Possibilities of advanced MAG-welding processes in shipbuilding

In shipbuilding industry welding of primer coated and tack welded steel products cause different issues. Primer coated steel products are commonly used at shipyards to ensure corrosion free storage of products in outdoor conditions. However usage of primer can cause imperfections to welds. To prevent porosity primed steel products are usually welded with tubular welding wires. Tack welds cause commonly interferences in mechanized welding when over welded, which increases costs related to welding due to increased need of preparing and repairing. The aim of this study is to research possibilities of advanced solid wire MAG-welding processes to deal with these two previously mentioned problems. This study concentrates to examine possibilities of MAG-welding, pulse MAG-welding, double pulse MAG-welding, RapidArc and ForceArc processes. Large amount of experiments were made to find out the produced porosity and the ability to over weld tack welds with each process in different circumstances. In welding of primed steel products porosity is caused mainly by hydrogen, CO, CO2, nitrous gases and zinc fumes. It was found in experiments that porosity of MAG-welding can be greatly decreased by using pulse MAG-welding instead. Also reduction of welding speed, usage of air gap and usage of solid wire product with higher amount of alloying elements reduces porosity. Researched advanced MAG-welding processes did not have an improvement into over welding of tack welds. With studied throat thicknesses and welding positions conventional MAG-welding managed better over welding of tack welds than the four studied advanced MAG-welding processes. Studied solid wire MAG-welding processes would be best suited at shipyard for mechanized welding in welding position PB. In welding positions PD and PG tubular welding wires are clearly more productive.

Can previous acid etching increase the bond strength of a self-etching primer adhesive to enamel?

Because a greater research effort has been directed to analyzing the adhesive effectiveness of self etch primers to dentin, the aim of this study was to evaluate, by microtensile testing, the bond strength to enamel of a composite resin combined with a conventional adhesive system or with a self-etching primer adhesive, used according to its original prescription or used with previous acid etching. Thirty bovine teeth were divided into 3 groups with 10 teeth each (n= 10). In one of the groups, a self-etching primer (Clearfil SE Bond - Kuraray) was applied in accordance with the manufacturer's instructions and, in the other, it was applied after previous acid etching. In the third group, a conventional adhesive system (Scotchbond Multipurpose Plus - 3M-ESPE) was applied in accordance with the manufacturer's instructions. The results obtained by analysis of variance revealed significant differences between the adhesive systems (F = 22.31). The self-etching primer (Clearfil SE Bond) presented lower enamel bond strength values than the conventional adhesive system (Scotchbond Multipurpose Plus) (m = 39.70 ± 7.07 MPa) both when used according to the original prescription (m = 27.81 ± 2.64 MPa) and with previous acid etching (m = 25.08 ± 4.92 MPa).

An oligonucleotide primer set for PCR amplification of the complete honey bee mitochondrial genome

Mitochondrial DNA markers have been widely used to address population and evolutionary questions in the honey bee Apis mellifera. Most of the polymorphic markers are restricted to few mitochondrial regions. Here we describe a set of 24 oligonucleotides that allow PCR amplification of the entire mitochondrial genome of the honey bee A. mellifera in 12 amplicons. These fragments have important applications for the study of mitochondrial genes in different subspecies of A. mellifera and as heterospecific probes to characterize mitochondrial genomes in other bee species.

Reducing mean flow time in permutation flow shop

This paper deals with the traditional permutation flow shop scheduling problem with the objective of minimizing mean flowtime, therefore reducing in-process inventory. A new heuristic method is proposed for the scheduling problem solution. The proposed heuristic is compared with the best one considered in the literature. Experimental results show that the new heuristic provides better solutions regarding both the solution quality and computational effort.

Rapid genotyping of loci involved in antifolate drug resistance in Plasmodium falciparum by primer extension

Current methods used to genotype point mutations in Plasmodium falciparum genes involved in resistance to antifolate drugs include restriction digestion of PCR products, allele-specific amplification or sequencing. Here we demonstrate that known point mutations in dihydrofolate reductase and dihydropteroate synthase can be scored quickly and accurately by single-nucleotide primer extension and detection of florescent products on a capillary sequencer. We use this method to genotype parasites in natural infections from the Thai-Myanmar border. This approach could greatly simplify large-scale screening of resistance mutations of the type required for evaluating and updating antimalarial drug treatment policies. The method can be easily adapted to other P. falciparum genes and will greatly simplify scoring of point mutations in this and other parasitic organisms. © 2002 Australian Society for Parasitology Inc. Published by Elsevier Science Ltd. All rights reserved.

Las Memorias del duque de Sully (o los avatares del primer proyecto de unión europea)

El presente artículo se consagra al análisis de la redacción, edición y difusión de las Memorias del duque de Sully. Con ese propósito, la prim-era sección refiere el contexto que rodea la preparación de la obra; la segunda presenta las características generales de la confederación y la tercera profundiza en las discrepancias de sus versiones; en la cuarta, quinta y la sexta se estudian la cronología y las etapas de la redacción, los cambios operados en los manuscritos y sus vías de difusión; la séptima examina el debate sobre la primacía histórica de las Memorias. El artículo pretende reconstruir las condiciones que determinan la elaboración y recepción del primer proyecto paneuropeo.

Servicio civil en Chile, análisis de los directivos de primer nivel jerárquico (2003-13)

Resumen Este artículo analiza los principales factores que condicionan la selección de un directivo público de primer nivel jerárquico en Chile con base en una perspectiva de corte sociológico y el uso del concepto especies de capital. El trabajo realiza un recorrido teórico y descriptivo sobre la modernización del Estado y la profesionalización de la gestión pública en Chile. Posteriormente con una muestra de 45 casos correspondientes a altos directivos nombrados durante el período 2003-13, se trabaja con modelos de regresión logística para determinar los factores que condicionan la selección de estos funcionarios. Se llega a la conclusión que el capital político no es un factor que favorece la selección del actor.

Análisis de productividad, calidad y costos en laboratorios del primer nivel: la biometría hemática

OBJETIVO: Conocer el grado de eficiencia con la que funcionan los laboratorios clínicos del primer nivel mediante una evaluación que integre: la productividad, la calidad y los costos. MÉTODOS: Se seleccionaron 10 laboratorios clínicos de un total de 52 existentes en la Ciudad de México; se utilizó el modelo de Donabedian en sus componentes de estructura, proceso y resultado utilizando la biometría hemática como rastreador. RESULTADOS: Los principales problemas fueron: inadecuada distribución del recurso humano calificado; malas condiciones del material de vidrio; inadecuado proceso analítico y baja productividad. Estos problemas se reflejaron en un incremento de un 200% en los costos unitarios respecto al costo ideal. Solamente son confiables los resultados de 50% de los laboratorios analizados. Veinte porciento de los laboratorios analizados son eficientes. CONCLUSIONES: La solución a los problemas encontrados requiere de estrategias integrales que comprometen a diferentes ámbitos, por lo que su solución se plantea difícil. Se recomienda analizar el costo-beneficio de crear un laboratorio central y dejar a los demás laboratorios como sitios para la toma de muestras exclusivamente.

Sistema múltiplo de apoio à decisão para a programação de sistemas do tipo Job-Shop

Mestrado em Engenharia Electrotécnica e de Computadores

New Shop Floor Control Approaches for Virtual Enterprises

The virtual enterprise paradigm seems a fit response to face market instability and the volatile nature of business opportunities increasing enterprise’s interest in similar forms of networked organisations. The dynamic environment of a virtual enterprise requires that partners in the consortium own reconfigurable shop floors. This paper presents new approaches to shop floor control that meet the requirements of the new industrial paradigms and argues on work re-organization at shop floor level.

A genetic algorithm for the job shop scheduling with a new local search using Monte Carlo method

This paper presents a methodology for applying scheduling algorithms using Monte Carlo simulation. The methodology is based on a decision support system (DSS). The proposed methodology combines a genetic algorithm with a new local search using Monte Carlo Method. The methodology is applied to the job shop scheduling problem (JSSP). The JSSP is a difficult problem in combinatorial optimization for which extensive investigation has been devoted to the development of efficient algorithms. The methodology is tested on a set of standard instances taken from the literature and compared with others. The computation results validate the effectiveness of the proposed methodology. The DSS developed can be utilized in a common industrial or construction environment.

Coalition based approach for shop floor agility – a multiagent approach

Dissertation submitted for a PhD degree in Electrical Engineering, speciality of Robotics and Integrated Manufacturing from the Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia