Visualização e caracterização de campos ultra-sônicos via óptica de schlieren

Neste trabalho aplicamos um método óptico sensível e de baixo custo denominado ‘Schlieren’ para visualização e caracterização de feixes ultra-sônicos em solução aquosa. Esta caracterização assume papel importante na Medicina para diagnóstico não invasivo via método ultra-sônico.

Simultaneous recording of shadowgrams and schlieren images for the study of plasma assisted aerodynamics

This work describes an optical device for the simultaneous recording of shadowgrams and schlieren images, and some results are presented concerning its applications to the study of plasma assisted flow control in airfoil models. This approach offers many advantages in comparison to other methods, specially because the use of tracer particles (like smoke in wind tunnels) is not required for the experiments, thus avoiding contaminations in the electric discharges or air flows. Besides, while schlieren images reveal the refractive index gradients in the area of study, shadowgrams detect the second order spatial derivatives of the refractive indexes. Therefore, the simultaneous recording of these different images may give interesting information about the phenomena under study. In this paper, these images were used to confirm the existence of vortex structures in the flow induced by corona discharges on airfoil models. These structures are a possible explanation for the effects of drag reduction and lift force increasing, which have been reported in experiments of plasma assisted Aerodynamics.

Simultaneous Recording of Shadowgrams and Schlieren Images for the Study of Plasma Assisted Aerodynamics

This work describes an optical device for the simultaneous recording of shadowgrams and schlieren images, and some results are presented concerning its application to the study of plasma assisted flow control in airfoil models. This approach offers many advantages in comparison to other methods, specially because the use of tracer particles (like smoke in wind tunnels) is not required for the experiments, thus avoiding contaminations in the electric discharges or air flows. Besides, while schlieren images reveal the refractive index gradients in the area of study, shadowgrams detect the second order spatial derivatives of the refractive indexes. Therefore, the simultaneous recording of these different images may give interesting information about the phenomena under study.

Visualização e caracterização de campos ultra-sônicos via óptica de schlieren

Neste trabalho aplicamos um método óptico sensível e de baixo custo denominado Schlieren para visualização e caracterização de feixes ultra-sônicos em solução aquosa. Esta caracterização assume papel importante na Medicina para diagnóstico não invasivo via método ultra-sônico.

A critical evaluation of a long pathlength cell for flow-based spectrophotometric measurements

Coupling of a flow cell based on a liquid core waveguide (LCW) to flow systems for spectro photometric measurements was critically evaluated. Flow-based systems with and without chemical reactions were exploited to estimate the increase in analytical signal in comparison to those obtained with a conventional I cm cell under different experimental conditions. The Schlieren effect associated to intense concentration gradients in the sample zone was investigated with model solutions that do not absorb visible electromagnetic radiation. The effect of radiation scattering was lower than the expected by considering the increase in the optical path, being the magnitude of the perturbation up to 40% higher for the 100-cm LCW cell. Several alternatives for compensation of the Schlieren effect were experimentally investigated. The potentiality of the LCW for turbidimetric measurements and coupling to monosegmented flow analysis was also evaluated. (C) 2008 Elsevier B.V. All rights reserved.

The Paleozoic magmatic history of the Maggia and Sambuco nappes, Lower Penninic, Central Lepontine Alps

