Construção e desenvolvimento de um secador de leito pulso-fluidizado para secagem de pastas e polpas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo da influência da proporção de um mix leite/popa da marcacujá na produção de pó obtido por três diferentes tipos de secagem

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Adsorção em flocos de materiais adsorventes pulverizados e uso em reator de leito expandido/fluidizado

O presente trabalho descreve estudos relativos à validação e aperfeiçoamento de uma nova técnica de adsorção em flocos de materiais adsorventes pulverizados e seu uso em reator de leito expandido/fluidizado. A técnica consiste na utilização de polímeros aquo-solúveis para a floculação de suspensões aquosas de materiais adsorventes pulverizados, baseando-se no baixo custo dos mesmos e no fato de que a capacidade de adsorção dos flocos resultantes não é afetada significativamente pelo polímero floculante. O uso da técnica em reator de leito expandido/fluidizado possibilita ainda a vantagem de união dos processos de adsorção e separação sólido-líquido em uma única etapa. Os estudos foram realizados a partir da floculação de carvão ativado e zeólita natural pulverizados, separados e em mistura, para a adsorção de fenol e nitrogênio amoniacal (separados e misturados). Foi realizada uma adequada caracterização dos materiais particulados, incluindo a determinação de distribuição granulométrica, área superficial específica, potencial zeta, dentre outros. Estudos em escala de bancada foram realizados com ambos os poluentes e materiais adsorventes a fim de obter parâmetros de processo (capacidade de adsorção, cinética e concentração de floculante). Estudos em escala semipiloto com um reator de leito expandido/fluidizado de geometria cilíndrico-cônica foram realizados para estudar a adsorção dos poluentes em leito de flocos dos materiais adsorventes (separados e misturados), assim como a regeneração/reciclo do mesmo. A caracterização dos materiais apresentou propriedades semelhantes para ambos (distribuição granulométrica, potencial zeta) e outras distintas para cada um deles (massa específica, área superficial específica) A capacidade de troca catiônica da zeólita natural foi determinada em 1,02 meq NH4 +.g-1 (após homoionização com NaCl). Este material, proveniente do Chile, mostrou um significativo potencial de aplicação como adsorvente de corantes (como o azul de metileno) e, principalmente, de nitrogênio amoniacal. O floculante utilizado na geração dos flocos adsorventes, separados e misturados, foi do tipo poliacrilamida catiônica e sua concentração ótima foi de 4 e 5 mg.g-1, respectivamente. Os resultados obtidos nos estudos em escala de bancada (batelada) mostraram elevada cinética (valor médio de 0,3 min-1) e alta capacidade (valor médio de 13,4 mg NH3-N.g-1) em pH neutro (aproximadamente 6) para a adsorção de nitrogênio amoniacal em zeólita natural pulverizada e floculada. No caso da adsorção de fenol em carvão ativado pulverizado e floculado, foram obtidas uma alta cinética (valor médio de 0,8 min-1) e elevada capacidade (156 mg.g-1). Os dados cinéticos e de equilíbrio foram adequadamente descritos por um modelo cinético para reações reversíveis de primeira ordem e pelas isotermas de Langmuir e Freundlich, respectivamente. Tanto a cinética quanto a capacidade de adsorção não mostraram-se afetadas de forma significativa pelo uso do polímero floculante, sendo observada uma ausência de sinergismo na adsorção dos poluentes devido à mistura dos dois materiais adsorventes, tanto pulverizados quanto floculados. Os resultados obtidos nos estudos em escala semipiloto validaram a utilização de flocos de zeólita natural e carvão ativado pulverizados (não- misturados) em reator de leito expandido/fluidizado na adsorção de nitrogênio amoniacal (11 mg NH3-N.g-1) e fenol (132 mg.g-1), respectivamente, dentro das condições experimentais estabelecidas (taxas de aplicação de 38 e 19 m.h-1, respectivamente) A regeneração/reciclo do leito saturado de flocos mostrou-se viável para o caso da adsorção de nitrogênio amoniacal em zeólita natural, sendo insatisfatória para o leito de carvão ativado saturado em fenol. O uso de leitos mistos mostrou-se eficaz e com vantagens tais como a adsorção de múltiplos poluentes em uma única etapa e a possibilidade de aumento da taxa de aplicação no uso de materiais adsorventes menos densos (carvão ativado) misturados com materiais adsorventes de maior massa específica (zeólita natural). Uma pré-avaliação dos custos operacionais envolvidos na técnica para uso em reator de leito expandido/fluidizado foi realizada, sendo estimados entre 0,32 e 1,48 US$.m-3 (volume de solução sintética de poluente tratada até o ponto de exaustão do leito). Finalmente, são discutidas as potencialidades, vantagens/desvantagens e a viabilidade da nova técnica como processo físico-químico alternativo de adsorção em materiais adsorventes pulverizados.

