Interpretation of Resistivity Piezocone Tests in a Contaminated Municipal Solid Waste Disposal Site

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The resistivity piezocone for high resolution geo-environmental site investigation: A Brazilian example

A suit able decision-making on managing a contaminated site characterization program is strongly dependent of the diagnosis process. A detailed diagnosis can be done based on a Conceptual Site Model (CSM) elaboration using high resolution site characterization tools. The piezocone (CPTu) test is a high resolution tool which allows attaching several specific sensors, like the resistivity probe. This hybrid device is called the resistivity piezocone (RCPTu). A simulated geo-environmental site characterization program was performed on an erosion site using different tools (direct push tools soil samplers, hollow stem auger (HSA) drilling and RCPTu tests) to develop the CSM for a site similar to the Brazilian conditions. It was observed a good agreement between the site profiles interpreted by the different methods. The resistivity sensor attached to the piezocone improved the interpretation and the decision-making process on site was significantly better for the CSM elaboration. The RCPTu test data also allowed identifying the hydrogeological heterogeneities. The present study shows that the RCPTu test is also a useful and powerful tool to development an accurate CSM in a Brazilian condition, especially in an approach that prioritizes high resolution geo-environmental investigation. © 2013 Taylor & Francis Group.

Hydrological and meteorological investigations in a lake near Kangerlussuaq, west Greenland

Few hydrological studies have been made in Greenland, other than on glacial hydrology associated with the ice sheet. Understanding permafrost hydrology and hydroclimatic change and variability, however, provides key information for understanding climate change effects and feedbacks in the Arctic landscape. This paper presents a new extensive and detailed hydrological and meteorological open access dataset, with high temporal resolution from a 1.56 km**2 permafrost catchment with a lake underlain by a through talik close to the ice sheet in the Kangerlussuaq region, western Greenland. The paper describes the hydrological site investigations and utilized equipment, as well as the data collection and processing. The investigations were performed between 2010 and 2013. The high spatial resolution, within the investigated area, of the dataset makes it highly suitable for various detailed hydrological and ecological studies on catchment scale.

Identifying large truck hot spots using crash counts and PDOEs

Large trucks are involved in a disproportionately small fraction of the total crashes but a disproportionately large fraction of fatal crashes. Large truck crashes often result in significant congestion due to their large physical dimensions and from difficulties in clearing crash scenes. Consequently, preventing large truck crashes is critical to improving highway safety and operations. This study identifies high risk sites (hot spots) for large truck crashes in Arizona and examines potential risk factors related to the design and operation of the high risk sites. High risk sites were identified using both state of the practice methods (accident reduction potential using negative binomial regression with long crash histories) and a newly proposed method using Property Damage Only Equivalents (PDOE). The hot spots identified via the count model generally exhibited low fatalities and major injuries but large minor injuries and PDOs, while the opposite trend was observed using the PDOE methodology. The hot spots based on the count model exhibited large AADTs, whereas those based on the PDOE showed relatively small AADTs but large fractions of trucks and high posted speed limits. Documented site investigations of hot spots revealed numerous potential risk factors, including weaving activities near freeway junctions and ramps, absence of acceleration lanes near on-ramps, small shoulders to accommodate large trucks, narrow lane widths, inadequate signage, and poor lighting conditions within a tunnel.

A Dynamic Comprehensive Method for Landslide Control

A slope failure is developed due to progressive external loads and deteriorations of slope geomaterials, thus forming a progressive and dynamic development and occurrence of landslides. Site geological properties and other active factors such as hydrodynamic load and human activities are complex and usually unknown, thus this dynamic development and occurrence of landslides can only be understood through the progressive accumulation of knowledge on the landslides. For such a progressive process, this paper proposes a dynamic comprehensive control method for landslide control. This control method takes full advantage of updated monitoring data and site investigations of landslides, and emphasizes the implementation of possible measures for landslide control at reasonable stages and in different groups. These measures are to prevent the occurrence of a landslide disaster. As a case study, a landslide project at the Panluo open-pit iron mine is analyzed to illustrate this dynamic comprehensive control method.

Mersey & Weaver Fisheries Advisory Committee 20th January, 1976.

This is the report from the Mersey and Weaver Fisheries Advisory Committee meeting, which was held on the 20th January 1976. The report contains information on land drainage representation on local committees, fisheries activities report, fish mortality in the River Dane and River Weaver, and fishing licence duties. The section on the fisheries activities reported by area fisheries officers looks at requests requiring site investigations, stocking, biological surveys work and fish mortalities. The Fisheries Advisory Committee was part of the Regional Water Authorities, in this case the North West Water Authority. This preceded the Environment Agency which came into existence in 1996.

Cartografia de zonamento geotécnico em frentes de escavação de maciços rochosos heterogéneos (túnel do Marão): aplicação da classificação geomecânica GSI|2013

Este estudo pretende discutir a validade da aplicação da mais recente versão do “GSI – Geological Strength Index” (Hoek et al., 2013) em maciços rochosos heterogéneos por aplicação num projecto de obra subterrânea em execução. O estudo envolveu a caracterização geológicageotécnica nas duas frentes de escavação da frente “Poente” da empreitada de construção do Túnel do Marão (N de Portugal) tendo sido cartografados 305 metros no conjunto das duas frentes em 74 avanços consecutivos. Para esta caracterização foram coligidos e uniformizados dados geológicos, geotécnicos e geomecânicos relativos aos levantamentos realizados a cada avanço. A técnica da amostragem linear foi aplicada para a cartografia das descontinuidades que permitiu estabelecer o grau de compartimentação do maciço rochoso. Além disso, procedeu‐se a um tratamento estatístico das descontinuidades, bem como dos parâmetros geológico‐geotécnicos e geomecânicos associados. Os zonamentos geotécnicos e geomecânicos das secções em análise foram realizados sempre em estreita ligação com o conhecimento das características do maciço in situ. Procurou‐se estabelecer termos de comparação entre a versão do GSI|2013 e as versões anteriores (GSI|98, GSI|2001) por aplicação para os avanços cartografados. Pretende‐se que este trabalho contribua para um maior conhecimento da mais recente versão do “Geological Strength Index” (2013) para a sua aplicabilidade em projectos de geoengenharia.

Sampling and analyzing metals in soils for archaeological prospection: a critique

This paper presents a critique of current methods of sampling and analyzing soils for metals in archaeological prospection. Commonly used methodologies in soil science are shown to be suitable for archaeological investigations, with a concomitant improvement in their resolution. Understanding the soil-fraction location, concentration range, and spatial distribution of autochthonous (native) soil metals is shown to be a vital precursor to archaeological-site investigations, as this is the background upon which anthropogenic deposition takes place. Nested sampling is suggested as the most cost-effective method of investigating the spatial variability in the autochthonous metal concentrations. The use of the appropriate soil horizon (or sampling depth) and point sampling are critical in the preparation of a sampling regime. Simultaneous extraction is proposed as the most efficient method of identifying the location and eventual fate of autochthonous and anthropogenic metals, respectively.

Developing a system for down-hole seismic testing together with the CPTU

This paper presents a system for performing down-hole seismic test together with the piezocone test in order to determine the shear wave velocity (Vs) and for calculating the maximum shear modulus (Go); a basic parameter for analyzing the dynamic soil behavior and a reference value of the soil stiffness. The system components are described and tests results for checking the geophone response are also presented, both before and after installation into the probe. The system was used in down-hole tests carried out at three experimental research sites located in the interior of Sao Paulo State, Brazil, where in situ seismic test results are available. The Vs values measured in down-hole tests carried out with this system were consistent with those determined in cross-hole tests and with a commercial seismic piezocone, which enabled to validate the developed system.

Investigação geoambiental com tomada de decisão em campo utilizando o piezocone de resistividade como ferramenta de alta resolução: Marcos Tanaka Riyis. -

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Investigação geoambiental de áreas contaminadas com elaboração do modelo conceitual em campo utilizando ferramentas de alta resolução (HRSC)

The Brazilian geo-environmental site characterizations usually do not provide a suitable Conceptual Site Model (CSM). Site assessments are mostly inappropriate and there is a lack of knowledge about the subsurface environment, generated by inconsistent data that will guide risk analyses and remediation projects full of uncertainties, causing delay on closing cases, inefficient remediation and higher global projects costs. The step of data collection must have high priority to develop a suitable CSM,, and it demands more effective high resolution site characterization (HRSC) tools than the traditional ones and, preferably, the decision-making have to be done in the field. This paper presents and discusses two geo-environmental site characterization results, in which the decision-making was done in the field based on high resolution site characterization (HRSC) used together with the traditional ones. These site investigations provided a significant time saving, allowed the detection of subsoil heterogeneities, a proper understanding of the subsurface environmental, and have generated a solid CSM in real-time. These CSM can subsidize remediation projects based on a more reliable data than those that would be obtained in traditional site investigations, concerned just in following the rules established by the environmental agencies.

Risk-conscious Reconstruction in Pakistan-administered Kashmir. A Case Study of the Chakhama Valley

The Chakhama Valley, a remote area in Pakistan-administered Kashmir, was badly damaged by the 7.6-magnitude earthquake that struck India and Pakistan on 8 October 2005. More than 5% of the population lost their lives, and about 90% of the existing housing was irreparably damaged or completely destroyed. In early 2006, the Aga Khan Development Network (AKDN) initiated a multisector, community-driven reconstruction program in the Chakhama Valley on the premise that the scale of the disaster required a response that would address all aspects of people's lives. One important aspect covered the promotion of disaster risk management for sustainable recovery in a safe environment. Accordingly, prevailing hazards (rockfalls, landslides, and debris flow, in addition to earthquake hazards) and existing risks were thoroughly assessed, and the information was incorporated into the main planning processes. Hazard maps, detailed site investigations, and proposals for precautionary measures assisted engineers in supporting the reconstruction of private homes in safe locations to render investments disaster resilient. The information was also used for community-based land use decisions and disaster mitigation and preparedness. The work revealed three main problems: (1) thorough assessment of hazards and incorporation of this assessment into planning processes is time consuming and often little understood by the population directly affected, but it pays off in the long run; (2) relocating people out of dangerous places is a highly sensitive issue that requires the support of clear and forceful government policies; and (3) the involvement of local communities is essential for the success of mitigation and preparedness.