Résumé : Les corps magmatiques sont des indicateurs essentiels dans toute reconstitution paléogéographique et/ou géodynamique d'un cycle orogénique, en particulier en contexte polycyclique, où la plupart des autres indices ont été oblitérés. Ils sont aisément datables et leurs caractéristiques géochimiques permettent de contraindre leur contexte tectonique de mise en place. Cette approche a été appliquée aux socles pré-mésozoïques des nappes penniques inférieures de Sambuco et de la Maggia, dans les Alpes centrales lepontines. Plusieurs événements magmatiques ont été identifiés dans le socle de Sambuco et datés par la méthode U-Pb sur zircon couplée à la technique LA-ICPMS. La suite calco-alcaline mafique rubanée de Scheggia est datée du Cambrien inférieur à 540-530 Ma ; le métagranite alumineux oeillé de Sasso Nero a un âge de 480-470 Ma, tout comme bien d'autres «older orthogneisses» des socles alpins. Il contient des zircons hérités d'âge panafricain à 630-610 Ma, indicateur d'une affiliation gondwanienne de ces terrains. Le pluton calco-alcalin du Matorello est daté à environ 300-310 Ma, et les filons lamprophyriques qu'il abrite à 300 Ma. La granodiorite de Cocco et le leucogranite de Ruscada, tous deux intrudés dans le socle de la nappe adjacente de la Maggia, ont des âges similaires à celui du Matorello. Ceci ajouté aux similitudes magmatiques observées entre Cocco et Matorello suggère une proximité paléogéographique des deux nappes au Permien-Carbonifère. Or ces dernières sont actuellement considérées appartenir à deux domaines paléogéographiques mésozoïques distincts : helvétique pour Sambuco et briançonnais pour Maggia, séparés par un bassin océanique. Si tel fut le cas, aucun mouvement décrochant ne doit avoir décalé les marges continentales de l'océan, retrouvées en parfaite coïncidence lors de sa fermeture. Le Matorello est un pluton recristallisé en faciès amphibolite et plissé par cinq phases successives de déformation non-coaxiales, qui ont conduit à son renversement complet, attesté par des indicateurs de paléogravité. Il préserve de spectaculaires phénomènes de coexistence liquide de magmas (essaims d'enclaves et Bills composites). Ce pluton était originellement tabulaire, construit par l'accumulation de multiples injections de magma en feuillets d'épaisseur métrique à décamétrique. Suivant le rythme de mise en place, les injections successives ont rapidement cristallisé avec des contours nets et bien définis (Bills composites) ou se sont mélangées avec les précédentes pour former une couche non consolidée de plusieurs dizaines de mètres d'épaisseur (granodiorite principale). Les injections individuelles sont délimitées par de subtils contrastes en granulométrie, proportions modales ou ségrégation de minéraux (schlieren), ou par des phénomènes d'érosion le long des surfaces de contact. Deux couches métriques à contour sinueux consistent en une accumulation compacte d'enclaves mafiques arrondies dans une matrice granodioritique fine. Le granoclassement des enclaves, la présence de figures de charge et de phénomènes érosifs en base de couche, ainsi que des schlieren de biotite entrecroisés évoquent l'injection de coulées de magma chargé d'enclaves et de faible viscosité en régime hydrodynamique turbulent dans un encaissant granodioritique encore largement liquide. La nature hybride des roches implique une chambre magmatique sous-jacente, en cours de différenciation et périodiquement réalimentée. Les magmas sont des liquides mafiques dérivés du manteau et des liquides anatectiques d'origine crustale, comme l'indique la gamme mesurée des rapports isotopiques initiaux du Sr (0.704 à 0.709) et des valeurs epsilon Nd (-2.1 à -4.7). Ces données montrent également que la contribution crustale est dominante, en accord avec les isotopes du plomb. Les phénomènes d'hybridation ont vraisemblablement eu lieu en base de croûte et dans la chambre magmatique sous-jacente au laccolite du Matorello. Les indicateurs de paléogravité du Matorello contribuent accessoirement à la compréhension de l'architecture actuelle de la nappe de Sambuco. Des plis isoclinaux à surface axiale verticale peuvent être mis en évidence par le contact entre les faciès dioritique et granodioritique. L'antiforme dont le Matorello forme le coeur est un synclinal, ce qui le positionne dans le Flanc inverse du grand pli couché que forme la nappe de Sambuco. Par ailleurs, des blocs de gneiss retrouvés dans le wildflysch sommital de la couverture de la nappe d'Antigorio ont été affiliés dans cette étude au pluton du Matorello. Ceci implique que le front de la nappe de Sambuco chevauchait déjà la partie est du bassin d'Antigorio au moment de sa fermeture. Par conséquent, ce n'est qu'en position externe que la nappe du Lebendun chevauche directement la nappe d'Antigorio. Abstract Magmatic bodies are important markers in paleo-geographic or geodynamic reconstructions of orogenic cycles, even more so in the case of polycyclic events where many of the other markers have been overwritten or destroyed. Plutons are relatively easy to date and their geochemical properties help constrain the tectonic context in which they were emplaced. This study focuses on the pre-mesozoic basement in the Sambuco and Maggia lower Penninic nappes located in the central Lepontine domain of the Alps. A number of magmatic events have been identified in the Sambuco basement. These events were dated using LA-ICPMS U/Pb on zircon grains. The mafic calc-alkaline banded Scheggia suite is dated as lower Cambrian, 540-530 Ma. The Al-rich Sasso-Nero lenticular gneiss is 480-470 Ma old (similarly to many older orfhogneisses of the Alpine basement) and contains 630-610 Ma old pan-African inherited zircons that illustrate the Gondwanian origin of these terranes.The calc-alkaline Matorello pluton is dated as 310-300 Ma whereas the lamprophyric bodies it contains are of 300 Ma. The Cocco granodiorite and the Ruscada leucogranite both intrude the basement of the adjacent Maggia nappe and are of similar ages to the Matorello. The ages as well as the geochemical similarities between the Cocco, Rucada and Matorello plutons suggest their paleo-geographic proximity at the Permian-Carboniferous boundary. However, these nappes are currently considered as belonging to two different Mesozoic paleo-geographic domains. Indeed, the Sambuco is considered as Helvetic whereas the Maggia is said to be Briançonnais, both separated by an oceanic basin. If this is the case, then it is essential that nostrike-slip movement has misaligned both continental margins since these coincide perfectly now that the oceanic domain closed. The Matorello pluton was originally a tabular intrusion, built up by the accumulation of multiple, several meter-thick, subhorizontal sheet-like injections of magma. Depending on their emplacement rate, the successive magma injections either