Sleeping site selection by the golden-handed tamarin Saguinus midas midas: The role of predation risk, proximity to feeding sites, and territorial defence

Tamarin monkeys, of the genus Saguinus, spend over half their lives at arboreal sleeping sites. The decision as to which site to use is likely to have considerable fitness consequences. These decisions about sleeping sites by three troops of golden-handed tamarin Saguinus midas midas were examined over a 9-mo period at a rainforest site in French Guiana. Data are presented on the physical nature of sleeping sites, their number, position within home ranges, and pattern of use and reuse, aspects of behaviour at retirement and egress, and predation attempts on the study troops. Cumulative plot analysis indicated that a tamarin troop used 30-40 sleeping sites in a 100-day period, approximately half of which were used very infrequently, so that consecutive reuse was never greater than three nights. Sleeping trees were superior in architectural parameters and liana weight to non-sleeping trees. There were no more sleeping sites than expected within the home range boundary region of the tamarins or in areas of overlap with the home ranges of neighbouring troops. Tamarins selected sleeping sites nearest to the last feeding site of the day on 25% of occasions. The study troops engaged in a number of activities that may reduce predation risk; raptor attacks on the study troops over 9 mo were frequent but unsuccessful. Tamarins often visited a sleeping site several hours before arrival, and were more likely to visit a site before use if they had not used it recently. The decision to select a sleeping site therefore involved knowledge of the previous frequency of use of that site.

Sleeping sites, sleeping trees, and sleep-related behaviors of black crested gibbons (Nomascus concolor jingdongensis) at Mt. Wuliang, central Yunnan, China

Data on sleep-related behaviors were collected for a group of central Yunnan black crested gibbons (Nomascus concolor jingdongensis) at Mt. Wuliang, Yunnan, China from March 2005 to April 2006. Members of the group usually formed four sleeping units (adult male and juvenile, adult female with one semi-dependent black infant, adult female with one dependent yellow infant, and subadult male) spread over different sleeping trees. Individuals or units preferred specific areas to sleep; all sleeping sites were situated in primary forest, mostly (77%) between 2,200 and 2,400 m in elevation. They tended to sleep in the tallest and thickest trees with large crowns on steep slopes and near important food patches. Factors influencing sleeping site selection were (1) tree characteristics, (2) accessibility, and (3) easy escape. Few sleeping trees were used repeatedly by the same or other members of the group. The gibbons entered the sleeping trees on average 128 min before sunset and left the sleeping trees on average 33 min after sunrise. The lag between the first and last individual entering the trees was on average 17.8 min. We suggest that sleep-related behaviors are primarily adaptations to minimize the risk of being detected by predators. Sleeping trees may be chosen to make approach and attack difficult for the predator, and to provide an easy escape route in the dark. In response to cold temperatures in a higher habitat, gibbons usually sit and huddle together during the night, and in the cold season they tend to sleep on ferns and/or orchids.

Sleeping sites of Rhinopithecus bieti at Mt. Fuhe, Yunnan

Data on sleeping site selection were collected for a group of black-and-white snub-nosed monkeys (Rhinopithecus bieti; around 80) at Mt. Fuhe, Yunnan, China (99degrees20'E, 26degrees25'N, about 3,000 m asl) from November 2000 to January 2002. At the site mainly three vegetation types were present in an elevation-ascending order: deciduous broad leaf forest, mixed coniferous and broad leaf forest, and dark coniferous forest. In addition, bamboo forest presented in areas burned in 1958. Sleeping sites (n = 10) were located in the coniferous forest, where trees were the tallest, bottommost branches were the highest, the diameter of crowns was the second largest, and the gradient of the ground was the steepest. Monkeys usually kept quiet during entering and staying at a sleeping site. The site choice and the quietness may be tactics to avoid potential predators. In the coniferous forest, however, monkeys did not sleep in the valley bottom where trees were the largest, but frequently slept in the middle of the slope towards the east/southeast, in the shadow of ridges in three other directions, to avoid strong wind and to access sunshine; in winter-spring, they ranged in a more southern and lower area than in summer-autumn. These may be behavioral strategies to minimize energy stress in the cold habitat. Monkeys often slept in the same sleeping site on consecutive nights, which reflected a reduced pressure of predation probably due to either the effectiveness of anti-predation through sleeping site selection, or the population decline of predators with increasing human activities in the habitat. The group's behavioral responses to interactive and sometimes conflicting traits of the habitat are site-specific and conform to expectations for a temperate zone primate.

Ecologia e comportamento de Callitrichidae (Primates) no Jardim Botânico do Rio de Janeiro

Espécies exóticas são consideradas a segunda maior ameaça ao meio ambiente, sendo um risco às espécies nativas devido à predação, competição, hibridação e transmissão de patógenos. Callithrix jacchus e Callithrix penicillata são espécies exóticas amplamente difundidas no Estado do Rio de Janeiro. No presente estudo, dados comportamentais e ecológicos foram amostrados entre Setembro de 2008 e Agosto de 2009 usando-se o método animal focal com amostragem instantânea, acompanhando sete grupos mistos de Callithrix spp. no arboreto do Jardim Botânico do Rio de Janeiro (JBRJ). A densidade dos saguis foi estimada em cerca de 130 indivíduos por Km2. Na dieta, foram identificadas 51 espécies arbóreas fontes de exsudatos e 39 espécies fontes de frutos, folhas, flores e néctar. Os saguis se alimentaram também de invertebrados, pequenos vertebrados, e alimentos direta ou indiretamente fornecidos por visitantes do JBRJ. O consumo de exsudatos foi maior na estação mais seca, e de frutos e insetos na estação mais chuvosa. Os saguis utilizaram mais os estratos verticais intermediários e sub-bosque nas suas atividades diárias, e áreas protegidas por epífitas no dossel de 30 espécies diferentes de árvores como locais de dormida. Os saguis apresentaram relações interespecíficas harmônicas, neutras e desarmônicas com diversas espécies de aves e mamíferos. A dispersão de sementes de árvores exóticas e o uso exagerado de espécimes vegetais para gomivoria pelos saguis podem afetar a integridade da coleção do JBRJ. A alta densidade de saguis e predação de espécies da fauna local podem afetar o equilíbrio da comunidade faunística. Com base nas observações in situ, as espécies alóctones C. jacchus e C. penicillata causam danos e necessitam de manejo, que deve ser estudado e implementado para o controle criterioso de suas populações.

Ranging patterns of François' langur in a fragmented habitat in fusui reserve, Guangxi province, China

Studies of animal ranging patterns and the influencing ecological factors are useful for understanding the relationship between aspects of animal behavior and ecology. In a year-long study, we investigated the ranging behavior and other determining factors for a group of Francois' langur in an isolated habitat of approximately 25.7 ha in Fusui Reserve, China. The Francois' langur home range was estimated to be 15.3 ha, covering ∼60% of their total habitat. The mean yearly day range length estimate was 802.5 m (SD =295.5 m). Langurs changed sleeping sites approximately every 3 days, resulting in increases in the amount of grid cells used and the range length. Food availability of flowers and fruits were seasonal, whereas both mature and immature leaves of most trees were perennial. Ranging behavior was not significantly correlated with the availability of mature leaves, immature leaves, buds, fruits (ripe and unripe fruits) or seeds (p =0.05). These results suggested that variations in food type availability were not factors influencing ranging behavior for this langur group, whereas sleeping site changes, and probably predation avoidance, are factors that influence the ranging patterns of the langur group.

Sleeping sites of black-and-white snub-nosed monkeys (Rhinopithecus bieti) at Baima Snow Mountain, China

Data on sleeping sites of a group of black-and-white snub-nosed monkeys Rhinopithecus bieti (Colobinae, Primates) were collected between April-July and September-December 2001 to try to determine the factors affecting site selection at Nanren (99 degrees

Gene transfer into genomes of human cells by the sleeping beauty transposon system

The Sleeping Beauty (SB) transposon system, derived from teleost fish sequences, is extremely effective at delivering DNA to vertebrate genomes, including those of humans. We have examined several parameters of the SB system to improve it as a potential, nonviral vector for gene therapy. Our investigation centered on three features: the carrying capacity of the transposon for efficient integration into chromosomes of HeLa cells, the effects of overexpression of the SB transposase gene on transposition rates, and improvements in the activity of SB transposase to increase insertion rates of transgenes into cellular chromosomes. We found that SB transposons of about 6 kb retained 50% of the maximal efficiency of transposition, which is sufficient to deliver 70-80% of identified human cDNAs with appropriate transcriptional regulatory sequences. Overexpression inhibition studies revealed that there are optimal ratios of SB transposase to transposon for maximal rates of transposition, suggesting that conditions of delivery of the two-part transposon system are important for the best gene-transfer efficiencies. We further refined the SB transposase to incorporate several amino acid substitutions, the result of which led to an improved transposase called SB11. With SB11 we are able to achieve transposition rates that are about 100-fold above those achieved with plasmids that insert into chromosomes by random recombination. With the recently described improvements to the transposon itself, the SB system appears to be a potential gene-transfer tool for human gene therapy.

Final report : offsite manufacture in Australia Final report off-site manufacture in Australia

Off-site Manufacture (OSM) has long been recognised, both in Australia and internationally, as offering numerous benefits to all parties in the construction process. More importantly, it is recognised as a key vehicle for driving improvement within the construction industry. The uptake of OSM in construction is however limited, despite well documented benefits. The research aims to determine the ‘state-of-the-art’ of OSM in Australia. It confirms the benefits and identifies the real and perceived barriers to the widespread adoption of OSM. Further the project identifies opportunities for future investment and research. Although numerous reports have been produced in the UK on the state of OSM adoption within that region, no prominent studies exist for the Australian context. This scoping study is an essential component upon which to build any initiatives that can take advantage of the benefits of OSM in construction. The Construction 2020 report predicted that OSM is set to increase in use over the next 5-15 years, further justifying the need for such a study. The long-term goal of this study is to contribute to the improvement of the Australian construction industry through a realisation of the potential benefits of OSM.

Off-site Manufacture in Australia : Current State and Future Directions

Off-site manufacture (OSM) offers numerous benefits to all parties in the construction process. The uptake of OSM in Australia has, however, been limited. This limited uptake corresponds to similar trends in the UK and US, although the level of OSM there appears to be increasing. This project undertook three workshops — one each in Victoria, Queensland and Western Australia — and 18 interviews with key stakeholders to assist in identifying the general benefits and barriers to OSM uptake in the Australian construction industry. Seven case studies were also undertaken, involving construction projects that used OSM, ranging from civil projects through to residential. Each of these case studies has been analysed to identify what worked and what didn’t, and suggest the lessons to be learned from each project.

Drivers constraints and the future of off-site manufacture in Australia.

Much has been written on Off-site Manufacture (OSM) in construction, particularly regarding the perceived benefits and barriers to implementation. However, very little understanding of the state of OSM in the Australian construction industry exists. A ‘scoping study' has recently been undertaken to determine the ‘state-of-the-art’ of OSM in Australia. This involved several industry workshops, interviews and case studies across four major states of Australia. The study surveyed a range of suppliers across the construction supply-chain, incorporating the civil, commercial and housing segments of the market. This revealed that skills shortages and lack of adequate OSM knowledge are generally the greatest issues facing OSM in Australia. The drivers and constraints that emerged from the research were, in large measure, consistent with those found in the US and UK, although some Australian anomalies are evident, such as the geographical disparity of markets. A comparative analysis with similar studies in the UK and US is reported, illustrating both the drivers and constraints confronting the industry in Australia. OSM uptake into the future is however dependent on many factors, not least of which is a better understanding of the construction process and its associated costs.

Site survey and analysis of highway trucks overloading status quo in Anhui

In 2004, with the increasing overloading restriction requirements of society in Anhui, a provincial comprehensive overloading transportation survey has been developed to take evaluations on overloading actuality and enforcement efficiency with the support of the World Bank. A total of six site surveys were conducted at Hefei, Fuyang, Luan, Wuhu, Huainan and Huangshan Areas with four main contents respectively: traffic volume, axle load, freight information and registration information. Via statistical analysis on the survey data, conclusions were gained that: vehicle overloading are very universal and serious problems at arterial highways in Anhui now. The traffic loads have far exceeded the designed endure capacity of highways and have caused prevalent premature pavement damage, especially for rigid pavement. The overloading trucks are unimpeded engaged in highway freight transportation actually due to the disordered overloading enforcement strategies and the deficient inspecting technologies.