A site selection process for environmental offsetting purposes in Queensland

A method of selecting land in any region of Queensland for offsetting purposes is devised, employing uniform standards. The procedure first requires that any core natural asset lands, Crown environmental lands, prime urban and agricultural lands, and highly contentious sites in the region be eliminated from consideration. Other land is then sought that is located between existing large reservations and the centre of greatest potential regional development/disturbance. Using the criteria of rehabilitation (rather than preservation) plus proximity to those officially defined Regional Ecosystems that are most threatened, adjacent sites that are described as ‘Cleared’ are identified in terms of agricultural land capability. Class IV lands – defined as those ‘which may be safely used for occasional cultivation with careful management’,2 ‘where it is favourably located for special usage’,3 and where it is ‘helpful to those who are interested in industry or regional planning or in reconstruction’4 – are examined for their appropriate area, for current tenure and for any conditions such as Mining Leases that may exist. The positive impacts from offsets on adjoining lands can then be designed to be significant; examples are also offered in respect of riparian areas and of Marine Parks. Criteria against which to measure performance for trading purposes include functional lift, with other case studies about this matter reported separately in this issue. The procedure takes no account of demand side economics (financial additionality), which requires commercial rather than environmental analysis.

Artificial Neural Network Based Automatic Emergency Landing Site Selection for UAVs and Highly Automated Aircraft

In this report an artificial neural network (ANN) based automated emergency landing site selection system for unmanned aerial vehicle (UAV) and general aviation (GA) is described. The system aims increase safety of UAV operation by emulating pilot decision making in emergency landing scenarios using an ANN to select a safe landing site from available candidates. The strength of an ANN to model complex input relationships makes it a perfect system to handle the multicriteria decision making (MCDM) process of emergency landing site selection. The ANN operates by identifying the more favorable of two landing sites when provided with an input vector derived from both landing site's parameters, the aircraft's current state and wind measurements. The system consists of a feed forward ANN, a pre-processor class which produces ANN input vectors and a class in charge of creating a ranking of landing site candidates using the ANN. The system was successfully implemented in C++ using the FANN C++ library and ROS. Results obtained from ANN training and simulations using randomly generated landing sites by a site detection simulator data verify the feasibility of an ANN based automated emergency landing site selection system.

Nest site selection by Black-necked Crane Grus nigricollis in the Ruoergai Wetland, China

From 5 May 2003 to early June 2005, nest site selection of Black-necked Cranes Grits nigricollis was studied at the Ruoergai Wetland Nature Reserve (RWNR), an important breeding area for the species in China. Results showed that the crane nests only in we

Sleeping site selection by the golden-handed tamarin Saguinus midas midas: The role of predation risk, proximity to feeding sites, and territorial defence

Tamarin monkeys, of the genus Saguinus, spend over half their lives at arboreal sleeping sites. The decision as to which site to use is likely to have considerable fitness consequences. These decisions about sleeping sites by three troops of golden-handed tamarin Saguinus midas midas were examined over a 9-mo period at a rainforest site in French Guiana. Data are presented on the physical nature of sleeping sites, their number, position within home ranges, and pattern of use and reuse, aspects of behaviour at retirement and egress, and predation attempts on the study troops. Cumulative plot analysis indicated that a tamarin troop used 30-40 sleeping sites in a 100-day period, approximately half of which were used very infrequently, so that consecutive reuse was never greater than three nights. Sleeping trees were superior in architectural parameters and liana weight to non-sleeping trees. There were no more sleeping sites than expected within the home range boundary region of the tamarins or in areas of overlap with the home ranges of neighbouring troops. Tamarins selected sleeping sites nearest to the last feeding site of the day on 25% of occasions. The study troops engaged in a number of activities that may reduce predation risk; raptor attacks on the study troops over 9 mo were frequent but unsuccessful. Tamarins often visited a sleeping site several hours before arrival, and were more likely to visit a site before use if they had not used it recently. The decision to select a sleeping site therefore involved knowledge of the previous frequency of use of that site.

Ecological coherence in marine reserve network design: an empirical evaluation of sequential site selection using genetic structure