solidified rapidly with sharp and rather well-defined boundaries (like the composite sills) or mingled with previous injections generating a thick molten layer up to several tens to hundred meters thick, like in the main granodioritic facies. These coalesced injections are hardly distinguishable, however subtle contrasts in granulometry, mineral modal proportions or mineral sorting (cross-bedded biotite-rich schlieren), as well as erosional features and/or crystal entrapment along contact surfaces allow to distinguish between the different injections. Two exceptional meter-thick layers display sinuous boundaries with the host granodiorite and consist of a densely packed accumulation of mafic enclaves in a granodioritic matrix. Gravitational sorting of the enclaves with load cast features at the base of the layers and sinuous biotite schlieren point to injection of low viscosity turbulent composite magma flows in the still largely molten granodiorite host. The hybrid nature of these rocks implies the existence of á periodically replenished and differentiated underlying magma chamber. Magmas are mafic liquids derived from the mantle and anatectic liquids of crustal origin, as shown by the (87Sr/86Sr), and epsilon Nd values (0.704-0.709 and -2.1 to -4.7 respectively. These data show that the crustal contribution is important, as confirmed by the Pb isotopes. The hybridisation processes seem to have occurred in the lower crust in magma chambers underlying the Matorello laccolith. The paleo-gravity markers in the Matorello help understand the architecture of the Sambuco nappe. Isoclinal folds with a vertical axial plane can be seen at the contact between dioritic and granodioritic facies. The antiform structure of which the Matorello is the heart is in fact a syncline. This places it in the inverse flanc of the large recumbent fold that constitutes the Sambuco nappe. The gneiss blocs found in the summital wildflysh cover of the Antigorio nappe have been linked to the Matorello pluton. This means that the front of the Sambuco nappe already overlapped the Antigorio basin when it closed. This implies that the Lebendun nappe can only overlap the Antigorio nappe in it's external position. Résumé grand public La chaîne alpine est la conséquence de la collision tertiaire entre deux masses continentales, l'Europe au nord et la péninsule apulienne africaine au sud, originellement séparées par l'océan mésozoïque téthysien. Cette collision a fermé un espace large de plusieurs centaines de km avec pour résultat l'écaillage de la croûte terrestre en unités tectoniques de dimensions variables, qui se sont empilées, imbriquées, éventuellement replissées en nappes de géométrie complexe. Cet amoncellement de 40 km d'épaisseur a vu sa température et sa pression lithostatique internes augmenter jusqu'à des valeurs de l'ordre de 680 °C et 6000 bars, induisant une recristallisation métamorphique des roches. L'un des objectifs de la géologie alpine est de reconstituer la géographie de la région aux temps mésozoïques de l'océan téthysien, en d'autres termes, de replacer chacune des unités tectoniques identifiées au sein de l'empilement alpin dans sa position originelle. Le défi est de taille et peut être comparé à celui de la reconstitution d'un vaste puzzle, dont certaines pièces seraient endommagées au niveau de leur contour ou leurs couleurs (métamorphisme), dissimulées par d'autres (enfouissement), voire tombées de la table de jeu (subduction, échappement latéral). Plusieurs approches ont été mises en oeuvre au cours du siècle écoulé. On citera en particulier la stratigraphie, la tectonique et le paléomagnétisme. Dans ce travail, nous avons essentiellement utilisé des techniques de datation isotopique absolue des roches (U/Pb sur zircon) qui, sur la base des connaissances acquises par l'ensemble des autres disciplines géologiques, nous ont permis de mieux contraindre ta paléogéographie mésozoïque du domaine «pennique inférieur » des Alpes centrales lépontines. Et au-delà? Nous savons tous que la disposition des continents à la surface de la Terre évolue constamment. Il est donc tentant d'essayer de remonter plus loin encore dans le temps et de reconstituer la physionomie de la marge sud européenne, tout au moins certains éléments de son histoire, au cours de l'ère paléozoïque. Les traces de ces événements très anciens sont naturellement ténues et dans ce contexte, les techniques de datation mentionnées ci-dessus deviennent les outils les plus performants. Ainsi, des datations u/Pb sur zircon nous ont permis de recenser plusieurs intrusions magmatiques, attribuées à quatre événements orogéniques anté-alpins. Des âges néoprotérozoïques (630-610 millions d'années ou Ma), cambrien inférieur (540-530 Ma), ordovicien inférieur (480-470 Ma) et carbonifère supérieur-permien inférieur (310-285 Ma) ont été obtenus dans le socle de la nappe de Sambuco. Des âges similaires à 300 Ma ont été obtenus dans la nappe voisine de la Maggia, qui permettent de relier ces deux unités. Aujourd'hui côte à côte, ces deux nappes devaient également se trouver proches l'une de l'autre il y a 300 Ma, lors de l'extension post-varisque. Les structures magmatiques spectaculaires préservées dans le pluton du Matorello (300 Ma) contraignent la géométrie actuelle de la nappe de Sambuco dans laquelle l'intrusion s'est mise en place. La forme originelle du pluton, aujourd'hui retourné et replissé plusieurs fois, s'avère être tabulaire, faite d'intrusions de faible épaisseur (1-300 m) s'étalant en forme de disque (30m à 2 km de diamètre). Les injections successives de magma se sont accumulées sous un toit dioritique précoce; elles sont issues, par le refais de fractures, d'une chambre magmatique plus profonde, périodiquement réalimentée par des magmas calco-alcalins d'origine mantellique contaminés parla croûte continentale profonde (εNd = -2.1 à -4.7). Des accumulations d'enclaves magmatiques arrondies et granoclassées dans des paléo-chenaux à fond érosif témoignent de conditions de mise en place hydrodynamiques à haute énergie. Ces enclaves sont emmenées de la chambre magmatique sous-jacente à la faveur d'épisodes de fracturation hydraulique liés à l'injection de magmas matelliques chauds dans des liquides différenciés riches en eau. Cette hypothèse est étayée par l'existence de filons composites. Une paléohorizontale a pu être déduite au sein du pluton, indiquant que cette partie de la nappe de Sambuco est verticalisée et isoclinalement replissée par la déformation alpine. Finalement, des blocs érodés du socle Sambuco ont été retrouvés dans le wildflysch sommital de la couverture sédimentaire mésozoïque de la nappe d'Antigorio sous-jacente. Ceci suggère que les blocs ont été fournis parle front de la nappe de Sambuco en train de chevaucher sur la nappe d'Antigorio au moment de la fermeture du bassin sédimentaire de cette dernière.

Los nummulítidos (Nummulites y Assilina) del Paleoceno Superior-Eoceno Inferior de la cuenca pirenaica: Sistemaáica.

Se ha realizado el estudio sistemático de los nummulítidos pertenecientes a los géneros Nummulites y Assilina del intervalo Paleoceno Superior - Eoceno Inferior de la Cuenca Pirenaica, a partir de muestras procedentes principalmente del sector meridional de la cuenca. Los taxones descritos se han comparado con especímenes procedentes de otras cuencas de la Mesogea: Alpes suizos (Schlieren- y Gumigelflysch) y austríacos (unidades alóctonas helvéticas), norte de Italia (Verona y Vicenza), plataformas marinas adriáticas (Eslovenia y Croacia), península de Crimea (Ucrania), Cuenca de Haymana (Anatolia central, Turquía), y Salt Range (Pakistán). Se han descrito 98 taxones de nummuiítidos -entre especies y subespecies-, de los cuales: - 66 taxones del género Nummulites, pertenecientes a los grupos de N. perforatus, N. partschi, N. rotularius, N. minewensis, N. globulus, N. laevigatus, N. distans, N. heberti y N. spirectypus. - 32 taxones del género Assilina, pertenecientes a los gmpos de A. spira, A. exponens, A. subgranulosa, A. ammonea, A. canalijera y A. alpina. En este trabajo -y siguiendo las consideraciones de Loeblich y Tappan (1987)- Assilina integra las denominaciones gen6ricas tradicionales de Assilina y Operculina.

