Direct and indirect effects of species displacements; an invading freshwater amphipod can disrupt leaf litter processing and shredder efficiency

Invasive species may threaten the fundamental role played by native macroinvertebrate shredders in determining energy flow and the trophic dynamics of freshwater ecosystems. Functionally, amphipods have long been regarded as mainly shredders, but they are increasingly recognized as major predators of other macroinvertebrate taxa. Furthermore, intraguild predation (IGP) between native and invasive amphipods underlies many species displacements. We used laboratory mesocosms to investigate what might happen to shredders and leaf-litter processing in water bodies invaded by the highly predatory Ponto-Caspian amphipod Dikerogammarus villosus, which is spreading rapidly throughout Europe and may soon invade the North American Great Lakes. The leaf-shredding efficiency of D. villosus was significantly lower than that of 3 Gammarus species (2 native and 1 invasive) that D. villosus has either already displaced or may be currently displacing in The Netherlands. In addition, D. villosus was a major predator of all of these native and invasive amphipod shredders and of a common isopod shredder Asellus aquaticus. Leaf processing in Gammarus and Asellus mesocosms declined rapidly in the presence of D. villosus and ceased altogether within 4 d because by then, all potential shredders had been killed and consumed. Furthermore, the shredding efficiency of surviving amphipods and isopods declined significantly within 2 d of the release of D. villosus, a result indicating that predator-avoidance behavior may override leaf processing. We discuss the implications of these direct and indirect effects of D. villosus invasions and species displacements on community structure and litter processing in aquatic ecosystems. © 2011 The North American Benthological Society.


--------------------------------------------------------------------------------

Reaxys Database Information|

A laboratory study on feeding plasticity of the shredder Sericostoma vittatum Rambur (Sericostomatidae)

Since litter input and availability of leaves in many streams is highly seasonal in Portugal, we investigated whether Sericostoma vittatum, a typical shredder, was able to grow using alternative food sources. To test this hypothesis we fed S. vittatum with Alnus glutinosa (alder, CPOM, coarse particulate organic matter), leaf powder from A. glutinosa and Acacia dealbata and FPOM (fine particulate organic matter) from a 5th and a > 6th order river, the macrophyte Myriophyllum aquaticum and biofilm. Growth in S. vittatum was significantly influenced by the food item given (ANOVA, P = 0.0082). The food item promoting the highest growth was A. glutinosa, in the form of FPOM (6.48% day(-1)) and CPOM (4.24% day(-1)); all other forms of FPOM and biofilm provided relatively low growth rates (0.77-1.77% day(-1)). The macrophyte M. aquaticum was also used as food source by S. vittatum and promoted intermediate growth (1.96% day(-1)). Neither nitrogen, phosphorus nor caloric content was correlated with growth. However, since higher growth was achieved with alder, in the form of CPOM and FPOM, we concluded that the chemical content of food was more important for S. vittatum than the physical form of such food. This may partially explain why shredders are able to survive when leaves are scarce in streams.

Viability study of automobile shredder residue as fuel

Car Fluff samples collected from a shredding plant in Italy were classified based on particle size, and three different size fractions were obtained in this way. A comparison between these size fractions and the original light fluff was made from two different points of view: (i) the properties of each size fraction as a fuel were evaluated and (ii) the pollutants evolved when each size fraction was subjected to combustion were studied. The aim was to establish which size fraction would be the most suitable for the purposes of energy recovery. The light fluff analyzed contained up to 50 wt.% fines (particle size < 20 mm). However, its low calorific value and high emissions of polychlorinated dioxins and furans (PCDD/Fs), generated during combustion, make the fines fraction inappropriate for energy recovery, and therefore, landfilling would be the best option. The 50–100 mm fraction exhibited a high calorific value and low PCDD/F emissions were generated when the sample was combusted, making it the most suitable fraction for use as refuse-derived fuel (RDF). Results obtained suggest that removing fines from the original ASR sample would lead to a material product that is more suitable for use as RDF.

Solid waste shredding and shredder selection,

Updates Midwest Research Institute 1972 contract report.

Design, manufacturing and maintenance of sugar milling equipment : observations from the 2008 ISSCT Engineering Workshop

An International Society of Sugar Cane Technologists (ISSCT) Engineering Workshop was held in Piracicaba, Brazil from 30 June to 4 July 2008. The theme of the workshop was Design, manufacturing and maintenance of sugar mill equipment. The workshop consisted of a series of technical sessions and site visits. The Brazilian sugar industry is growing rapidly. The growth has occurred as the result of the sugar industry’s position as a key provider of renewable energy in the form of ethanol and, more recently, electricity. The increased focus on electricity is seeing investment in high pressure (100 bar) boilers, cane cleaning plants that allow an increased biomass supply from trash and digesters that produce biogas from dunder. It is clear that the Brazilian sugar industry has a well defined place in the country’s future. The ISSCT workshop provided a good opportunity to gain information from equipment suppliers and discuss new technology that may have application in Australia. The new technologies of interest included IMCO sintered carbide shredder hammer tips, Fives Cail MillMax mills, planetary mill gearboxes, Bosch Projects chainless diffusers, Fives Cail Zuka centrifugals and Vaperma Siftek membrane systems.

