Sensorless synchronization method for thin-film direct optical broadband monitoring system

Optical monitoring systems are necessary to manufacture multilayer thin-film optical filters with low tolerance on spectrum specification. Furthermore, to have better accuracy on the measurement of film thickness, direct monitoring is a must. Direct monitoring implies acquiring spectrum data from the optical component undergoing the film deposition itself, in real time. In making film depositions on surfaces of optical components, the high vacuum evaporator chamber is the most popular equipment. Inside the evaporator, at the top of the chamber, there is a metallic support with several holes where the optical components are assembled. This metallic support has rotary motion to promote film homogenization. To acquire a measurement of the spectrum of the film in deposition, it is necessary to pass a light beam through a glass witness undergoing the film deposition process, and collect a sample of the light beam using a spectrometer. As both the light beam and the light collector are stationary, a synchronization system is required to identify the moment at which the optical component passes through the light beam.

A Sensorless PMDC Motor Speed Controller with a Logical Overcurrent Protection

A method to control the speed or the torque of a permanent-magnet direct current motor is presented. The rotor speed and the external torque estimation are simultaneously provided by appropriate observers. The sensorless control scheme is based on current measurement and switching states of power devices. The observer’s performances are dependent on the accurate machine parameters knowledge. Sliding mode control approach was adopted for drive control, providing the suitable switching states to the chopper power devices. Despite the predictable chattering, a convenient first order switching function was considered enough to define the sliding surface and to correspond with the desired control specifications and drive performance. The experimental implementation was supported on a single dsPIC and the controller includes a logic overcurrent protection.

Position sensorless electrically excited synchronous motor drive for industrial use based on direct flux linkage and torque control

Synchronous machines with an AC converter are used mainly in large drives, for example in ship propulsion drives as well as in rolling mill drives in steel industry. These motors are used because of their high efficiency, high overload capacity and good performance in the field weakening area. Present day drives for electrically excited synchronous motors are equipped with position sensors. Most drives for electrically excited synchronous motors will be equipped with position sensors also in future. This kind of drives with good dynamics are mainly used in metal industry. Drives without a position sensor can be used e.g. in ship propulsion and in large pump and blower drives. Nowadays, these drives are equipped with a position sensor, too. The tendency is to avoid a position sensor if possible, since a sensor reduces the reliability of the drive and increases costs (latter is not very significant for large drives). A new control technique for a synchronous motor drive is a combination of the Direct Flux Linkage Control (DFLC) based on a voltage model and a supervising method (e.g. current model). This combination is called Direct Torque Control method (DTC). In the case of the position sensorless drive, the DTC can be implemented by using other supervising methods that keep the stator flux linkage origin centered. In this thesis, a method for the observation of the drift of the real stator flux linkage in the DTC drive is introduced. It is also shown how this method can be used as a supervising method that keeps the stator flux linkage origin centered in the case of the DTC. In the position sensorless case, a synchronous motor can be started up with the DTC control, when a method for the determination of the initial rotor position presented in this thesis is used. The load characteristics of such a drive are not very good at low rotational speeds. Furthermore, continuous operation at a zero speed and at a low rotational speed is not possible, which is partly due to the problems related to the flux linkage estimate. For operation in a low speed area, a stator current control method based on the DFLC modulator (DMCQ is presented. With the DMCC, it is possible to start up and operate a synchronous motor at a zero speed and at low rotational speeds in general. The DMCC is necessary in situations where high torque (e.g. nominal torque) is required at the starting moment, or if the motor runs several seconds at a zero speed or at a low speed range (up to 2 Hz). The behaviour of the described methods is shown with test results. The test results are presented for the direct flux linkage and torque controlled test drive system with a 14.5 kVA, four pole salient pole synchronous motor with a damper winding and electric excitation. The static accuracy of the drive is verified by measuring the torque in a static load operation, and the dynamics of the drive is proven in load transient tests. The performance of the drive concept presented in this work is sufficient e.g. for ship propulsion and for large pump drives. Furthermore, the developed methods are almost independent of the machine parameters.

Influence of Travelling Current Linkage Harmonics on Inductance Variation, Torque Ripple and Sensorless Capability of Tooth-Coil Permanent-Magnet Synchronous Machines

This paper introduces an important source of torque ripple in PMSMs with tooth-coil windings (TC-PMSMs). It is theoretically proven that saturation and cross-saturation phenomena caused by the non-synchronous harmonics of the stator current linkage cause a synchronous inductance variation with a particular periodicity. This, in turn, determines the magnitude of the torque ripple and can also deteriorate the performance of signal-injection-based rotor position estimation algorithms. An improved dq- inductance model is proposed. It can be used in torque ripple reduction control schemes and can enhance the self-sensing capabilities of TC-PMSMs

Design of the sensorless pressure control system for a centrifugal pump

This thesis investigates the pressure-based control of a variable-speed-driven pump system in the case of existing output pressure measurement and in the case of sensorless system, where the actual output pressure value is calculated with the steady state estimator.