Ecological coherence is a multifaceted conservation objective that includes some potentially conflicting concepts. These concepts include the extent to which the network maximises diversity (including genetic diversity) and the extent to which protected areas interact with non-reserve locations. To examine the consequences of different selection criteria, the preferred location to complement protected sites was examined using samples taken from four locations around each of two marine protected areas: Strangford Lough and Lough Hyne, Ireland. Three different measures of genetic distance were used: FST, Dest and a measure of allelic dissimilarity, along with a direct assessment of the total number of alleles in different candidate networks. Standardized site scores were used for comparisons across methods and selection criteria. The average score for Castlehaven, a site relatively close to Lough Hyne, was highest, implying that this site would capture the most genetic diversity while ensuring highest degree of interaction between protected and unprotected sites. Patterns around Strangford Lough were more ambiguous, potentially reflecting the weaker genetic structure around this protected area in comparison to Lough Hyne. Similar patterns were found across species with different dispersal capacities, indicating that methods based on genetic distance could be used to help maximise ecological coherence in reserve networks. ⺠Ecological coherence is a key component of marine protected area network design. ⺠Coherence contains a number of competing concepts. ⺠Genetic information from field populations can help guide assessments of coherence. ⺠Average choice across different concepts of coherence was consistent among species. ⺠Measures can be combined to compare the coherence of different network designs.

Optimal wafer site selection using forward selection component analysis

Reducing wafer metrology continues to be a major target in semiconductor manufacturing efficiency initiatives due to it being a high cost, non-value added operation that impacts on cycle-time and throughput. However, metrology cannot be eliminated completely given the important role it plays in process monitoring and advanced process control. To achieve the required manufacturing precision, measurements are typically taken at multiple sites across a wafer. The selection of these sites is usually based on a priori knowledge of wafer failure patterns and spatial variability with additional sites added over time in response to process issues. As a result, it is often the case that in mature processes significant redundancy can exist in wafer measurement plans. This paper proposes a novel methodology based on Forward Selection Component Analysis (FSCA) for analyzing historical metrology data in order to determine the minimum set of wafer sites needed for process monitoring. The paper also introduces a virtual metrology (VM) based approach for reconstructing the complete wafer profile from the optimal sites identified by FSCA. The proposed methodology is tested and validated on a wafer manufacturing metrology dataset. © 2012 IEEE.

The nesting biology of Ceratina (Hymenoptera: Apidae) in the Niagara Region : new species, nest site selection and parasitism

One of the most common bee genera in the Niagara Region, the genus Ceratina (Hymenoptera: Apidae) is composed of four species, C. dupla, C. calcarata, the very rare C. strenua, and a previously unknown species provisionally named C. near dupla. The primary goal of this thesis was to investigate how these closely related species coexist with one another in the Niagara ~ee community. The first necessary step was to describe and compare the nesting biologies and life histories of the three most common species, C. dupla, C. calcarata and the new C. near dupla, which was conducted in 2008 via nest collections and pan trapping. Ceratina dupla and C. calcarata were common, each comprising 49% of the population, while C. near dupla was rare, comprising only 2% of the population. Ceratina dupla and C. near dupla both nested more commonly in teasel (Dipsacus sp.) in the sun, occasionally in raspberry (Rubus sp.) in the shade, and never in shady sumac (Rhus sp.), while C. calcarata nested most commonly in raspberry and sumac (shaded) and occasionally in teasel (sunny). Ceratina near dupla differed from both C. dupla and C. calcarata in that it appeared to be partially bivoltine, with some females founding nests very early and then again very late in the season. To examine the interactions and possible competition for nests that may be taking place between C. dupla and C. calcarata, a nest choice experiment was conducted in 2009. This experiment allowed both species to choose among twigs from all three substrates in the sun and in the shade. I then compared the results from 2008 (where bees chose from what was available), to where they nested when given all options (2009 experiment). Both C. dupla and C. calcarata had the same preferences for microhabitat and nest substrate in 2009, that being raspberry and sumac twigs in the sun. As that microhabitat and nest substrate combination is extremely rare in nature, both species must make a choice. In nature Ceratina dupla nests more often in the preferred microhabitat (sun), while C. calcarata nests in the preferred substrate (raspberry). Nesting in the shade also leads to smaller clutch sizes, higher parasitism and lower numbers of live brood in C. calcarata, suggesting that C. dupla may be outcompeting C. calcarata for the sunny nesting sites. The development and host preferences of Ceratina parasitoids were also examined. Ceratina species in Niagara were parasitized by no less than eight species of arthropod. Six of these were wasps from the superfamily Chalcidoidea (Hymenoptera), one was a wasp from the family Ichneumonidae (Hymenoptera) and one was a physogastric mite from the family Pyemotidae (Acari). Parasites shared a wide range of developmental strategies, from ichneumonid larvae that needed to consume multiple Ceratina immatures to complete development, to the species from the Eulophidae (Baryscapus) and Encyrtidae (Coelopencyrtus), in which multiple individuals completed development inside a single Ceratina host. Biological data on parasitoids is scarce in the scientific literature, and this Chapter documents these interactions for future research.