Managing milling train operation and performance

This paper discusses the main milling train management tasks necessary for maintaining good extraction performance through a season. The main activities discussed are making week by week decisions about shredder and mill setting adjustments, and selecting preseason mill settings. To maintain satisfactory milling train extraction performance, the main factors affecting extraction should be examined: cane preparation with pol in open cells or shredder torque, delivery nip compaction through the load or torque controller outputs such as roll lift, feed chute flap position or pressure feeder to mill speed ratio, and added water rate. To select mill settings for the coming season, delivery nip compaction and feed chute exit compaction can be inferred from the previous seasons.

Modelling milling train performance

This paper describes recent updates to a milling train extraction model used to assess and predict the performance of a milling train. An extension was made to the milling unit model for the bagasse mills to replace the imbibition coefficient with crushing factor and mixing efficiency. New empirical relationships for reabsorption factor, imbibition coefficient, crushing factor, mixing efficiency and purity ratio were developed. The new empirical relationships were tested against factory measurements and previous model predictions. The updated model has been implemented in the SysCAD process modelling software. New additions to the model implementation include: a shredder model to assess or predict cane preparation, mill and shredder drives for power consumption and an updated imbibition control system to add allow water to be added to intermediate mills.

Stress, shredders and streams: using gammarus energetics to assess water quality

This paper reviews the effectiveness of Gammarus scope for growth (SfG) as an indicator of water quality. In addition, the link between physiological changes and effects at higher levels of biological organisation is addressed. Exposure to a range of toxicants resulted in decreases in Gammarus SfG which were qualitatively and quantitatively correlated with subsequent reductions in growth and reproduction. Reductions in SfG were due principally to a decrease in energy intake (i.e. feeding rate) rather than an increase in energy expenditure. Gammarus pulex is an important shredder in many stream communities and stressed-induced reductions in its feeding activity were correlated with reductions in the processing of leaf litter by a semi-natural stream community. Hence, changes in the physiological energetics of Gammarus provide a general and sensitive indicator of stress which can be linked to effects at higher levels of biological organisation. Under long-term stress and hence prolonged reductions in SfG, animals may adapt by modifying their life-history strategies and producing fewer, larger offspring.

Macrozoobenthos in 2 shallow mesotrophic Chinese lakes with contrasting sources of primary production

Comparative studies on macrozoobenthos were done in 2 shallow mesotrophic lakes in the middle basins of the Yangtze River, China: Lake Biandantang where macrophytes were abundant, and Lake Houhu where macrophytes were scarce Samples were taken monthly at 4 stations in each lake from April 1997 to March 1999, and a total of 67 and 31 tara of macrozoobenthos were recorded in Lake Biandantang and Lake Houhu, respectively. Both annual mean density and biomass of macrozoobenthos were higher in Lake Biandantang than in Lake Houhu: 780 vs 532 indivials/m(2) and 37.1 vs 25.9 g wet mass/m(2), respectively. Abundance of functional feeding groups followed the order: scraper > collector > predator > shredder in Lake Biandantang, and collector > predator > scraper > shredder in Lake Houhu. Only 1 density peak occurred from winter to early spring in Lake Houhu; however, in Lake Biandantang, there were 2 peaks, the winter peak and spring peak. K-dominance curves and Shannon-Wiener, Simpson, and Margelef indices indicated that macrozoobenthos were more diverse in Lake Biandantang than in Lake Houhu Our study suggests that, in shallow lakes, submerged macrophytes are essential for the maintenance of biodiversity of macrozoobenthos mainly because the macrophytes increase habit heterogeneity and availability of suitable food, and may also decrease predation by fish on the macrozoobenthos.

The functional role of Gammarus (Crustacea, Amphipoda): shredders, predators, or both?

Gammarus spp. are traditionally viewed under the functional feeding group (FFG) concept as herbivorous 'shredders'. Although recent studies suggest that Gammarus should also be viewed as predators, this latter role remains contentious. Here, in a laboratory experiment, we objectively examine the balance between shredder and predator roles in a common freshwater species. Gammarus pulex preyed significantly on mayfly nymph, Baetis rhodani, in both the presence and absence of excess leaf material. There was no significant difference in predation where the alternative food, that is, leaf material, was present as compared to absent. Also, G. pulex shredded leaf material in the presence and absence of B. rhodani. However, shredding was significantly reduced where alternative food, that is, B. rhodani prey, was present as compared to absent. Further, G. pulex had a clear leaf species preference. Our results suggest that Gammarus function as both predators and shredders, with the balance of the two roles perhaps depending on food availability and quality. We discuss implications for the use of the FFG concept in assessing freshwater processes, and the role that Gammarus predation may play in structuring macroinvertebrate communities.

Deteção e previsão de falhas em equipamentos de produção industrial

As empresas nacionais deparam-se com a necessidade de responder ao mercado com uma grande variedade de produtos, pequenas séries e prazos de entrega reduzidos. A competitividade das empresas num mercado global depende assim da sua eficiência, da sua flexibilidade, da qualidade dos seus produtos e de custos reduzidos. Para se atingirem estes objetivos é necessário desenvolverem-se estratégias e planos de ação que envolvem os equipamentos produtivos, incluindo: a criação de novos equipamentos complexos e mais fiáveis, alteração dos equipamentos existentes modernizando-os de forma a responderem às necessidades atuais e a aumentar a sua disponibilidade e produtividade; e implementação de políticas de manutenção mais assertiva e focada no objetivo de “zero avarias”, como é o caso da manutenção preditiva. Neste contexto, o objetivo principal deste trabalho consiste na previsão do instante temporal ótimo da manutenção de um equipamento industrial – um refinador da fábrica de Mangualde da empresa Sonae Industria, que se encontra em funcionamento contínuo 24 horas por dia, 365 dias por ano. Para o efeito são utilizadas medidas de sensores que monitorizam continuamente o estado do refinador. A principal operação de manutenção deste equipamento é a substituição de dois discos metálicos do seu principal componente – o desfibrador. Consequentemente, o sensor do refinador analisado com maior detalhe é o sensor que mede a distância entre os dois discos do desfibrador. Os modelos ARIMA consistem numa abordagem estatística avançada para previsão de séries temporais. Baseados na descrição da autocorrelação dos dados, estes modelos descrevem uma série temporal como função dos seus valores passados. Neste trabalho, a metodologia ARIMA é utilizada para determinar um modelo que efetua uma previsão dos valores futuros do sensor que mede a distância entre os dois discos do desfibrador, determinando-se assim o momento ótimo da sua substituição e evitando paragens forçadas de produção por ocorrência de uma falha por desgaste dos discos. Os resultados obtidos neste trabalho constituem uma contribuição científica importante para a área da manutenção preditiva e deteção de falhas em equipamentos industriais.

Alternativa productiva para el aprovechamiento del residuo cachaza

Este trabajo de investigación, busca ofrecer al sector panelero de Colombia nuevas estrategias eco-eficientes y amigables con el medio ambiente, en pro de fortalecer las buenas prácticas agrícolas, que contribuyan con la gestión óptima de los residuos que se crean alrededor de la cadena de producción de la panela. Teniendo en cuenta que la obtención de desechos tanto orgánicos como inorgánicos, genera un impacto medioambiental negativo, se pudo identificar una de estas fuentes de contaminación, a través de un proceso de observación. Ésta es conocida como la Cachaza, la cual se genera dentro de un procedimiento denominado Limpieza del Dulce de Caña. Inicialmente, la caña se muele a través de una trituradora que exprime dulce sin tratamiento, el cual pasa por un ducto hasta regarse sobre una primera paila, donde se le aplica balso. Por medio del calor que produce una hornilla sobre la que se coloca dicha paila, se realiza un proceso de separación, el residuo consolidado en una espuma espesa, comienza a flotar por encima del dulce, siendo extraída a medida que va saliendo y depositada en otros recipientes. Considerando constantes prácticas como el vertimiento de la Cachaza sobre algunas fuentes hídricas (ríos, lagunas, etc.) y cultivos de caña ya fermentados (que elaboran nutrientes negativos sobre los mismos); se profundizará sobre los diferentes impactos ambientales que se originan en éste proceso agroindustrial. El objetivo principal del presente trabajo de investigación, consiste en la implementación de un proyecto de logística inversa, formulando estrategias para el procesamiento de la Cachaza a implementar en un trapiche de la zona de Rio negro a fin de reutilizar este residuo generando subproductos que aporten a la mitigación del impacto ambiental, dando así un valor agregado a toda la cadena. Mediante un análisis costo beneficio se evaluará qué tan fácil o difícil resulta la implementación de dicho proyecto, el cual al incluir un proceso adicional a la cadena de producción de la panela generara un suplemento alimenticio para los equinos y aprovechara el 100% de sus residuos a muy bajo costo.

WCCC 2013: the 20th World Computer Chess Championship

The 20th World Computer Chess Championship took place in Yokohama, Japan during August 2013. It was narrowly won by JUNIOR from JONNY with HIARCS, PANDIX, SHREDDER and MERLIN occupying the remaining positions. There are references to the detailed chess biographies of the engines and engine-authors in the Chessprogramming Wiki. The games, occasionally annotated, are available here.

WCSC 2013: the 3rd World Chess Software Championship

The 3rd World Chess Software Championship took place in Yokohama, Japan during August 2013. It pits chess engines against each other on a common hardware platform - in this instance, the Intel i7 2740 Ivy Bridge with 16GB RAM supporting a potential eight processing threads. It was narrowly won by HIARCS from JUNIOR and PANDIX with JONNY, SHREDDER and MERLIN taking the remaining places. Games, occasionally annotated, are available here.