Avaliação térmica e desempenho do processo de secagem de misturas de graviola e leite em secador de leito de jorro

The soursop (A. muricata) is a fruit rich in minerals especially the potassium content. The commercialization of soursop in natura and processed has increased greatly in recent years. Drying fruit pulp in order to obtain the powdered pulp has been studied, seeking alternatives to ensure the quality of dehydrated products at a low cost of production. The high concentration of sugars reducing present in fruits causes problems of agglomeration and retention during fruit pulp drying in spouted bed dryers. On the other hand in relation to drying of milk and fruit pulp with added milk in spouted bed, promising results are reported in the literature. Based on these results was studied in this work drying of the pulp soursop with added milk in spouted bed with inert particles. The tests were based on a 24 factorial design were evaluated for the effects of milk concentration (30 to 50% m/m), drying air temperature (70 to 90 °C), intermittency time (10 to 14 min), and ratio of air velocity in relation to the minimum spout (1.2 to 1.5) on the rate of production, of powder moisture, yield, rate of drying and thermal efficiency of the process. There were physical and chemical analysis of mixtures, of powders and of mixtures reconstituted by rehydration powders. Were adjusted statistical models of first order to data the rate of production, yield and thermal efficiency, that were statistically significant and predictive. An efficiency greater than 40% under the conditions of 50% milk mixture, at 70 ° C the drying air temperature and 1.5 for the ratio between the air velocity and the minimum spout has been reached. The intermittency time showed no significant effect on the analyzed variables. The final product had moisture in the range of 4.18% to 9.99% and water activity between 0.274 to 0.375. The mixtures reconstituted by rehydration powders maintained the same characteristics of natural blends.

Secagem do resíduo industrial da acerola em leito de jorro: estudos fluidodinâmicos e análise do desempenho do secador

In this research, the drying process of acerola waste was investigated by using a spouted bed drier. The process was conducted using high density polyethylene inert particles with the objective of producing an ascorbic acid-rich final product. The fruit waste was ground and used to prepare different water-maltodextrin suspensions. Initially, fluidynamical experiments were conducted in order to evaluate the feeding effect on the spouted bed drier fluidynamics behavior. The experimental planning 23 + 3 was used to investigate the effect of the following variables: solids concentration, drying air temperature, intermittence time, production efficiency, solids retention and product losses by elutriation of fine particles on drier walls. The effect of selected independent variables on the drier stability was also evaluated based on a parameter defined as the ratio between the feed suspension volume and the total inert particles volume. Finally, the powder quality was verified in experiments with fixed feed flow and varying air drying temperature, drying air velocity and intermittence time. It was observed that the suspension interferes in the spouted bed drier fluidynamics behavior, and higher air flow is necessary to stabilize the drier. The suspension also promotes the expansion of the spouted bed diameter, decreases the solid circulation and favors the air distribution at the flush area. All variables interfere in the spouted bed performance, and the solids concentration has a major effect on the material retention and losses. The intermittence time also has great effect on the stability and material retention. When it comes to production efficiency, the main effect observed was the drying air temperature. First order models were well adjusted to retention and losses data. The acerola powder presented ascorbic acid levels around 600 to 700 mg/100g. Similar moisture and ascorbic acid levels were obtained for powders obtained by spouted bed and spray drier. However, the powder production efficiency of the spray drier was lower when compared to spouted bed drier. When it comes to energetic analysis, the spray drier process was superior. The results obtained for spouted bed drier are promising and highly dependent on the operational parameters chosen, but in general, it is inferred that this drying process is adequate for paste and suspension drying

