Instrumentation for measuring pavement-vehicle interaction. Volume IV: specification sheets, lists of drawings, and sensor wiring schematics. Final report.

Federal Highway Administration, Structures and Applied Mechanics Division, Washington, D.C.

Tackling trafficking in human beings in a security integrated Europe: addressing the challenges using trafficking schematics

This paper aims to conceptualise trafficking in human beings (THB) as an organised crime by drawing on the rational choice theory. Utilising crime scripting principles, it proposes trafficking schematics to capture and visualise THB in its entirety. Stemming from its transnational nature and varying conceptualisations, combatting THB faces challenges, such as the lack of harmonisation of policy instruments and differing stakeholder agendas. To mitigate these challenges, this paper proposes trafficking schematics. Their core lies in the modelling of THB constituent elements, including stages and their sequence, key actors and relationships, and financial modus operandi. Trafficking schematics may therefore contribute to addressing THB in a holistic, dynamic and integrated way, by enriching stakeholders’ understanding of the phenomenon and facilitating collaboration to address it. The paper contributes to theory and practice by drawing up a model of the procedural, human, logistical and environmental elements of THB that may be viewed as an instrument of public value creation.

IRRIGATION OF UROPIGIAN GLAND OF DOMESTIC FOWLS (Gallus gallus domesticus) OF COBB LINEAGE

In this study was evaluated the vascular system of uropigian gland in 34 fowls (Gallus gallus domesticus), of Cobb lineage. The material was donated by the firm Globo Aves, located in Uberlandia - MG. Was specially studied the origin of collaterals that are aimed to that gland. Animals had them arterial contingents injected with a colored solution of neoprene latex, by polyethylene canulas through the right isquiatic artery. Then was injected an aqueous solution of formol 10%, in subcutaneous and intracavity spaces, which made possible the material fixation. Finally was proceeded the individually dissection of circumscribed region of uropigian gland. Opportunely was used a monocular lens in observation of vascular profile and was prepared schematics models representing the irrigation of each fowl. Uropigian gland showed itself as irrigated by mediana caudal artery in all (100%) animals, through its intersegmentaries branches, which emit right and left lateral glandular branchs and, right and left medials. Was counted the sub-branches, and was verified bigger emission in the right by the M. D. 1,1 and 1,2; and in the left by the M. E. 1,1 and 1,2.

Low-cost MR-compatible moving heart phantom.

For the development and evaluation of cardiac magnetic resonance (MR) imaging sequences and methodologies, the availability of a periodically moving phantom to model respiratory and cardiac motion would be of substantial benefit. Given the specific physical boundary conditions in an MR environment, the choice of materials and power source of such phantoms is heavily restricted. Sophisticated commercial solutions are available; however, they are often relatively costly and user-specific modifications may not easily be implemented. We therefore sought to construct a low-cost MR-compatible motion phantom that could be easily reproduced and had design flexibility. A commercially available K'NEX construction set (Hyper Space Training Tower, K'NEX Industries, Inc., Hatfield, PA) was used to construct a periodically moving phantom head. The phantom head performs a translation with a superimposed rotation, driven by a motor over a 2-m rigid rod. To synchronize the MR data acquisition with phantom motion (without introducing radiofrequency-related image artifacts), a fiberoptic control unit generates periodic trigger pulses synchronized to the phantom motion. Total material costs of the phantom are US$ < 200.00, and a total of 80 man-hours were required to design and construct the original phantom. With schematics of the present solution, the phantom reproduction may be achieved in approximately 15 man-hours. The presented MR-compatible periodically moving phantom can easily be reproduced, and user-specific modifications may be implemented. Such an approach allows a detailed investigation of motion-related phenomena in MR images.

Tunable lumped-element bandpass filters for Cognitive Radio application

In this thesis the design of bandpass filters tunable at 400 MHz – 800 MHz was under research. Microwave filters are vital components which provide frequency selectivity in wide variety of electronic systems operating at high frequencies. Due to the occurrence of multi-frequency bands communication and diverse applications of wireless devices, requirement of tunable filters exists. The one of potential implementation of frequency-agile filters is frontends and spectrum sensors in Cognitive Radio (CR). The principle of CR is to detect and operate at a particular available spectrum without interfering with the primary user’s signals. This new method allows improving the efficiency of utilizing allocated spectrum such as TV band (400 MHz – 800 MHz). The focus of this work is development of sufficiently compact, low cost tunable filters with quite narrow bandwidth using currently available lumped-element components and PCB board technology. Filter design, different topologies and methods of tuning of bandpass filters are considered in this work. As a result, three types of topologies of bandpass filter were simulated and realised. They use digitally tunable capacitors (DTCs) for adjusting central frequency at TV "white space" spectrum. Measurements revealed that schematics presented in this work have proper output response and filters are successfully tuned by DTCs.

