1-Naphthyl- and mesityltellurium(IV,II) derivatives of small bite chelating organic ligands: effect of steric bulk and intramolecular secondary bonding interaction on molecular geometry and supramolecular association

The synthesis and characterization of unsymmetric diorganotellurium compounds containing a sterically demanding I-naphthyl or
mesitylligand and a small bite chelating organic ligand capable of 1,4-Te···N(O) intramolecular interaction is described. The reaction
of ArTeCl₃ (Ar = I-C_lOH₇, Np; 2,4,6-Me₃C₆H_2' Mes) with (SB)HgCI [SB = the Schiff base, 2-(4,4'-N0₂C₆H₄CH=NC₆H₃-Me)] or a methyl ketone (RCOCH₃) afforded the corresponding dichlorides (SB)ArTeCI₂ (Ar = Np, 1Aa; Mes, 1Ba) or (RCOCH₂)ArTeCl₂ (Ar = Np; R = Ph (2Aa), Me (3Aa), Np (4Aa); Ar = Mes, R = Ph (2Ba)). Reduction of 1Aa and 1Ba by Na₂S₂0₅ readily gave the tellurides (SB)ArTe (Ar = Np (1A), Mes, (1B) but that of dichlorides derived from methylketones was complicated due to partial decomposition to tellurium powder and diarylditelluride (Ar₂Te₂), resulting in poor yields of the corresponding tellurides 2A, 2B and 3A. Oxidation of the isolated tellurides with S0₂Cl₂, Br₂ and I₂ yielded the corresponding dihalides. All the synthesized compounds have been characterized with the help of IR, ¹H, ^l3C, and ¹²⁵Te NMR and in the case of 2Aa, and 2Ba by X-ray crystallography. Appearance of only one ¹²⁵Te signal indicated that the unsymmetric derivatives were stable to disproportionation to symmetric species. Intramolecular 1,4-Te· . ·0 secondary bonding interactions (SBIs) are exhibited in the crystal structures of both the tellurium(IV) dichlorides, 2Aa, and 2Ba. Steric repulsion of the mesityl group in the latter dominates over lone pair-bond pair repulsion, resulting in significant widening of the equatorial C-Te-C angle. This appears to be responsible for the lack of Te· . ·CI involved supramolecular associations in the crystal structure of 2Ba.

Buildup of gold nanoparticle multilayer thin films based on the covalent-bonding interaction between boronic acids and polyols

A novel method for the fabrication of gold nanoparticle multilayer films based on the covalent-bonding interaction between boronic acid and polyols, poly(vinyl alcohol) (PVA), was developed. The multilayer buildup was monitored by UV-vis absorbance, spectroscopy, which showed a linear increase of the film absorbance with the number of adsorbed Au layers and indicated the stepwise and uniform assembling process. The atomic force microscopy (AFM) image showed that a compact gold multilayer thin film was successfully assembled. The residual boronic acid group on the surface of thin film Could incorporate glycosylated-protein horseradish peroxidase (HRP), and good catalytic activity for H2O2 could be observed.

Secondary bonding in para-substituted diphenyltellurium dichlorides (p-XC6H4)2TeCl2 (X = H, Me, MeO) probed by 125Te MAS NMR spectroscopy. Crystal and molecular structure of (p-MeC6H4)2TeCl2

The solid-state structures of the previously known para-substituted diphenyltellurium dichlorides, (p-XC₆H₄)₂TeCl₂ (X=H (1), Me (2), MeO (3)) were investigated by ¹²⁵Te MAS NMR spectroscopy and in case of 2 by single crystal X-ray diffraction. The ¹²⁵Te-NMR shielding anisotropy (SA) was studied by tensor analyses based on relative intensities of the observed spinning sidebands. Solid-state NMR parameters, namely the isotropic chemical shift (δ_iso), anisotropy (ζ) and asymmetry (η), were discussed in relation to the molecular structures established by X-ray crystallography. The asymmetry (η) was found to be particularly sensitive to structural differences stemming mostly from the diverse secondary Te...Cl interactions, but no correlation with geometric parameters could be established.

The utility of hypercoordination and secondary bonding for the synthesis of a binary organoelement oxo cluster

A strategy for the preparation of the otherwise difficult to obtain binary organometallic oxides containing two heavy main group elements is described and exemplified by the synthesis of [(p-MeOC₆H₄)₂Te(OSnt-Bu₂OH)₂]₂.

Acylmethyl(aryl)tellurium(IV,II) derivatives : intramolecular secondary bonding and steric rigidity

Electrophilic substitution of acylmethanes (methyl ketones), RCOCH3 (R = i-Pr, 1; Et, 2; Me, 3) with aryltellurium trichlorides, ArTeCl3 (Ar = 1-C10H7, Np, A; 2,4,6-Me3C6H2, Mes, B; 4-MeOC6H4, Anisyl, C) under mild conditions affords the corresponding acylmethyl(aryl)tellurium dichlorides (RCOCH2)ArTeCl2. Reduction of the dichlorides, gives tellurides, (i-PrCOCH2)ArTe, 1A–1C, which give the corresponding dihalides, (i-PrCOCH2)ArTeX2 (X = Cl, 1Aa–1Ca; Br, 1Ab–1Cb; I, 1Ac–1Cc) when reacted in situ with SO2Cl2, Br2 or I2. The unsymmetric tellurides are labile towards disproportionation and attempts to obtain them lead to the isolation of Ar2Te2 except in the case of (i-PrCOCH2)MesTe ( 1B), which represents an interesting example of a kinetically stable aryl(alkyl)telluride. All the dihalomesityltellurium(IV) derivatives show separate 1H and 13C NMR signals for the ortho methyls irrespective of the sizes of R and X ligands. The telluride, 1B with free rotation about Te–C(mesityl) bond shows, like the unsymmetric diorganotellurium(IV) dihalides, only one 125Te NMR signal. The 1,4-chelating behavior of the acyl ligand among diorganotellurium(IV) compounds is inferred from the X-ray diffraction data for 1Aa, 1Ac, 1Ba, 1Bb, 1Ca and 1Cc which are indicative of the presence of intramolecular TeO secondary bonding interactions (SBIs) at least in the solid state. As a consequence, steric repulsion in case of the mesityltellurium(IV) derivatives, 1Ba and 1Bb, reaches the threshold so as to cause loss of two-fold rotational symmetry of the mesityl group about the Te–C(mesityl) bond axis. Intermolecular C–HO H-bonding interactions appears to stabilize such an orientation of the aryl ligand at least in the solid state.

The reactivity of diorganotellurium oxides towards phenol and o-nitrophenol. Hypervalent and secondary bonding of four different product classes

The reaction of the diorganotellurium oxides R2TeO (R = Ph, p-MeOC6H4, p-Me2NC6H4) with phenol and o-nitrophenol produces diorganotellurium hydroxy phenolates, R2Te(OH)OPh (1, R = Ph; 2, R = p-MeOC6H4; 3, R = p-Me2NC6H4), diorganotellurium bis(phenolates) R2Te(OPh)2 (4, R = Ph; 5, R = p-MeOC6H4; 6, R = p-Me2NC6H4), tetraorganoditelluroxane bis(o-nitrophenolates), (R′O)R2TeOTeR2(OR′) (7, R = p-MeOC6H4; 8, R = p-Me2NC6H4; R′ = o-NO2C6H4), and a hexaphenyltritelluroxane bis(o-nitrophenolate) (R′O)Ph2TeOTePh2OTePh2(OR′) (9, R′ = o-NO2C6H4), respectively. The redistribution reactions of R2Te(OPh)2 (4, R = Ph; 5, R = p-MeOC6H4; 6, R = p-Me2NC6H4) with the corresponding diorganotellurium oxides R2TeO and diorganotellurium dichlorides R2TeCl2 (R = Ph, p-MeOC6H4, p-Me2NC6H4) give rise to the formation of moisture sensitive tetraorganoditelluroxane bis(phenolates) (PhO)R2TeOTeR2(OPh) (10, R = Ph; 11, R = p-MeOC6H4; 12, R = p-Me2NC6H4) and diorganotellurium chloro phenolates, R2Te(Cl)OPh (13, R = Ph; 14, R = p-MeOC6H4; 15, R = p-Me2NC6H4), respectively. The reaction of the diorganotellurium oxides R2TeO with the corresponding diorganotellurium dichlorides R2TeCl2 (R = Ph, p-MeOC6H4, p-Me2NC6H4) affords tetraorganoditelluroxane dichlorides ClR2TeOTeR2Cl (16, R = Ph; 17, R = p-MeOC6H4; 18, R = p-Me2NC6H4) as air-stable solid materials. The reactivity of 1–18 can be rationalized by the kinetic lability of the Te–O and Te–Cl bonds. Compounds 1–18 have been characterized by solution and solid-state 125Te NMR spectroscopy and 2, 4, 6, 7, 9, 17, and 18 have also been analyzed by X-ray crystallography.

Structure-activity relationship of mastoparan analogs: effects of the number and positioning of Lys residues on secondary structure, interaction with membrane-mimetic systems and biological activity

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Hydrotelluration of acetylenic esters: structural characterization of stereoisomers of methyl/ethyl beta-(aryltelluro)acrylates

Synthesis and complete characterization of some ester functionalized vinylic tellurides bearing an aryl ligand with varying steric and electronic effects bound to tellurium is described. Hydrotelluration of methyl propiolate using Ar2Te2/NaBH4 in methanol results in a mixture of stereoisomers of methyl β-(aryltelluro)acrylates, ArTeCH[double bond, length as m-dash]CHCOOMe (Ar = 4-MeOC6H4, 1A; 1-C10H7, 2A; 2,4,6-Me3C6H2, 3A; C5H5FeC5H4, 4A; 4-Me2NC6H4, 5A; and 2-C4H3S, 6A). The same reaction in ethanol provides isomeric mixtures of the ethyl esters ArTeCH[double bond, length as m-dash]CHCOOEt (1B–6B). However, in the reactions between methyl propiolate and Ar2Te2 (Ar = 2,4,6-Me3C6H2, 4-Me2NC6H4) in isopropanol or t-butanol, no exchange of alkyl groups between the parent ester and the solvent is observed, instead detelluration of the Ar2Te2 to Ar2Te is a competing reaction along with almost exclusive formation of the (Z)-isomers (3Aa, 5Aa). The geometry of the separated stereoisomers is established in solution, with the help of 1H, 13C and 125Te NMR spectrometry. Of particular interest is the observation that 125Te chemical shifts {deshielded in (Z) compared to (E); Δδ = 106–136 ppm} and the geminal heteronuclear coupling constants {2J(1H–125Te) values for (E) are more than seven times that of the corresponding (Z) isomer} can be used to distinguish between liquid isomers. Structural characterization in the solid state by single-crystal X-ray diffraction for the 2Ba, 3Aa, 3Ba, 5Aa, 8 (Z)-isomers as well as for both stereoisomers of 4-Me2NC6H4TeCH[double bond, length as m-dash]CHCOOEt (5Ba and 5Bb) is also presented. The carbonyl O atom of the ester group is invariably involved, at least in the solid state, in a secondary bonding interaction with the Te(II) atom. While an intermolecular Te⋯O interaction gives rise to one-dimensional supramolecular arrays in the crystal lattice of 5Bb with (E) configuration, it is realized intramolecularly in the case of the (Z)-isomers due to the cis position of the chalcogen atoms.

Folding a Polymer via Two-Point Interaction with an External Folding Agent: Use of H-Bonding and Charge-Transfer Interactions

A polymer containing electron-rich aromatic donors (1,5-dialkoxynaphthalene (DAN)) was coerced into a folded state by an external folding agent that contained an electron-deficient aromatic acceptor (pyromellitic diimide (PM)) unit. The donor-containing polymer was designed to carry a tertiary amine moiety in the linking segment, which served as an H-bonding site for reinforcing the interaction with the acceptor containing folding agent that also bore a carboxylic acid group. The H-bonding interaction of the carboxylic acid and the tertiary amine brings the PDI unit between two adjacent DAN units along the polymer backbone to induce charge-transfer (C-T) interactions, and this in turn causes the polymer chain to form a pleated structure. Evidence for the formation of such a pleated structure was obtained from NMR titration studies and also by monitoring the C-T band in their UV-visible spectra. By varying the length of the segment that links the PDI acceptor to the carboxylic acid group, we showed that the most effective folding agent was the one that had a single carbon spacer, as evident from the highest value of the association constant. Control experiments with propionic acid clearly demonstrated the importance of the additional C-T interactions for venerating the folded structures. Further, solution viscosity measurements in the presence of varying amounts of the folding agent revealed a gradual stiffening of the chain in the case of the PDI carrying carboxylic acid, whereas no such affect was seen in the case of simple propionic acid. These observations were supported by D FT calculations of the interactions of a dimeric model of the polymer with the various folding agents; here too the stability of the complex was seen to be highest in the case of the single carbon spacer.

The interplay of secondary Hg⋯S, Hg⋯N and Hg⋯π bonding interactions in supramolecular structures of phenylmercury(ii) dithiocarbamates

Three new phenylmercury(II) and one mercury(II) dithiocarbamate complexes viz. PhHg S2CN(PyCH2) Bz (1), PhHg S2CN(PyCH2)CH3 (2), PhHg S2CN(Bz)CH3 (3), and [Hg (NCS2(PyCH2)Bz)(2)] (4) (Py = pyridine; Bz = benzyl) have been synthesized and characterized by elemental analyses, IR, electronic absorption, H-1 and C-13 NMR spectroscopy. The crystal structures of 1, 2 and 3 showed a linear S-Hg-C core at the centre of the molecule, in which the metal atom is bound to the sulfur atom of the dithiocarbamate ligand and a carbon atom of the aromatic ring. In contrast the crystal structure of 4 showed a linear S-Hg-S core at the Hg(II) centre of the molecule. Weak intermolecular Hg center dot center dot center dot N (Py) interactions link molecules into a linear chain in the case of 1, whereas chains of dimers are formed in 2 through intermolecular Hg center dot center dot center dot N (Py) and Hg center dot center dot center dot S interactions. 3 forms a conventional face-to-edge dimeric structure through intermolecular Hg center dot center dot center dot S secondary bonding and 4 forms a linear chain of dimers through face-to-face Hg center dot center dot center dot S secondary bonding. In order to elucidate the nature of these secondary bonding interactions and the electronic absorption spectra of the complexes, ab initio quantum chemical calculations at the MP2 level and density functional theory calculations were carried out for 1-3. Complexes 1 and 2 exhibited photoluminescent properties in the solid state as well as in the solution phase. Studies indicate that Hg center dot center dot center dot S interactions decrease and Hg center dot center dot center dot N interactions increase the chances of photoluminescence in the solid phase

Structural Systematics of the Anhydrous 1:1 Proton-Transfer Compounds of 3,5-Dinitrosalicylic Acid with Aniline and Monosubstituted Anilines

The crystal structures of the proton-transfer compounds of 3,5-dinitrosalicylic acid (DNSA) with a series of aniline-type Lewis bases [aniline, 2-hydroxyaniline, 2-methoxyaniline, 3-methoxyaniline, 4-fluoroaniline, 4-chloroaniline and 2-aminoaniline] have been determined and their hydrogen-bonding systems analysed. All are anhydrous 1:1 salts: [(C6H8N)+(C7H3N2O7)-], (1), [(C6H8NO)+(C7H3N2O7)-], (2), [(C7H10NO)+(C7H3N2O7)-], (3), [(C7H10NO)+(C7H3N2O7)-], (4), [(C6H7FN)+(C7H3N2O7)-], (5), [(C6H7ClN)+(C7H3N2O7)-], (6), and [(C6H9N2)+(C7H3N2O7)-], (7) respectively. Crystals of 1 and 6 are triclinic, space group P-1 while the remainder are monoclinic with space group either P21/n (2, 4, 5 and 7) or P21 (3). Unit cell dimensions and contents are: for 1, a = 7.2027(17), b = 7.5699(17), c = 12.9615(16) Å, α = 84.464(14), β = 86.387(15), γ = 75.580(14)o, Z = 2; for 2, a = 7.407(3), b = 6.987(3), c = 27.653(11) Å, β = 94.906(7)o, Z = 4; for 3, a = 8.2816(18), b = 23.151(6), c = 3.9338(10), β = 95.255(19)o, Z = 2; for 4, a = 11.209(2), b = 8.7858(19), c = 15.171(3) Å, β = 93.717(4)o, Z = 4; for 5, a = 26.377(3), b = 10.1602(12), c = 5.1384(10) Å, β = 91.996(13)o, Z = 4; for 6, a = 11.217(3), b = 14.156(5), c = 4.860(3) Å, α = 99.10(4), β = 96.99(4), γ = 76.35(2)o, Z = 2; for 7, a = 12.830(4), b = 8.145(3), c = 14.302(4) Å, β = 102.631(6)o, Z = 4. In all compounds at least one primary linear intermolecular N+-H…O(carboxyl) hydrogen-bonding interaction is present which, together with secondary hydrogen bonding results in the formation of mostly two-dimensional network structures, exceptions being with compounds 4 and 5 (one-dimensional) and compound 6 (three-dimensional). In only two cases [compounds 1 and 4], are weak cation-anion or cation-cation π-π interactions found while weak aromatic C-H…O interactions are insignificant. The study shows that all compounds fit the previously formulated classification scheme for primary and secondary interactive modes for proton-transfer compounds of 3,5-dinitrosalicylic acid but there are some unusual variants.