Estudo das características físico-químicas e funcionalidade de bagaços de frutas tropicais desidratados em leito de jorro

Fruits are rich sources of bioactive compounds, including phenolic compounds. Tropical fruit cultivation is an important productive segment in Brazilian Northeast. Its industrialization generates solid wastes as co-products, with potential environmental impact. Considering the recognized bioactive content of fruit and its derivatives, this research has the objective of investigating acerola (Malpighia glabra L.), cajá-umbu (Spondia ssp), jambolan (Syzygium cumini) and pitanga (Eugenia uniflora) dried wastes obtained by spouted bed drier. It was analyzed the physical-chemical composition, solubility and microphotographic aspect of these dried wastes. Besides this, it was also evaluated the bioactive content, antioxidant activity and inhibitory activity against aamylase and a-glycosidase enzymes of water and ethanol (70%, 80% e 100% v/v) extracts prepared from fruit dried wastes, as well as their possible correlations. The dried fruit wastes showed high phenolic (606.04 to 3074.6 mg GAE eq/100 g sample), anthocyanin (478.7 mg/100 g for jambolan) and ascorbic acid (2748.03 mg/100 g for acerola) contents, as well as high antioxidant DPPH activity (14.27 a 36.30 mg Trolox eq/g sample). The extracts exhibited moderate to high a-amylase inhibition (23.97% a 76.58%) and high α-glycosidase inhibition, which 99.32% peak was reached for ethanol 70% pitanga extracts. It was also observed great positive correlation between phenolic content and DPPH activity (0.97 for acerola), anthocyanin (0.95 for jambolan) and α- glycosidase inhibition (0.98 for acerola). The α-glycosidase inhibition also correlated well with the antioxidant activity for all fruit extracts. The results show that these dried fruit wastes are valuable material for further applications as functional ingredients

Avaliacao de dados de secagem de suspensoes de polpas de frutas em leito de jorro com alimentacao intermitente

The objective of this work was the development and improvement of the mathematical models based on mass and heat balances, representing the drying transient process fruit pulp in spouted bed dryer with intermittent feeding. Mass and energy balance for drying, represented by a system of differential equations, were developed in Fortran language and adapted to the condition of intermittent feeding and mass accumulation. Were used the DASSL routine (Differential Algebraic System Solver) for solving the differential equation system and used a heuristic optimization algorithm in parameter estimation, the Particle Swarm algorithm. From the experimental data food drying, the differential models were used to determine the quantity of water and the drying air temperature at the exit of a spouted bed and accumulated mass of powder in the dryer. The models were validated using the experimental data of drying whose operating conditions, air temperature, flow rate and time intermittency, varied within the limits studied. In reviewing the results predicted, it was found that these models represent the experimental data of the kinetics of production and accumulation of powder and humidity and air temperature at the outlet of the dryer

Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Concepção de um secador rotatório para secagem do cefalotórax do camarão

The present work has as objective the knowledge of the process of drying of the cephalothorax of shrimp to give support the industry to make possible the use of this byproduct. In this sense, the process conditions in this tray dryer and spouted bed were analyzed. With these results, it was projected and constructs a dryer with specific characteristics for the drying of the cephalothorax. The desorption isotherms were obtained by the dynamic method in the temperatures of 20, 35 and 50º C and in the interval of 10-90% of relative humidity. It was observed that the product in form of powder can be conserved with larger stability for lower relative humidity to 40%. The curves of drying of the dryer of fixed bed were adjusted for the models: single exponential, biparametric exponential and Page. The model biparametric exponential more adequately described all the drying conditions studied. The tests carry out in spouted bed showed high drying rate for the material in the paste form in beds active dynamicly-fluid, provely the necessity of a feeding in shorter intervals of time to increase the thermal efficiency of the process. The projected dryer, be considered the obtained results, it was a rotary dryer with inert bed, feed co-current, discharge in cyclone to take place the separation gas-solid, and feed carry out in intervals of 2 minutes. The optimization of the equipment projected it was accomplished used the complete factorial experimental design 24, this had as independent variables temperature velocity of the air, feed flow rate and encapsulated concentration (albumin), as variables answers the thermal efficiency, the moisture content of obtained powder, total time of test and the efficiency of production of powder in several points of processing. The results showed that the rotary dryer with inert bed can present, also, good results if applied industrially

Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Avaliação das condições de secagem no rendimento e na qualidade do óleo de linhaça (Linum usitatissimum L.)

