Representació qualitativa asíncrona de senyals per a la supervisió de sistemes dinàmics

L'objectiu general d'aquest treball és trobar i mostrar una eina que permeti obtenir una representació dels senyals procedents de sistemes dinàmics adequada a les necessitats dels sistemes de Supervisió Experta de processos. Aquest objectiu general es pot subdividir en diverses parts, que són tractades en els diferents capítols que composen el treball i que es poden resumir en els següents punts: En primer lloc, cal conèixer les necessitats dels sistemes de Supervisió: La gran quantitat de dades que provenen dels processos fa necessari el tractament d'aquestes dades per obtenir-ne d'altres, més elaborades, amb un nivell més elevat de representació. La utilització de raonament qualitatiu, pròpia dels éssers humans, comporta la necessitat de representar simbòlicament els senyals, de traduir les dades numèriques en símbols. La Supervisió de sistemes dinàmics comporta que el temps sigui una variable fonamental, la asincronia dels esdeveniments significatius per a la Supervisió fa que les representacions més adequades i útils dels senyals siguin asíncrones. Finalment,l'ús dels coneixements experimentals en la Supervisió dels processos comporta que les representacions més naturals siguin les més útils. Aquestes necessitats fan de la representació dels senyals mitjançant episodis l'eina amb més possibilitats per assolir els objectius que es volen assolir. Per això, es presenta un formalisme que permet descriure i incloure-hi la formalització i les diferents aproximacions a aquest tipus de representació ja existents i, al mateix temps, augmentar-ne la significació a través de característiques dels senyals que no es tenen en compte en les aproximacions ja existents. El següent pas és aprofitar el nou formalisme per obtenir una nova representació amb un grau més gran de significació, cosa que s'aconsegueix representant explícitament les discontinuïtats i els períodes estacionaris o d'estabilitat, molt significatius en Supervisió de processos. Un problema sempre present en el tractament de senyals és el soroll que els afecta. Per aquest motiu es presenta un mètode que permet filtrar el soroll de manera que les representacions resultants quedin afectades el mínim possible per aquest tractament. Finalment, es presenta l'aplicació en línia de les eines descrites. La representació en línia dels senyals comporta el tractament de la incertesa inherent al coneixement parcial del senyal (un episodi no pot ser determinat i caracteritzat completament fins que no s'acaba). L'obtenció de resultats amb determinats graus de certesa és perfectament coherent amb la seva utilització posterior mitjançant Sistemes Experts o altres eines de la IA. Totes les aportacions del treball vénen acompanyades d'exemples i/o aplicacions que permeten observar-ne la utilitat i les limitacions.

Un model de decisió pel tractament mèdic a partir de diagnòstics imprecisos

És un sistema expert que donat un diagnòstic imprecís d’un metge en un malalt amb una malaltia infecciosa i els paràmetres mèdics d’aquest pacient, retorni com a resultat els possibles tractaments que se li poden subministrar al pacient ordenats per un coeficient d’adequadament, que pugui combatre qualsevol dels possibles bacteris que el metge hagi diagnosticat i vigilant de no provocar efectes secundaris. Aquest sistema expert resoldrà casos senzills i pretén ser la base d’una possible extensió per arribar a resoldre casos més complexos.

Recommender System Based on Consumer Product Reviews

Consumer reviews, opinions and shared experiences in the use of a product is a powerful source of information about consumer preferences that can be used in recommender systems. Despite the importance and value of such information, there is no comprehensive mechanism that formalizes the opinions selection and retrieval process and the utilization of retrieved opinions due to the difficulty of extracting information from text data. In this paper, a new recommender system that is built on consumer product reviews is proposed. A prioritizing mechanism is developed for the system. The proposed approach is illustrated using the case study of a recommender system for digital cameras

Abstracting qualitative information for process supervision

Supervisory systems evolution makes the obtaining of significant information from processes more important in the way that the supervision systems' particular tasks are simplified. So, having signal treatment tools capable of obtaining elaborate information from the process data is important. In this paper, a tool that obtains qualitative data about the trends and oscillation of signals is presented. An application of this tool is presented as well. In this case, the tool, implemented in a computer-aided control systems design (CACSD) environment, is used in order to give to an expert system for fault detection in a laboratory plant

I-SS: integrated supervision systems approach based on interactive components

Process supervision is the activity focused on monitoring the process operation in order to deduce conditions to maintain the normality including when faults are present Depending on the number/distribution/heterogeneity of variables, behaviour situations, sub-processes, etc. from processes, human operators and engineers do not easily manipulate the information. This leads to the necessity of automation of supervision activities. Nevertheless, the difficulty to deal with the information complicates the design and development of software applications. We present an approach called "integrated supervision systems". It proposes multiple supervisors coordination to supervise multiple sub-processes whose interactions permit one to supervise the global process

Interacting software-agents to support a kind of expert supervision systems

Expert supervision systems are software applications specially designed to automate process monitoring. The goal is to reduce the dependency on human operators to assure the correct operation of a process including faulty situations. Construction of this kind of application involves an important task of design and development in order to represent and to manipulate process data and behaviour at different degrees of abstraction for interfacing with data acquisition systems connected to the process. This is an open problem that becomes more complex with the number of variables, parameters and relations to account for the complexity of the process. Multiple specialised modules tuned to solve simpler tasks that operate under a co-ordination provide a solution. A modular architecture based on concepts of software agents, taking advantage of the integration of diverse knowledge-based techniques, is proposed for this purpose. The components (software agents, communication mechanisms and perception/action mechanisms) are based on ICa (Intelligent Control architecture), software middleware supporting the build-up of applications with software agent features

Expert supervision based on cases

The paper focuses on taking advantage of large amounts of data that are systematically stored in plants (by means of SCADA systems), but not exploited enough in order to achieve supervisory goals (fault detection, diagnosis and reconfiguration). The methodology of case base reasoning (CBR) is proposed to perform supervisory tasks in industrial processes by re-using the stored data. The goal is to take advantage of experiences, registered in a suitable structure as cam, avoiding the tedious task of knowledge acquisition and representation needed by other reasoning techniques as expert systems. An outlook of CBR terminology and basic concepts are presented. The adaptation of CBR in performing expert supervisory tasks, taking into account the particularities and difficulties derived from dynamic systems, is discussed. A special interest is focused in proposing a general case definition suitable for supervisory tasks. Finally, this structure and the whole methodology is tested in a application example for monitoring a real drier chamber

Modelling the Human Values Scale from Consumers Transactional Data Bases

The main objective of this paper aims at developing a methodology that takes into account the human factor extracted from the data base used by the recommender systems, and which allow to resolve the specific problems of prediction and recommendation. In this work, we propose to extract the user's human values scale from the data base of the users, to improve their suitability in open environments, such as the recommender systems. For this purpose, the methodology is applied with the data of the user after interacting with the system. The methodology is exemplified with a case study

Analysis and evaluation of techniques for the extraction of classes in the ontology learning process

This paper analyzes and evaluates, in the context of Ontology learning, some techniques to identify and extract candidate terms to classes of a taxonomy. Besides, this work points out some inconsistencies that may be occurring in the preprocessing of text corpus, and proposes techniques to obtain good terms candidate to classes of a taxonomy.

Ontologies: a review

En aquest paper, analitzem les principals ontologies amb la finalitat de dibuixar un panorama general d'una de les eines més utilitzades en l'estructuració del coneixement. En primer lloc, presentem una àmplia descripció de les cinc ontologies més difoses entre la comunitat científica dedicada a la gestió de la informació. Seguidament, repassem breument algunes de les eines de gestió que s'utilitzen per crear i actualitzar ontologies. I, finalment, presentem algunes conclusions en relació a la selecció d'una ontologia i d'un sistema de gestió per a la seva utilització en el marc dels projectes vigents del grup IULATERM.

Recommender System Based on Consumer Product Reviews

Consumer reviews, opinions and shared experiences in the use of a product is a powerful source of information about consumer preferences that can be used in recommender systems. Despite the importance and value of such information, there is no comprehensive mechanism that formalizes the opinions selection and retrieval process and the utilization of retrieved opinions due to the difficulty of extracting information from text data. In this paper, a new recommender system that is built on consumer product reviews is proposed. A prioritizing mechanism is developed for the system. The proposed approach is illustrated using the case study of a recommender system for digital cameras

Abstracting qualitative information for process supervision

Supervisory systems evolution makes the obtaining of significant information from processes more important in the way that the supervision systems' particular tasks are simplified. So, having signal treatment tools capable of obtaining elaborate information from the process data is important. In this paper, a tool that obtains qualitative data about the trends and oscillation of signals is presented. An application of this tool is presented as well. In this case, the tool, implemented in a computer-aided control systems design (CACSD) environment, is used in order to give to an expert system for fault detection in a laboratory plant

I-SS: integrated supervision systems approach based on interactive components

Process supervision is the activity focused on monitoring the process operation in order to deduce conditions to maintain the normality including when faults are present Depending on the number/distribution/heterogeneity of variables, behaviour situations, sub-processes, etc. from processes, human operators and engineers do not easily manipulate the information. This leads to the necessity of automation of supervision activities. Nevertheless, the difficulty to deal with the information complicates the design and development of software applications. We present an approach called "integrated supervision systems". It proposes multiple supervisors coordination to supervise multiple sub-processes whose interactions permit one to supervise the global process

Interacting software-agents to support a kind of expert supervision systems

Expert supervision systems are software applications specially designed to automate process monitoring. The goal is to reduce the dependency on human operators to assure the correct operation of a process including faulty situations. Construction of this kind of application involves an important task of design and development in order to represent and to manipulate process data and behaviour at different degrees of abstraction for interfacing with data acquisition systems connected to the process. This is an open problem that becomes more complex with the number of variables, parameters and relations to account for the complexity of the process. Multiple specialised modules tuned to solve simpler tasks that operate under a co-ordination provide a solution. A modular architecture based on concepts of software agents, taking advantage of the integration of diverse knowledge-based techniques, is proposed for this purpose. The components (software agents, communication mechanisms and perception/action mechanisms) are based on ICa (Intelligent Control architecture), software middleware supporting the build-up of applications with software agent features