Simultaneous optimization by neuro-genetic approach for analysis of plant materials by laser induced breakdown spectroscopy

A simultaneous optimization strategy based on a neuro-genetic approach is proposed for selection of laser induced breakdown spectroscopy operational conditions for the simultaneous determination of macronutrients (Ca, Mg and P), micro-nutrients (B, Cu, Fe, Mn and Zn), Al and Si in plant samples. A laser induced breakdown spectroscopy system equipped with a 10 Hz Q-switched Nd:YAG laser (12 ns, 532 nm, 140 mJ) and an Echelle spectrometer with intensified coupled-charge device was used. Integration time gate, delay time, amplification gain and number of pulses were optimized. Pellets of spinach leaves (NIST 1570a) were employed as laboratory samples. In order to find a model that could correlate laser induced breakdown spectroscopy operational conditions with compromised high peak areas of all elements simultaneously, a Bayesian Regularized Artificial Neural Network approach was employed. Subsequently, a genetic algorithm was applied to find optimal conditions for the neural network model, in an approach called neuro-genetic, A single laser induced breakdown spectroscopy working condition that maximizes peak areas of all elements simultaneously, was obtained with the following optimized parameters: 9.0 mu s integration time gate, 1.1 mu s delay time, 225 (a.u.) amplification gain and 30 accumulated laser pulses. The proposed approach is a useful and a suitable tool for the optimization process of such a complex analytical problem. (C) 2009 Elsevier B.V. All rights reserved.

Simultaneous optimization of colloidal stability and interfacial charge transfer efficiency in photocatalytic Pt/CdS nanocrystals

Colloidal stability and efficient interfacial charge transfer in semiconductor nanocrystals are of great importance for photocatalytic applications in aqueous solution since they provide long-term functionality and high photocatalytic activity, respectively. However, colloidal stability and interfacial charge transfer efficiency are difficult to optimize simultaneously since the ligand layer often acts as both a shell stabilizing the nanocrystals in colloidal suspension and a barrier reducing the efficiency of interfacial charge transfer. Here, we show that, for cysteine-coated, Pt-decorated CdS nanocrystals and Na2SO3 as hole scavenger, triethanolamine (TEOA) replaces the original cysteine ligands in situ and prolongs the highly efficient and steady H2 evolution period by more than a factor of 10. It is shown that Na2SO3 is consumed during H2 generation while TEOA makes no significant contribution to the H2 generation. An apparent quantum yield of 31.5%, a turnover frequency of 0.11 H2/Pt/s, and an interfacial charge transfer rate faster than 0.3 ps were achieved in the TEOA stabilized system. The short length, branched structure and weak binding of TEOA to CdS as well as sufficient free TEOA in the solution are the keys to enhancing colloidal stability and maintaining efficient interfacial charge transfer at the same time. Additionally, TEOA is commercially available and cheap, and we anticipate that this approach can be widely applied in many photocatalytic applications involving colloidal nanocrystals.

Comparison of the univariate and multivariate methods in the optimization of experimental conditions for determining Cu, Pb, Ni and Cd in biodiesel by GFAAS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Simultaneous Multiscale Polyaffine Registration by Incorporating Deformation Statistics

Locally affine (polyaffine) image registration methods capture intersubject non-linear deformations with a low number of parameters, while providing an intuitive interpretation for clinicians. Considering the mandible bone, anatomical shape differences can be found at different scales, e.g. left or right side, teeth, etc. Classically, sequential coarse to fine registration are used to handle multiscale deformations, instead we propose a simultaneous optimization of all scales. To avoid local minima we incorporate a prior on the polyaffine transformations. This kind of groupwise registration approach is natural in a polyaffine context, if we assume one configuration of regions that describes an entire group of images, with varying transformations for each region. In this paper, we reformulate polyaffine deformations in a generative statistical model, which enables us to incorporate deformation statistics as a prior in a Bayesian setting. We find optimal transformations by optimizing the maximum a posteriori probability. We assume that the polyaffine transformations follow a normal distribution with mean and concentration matrix. Parameters of the prior are estimated from an initial coarse to fine registration. Knowing the region structure, we develop a blockwise pseudoinverse to obtain the concentration matrix. To our knowledge, we are the first to introduce simultaneous multiscale optimization through groupwise polyaffine registration. We show results on 42 mandible CT images.