De origem asiática, a semente de linhaça (Linum usitatissimum L.) pertence à família das Lináceas e é obtida a partir do linho. A semente da linhaça é ainda a maior fonte alimentar de lignanas, compostos fotoquímicos parecidos com o estrogênio, que podem desempenhar ação anticancerígena. Rica em fibras solúveis tem aproximadamente 40% do seu peso composto por óleos ricos em Ômega 3, entre os quais se destaca o α-linolênico. A secagem é a operação unitária segundo o qual ocorre eliminação da água por evaporação ou sublimação, presente em um material, mediante a aplicação de calor com condições controladas. Visando averiguar o comportamento das sementes de linhaça durante a operação de secagem, o presente trabalho teve como objetivo principal realizar o planejamento experimental e analisar estatísticamente os resultados empregados para quantificar a influência da temperatura do ar (T), tempo de secagem (t), velocidade do ar de fluidização (Uf) e carga de sólidos (Cs), sobre a razão de umidade (Xr), rendimento em óleo (Rend.) e os parâmetros oleoquimicos. A estimativa do ponto ótimo de operação foi determinada em função das variáveis de entrada aplicando o conceito de desejabilidade global. Dentre as condições estabelecidas neste trabalho, o valor ótimo da Função Desejabilidade é quando T é deslocada próximo ao nível alto (72 oC), t para o mínimo (3 h), Uf para o ponto próximo ao central (0,83 m/s) e a Cs para o nível alto (500g), obtendo-se assim: 0,126 para Xr; 36,92 % para Rend.; 4,51 mg KOH/g para IA; 22,52 meqO2/Kg IP e 0,31% para DC. Foram obtidas as isotermas de dessorção das sementes de linhaça nas temperaturas de 40, 60 e 80°C. Os dados experimentais foram avaliados usando seis modelos matemáticos. A entalpia e a entropia diferencial de dessorção foram estimadas por meio das relações de Clausius-Clapeyron e Gibbs-Helmholtz, respectivamente. Os modelos de GAB e Peleg ajustaram adequadamente os dados experimentais. A teoria da compensação entalpia-entropia foi aplicada com sucesso às isotermas de dessorção e indica que o mecanismo de dessorção de umidade das sementes de linhaça pode ser considerado como controlado pela entalpia. A secagem das sementes de linhaça previamente umidificadas foram avaliadas em um secador de leito fixo e fluidizado, as corridas experimentais foram realizadas nas temperaturas de 40, 60 e 80°C, dentre dos cinco modelos propostos, o modelo de Midilli et al, foi o melhor modelo que melhor ajustou aos dados experimentais. Foi observado que a difusividade efetiva para as sementes de linhaça aumentou com a elevação da temperatura do ar de secagem para a secagem em leito fixo e fluidizado. A dependência da difusividade em relação à temperatura foi descrita pela equação de Arrhenius, por meio da qual se estimou para ambos os processos de secagem.