Speed sensorless vector control of induction machines

A novel rotor velocity estimation scheme applicable to vector controlled induction motors has been described. The proposed method will evaluate rotor velocity, ωr, on-line, does not require any extra transducers or injection of any signals, nor does it employ complicated algorithms such as MRAS or Kalman filters. Furthermore, the new scheme will operate at all velocities including zero with very little error. The procedure employs motor model equations, however all differential and integral terms have been eliminated giving a very fast, low-cost, effective and practical alternative to the current available methods. Simulation results verify the operation of the scheme under ideal and PWM conditions.

Estimation of electrical machine speed using sensorless technology and neural networks

The use of sensorless technologies is an increasing tendency on industrial drivers for electrical machines. The estimation of electrical and mechanical parameters involved with the electrical machine control is used very frequently in order to avoid measurement of all variables related to this process. The cost reduction may also be considered in industrial drivers, besides the increasing robustness of the system, as an advantage of the use of sensorless technologies. This work proposes the use of a recurrent artificial neural network to estimate the speed of induction motor for sensorless control schemes using one single current sensor. Simulation and experimental results are presented to validate the proposed approach. ©2008 IEEE.

Speed Neuro-fuzzy Estimator Applied To Sensorless Induction Motor Control

This work proposes the development of an Adaptive Neuro-fuzzy Inference System (ANFIS) estimator applied to speed control in a three-phase induction motor sensorless drive. Usually, ANFIS is used to replace the traditional PI controller in induction motor drives. The evaluation of the estimation capability of the ANFIS in a sensorless drive is one of the contributions of this work. The ANFIS speed estimator is validated in a magnetizing flux oriented control scheme, consisting in one more contribution. As an open-loop estimator, it is applied to moderate performance drives and it is not the proposal of this work to solve the low and zero speed estimation problems. Simulations to evaluate the performance of the estimator considering the vector drive system were done from the Matlab/Simulink(R) software. To determine the benefits of the proposed model, a practical system was implemented using a voltage source inverter (VSI) to drive the motor and the vector control including the ANFIS estimator, which is carried out by the Real Time Toolbox from Matlab/Simulink(R) software and a data acquisition card from National Instruments.

Le macchine multifase nelle applicazioni Sensorless:indagine teorico-sperimentale di un azionamento basato su DSP per macchine asincrone eptafase

Fino ad un recente passato, le macchine elettriche di tipo trifase costituivano l’unica soluzione in ambito industriale per la realizzazione di azionamenti di grande potenza. Da quando i motori sono gestiti da convertitori elettronici di potenza si è ottenuto un notevole passo in avanti verso l’innovazione tecnologica. Infatti, negli ultimi decenni, le tecnologie sempre più all’avanguardia e l’aumento dell’utilizzo dell’elettronica, sia in campo civile quanto in quello industriale, hanno contribuito a una riduzione dei costi dei relativi componenti; questa situazione ha permesso di utilizzare tecnologie elaborate che in passato avevano costi elevati e quindi risultavano di scarso interesse commerciale. Nel campo delle macchine elettriche tutto questo ha permesso non solo la realizzazione di azionamenti alimentati e controllati tramite inverter, in grado di garantire prestazioni nettamente migliori di quelle ottenute con i precedenti sistemi di controllo, ma anche l’avvento di una nuova tipologia di macchine con un numero di fasi diverso da quello tradizionale trifase, usualmente impiegato nella generazione e distribuzione dell’energia elettrica. Questo fatto ha destato crescente interesse per lo studio di macchine elettriche multifase. Il campo di studio delle macchine multifase è un settore relativamente nuovo ed in grande fermento, ma è già possibile affermare che le suddette macchine sono in grado di fornire prestazioni migliori di quelle trifase. Un motore con un numero di fasi maggiore di tre presenta numerosi vantaggi: 1. la possibilità di poter dividere la potenza su più fasi, riducendo la taglia in corrente degli interruttori statici dell’inverter; 2. la maggiore affidabilità in caso di guasto di una fase; 3. la possibilità di sfruttare le armoniche di campo magnetico al traferro per ottenere migliori prestazioni in termini di coppia elettromagnetica sviluppata (riduzione dell’ampiezza e incremento della frequenza della pulsazione di coppia); 4. l’opportunità di creare azionamenti elettrici multi-motore, collegando più macchine in serie e comandandole con un unico convertitore di potenza; 5. Maggiori e più efficaci possibilità di utilizzo nelle applicazioni Sensorless. Il presente lavoro di tesi, ha come oggetto lo studio e l’implementazione di una innovativa tecnica di controllo di tipo “sensorless”, da applicare in azionamenti ad orientamento di campo per macchine asincrone eptafase. Nel primo capitolo vengono illustrate le caratteristiche e le equazioni rappresentanti il modello della macchina asincrona eptafase. Nel secondo capitolo si mostrano il banco di prova e le caratteristiche dei vari componenti. Nel terzo capitolo sono rappresentate le tecniche di modulazione applicabili per macchine multifase. Nel quarto capitolo vengono illustrati il modello del sistema implementato in ambiente Simulink ed i risultati delle simulazioni eseguite. Nel quinto capitolo viene presentato il Code Composer Studio, il programma necessario al funzionamento del DSP. Nel sesto capitolo, sono presentati e commentati i risultati delle prove sperimentali.

Nonlinear Observers for Sensorless Control of Permanent Magnet Synchronous Motors

In this thesis, the industrial application of control a Permanent Magnet Synchronous Motor in a sensorless configuration has been faced, and in particular the task of estimating the unknown “parameters” necessary for the application of standard motor control algorithms. In literature several techniques have been proposed to cope with this task, among them the technique based on model-based nonlinear observer has been followed. The hypothesis of neglecting the mechanical dynamics from the motor model has been applied due to practical and physical considerations, therefore only the electromagnetic dynamics has been used for the observers design. First observer proposed is based on stator currents and Stator Flux dynamics described in a generic rotating reference frame. Stator flux dynamics are known apart their initial conditions which are estimated, with speed that is also unknown, through the use of the Adaptive Theory. The second observer proposed is based on stator currents and Rotor Flux dynamics described in a self-aligning reference frame. Rotor flux dynamics are described in the stationary reference frame exploiting polar coordinates instead of classical Cartesian coordinates, by means the estimation of amplitude and speed of the rotor flux. The stability proof is derived in a Singular Perturbation Framework, which allows for the use the current estimation errors as a measure of rotor flux estimation errors. The stability properties has been derived using a specific theory for systems with time scale separation, which guarantees a semi-global practical stability. For the two observer ideal simulations and real simulations have been performed to prove the effectiveness of the observers proposed, real simulations on which the effects of the Inverter nonlinearities have been introduced, showing the already known problems of the model-based observers for low speed applications.

Controllo sensorless di attuatori tubolari pentafase

L'elaborato si pone l'obiettivo di sviluppare un controllo sensorless di posizione per un attuatore tubolare pentafase anisotropo a magneti permanenti. Le peculiarità degli attuatori tubolari sono molteplici: assenza di organi di trasmissione del moto; compattezza; elevate densità di forza e prestazioni nella dinamica, con una più ampia banda passante per il sistema di controllo; maggiore precisione, risoluzione, ripetibilità ed affidabilità. Tale tipologia di macchina è pertanto molto interessante in diverse applicazioni quali robotica, automazione, packaging, sistemi di posizionamento ecc., ed è altresì promettente nei settori aerospaziale e automotive. L'azionamento in studio è inoltre di tipo multifase. In tal caso si ottengono diversi vantaggi: possibilità di suddividere la potenza su un numero elevato di rami del convertitore; capacità di lavorare in condizioni di guasto; incremento della densità di coppia della macchina; possibilità di controllare in modo indipendente e con un solo inverter più macchine collegate in serie. Prestazioni migliori della macchina si possono ottenere con un opportuno sistema di controllo. Nel caso di azionamenti a magneti permanenti risulta particolarmente attraente il controllo di tipo sensorless della posizione rotorica, in alternativa ad un encoder o un resolver. Questo aumenta l'affidabilità, riduce i costi e diminuisce l'ingombro complessivo dell'azionamento. Appare molto interessante l'utilizzo di un azionamento tubolare di tipo multifase, e ancor più lo sviluppo di un apposito controllo di posizione di tipo sensorless. L’algoritmo sensorless di stima della posizione dell’attuatore può essere sviluppato partendo dall’anisotropia di macchina, sfruttando la possibilità peculiare delle macchine multifase di estrarre informazioni sullo stato attraverso i molteplici gradi di libertà presenti. Nel caso in questione si tratta del controllo della terza armonica spaziale del campo magnetico al traferro. Fondamentale è la definizione di un modello matematico in grado di rappresentare in modo opportuno l’anisotropia di macchina. In letteratura non sono ancora presenti modelli adatti a descrivere il dispositivo in questione; pertanto una parte essenziale della tesi è stata dedicata a definire tale modello e a verificarne la validità. Partendo dal modello è possibile dunque sviluppare un appropriato algoritmo di controllo sensorless e rappresentare in simulink l'intero azionamento. Nella parte conclusiva del lavoro di tesi vengono presentate le prove sperimentali, finalizzate alla determinazione dei parametri di macchina e alla verifica del funzionamento del sistema di controllo. Infine sono confrontati i risultati ottenuti rispetto a quelli realizzati con controlli di tipo tradizionale.

Stability analysis of a mono inverter dual sensorless motors system

When a single brush-less dc motor is fed by an inverter with a sensor-less algorithm embedded in the switching controller, the system exhibits a linear and stable output in terms of the speed and torque. However, with two motors modulated by the same inverter, the system is unstable and rendered useless for a steady application, unless provided with some resistive damping on the supply lines. The project discusses and analysis the stability of such a system through simulations and hardware demonstrations and also will discuss a method to derive the values of these damping.

Sensorless explicit model predictive control for multi-phase buck converters with variable output voltage

The purpose of this paper is to use the predictive control to take advantage of the future information in order to improve the reference tracking. The control attempts to increase the bandwidth of the conventional regulators by using the future information of the reference, which is supposed to be known in advance. A method for designing a controller is also proposed. A comparison in simulation with a conventional regulator is made controlling a four-phase Buck converter. Advantages and disadvantages are analyzed based on simulation results.