Hybrid simulation-optimization based approach for the optimal design of single-product biotechnological processes

In this work, we present a systematic method for the optimal development of bioprocesses that relies on the combined use of simulation packages and optimization tools. One of the main advantages of our method is that it allows for the simultaneous optimization of all the individual components of a bioprocess, including the main upstream and downstream units. The design task is mathematically formulated as a mixed-integer dynamic optimization (MIDO) problem, which is solved by a decomposition method that iterates between primal and master sub-problems. The primal dynamic optimization problem optimizes the operating conditions, bioreactor kinetics and equipment sizes, whereas the master levels entails the solution of a tailored mixed-integer linear programming (MILP) model that decides on the values of the integer variables (i.e., number of equipments in parallel and topological decisions). The dynamic optimization primal sub-problems are solved via a sequential approach that integrates the process simulator SuperPro Designer® with an external NLP solver implemented in Matlab®. The capabilities of the proposed methodology are illustrated through its application to a typical fermentation process and to the production of the amino acid L-lysine.

Optimization of test and maintenance of ageing components consisting of multiple items and addressing effectiveness

There are many models in the literature that have been proposed in the last decades aimed at assessing the reliability, availability and maintainability (RAM) of safety equipment, many of them with a focus on their use to assess the risk level of a technological system or to search for appropriate design and/or surveillance and maintenance policies in order to assure that an optimum level of RAM of safety systems is kept during all the plant operational life. This paper proposes a new approach for RAM modelling that accounts for equipment ageing and maintenance and testing effectiveness of equipment consisting of multiple items in an integrated manner. This model is then used to perform the simultaneous optimization of testing and maintenance for ageing equipment consisting of multiple items. An example of application is provided, which considers a simplified High Pressure Injection System (HPIS) of a typical Power Water Reactor (PWR). Basically, this system consists of motor driven pumps (MDP) and motor operated valves (MOV), where both types of components consists of two items each. These components present different failure and cause modes and behaviours, and they also undertake complex test and maintenance activities depending on the item involved. The results of the example of application demonstrate that the optimization algorithm provide the best solutions when the optimization problem is formulated and solved considering full flexibility in the implementation of testing and maintenance activities taking part of such an integrated RAM model.

Optimization of chemical plant simulation using double collocation

A method has been constructed for the solution of a wide range of chemical plant simulation models including differential equations and optimization. Double orthogonal collocation on finite elements is applied to convert the model into an NLP problem that is solved either by the VF 13AD package based on successive quadratic programming, or by the GRG2 package, based on the generalized reduced gradient method. This approach is termed simultaneous optimization and solution strategy. The objective functional can contain integral terms. The state and control variables can have time delays. Equalities and inequalities containing state and control variables can be included into the model as well as algebraic equations and inequalities. The maximum number of independent variables is 2. Problems containing 3 independent variables can be transformed into problems having 2 independent variables using finite differencing. The maximum number of NLP variables and constraints is 1500. The method is also suitable for solving ordinary and partial differential equations. The state functions are approximated by a linear combination of Lagrange interpolation polynomials. The control function can either be approximated by a linear combination of Lagrange interpolation polynomials or by a piecewise constant function over finite elements. The number of internal collocation points can vary by finite elements. The residual error is evaluated at arbitrarily chosen equidistant grid-points, thus enabling the user to check the accuracy of the solution between collocation points, where the solution is exact. The solution functions can be tabulated. There is an option to use control vector parameterization to solve optimization problems containing initial value ordinary differential equations. When there are many differential equations or the upper integration limit should be selected optimally then this approach should be used. The portability of the package has been addressed converting the package from V AX FORTRAN 77 into IBM PC FORTRAN 77 and into SUN SPARC 2000 FORTRAN 77. Computer runs have shown that the method can reproduce optimization problems published in the literature. The GRG2 and the VF I 3AD packages, integrated into the optimization package, proved to be robust and reliable. The package contains an executive module, a module performing control vector parameterization and 2 nonlinear problem solver modules, GRG2 and VF I 3AD. There is a stand-alone module that converts the differential-algebraic optimization problem into a nonlinear programming problem.

Optimization of cascaded regenerative links based on phase sensitive amplifiers

We develop an analytical method for optimizing phase sensitive amplifiers for regeneration in multilevel phase encoded transmission systems. The model accurately predicts the optimum transfer function characteristics and identifies operating tolerances for different signal constellations and transmission scenarios. The results demonstrate the scalability of the scheme and show the significance of having simultaneous optimization of the transfer function and the signal alphabet. The model is general and can be applied to any regenerative system. © 2013 Optical Society of America.

Optimization method for PSA-based multi-level regenerators

We develop an analytical methodology for optimizing phase regeneration based on phase sensitive amplification. The results demonstrate the scalability of the scheme and show the significance of simultaneous optimization of transfer function and the signal alphabet.

Gold nanoparticles functionalised with fast water exchanging Gd3+ chelates: Linker effects on the relaxivity

The relaxivity displayed by Gd3+ chelates immobilized onto gold nanoparticles is the result of complex interplay between nanoparticle size, water exchange rate and chelate structure. In this work we study the effect of the length of -thioalkyl linkers, anchoring fast water exchanging Gd3+ chelates onto gold nanoparticles, on the relaxivity of the immobilized chelates. Gold nanoparticles functionalized with Gd3+ chelates of mercaptoundecanoyl and lipoyl amide conjugates of the DO3A-N-(-amino)propionate chelator were prepared and studied as potential CA for MRI. High relaxivities per chelate, of the order of magnitude 28-38 mM-1s-1 (30 MHz, 25 ºC) were attained thanks to simultaneous optimization of the rotational correlation time and of the water exchange rate. Fast local rotational motions of the immobilized chelates around connecting linkers (internal flexibility) still limit the attainable relaxivity. The degree of internal flexibility of the immobilized chelates seems not to be correlated with the length of the connecting linkers. Biodistribution and MRI studies in mice suggest that the in vivo behavior of the gold nanoparticles is determined mainly by size. Small nanoparticles (HD= 3.9 nm) undergo fast renal clearance and avoidance of the RES organs while larger nanoparticles (HD= 4.8 nm) undergo predominantly hepatobiliary excretion. High relaxivities, allied to chelate and nanoparticle stability and fast renal clearance in vivo suggests that functionalized gold nanoparticles hold great potential for further investigation as MRI Contrast Agents. This study contributes to understand the effect of linker length on the relaxivity of gold nanoparticles functionalized with Gd3+ complexes. It is a relevant contribution towards “design rules” for nanostructures functionalized with Gd3+ chelates as Contrast Agents for MRI and multimodal imaging.

Conception des réseaux maillés sans fil à multiples-radios multiples-canaux

Généralement, les problèmes de conception de réseaux consistent à sélectionner les arcs et les sommets d’un graphe G de sorte que la fonction coût est optimisée et l’ensemble de contraintes impliquant les liens et les sommets dans G sont respectées. Une modification dans le critère d’optimisation et/ou dans l’ensemble de contraintes mène à une nouvelle représentation d’un problème différent. Dans cette thèse, nous nous intéressons au problème de conception d’infrastructure de réseaux maillés sans fil (WMN- Wireless Mesh Network en Anglais) où nous montrons que la conception de tels réseaux se transforme d’un problème d’optimisation standard (la fonction coût est optimisée) à un problème d’optimisation à plusieurs objectifs, pour tenir en compte de nombreux aspects, souvent contradictoires, mais néanmoins incontournables dans la réalité. Cette thèse, composée de trois volets, propose de nouveaux modèles et algorithmes pour la conception de WMNs où rien n’est connu à l’ avance. Le premiervolet est consacré à l’optimisation simultanée de deux objectifs équitablement importants : le coût et la performance du réseau en termes de débit. Trois modèles bi-objectifs qui se différent principalement par l’approche utilisée pour maximiser la performance du réseau sont proposés, résolus et comparés. Le deuxième volet traite le problème de placement de passerelles vu son impact sur la performance et l’extensibilité du réseau. La notion de contraintes de sauts (hop constraints) est introduite dans la conception du réseau pour limiter le délai de transmission. Un nouvel algorithme basé sur une approche de groupage est proposé afin de trouver les positions stratégiques des passerelles qui favorisent l’extensibilité du réseau et augmentent sa performance sans augmenter considérablement le coût total de son installation. Le dernier volet adresse le problème de fiabilité du réseau dans la présence de pannes simples. Prévoir l’installation des composants redondants lors de la phase de conception peut garantir des communications fiables, mais au détriment du coût et de la performance du réseau. Un nouvel algorithme, basé sur l’approche théorique de décomposition en oreilles afin d’installer le minimum nombre de routeurs additionnels pour tolérer les pannes simples, est développé. Afin de résoudre les modèles proposés pour des réseaux de taille réelle, un algorithme évolutionnaire (méta-heuristique), inspiré de la nature, est développé. Finalement, les méthodes et modèles proposés on été évalués par des simulations empiriques et d’événements discrets.

Procedimenti di ottimizzazione di sistemi smorzati

La presente tesi riguarda lo studio di procedimenti di ottimizzazione di sistemi smorzati. In particolare, i sistemi studiati sono strutture shear-type soggette ad azioni di tipo sismico impresse alla base. Per effettuare l’ottimizzazione dei sistemi in oggetto si agisce sulle rigidezze di piano e sui coefficienti di smorzamento effettuando una ridistribuzione delle quantità suddette nei piani della struttura. È interessante effettuare l’ottimizzazione di sistemi smorzati nell’ottica della progettazione antisismica, in modo da ridurre la deformata della struttura e, conseguentemente, anche le sollecitazioni che agiscono su di essa. Il lavoro consta di sei capitoli nei quali vengono affrontate tre procedure numerico-analitiche per effettuare l’ottimizzazione di sistemi shear-type. Nel primo capitolo si studia l’ottimizzazione di sistemi shear-type agendo su funzioni di trasferimento opportunamente vincolate. In particolare, le variabili di progetto sono le rigidezze di piano, mentre i coefficienti di smorzamento e le masse di piano risultano quantità note e costanti durante tutto il procedimento di calcolo iterativo; per effettuare il controllo dinamico della struttura si cerca di ottenere una deformata pressoché rettilinea. Tale condizione viene raggiunta ponendo le ampiezze delle funzioni di trasferimento degli spostamenti di interpiano pari all’ampiezza della funzione di trasferimento del primo piano. Al termine della procedura si ottiene una ridistribuzione della rigidezza complessiva nei vari piani della struttura. In particolare, si evince un aumento della rigidezza nei piani più bassi che risultano essere quelli più sollecitati da una azione impressa alla base e, conseguentemente, si assiste ad una progressiva riduzione della variabile di progetto nei piani più alti. L’applicazione numerica di tale procedura viene effettuata nel secondo capitolo mediante l’ausilio di un programma di calcolo in linguaggio Matlab. In particolare, si effettua lo studio di sistemi a tre e a cinque gradi di libertà. La seconda procedura numerico-analitica viene presentata nel terzo capitolo. Essa riguarda l’ottimizzazione di sistemi smorzati agendo simultaneamente sulla rigidezza e sullo smorzamento e consta di due fasi. La prima fase ricerca il progetto ottimale della struttura per uno specifico valore della rigidezza complessiva e dello smorzamento totale, mentre la seconda fase esamina una serie di progetti ottimali in funzione di diversi valori della rigidezza e dello smorzamento totale. Nella prima fase, per ottenere il controllo dinamico della struttura, viene minimizzata la somma degli scarti quadratici medi degli spostamenti di interpiano. Le variabili di progetto, aggiornate dopo ogni iterazione, sono le rigidezze di piano ed i coefficienti di smorzamento. Si pone, inoltre, un vincolo sulla quantità totale di rigidezza e di smorzamento, e i valori delle rigidezze e dei coefficienti di smorzamento di ogni piano non devono superare un limite superiore posto all’inizio della procedura. Anche in questo caso viene effettuata una ridistribuzione delle rigidezze e dei coefficienti di smorzamento nei vari piani della struttura fino ad ottenere la minimizzazione della funzione obiettivo. La prima fase riduce la deformata della struttura minimizzando la somma degli scarti quadrarici medi degli spostamenti di interpiano, ma comporta un aumento dello scarto quadratico medio dell’accelerazione assoluta dell’ultimo piano. Per mantenere quest’ultima quantità entro limiti accettabili, si passa alla seconda fase in cui si effettua una riduzione dell’accelerazione attraverso l’aumento della quantità totale di smorzamento. La procedura di ottimizzazione di sistemi smorzati agendo simultaneamente sulla rigidezza e sullo smorzamento viene applicata numericamente, mediante l’utilizzo di un programma di calcolo in linguaggio Matlab, nel capitolo quattro. La procedura viene applicata a sistemi a due e a cinque gradi di libertà. L’ultima parte della tesi ha come oggetto la generalizzazione della procedura che viene applicata per un sistema dotato di isolatori alla base. Tale parte della tesi è riportata nel quinto capitolo. Per isolamento sismico di un edificio (sistema di controllo passivo) si intende l’inserimento tra la struttura e le sue fondazioni di opportuni dispositivi molto flessibili orizzontalmente, anche se rigidi in direzione verticale. Tali dispositivi consentono di ridurre la trasmissione del moto del suolo alla struttura in elevazione disaccoppiando il moto della sovrastruttura da quello del terreno. L’inserimento degli isolatori consente di ottenere un aumento del periodo proprio di vibrare della struttura per allontanarlo dalla zona dello spettro di risposta con maggiori accelerazioni. La principale peculiarità dell’isolamento alla base è la possibilità di eliminare completamente, o quantomeno ridurre sensibilmente, i danni a tutte le parti strutturali e non strutturali degli edifici. Quest’ultimo aspetto è importantissimo per gli edifici che devono rimanere operativi dopo un violento terremoto, quali ospedali e i centri operativi per la gestione delle emergenze. Nelle strutture isolate si osserva una sostanziale riduzione degli spostamenti di interpiano e delle accelerazioni relative. La procedura di ottimizzazione viene modificata considerando l’introduzione di isolatori alla base di tipo LRB. Essi sono costituiti da strati in elastomero (aventi la funzione di dissipare, disaccoppiare il moto e mantenere spostamenti accettabili) alternati a lamine in acciaio (aventi la funzione di mantenere una buona resistenza allo schiacciamento) che ne rendono trascurabile la deformabilità in direzione verticale. Gli strati in elastomero manifestano una bassa rigidezza nei confronti degli spostamenti orizzontali. La procedura di ottimizzazione viene applicata ad un telaio shear-type ad N gradi di libertà con smorzatori viscosi aggiunti. Con l’introduzione dell’isolatore alla base si passa da un sistema ad N gradi di libertà ad un sistema a N+1 gradi di libertà, in quanto l’isolatore viene modellato alla stregua di un piano della struttura considerando una rigidezza e uno smorzamento equivalente dell’isolatore. Nel caso di sistema sheat-type isolato alla base, poiché l’isolatore agisce sia sugli spostamenti di interpiano, sia sulle accelerazioni trasmesse alla struttura, si considera una nuova funzione obiettivo che minimizza la somma incrementata degli scarti quadratici medi degli spostamenti di interpiano e delle accelerazioni. Le quantità di progetto sono i coefficienti di smorzamento e le rigidezze di piano della sovrastruttura. Al termine della procedura si otterrà una nuova ridistribuzione delle variabili di progetto nei piani della struttura. In tal caso, però, la sovrastruttura risulterà molto meno sollecitata in quanto tutte le deformazioni vengono assorbite dal sistema di isolamento. Infine, viene effettuato un controllo sull’entità dello spostamento alla base dell’isolatore perché potrebbe raggiungere valori troppo elevati. Infatti, la normativa indica come valore limite dello spostamento alla base 25cm; valori più elevati dello spostamento creano dei problemi soprattutto per la realizzazione di adeguati giunti sismici. La procedura di ottimizzazione di sistemi isolati alla base viene applicata numericamente mediante l’utilizzo di un programma di calcolo in linguaggio Matlab nel sesto capitolo. La procedura viene applicata a sistemi a tre e a cinque gradi di libertà. Inoltre si effettua il controllo degli spostamenti alla base sollecitando la struttura con il sisma di El Centro e il sisma di Northridge. I risultati hanno mostrato che la procedura di calcolo è efficace e inoltre gli spostamenti alla base sono contenuti entro il limite posto dalla normativa. Giova rilevare che il sistema di isolamento riduce sensibilmente le grandezze che interessano la sovrastruttura, la quale si comporta come un corpo rigido al di sopra dell’isolatore. In futuro si potrà studiare il comportamento di strutture isolate considerando diverse tipologie di isolatori alla base e non solo dispositivi elastomerici. Si potrà, inoltre, modellare l’isolatore alla base con un modello isteretico bilineare ed effettuare un confronto con i risultati già ottenuti per il modello lineare.

Systematic Approach for the selection of monitoring technologies in CO2 geological storage projects. Application of multicriteria decision making

Geologic storage of carbon dioxide (CO2) has been proposed as a viable means for reducing anthropogenic CO2 emissions. Once injection begins, a program for measurement, monitoring, and verification (MMV) of CO2 distribution is required in order to: a) research key features, effects and processes needed for risk assessment; b) manage the injection process; c) delineate and identify leakage risk and surface escape; d) provide early warnings of failure near the reservoir; and f) verify storage for accounting and crediting. The selection of the methodology of monitoring (characterization of site and control and verification in the post-injection phase) is influenced by economic and technological variables. Multiple Criteria Decision Making (MCDM) refers to a methodology developed for making decisions in the presence of multiple criteria. MCDM as a discipline has only a relatively short history of 40 years, and it has been closely related to advancements on computer technology. Evaluation methods and multicriteria decisions include the selection of a set of feasible alternatives, the simultaneous optimization of several objective functions, and a decision-making process and evaluation procedures that must be rational and consistent. The application of a mathematical model of decision-making will help to find the best solution, establishing the mechanisms to facilitate the management of information generated by number of disciplines of knowledge. Those problems in which decision alternatives are finite are called Discrete Multicriteria Decision problems. Such problems are most common in reality and this case scenario will be applied in solving the problem of site selection for storing CO2. Discrete MCDM is used to assess and decide on issues that by nature or design support a finite number of alternative solutions. Recently, Multicriteria Decision Analysis has been applied to hierarchy policy incentives for CCS, to assess the role of CCS, and to select potential areas which could be suitable to store. For those reasons, MCDM have been considered in the monitoring phase of CO2 storage, in order to select suitable technologies which could be techno-economical viable. In this paper, we identify techniques of gas measurements in subsurface which are currently applying in the phase of characterization (pre-injection); MCDM will help decision-makers to hierarchy the most suitable technique which fit the purpose to monitor the specific physic-chemical parameter.

Sensitivity of marine-reserve design to the spatial resolution of socioeconomic data

Socioeconomic considerations should have an important place in reserve design, Systematic reserve-selection tools allow simultaneous optimization for ecological objectives while minimizing costs but are seldom used to incorporate socioeconomic costs in the reserve-design process. The sensitivity of this process to biodiversity data resolution has been studied widely but the issue of socioeconomic data resolution has not previously been considered. We therefore designed marine reserves for biodiversity conservation with the constraint of minimizing commercial fishing revenue losses and investigated how economic data resolution affected the results. Incorporating coarse-resolution economic data from official statistics generated reserves that were only marginally less costly to the fishery than those designed with no attempt to minimize economic impacts. An intensive survey yielded fine-resolution data that, when incorporated in the design process, substantially reduced predicted fishery losses. Such an approach could help minimize fisher displacement because the least profitable grounds are selected for the reserve. Other work has shown that low-resolution biodiversity data can lead to underestimation of the conservation value of some sites, and a risk of overlooking the most valuable areas, and we have similarly shown that low-resolution economic data can cause underestimation of the profitability of some sites and a risk of inadvertently including these in the reserve. Detailed socioeconomic data are therefore an essential input for the design of cost-effective reserve networks.

An efficient knowledge transfer solution to a novel SMDP formalization of a broker's decision problem

This paper introduces a new technique for optimizing the trading strategy of brokers that autonomously trade in re- tail and wholesale markets. Simultaneous optimization of re- tail and wholesale strategies has been considered by existing studies as intractable. Therefore, each of these strategies is optimized separately and their interdependence is generally ignored, with resulting broker agents not aiming for a glob- ally optimal retail and wholesale strategy. In this paper, we propose a novel formalization, based on a semi-Markov deci- sion process (SMDP), which globally and simultaneously op- timizes retail and wholesale strategies. The SMDP is solved using hierarchical reinforcement learning (HRL) in multi- agent environments. To address the curse of dimensionality, which arises when applying SMDP and HRL to complex de- cision problems, we propose an ecient knowledge transfer approach. This enables the reuse of learned trading skills in order to speed up the learning in new markets, at the same time as making the broker transportable across market envi- ronments. The proposed SMDP-broker has been thoroughly evaluated in two well-established multi-agent simulation en- vironments within the Trading Agent Competition (TAC) community. Analysis of controlled experiments shows that this broker can outperform the top TAC-brokers. More- over, our broker is able to perform well in a wide range of environments by re-using knowledge acquired in previously experienced settings.