ARN por RT-PCR, Western blot, detección de DNA en tejidos por PCR, Cuantificaciones morfométricas. En general, el presente proyecto podría redundar en beneficios para un sector de la población de las áreas endémicas para esta enfermedad de bajos recursos económicos, sociales y culturales, mediante la obtención de datos que pudieran explicar algunos mecanismos de síndromes clínicos descriptos en esta patología y que pudieran participar en la transmisión congénita de la enfermedad de Chagas.

Capa de persistencia en .NET

En aquest projecte s'ha implementat una capa de persistència basada en metadades sota la plataforma .NET, utilitzant el llenguatge de programació C#.

WM Program manual

This manual describes how to run the new produced GUI C++ program that so called'WM' program. Section two describes the instructions of the program installation.Section three illustrates test runs description including running the program WM,sample of the input, output files, in addition to some generated graphs followed by the main form of the program created by using the Borland C++ Builder 6.

Estudio sobre el g??nero y la inteligencia en escolares de seis a doce a??os, en funci??n del WISC

Investigar si existe alguna diferencia significativa en el desarrollo de la inteligencia entre chicos y chicas de 6 a 12 a??os. En caso positivo, cuales son las ??reas m??s significativas y si existe alguna connotaci??n org??nica de tipo madurativo o solo psicol??gica.. 108 chicos y 182 chicas repartidos en cuatro grupos de edad: 6-7 a??os, 8-9 a??os, 10-11 a??os y 12 a??os. Asisten al mismo colegio privado de Barcelona, son de raza leucoderma (cauc??sicos), de nivel socioecon??mico medio y de padres no separados.. Realiza una revisi??n sobre las investigaciones realizadas entorno al tema del desarrollo de la inteligencia seg??n el sexo. Lleva a cabo un estudio emp??rico para comprobar si existen diferencias de sexo mediante la valoraci??n de los resultados obtenidos en la administraci??n del WISC a una muestra de ni??os. Divide la muestra en ocho subgrupos en funci??n de las variables sexo y edad. Analiza las puntuaciones directas obtenidas por cada grupo en cada subtest. Obtiene las puntuaciones tipificadas y calcula el CI global, el verbal y el manipulativo para cada subgrupo y los compara entre s??.. Adaptaci??n espa??ola del WISC: Escala de Inteligencia de Wechsler para ni??os.. An??lisis de varianza multivariado para investigar las diferencias entre sexo. Indices Lambda de Wilks, Indice de Pillais, Indice de Hotelling-Lauley y Indice Rey de significaci??n estad??stica para los resultados en cada subtest. Indices de correlaci??n y Histogramas. Software SPSS.. C.I. general: los varones de 6-7 a??os obtienen puntuaciones m??s elevadas b??sicamente en Manipulaci??n. C. Verbal: los varones obtienen puntuaciones m??s elevadas en los 8-9 a??os. C.I. Manipulativo: en los grupos 6-7 y 8-9 las mujeres obtienen puntuaciones m??s bajas, sin embargo a los 10-11 y 12 a??os ya no existe diferencia. Los varones obtienen puntuaciones m??s elevadas en las habilidades espaciales y relaciones figurativas.. En este estudio y para esta muestra existe una diferencia de g??nero en el desarrollo de la inteligencia. Las ??reas m??s significativamente diferentes son la percepci??n visual, relaciones espaciales, coordinaci??n visomotora, razonamiento y manejo autom??tico de s??mbolos, as?? como la concentraci??n. La mujer emplea m??s a menudo ambos hemisferios (m??s difuso) y el hemisferio izquierdo, en tanto que el var??n solo un hemisferio (m??s concreto)..

Método primal-dual de pontos interiores aplicado ao problema de despacho econômico e ambiental

Este artigo traz os resultados obtidos através do estudo e da aplicação do Método Primal-Dual Previsor-Corretor de Pontos Interiores para Problema de Programação Quadr´atica convexa a um Problema de Despacho Econômico (PDE) e a um Problema Multiobjetivo de Despacho Econômico e Ambiental (DEA). O primeiro problema busca determinar a solução ótima aproximada, minimizando os custos dos combustíveis empregados na geração termoelétrica de energia e satisfazendo as restrições operacionais. Já o segundo é solucionado através do Método da Soma Ponderada, que apresenta um balanceamento entre o problema de otimização dos custos e o problema de emissão de poluentes. Ao final do artigo, um algoritmo para cada problema é proposto e implementado computacionalmente utilizando o software Borland C++ Builder 6.0. Os testes foram realizados utilizando um PDE de 13 geradores e um DEA de 06 geradores e os resultados obtidos demonstram a eficiˆencia dos m´etodos quando comparados a outros encontrados na literatura.

Aplicação de um método híbrido de pontos interiores e branch-and-bound em problemas de minimização de custo de colheita da cana-de-açúcar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sistema de telemetría para un vehículo de fórmula S.A.E.

En este proyecto, se ha desarrollado una aplicación electrónica para un coche de competición, en concreto para la fórmula SAE (Society of Automotive Engineers), una competición universitaria en la que cada equipo, formado por estudiantes, debe diseñar, construir y probar un prototipo basándose en una serie de reglas. El objetivo final de la competición es proporcionar a los estudiantes el conocimiento práctico necesario para su futura labor profesional, del cual se pensaba que los estudiantes adolecían al acabar sus estudios universitarios cuando se creó esta competición. La aplicación desarrollada en este proyecto consiste en un sistema de telemetría, utilizado para transmitir los datos proporcionados por los sensores del vehículo a través de un sistema de radiofrecuencia, de manera que se pueda estudiar el comportamiento del coche durante los ensayos a la vez que el coche está rodando y así no depender de un sistema de adquisición de datos del que había que descargarse la información una vez finalizada la sesión de ensayo, como había que hacer hasta el momento. Para la implementación del proyecto, se ha utilizado un kit de desarrollo (Xbee Pro 868) que incluye dos módulos de radio, dos placas de desarrollo, dos cables USB y una antena, el cual ha permitido desarrollar la parte de radio del proyecto. Para transmitir los datos proporcionados por la centralita del vehículo, la cual recoge la información de todos los sensores presentes en el vehículo, se han desarrollado dos placas de circuito impreso. La primera de ellas tiene como elemento principal un microprocesador PIC de la marca Microchip (PIC24HJ64GP502), que recoge los datos proporcionados por la centralita del vehículo a través de su bus CAN de comunicaciones. La segunda placa de circuito impreso tiene como elemento fundamental el transmisor de radio. Dicho transmisor está conectado al microprocesador de la otra placa a través de línea serie. Como receptor de radio se ha utilizado una de las placas de prueba que integraba el kit de desarrollo Xbee Pro 868, la cual recoge los datos que han sido enviados vía radio y los manda a su vez a través de USB a un ordenador donde son monitorizados. Hasta aquí la parte hardware del sistema. En cuanto a la parte software, ha habido que desarrollar una aplicación en lenguaje C, que ejecuta el microprocesador PIC, que se encarga de recoger los datos enviados por la centralita a través del bus CAN (Controller Area Network) y transmitirlos a través de línea serie al chip de radio. Por último, para la monitorización de los datos se han desarrollado dos aplicaciones en LabVIEW, una que recoge los datos a través de USB, los muestra en pantalla y los guarda en un fichero y otra que lee los datos del fichero y los representa gráficamente para permitir un estudio más detallado del comportamiento del vehículo. ABSTRACT In this project, an electronic application has been developed for a race car – Formula SAE car-. Formula SAE is a university championship in which each team, made up of students, should design, construct and test a prototype within certain rules. The final goal of the competition is to enhance the practical knowledge of the students, which was thougth to be poor at the time the competition was created. The application developed in this project consists of a telemetry system, employed to transmit the data provided by the car’s sensors through a radio frequency system, so that it could be possible to study the behaviour of the vehicle during tests and do not depend on a datalogger system as it occurred until now. To carry out the radio module of the project, a Xbee Pro 868 development kit has been used, which includes two radio modules, two development boards, two USB cables and an antenna. To transmit the data provided by the ECU (Engine Control Unit) of the vehicle, which receives information from all the sensors the vehicle has, two printed circuit boards have been built. One of them has a PIC microprocessor of Microchip (PIC24HJ64GP502) which receives the data coming from CAN bus of the ECU. Tha main element of the other printed circuit board is the radio transmitter. This chip receives the data from the microprocessor through its serial line. The development board of the Xbee Pro 868 has been used as receiver. When data arrives to the receiver, it transmits them to a computer through USB where the data are displayed. All this composes the hardware of the system. Regarding the software, a C coded application has been developed. This application is executed by the microprocessor and its function is to receive the data from the bus CAN (Controller Area Network) and send them to the radio transmitter through the microprocessor’s serial line. To show the data on the computer, two LabVIEW applications has been developed. The first one receives the data through the USB port, displays them on the screen and save them to a file and the second one reads the data from the file while represents them graphically to allow studying the behaviour of the car on track.

How do practitioners use conceptual modeling in practice?

Much research has been devoted over the years to investigating and advancing the techniques and tools used by analysts when they model. As opposed to what academics, software providers and their resellers promote as should be happening, the aim of this research was to determine whether practitioners still embraced conceptual modeling seriously. In addition, what are the most popular techniques and tools used for conceptual modeling? What are the major purposes for which conceptual modeling is used? The study found that the top six most frequently used modeling techniques and methods were ER diagramming, data flow diagramming, systems flowcharting, workflow modeling, UML, and structured charts. Modeling technique use was found to decrease significantly from smaller to medium-sized organizations, but then to increase significantly in larger organizations (proxying for large, complex projects). Technique use was also found to significantly follow an inverted U-shaped curve, contrary to some prior explanations. Additionally, an important contribution of this study was the identification of the factors that uniquely influence the decision of analysts to continue to use modeling, viz., communication (using diagrams) to/from stakeholders, internal knowledge (lack of) of techniques, user expectations management, understanding models' integration into the business, and tool/software deficiencies. The highest ranked purposes for which modeling was undertaken were database design and management, business process documentation, business process improvement, and software development. (c) 2005 Elsevier B.V. All rights reserved.

Multipurpose portable system for environmental, industrial, and medical applications

This dissertation is about the research carried on developing an MPS (Multipurpose Portable System) which consists of an instrument and many accessories. The instrument is portable, hand-held, and rechargeable battery operated, and it measures temperature, absorbance, and concentration of samples by using optical principles. The system also performs auxiliary functions like incubation and mixing. This system can be used in environmental, industrial, and medical applications. ^ Research emphasis is on system modularity, easy configuration, accuracy of measurements, power management schemes, reliability, low cost, computer interface, and networking. The instrument can send the data to a computer for data analysis and presentation, or to a printer. ^ This dissertation includes the presentation of a full working system. This involved integration of hardware and firmware for the micro-controller in assembly language, software in C and other application modules. ^ The instrument contains the Optics, Transimpedance Amplifiers, Voltage-to-Frequency Converters, LCD display, Lamp Driver, Battery Charger, Battery Manager, Timer, Interface Port, and Micro-controller. ^ The accessories are a Printer, Data Acquisition Adapter (to transfer the measurements to a computer via the Printer Port and expand the Analog/Digital conversion capability), Car Plug Adapter, and AC Transformer. This system has been fully evaluated for fault tolerance and the schemes will also be presented. ^

Dosimetria interna da inalazione in Medicina Nucleare

Scopo di questo lavoro è l’individuazione di una metodica che permetta la valutazione dosimetrica interna dei lavoratori in Medicina Nucleare, dell’I.R.S.T. I radionuclidi impiegati hanno elevata volatilità e tempi di dimezzamento molto brevi quindi, diventa di fondamentale importanza la misura della concentrazione in aria. come radioisotopo d'interesse è stato considerato il F-18. Per la misura della contaminazione in aria è stato utilizzato un sistema progettato dall’azienda MecMurphil (MP-AIR). L’aria attraversa un beaker Marinelli, posto in un pozzetto schermato in piombo (5/6 cm di spessore più rivestimento in rame di 3 mm) nel quale è inserito un rivelatore a scintillazione NaI(Tl) a basso fondo in modalità di campionamento continuo. Attraverso il software MAIR-C, collegato al rivelatore, è stato possibile calibrarlo in energia, FWHM e efficienza. I locali analizzati, poiché quotidianamente frequentati dal personale, sono: Laboratorio caldo, Corridoio, Attesa calda, Camere degenza, e Radiofarmacia. Mediante l’uso di fogli di calcolo, è stata determinata la concentrazione media presente nei diversi locali. I risultati ottenuti hanno mostrato che la concentrazione massima di F-18 è nella radiofarmacia.Le persone con accesso ai locali “caldi” sono state classificate, sulla base delle attività da loro svolte in: medici, TSRM, infermieri e radiofarmacisti. Per ognuna di queste figure è stato stimato il tempo di permanenza all’interno dei locali.Si è proceduto, poi, alla validazione del metodo utilizzato per il calcolo della dose interna per inalazione, applicando quanto riportato nella pubblicazione I.C.R.P. 66, che ha come scopo principale quello di determinare i limiti annuali d’introduzione dei radionuclidi per i lavoratori.Le metodiche, applicate al solo radioisotopo F-18, permettono di ricavare una prima stima della dose inalata dagli operatori, aprendo un’ ampia gamma di possibili sviluppi futuri.