Artificial Cavities and Nest Site Selection by Puerto Rican Parrots: a Multiscale Assessment

We examined nest site selection by Puerto Rican Parrots, a secondary cavity nester, at several spatial scales using the nest entrance as the central focal point relative to 20 habitat and spatial variables. The Puerto Rican Parrot is unique in that, since 2001, all known nesting in the wild has occurred in artificial cavities, which also provided us with an opportunity to evaluate nest site selection without confounding effects of the actual nest cavity characteristics. Because of the data limitations imposed by the small population size of this critically endangered endemic species, we employed a distribution-free statistical simulation approach to assess site selection relative to characteristics of used and unused nesting sites. Nest sites selected by Puerto Rican Parrots were characterized by greater horizontal and vertical visibility from the nest entrance, greater density of mature sierra palms, and a more westerly and leeward orientation of nest entrances than unused sites. Our results suggest that nest site selection in this species is an adaptive response to predation pressure, to which the parrots respond by selecting nest sites offering advantages in predator detection and avoidance at all stages of the nesting cycle. We conclude that identifying and replicating the “nest gestalt” of successful nesting sites may facilitate conservation efforts for this and other endangered avian species.

Feeding–Danger Trade-Offs Underlie Stopover Site Selection by Migrants

To migrate successfully, birds need to store adequate fat reserves to fuel each leg of the journey. Migrants acquire their fuel reserves at stopover sites; this often entails exposure to predators. Therefore, the safety attributes of sites may be as important as the feeding opportunities. Furthermore, site choice might depend on fuel load, with lean birds more willing to accept danger to obtain good feeding. Here, we evaluate the factors underlying stopover-site usage by migrant Western Sandpipers (Calidris mauri) on a landscape scale. We measured the food and danger attributes of 17 potential stopover sites in the Strait of Georgia and Puget Sound region. We used logistic regression models to test whether food, safety, or both were best able to predict usage of these sites by Western Sandpipers. Eight of the 17 sites were used by sandpipers on migration. Generally, sites that were high in food and safety were used, whereas sites that were low in food and safety were not. However, dangerous sites were used if there was ample food abundance, and sites with low food abundance were used if they were safe. The model including both food and safety best-predicted site usage by sandpipers. Furthermore, lean sandpipers used the most dangerous sites, whereas heavier birds (which do not need to risk feeding in dangerous locations) used safer sites. This study demonstrates that both food and danger attributes are considered by migrant birds when selecting stopover sites, thus both these attributes should be considered to prioritize and manage stopover sites for conservation.

Patch Scale Nest-Site Selection by Marbled Murrelets (Brachyramphus marmoratus)

The Marbled Murrelet (Brachyramphus marmoratus) is a threatened alcid that nests almost exclusively in old-growth forests along the Pacific coast of North America. Nesting habitat has significant economic importance. Murrelet nests are extremely difficult and costly to find, which adds uncertainty to management and conservation planning. Models based on air photo interpretation of forest cover maps or assessments by low-level helicopter flights are currently used to rank presumed Marbled Murrelet nesting habitat quality in British Columbia. These rankings are assumed to correlate with nest usage and murrelet breeding productivity. Our goal was to find the models that best predict Marbled Murrelet nesting habitat in the ground-accessible portion of the two regions studied. We generated Resource Selection Functions (RSF) using logistic regression models of ground-based forest stand variables gathered at plots around 64 nests, located using radio-telemetry, versus 82 random habitat plots. The RSF scores are proportional to the probability of nests occurring in a forest patch. The best models differed somewhat between the two regions, but include both ground variables at the patch scale (0.2-2.0 ha), such as platform tree density, height and trunk diameter of canopy trees and canopy complexity, and landscape scale variables such as elevation, aspect, and slope. Collecting ground-based habitat selection data would not be cost-effective for widespread use in forestry management; air photo interpretation and low-level aerial surveys are much more efficient methods for ranking habitat suitability on a landscape scale. This study provides one method for ground-truthing the remote methods, an essential step made possible using the numerical RSF scores generated herein.

Effects of species turnover on reserve site selection in a fragmented landscape

Changes in species composition is an important process in many ecosystems but rarely considered in systematic reserve site selection. To test the influence of temporal variability in species composition on the establishment of a reserve network, we compared network configurations based on species data of small mammals and frogs sampled during two consecutive years in a fragmented Atlantic Forest landscape (SE Brazil). Site selection with simulated annealing was carried out with the datasets of each single year and after merging the datasets of both years. Site selection resulted in remarkably divergent network configurations. Differences are reflected in both the identity of the selected fragments and in the amount of flexibility and irreplaceability in network configuration. Networks selected when data for both years were merged did not include all sites that were irreplaceable in one of the 2 years. Results of species number estimation revealed that significant changes in the composition of the species community occurred. Hence, temporal variability of community composition should be routinely tested and considered in systematic reserve site selection in dynamic systems.