Turbiinin testilaitteen alustava suunnittelu

Tässä työssä esitellään aluksi aksiaaliturbiinia ja sen ominaisuuksia. Turbiinista kerrotaan yleisesti sen käyttökohteista, rakenteesta ja eri toteutustavoista. Ominaisuuksissa on keskitytty aksiaaliturbiinin häviöihin ja hyötysuhteen laskentaan. Työssä kerrotaan myös lineaarikaskadeista, kuvaillaan niiden rakennetta ja käyttökohteita ja esitellään muutamia eri yliopistojen kaskadeja. Kaskadien yhteydessä esitellään myös Schlierenin kuvausmenetelmä. Työn lopussa suunnitellaan alustavasti Lappeenrannan yliopistolle tuleva lineaarikaskadi. Suunnittelussa lähtökohtana ovat annetut lähtöarvot ja muiden yliopistojen kaskadit. Suunnittelussa mitoitetaan kaskadin kanavan koko, siihen tuleva siivekemalli ja mittalaitteiden paikat.

Avaliação dos granitos Giallo São Francisco Real, Branco Dallas e Branco Marfim, do muncípio de Barra de São Francisco/ES para aplicação como rocha ornamental e de revestimento

Pós-graduação em Geologia Regional - IGCE

Diagnostic techniques for EHD and MHD interaction

The impact of plasma technologies is growing both in the academic and in the industrial fields. Nowadays, a great interest is focused in plasma applications in aeronautics and astronautics domains. Plasma actuators based on the Magneto-Hydro-Dynamic (MHD) and Electro- Hydro-Dynamic (EHD) interactions are potentially able to suitably modify the fluid-dynamics characteristics around a flying body without utilizing moving parts. This could lead to the control of an aircraft with negligible response time, more reliability and improvements of the performance. In order to study the aforementioned interactions, a series of experiments and a wide number of diagnostic techniques have been utilized. The EHD interaction, realized by means of a Dielectric Barrier Discharge (DBD) actuator, and its impact on the boundary layer have been evaluated by means of two different experiments. In the first one a three phase multi-electrode flat panel actuator is used. Different external flow velocities (from 1 to 20m/s) and different values of the supplied voltage and frequency have been considered. Moreover a change of the phase sequence has been done to verify the influence of the electric field existing between successive phases. Measurements of the induced speed had shown the effect of the supply voltage and the frequency, and the phase order in the momentum transfer phenomenon. Gains in velocity, inside the boundary layer, of about 5m/s have been obtained. Spectroscopic measurements allowed to determine the rotational and the vibrational temperature of the plasma which lie in the range of 320 ÷ 440°K and of 3000 ÷ 3900°K respectively. A deviation from thermodynamic equilibrium had been found. The second EHD experiment is realized on a single electrode pair DBD actuator driven by nano-pulses superimposed to a DC or an AC bias. This new supply system separates the plasma formation mechanism from the acceleration action on the fluid, leading to an higher degree of the control of the process. Both the voltage and the frequency of the nano-pulses and the amplitude and the waveform of the bias have been varied during the experiment. Plasma jets and vortex behavior had been observed by means of fast Schlieren imaging. This allowed a deeper understanding of the EHD interaction process. A velocity increase in the boundary layer of about 2m/s had been measured. Thrust measurements have been performed by means of a scales and compared with experimental data reported in the literature. For similar voltage amplitudes thrust larger than those of the literature, had been observed. Surface charge measurements led to realize a modified DBD actuator able to obtain similar performances when compared with that of other experiments. However in this case a DC bias replacing the AC bias had been used. MHD interaction experiments had been carried out in a hypersonic wind tunnel in argon with a flow of Mach 6. Before the MHD experiments a thermal, fluid-dynamic and plasma characterization of the hypersonic argon plasma flow have been done. The electron temperature and the electron number density had been determined by means of emission spectroscopy and microwave absorption measurements. A deviation from thermodynamic equilibrium had been observed. The electron number density showed to be frozen at the stagnation region condition in the expansion through the nozzle. MHD experiments have been performed using two axial symmetric test bodies. Similar magnetic configurations were used. Permanent magnets inserted into the test body allowed to generate inside the plasma azimuthal currents around the conical shape of the body. These Faraday currents are responsible of the MHD body force which acts against the flow. The MHD interaction process has been observed by means of fast imaging, pressure and electrical measurements. Images showed bright rings due to the Faraday currents heating and exciting the plasma particles. Pressure measurements showed increases of the pressure in the regions where the MHD interaction is large. The pressure is 10 to 15% larger than when the MHD interaction process is silent. Finally by means of electrostatic probes mounted flush on the test body lateral surface Hall fields of about 500V/m had been measured. These results have been used for the validation of a numerical MHD code.

Numerical analysis of Dielectric Barrier Discharge

A numerical investigation of dielectric barrier discharge aimed to simulate the electro hydro dynamic interaction is presented. A discharge drift diffusive model according to the Townsend avalanche is described and used to duplicate the plasma kinetics of a DBD actuator. The discharge characteristics dependence upon dielectric material and applied voltage are simulated and the EHD force field according to a simplified approach is presented and discussed. The coupling of DBD results with a fluid dynamic code is also shown. Finally, a new non invasive diagnostic technique for EHD interaction based on Schlieren imaging is computationally validated.

Petrogenesis of dunite, wehrlite and websterite xenoliths from Kimberley, South Africa: Origin as mantle peridotites of cumulates

Dunite, wehrlite and websterite xenoliths occur amongst a large abundance of mantle xenoliths in kimberlites of the Kimberley cluster in South Africa. Up to know they have mostly been neglected. On the basis of texture, major and trace elements, oxygen isotopes as well as Re-Os isotope characteristics, they can be subdivided into two groups. A coarse-grained mantle peridotite group, comprising dunite, wehrlite and websterite xenoliths, that are similar to fertile peridotites and represent upper mantle assemblages that are differently influenced by mantle metasomatism. And a cumulate group, containing fine-grained Fe-rich dunite xenoliths that represent cumulates of flood basalt magmatism related to ~183 Ma Karoo and ~2.7 Ga Ventersdorp events in southern Africa. Dunite, wehrlite and websterite xenoliths have preserved a complex history of melt depletion and metasomatic re-enrichment events, which gives information about the different re-enrichment stages of the subcratonic lithospheric mantle and the spatial differences within the Kaapvaal craton upper mantle. Websterite xenoliths comprise orthopyroxene (40-85 Vol. %), clinopyroxene (5-42 Vol. %), garnet (4-10 Vol. %) and subordinately olivine, while dunite and wehrlite xenoliths contain predominantly olivine (65-100 Vol %) and subordinately orthopyroxene, clinopyroxene and garnet. High melt depletion and a dunitic to harzburgitic protolith composition are reflected by high forsterite (Fo90-92) and high olivine NiO contents (2800-5000 ppm) and high orthopyroxene Mg# (Mg/(Mg+Fe)) of 0.91-0.93. Re-depletion ages of predominantly 2.9 Ga reflect a minimum age of melt depletion. Melt depletion ceased in conjunction with collision of the Kimberley block with the Witwatersrand block ~2.9 Ga ago. Subduction related re-fertilisation of the previously depleted mantle xenoliths is documented by i) amoeboid textured orthopyroxene, clinopyroxene and garnet, which crystallized in schlieren along olivine grain boundaries, ii) high whole-rock SiO2, Al2O3, CaO, TiO2, FeO contents, iii) low oxygen isotope ratios in clinopyroxene and garnet of 4.8-5.4 ‰ and 4.7-5.3 ‰, respectively and iv) trace element compositions of wehrlitic clinopyroxene and garnet in equilibrium with high-pressure partial melts of eclogite. Trace element disequilibrium of orthopyroxene with clinopyroxene and garnet indicates a separate origin for orthopyroxene, on one side as primary mantle orthopyroxene in dunite and wehrlite xenoliths and on the other side as reaction product with Si-rich melts produced by partial melting of eclogite. This reaction triggered replacement of olivine by orthopyroxene in the surrounding mantle and produced the typical Si-rich composition of Kaapvaal mantle peridotites. Partial melting of eclogite at higher temperatures produced a second metasomatic melt with lower SiO2, but higher Al2O3, CaO, FeO, Ti, Zr, Hf and a low oxygen isotope ratio. This melt triggered clinopyroxene and locally garnet and rutile crystallization in percolation veins, replacing olivine and orthopyroxene in the Kaapvaal upper mantle. Additionally, websterite xenoliths have experienced late stage cryptic metasomatism by the host kimberlite melt, changing the trace element composition of clinopyroxene, orthopyroxene and garnet to different extent. Hence websterite and most fertile lherzolite xenoliths have experienced three metasomatic events: i) reaction with high-Si melt, ii) percolation of subduction related silica melt with lower SiO2 content and iii) cryptic metasomatism by kimberlite. In contrast, dunite and wehrlite xenoliths have only experienced the second metasomatic event. They represent mantle lithologies further away from metasomatising agents. The Fe-rich dunites comprise olivine neoblasts with subordinate olivine porphyroclasts and parallel-orientated needles of ilmenite, which may enclose spinel. The lower forsterite and NiO contents of olivine in Fe-rich dunites compared to mantle peridotite xenoliths (Fo87-89 vs. Fo93-95 and 1300-2800ppm vs. 2200-3900 ppm, respectively), rules out a restitic origin. Cr-rich spinels are remnants of the original cumulate mineralogy that survived a late stage metasomatic overprint related to the production of the host kimberlite, producing ilmenite and phlogopite in some samples. Olivine porphyroclasts and neoblasts have different trace element compositions, the latter having high Ti, V, Cr and Ni and low Zn, Zr and Nb contents, indicating contrasting origins for neoblasts and porphyroclasts. The dunites have high 187Os/188Os ratios (0.11-0.15) indicating young (Phanerozoic) model ages for most samples, whereas three samples show isotopic mixtures between Phanerozoic neoblasts and ancient porphyroclastic material. Most Fe-rich dunite xenoliths can be interpreted as cumulates of fractional crystallization of Karoo magmatism, whereas the porphyroclasts are interpreted to be remnants from the much earlier Archaean Ventersdorp magmatism.

Biomedical and industrial applications of atmospheric pressure non-equilibrium plasmas

This dissertation will be focused on the characterization of an atmospheric pressure plasma jet source with an application oriented diagnostic approach and the description of processes supported by this plasma source. The plasma source investigated is a single electrode plasma jet. Schlieren images, optical emission spectra, temperature and heat flux profiles are analyzed to deeply investigate the fluid dynamic, the chemical composition and the thermal output of the plasma generated with a nanosecond-pulsed high voltage generator. The maximum temperature measured is about 45 °C and values close to the room temperature are reached 10 mm down the source outlet, ensuring the possibility to use the plasma jet for the treatment of thermosensitive materials, such as, for example, biological substrate or polymers. Electrospinning of polymeric solution allows the production of nanofibrous non-woven mats and the plasma pre-treatment of the solutions leads to the realization of defect free nanofibers. The use of the plasma jet allows the electrospinnability of a non-spinnable poly(L-lactic acid) (PLLA) solution, suitable for the production of biological scaffold for the wound dressing.

Modelling, diagnostics and experimental analysis of plasma assisted processes for material treatment

This work presents results from experimental investigations of several different atmospheric pressure plasmas applications, such as Metal Inert Gas (MIG) welding and Plasma Arc Cutting (PAC) and Welding (PAW) sources, as well as Inductively Coupled Plasma (ICP) torches. The main diagnostic tool that has been used is High Speed Imaging (HSI), often assisted by Schlieren imaging to analyse non-visible phenomena. Furthermore, starting from thermo-fluid-dynamic models developed by the University of Bologna group, such plasma processes have been studied also with new advanced models, focusing for instance on the interaction between a melting metal wire and a plasma, or considering non-equilibrium phenomena for diagnostics of plasma arcs. Additionally, the experimental diagnostic tools that have been developed for industrial thermal plasmas have been used also for the characterization of innovative low temperature atmospheric pressure non equilibrium plasmas, such as dielectric barrier discharges (DBD) and Plasma Jets. These sources are controlled by few kV voltage pulses with pulse rise time of few nanoseconds to avoid the formation of a plasma arc, with interesting applications in surface functionalization of thermosensitive materials. In order to investigate also bio-medical applications of thermal plasma, a self-developed quenching device has been connected to an ICP torch. Such device has allowed inactivation of several kinds of bacteria spread on petri dishes, by keeping the substrate temperature lower than 40 degrees, which is a strict requirement in order to allow the treatment of living tissues.