Model-Based Troubleshooting of Digital Systems

This thesis describes a methodology, a representation, and an implemented program for troubleshooting digital circuit boards at roughly the level of expertise one might expect in a human novice. Existing methods for model-based troubleshooting have not scaled up to deal with complex circuits, in part because traditional circuit models do not explicitly represent aspects of the device that troubleshooters would consider important. For complex devices the model of the target device should be constructed with the goal of troubleshooting explicitly in mind. Given that methodology, the principal contributions of the thesis are ways of representing complex circuits to help make troubleshooting feasible. Temporally coarse behavior descriptions are a particularly powerful simplification. Instantiating this idea for the circuit domain produces a vocabulary for describing digital signals. The vocabulary has a level of temporal detail sufficient to make useful predictions abut the response of the circuit while it remains coarse enough to make those predictions computationally tractable. Other contributions are principles for using these representations. Although not embodied in a program, these principles are sufficiently concrete that models can be constructed manually from existing circuit descriptions such as schematics, part specifications, and state diagrams. One such principle is that if there are components with particularly likely failure modes or failure modes in which their behavior is drastically simplified, this knowledge should be incorporated into the model. Further contributions include the solution of technical problems resulting from the use of explicit temporal representations and design descriptions with tangled hierarchies.

Atividade experimental e o desenvolvimento de competências e habilidades no currículo do estado de São Paulo

Pós-graduação em Educação para a Ciência - FC

Quatro Desenhos de Frank Lloyd Wright

O objetivo deste trabalho é discutir aspectos do processo de projeto e sua representação gráfica, num momento em que softwares de projeto 3D vem se tornando hegemônicos na prática do arquiteto e no ensino de arquitetura, em contraponto às práticas de desenho em prancheta. Os motivos e circunstâncias não são objeto do trabalho, cujo foco está numa prática de projeto e representação gráfica 2D, mas que tem muito a contribuir para o debate do quadro acima: os desenhos de projeto de Frank Lloyd Wright. Casos de estudo: quatro pranchas desenhadas por FLLW. É importante notar que, no vasto quadro da historiografia wrightiana, análises e interpretações originais, pioneiras, da arquitetura vem surgindo nas últimas décadas, mas ainda há poucos textos sobre desenhos e representação gráfica do arquiteto. Este constitui uma primeira aproximação do autor acerca de tema que oferece abrangente potencial. São exemplos em que, na relação imagem-objeto, a representação bidimensional constrói o projeto tridimensional. A arquitetura emerge como experimentação sem cair na especulação formal. Demonstram uma prática mais lenta, reflexiva e laboriosa do que a oferecida pelos software 3D atuais – mas onde cada traço, textura e grafismo implica um significado de espaço e materialidade.

Los planos del concurso para la ciudad de vacaciones Playa de San Juan en 1933

En 1933 se celebra el concurso de anteproyectos para la primera ciudad turística de España. Las bases de la convocatoria exigían una extensa documentación: planes, planos y perspectivas. El análisis de la propuesta vencedora —muy sensible a las preexistencias— pone de relieve la secuencia que liga la geografía con la ordenación urbana gracias al pensamiento y a las herramientas gráficas. Primero, se dibuja el territorio levantando acta del mismo recurriendo a los diagramas. Segundo, los datos y las vocaciones del suelo se transforman en una trama urbana zonificada en el espacio y programada en el tiempo. Y tercero, la fotografía del paisaje sugiere los enclaves panorámicos y algunas de las arquitecturas clave. En este hito de la planificación se dan cita las modernas técnicas gráficas y fotográficas que interactúan con el urbanismo moderno del zoning.

Physical model parameter optimisation for calibrated emulation of the Dallas Rangemaster Treble Booster guitar pedal

In this work we explore optimising parameters of a physical circuit model relative to input/output measurements, using the Dallas Rangemaster Treble Booster as a case study. A hybrid metaheuristic/gradient descent algorithm is implemented, where the initial parameter sets for the optimisation are informed by nominal values from schematics and datasheets. Sensitivity analysis is used to screen parameters, which informs a study of the optimisation algorithm against model complexity by fixing parameters. The results of the optimisation show a significant increase in the accuracy of model behaviour, but also highlight several key issues regarding the recovery of parameters.