Modelagem dos processos envolvidos nos sistemas de secagem e armazenamento de grãos

A produção de soja é uma das principais atividades econômicas na Região Noroeste do Estado do Rio Grande do Sul. As perdas de produto em condições de comercialização ocasionadas nas atividades de secagem e armazenamento são significativas, justificando a pesquisa e aprimoramento destes processos. Nesta tese foram pesquisados dois problemas: 1. Modelamento matemático dos processos de secagem, utilizando parâmetros conhecidos de soja e 2. Modelamento matemático do problema de aeração para o cálculo da distribuição da pressão e da velocidade do ar na massa de grãos em unidades de armazenamento de soja. No problema de secagem foi desenvolvido um sistema composto de quatro equações diferenciais parciais hiperbólicas acopladas não-lineares, que descreve o comportamento da temperatura e do teor de umidade do ar e dos grãos em função do tempo. Para resolver o sistema foram utilizados os métodos das diferenças finitas (p. ex., métodos de MacCormack e Crank- Nicolson.) e o método dos volumes finitos. A análise dos resultados permitiu recomendar o método mais adequado para cada tipo do problema. Para determinação da intensidade do fluxo de massa e de calor foram utilizados os dados experimentais de camada fina obtidos da literatura e complementados com dados experimentais desta tese. Foi desenvolvido um equipamento para obtenção das curvas de secagem de grãos em secador de leito fixo, a fim de identificar o modelo para secagem em camada espessa. A comparação entre os resultados experimentais e das simulações numéricas mostrou que o modelo descreve razoavelmente a dinâmica de secagem No problema de aeração foi desenvolvido um modelo matemático que descreve o escoamento do ar em sistemas de armazenamento de grãos, baseado em relações experimentais entre velocidade e gradiente de pressão. Para resolver o problema de aeração foi utilizado o método dos elementos finitos e desenvolvido um programa computacional. Um teste realizado com o programa mostrou que os resultados da solução numérica convergem para uma solução analítica conhecida. As simulações realizadas mostraram que o programa computacional pode ser usado como instrumento auxiliar para o projeto de silos, possibilitando o cálculo e a visualização gráfica da distribuição das pressões e das linhas de corrente em diferentes seções do armazém.

Viabilidade técnica de uma rota não convencional para a produção de leite de cabra em pó em cooperativas do Rio Grande do Norte

Nowadays, Brazil has both the greatest goat herd and the greatest goat milk production of South America. The state of Rio Grande do Norte, located in northeast of Brazil, has an average year production of three thousand cubic meters of goat milk in natura. Part of this milk production is homemade and it comes from small farms, which unite in rural cooperatives created to encourage the production and implementation of industrial processes for preservation and processing of milk. Results presented by literature and obtained from preliminary essays in this thesis show that non conventional dryer of spouted bed with inert particles is able to produce powder milk from in natura milk (cattle or goat), with the same quality of spray dryer, however, operating at low cost. The method of drying in spouted bed consists of injecting milk emulsion on the bed of inert particles gushed by hot air. This emulsion covers the particles with a thin film, which dries and is reduced to powder during the circulation of inerts inside the bed. The powder is dragged by exhaustion air and separated in the cyclone. The friction among particles resulted from the particles circulation, encourages high taxes of shear in the thin film of emulsion, breaking the cohesive forces and making this process possible. Studying the drying process and the powder goat milk production in one unit of spouted bed with inert particles, seeing the development of a low cost technological route for powder milk production is the aim of this thesis. The powder milk produced by this route must attend the local demand of food industries which need an intermediate product to be used as a food ingredient (ice-cream, milk candy). In order to reach this aim, this thesis approaches the aspects related to physical, thermodynamics and physic-chemicals characteristics of goat milk, whose complete data are still inexistent in the literature. The properties of materials are of great importance to the project of any process which involves the operations of transportation of movement, heat and mass quantity, such as the dryers which operate in fluid dynamically active regime, like the spouted bed. It was obtained new data related to the goat milk properties in function of concentration of solids and temperature. It is also important to mention the study developed about the kinetic of solids retention in the bed of inert particles during the drying of goat milk. It was found more adequate processes conditions to the proposed technological route to be implemented in small and micro-industries, with simplifications in the system of milk injection as well as in the form of operation of the dryer. Important data were obtained for a posterior stage of this research which involves the v modeling, simulation, control and optimization of the process. The results obtained in this thesis, in relation to process performance as well as to the quality of produced powder milk validate the proposal of using the spouted bed dryer in the production of powder goat milk

Aplicações de secagem para o aproveitamento de resíduos da banana, visando sua aplicação na indústria

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da secagem do café cereja despolpado em diferentes tempos de fermentação

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE