Coverage overlapping problems in applications of IEEE 802.15.4 wireless sensor networks

IEEE 802.15.4 standard is a relatively new standard designed for low power low data rate wireless sensor networks (WSN), which has a wide range of applications, e.g., environment monitoring, e-health, home and industry automation. In this paper, we investigate the problems of hidden devices in coverage overlapped IEEE 802.15.4 WSNs, which is likely to arise when multiple 802.15.4 WSNs are deployed closely and independently. We consider a typical scenario of two 802.15.4 WSNs with partial coverage overlapping and propose a Markov-chain based analytical model to reveal the performance degradation due to the hidden devices from the coverage overlapping. Impacts of the hidden devices and network sleeping modes on saturated throughput and energy consumption are modeled. The analytic model is verified by simulations, which can provide the insights to network design and planning when multiple 802.15.4 WSNs are deployed closely. © 2013 IEEE.

Coverage overlapping problems in applications of IEEE 802.15.4 wireless sensor networks

IEEE 802.15.4 standard is a relatively new standard designed for low power low data rate wireless sensor networks (WSN), which has a wide range of applications, e.g., environment monitoring, e-health, home and industry automation. In this paper, we investigate the problems of hidden devices in coverage overlapped IEEE 802.15.4 WSNs, which is likely to arise when multiple 802.15.4 WSNs are deployed closely and independently. We consider a typical scenario of two 802.15.4 WSNs with partial coverage overlapping and propose a Markov-chain based analytical model to reveal the performance degradation due to the hidden devices from the coverage overlapping. Impacts of the hidden devices and network sleeping modes on saturated throughput and energy consumption are modeled. The analytic model is verified by simulations, which can provide the insights to network design and planning when multiple 802.15.4 WSNs are deployed closely. © 2013 IEEE.

Spatial coordinated medium sharing: Optimal access control management in drive-thru internet

Driven by the ever-growing expectation of ubiquitous connectivity and the widespread adoption of IEEE 802.11 networks, it is not only highly demanded but also entirely possible for in-motion vehicles to establish convenient Internet access to roadside WiFi access points (APs) than ever before, which is referred to as Drive-Thru Internet. The performance of Drive-Thru Internet, however, would suffer from the high vehicle mobility, severe channel contentions, and instinct issues of the IEEE 802.11 MAC as it was originally designed for static scenarios. As an effort to address these problems, in this paper, we develop a unified analytical framework to evaluate the performance of Drive-Thru Internet, which can accommodate various vehicular traffic flow states, and to be compatible with IEEE 802.11a/b/g networks with a distributed coordination function (DCF). We first develop the mathematical analysis to evaluate the mean saturated throughput of vehicles and the transmitted data volume of a vehicle per drive-thru. We show that the throughput performance of Drive-Thru Internet can be enhanced by selecting an optimal transmission region within an AP's coverage for the coordinated medium sharing of all vehicles. We then develop a spatial access control management approach accordingly, which ensures the airtime fairness for medium sharing and boosts the throughput performance of Drive-Thru Internet in a practical, efficient, and distributed manner. Simulation results show that our optimal access control management approach can efficiently work in IEEE 802.11b and 802.11g networks. The maximal transmitted data volume per drive-thru can be enhanced by 113.1% and 59.5% for IEEE 802.11b and IEEE 802.11g networks with a DCF, respectively, compared with the normal IEEE 802.11 medium access with a DCF.

Throughput analysis of primary and secondary networks in a shared IEEE 802.11 system

In this paper, we analyze the coexistence of a primary and a secondary (cognitive) network when both networks use the IEEE 802.11 based distributed coordination function for medium access control. Specifically, we consider the problem of channel capture by a secondary network that uses spectrum sensing to determine the availability of the channel, and its impact on the primary throughput. We integrate the notion of transmission slots in Bianchi's Markov model with the physical time slots, to derive the transmission probability of the secondary network as a function of its scan duration. This is used to obtain analytical expressions for the throughput achievable by the primary and secondary networks. Our analysis considers both saturated and unsaturated networks. By performing a numerical search, the secondary network parameters are selected to maximize its throughput for a given level of protection of the primary network throughput. The theoretical expressions are validated using extensive simulations carried out in the Network Simulator 2. Our results provide critical insights into the performance and robustness of different schemes for medium access by the secondary network. In particular, we find that the channel captures by the secondary network does not significantly impact the primary throughput, and that simply increasing the secondary contention window size is only marginally inferior to silent-period based methods in terms of its throughput performance.

Evaluating the impact of network density, hidden nodes and capture effect for throughput guarantee in multi-hop wireless networks

To optimize the performance of wireless networks, one needs to consider the impact of key factors such as interference from hidden nodes, the capture effect, the network density and network conditions (saturated versus non-saturated). In this research, our goal is to quantify the impact of these factors and to propose effective mechanisms and algorithms for throughput guarantees in multi-hop wireless networks. For this purpose, we have developed a model that takes into account all these key factors, based on which an admission control algorithm and an end-to-end available bandwidth estimation algorithm are proposed. Given the necessary network information and traffic demands as inputs, these algorithms are able to provide predictive control via an iterative approach. Evaluations using analytical comparison with simulations as well as existing research show that the proposed model and algorithms are accurate and effective.

High-throughput non-destructive nuclear magnetic resonance method to measure intramuscular fat content in beef

High intake of saturated fat from meats has been associated with cardiovascular disease, cancer, diabetes, and others diseases. In this paper, we are introducing a simple, high-throughput, and non-destructive low-resolution nuclear magnetic resonance method that has the potential to analyze the intramuscular fat content (IMF) in more than 1,000 beef portions per hour. The results can be used in nutritional fact labels, replacing the currently used average value. The method is based on longitudinal (T(1)) and transverse (T(2)) relaxation time information obtained by a continuous wave-free precession (CWFP) sequence. CWFP yields a higher correlation coefficient (r=0.9) than the conventional Carr-Purcell-Meiboom- Gill (CPMG) method (r=-0.25) for IMF in beef and is just as fast and a simpler pulse sequence than CPMG. The method can also be applied to other meat products.

Report : wireless data throughput testing on a mobile device using WiFi and GPRS

This project report presents the results of a study on wireless communication data transfer rates for a mobile device running a custombuilt construction defect reporting application. The study measured the time taken to transmit data about a construction defect, which included digital imagery and text, in order to assess the feasibility of transferring various types and sizes of data and the ICT-supported construction management applications that could be developed as a consequence. Data transfer rates over GPRS through the Telstra network and WiFi over a private network were compared. Based on the data size and data transfer time, the rate of transfer was calculated to determine the actual data transmission speeds at which the information was being sent using the wireless mobile communication protocols. The report finds that the transmission speeds vary considerably when using GPRS and can be significantly slower than what is advertised by mobile network providers. While WiFi is much faster than GPRS, the limited range of WiFi limits the protocol to residential-scale construction sites.

A two-Dimensional finite volume method for variable density flow and solute transport through saturated-unsaturated media

Extensive groundwater withdrawal has resulted in a severe seawater intrusion problem in the Gooburrum aquifers at Bundaberg, Queensland, Australia. Better management strategies can be implemented by understanding the seawater intrusion processes in those aquifers. To study the seawater intrusion process in the region, a two-dimensional density-dependent, saturated and unsaturated flow and transport computational model is used. The model consists of a coupled system of two non-linear partial differential equations. The first equation describes the flow of a variable-density fluid, and the second equation describes the transport of dissolved salt. A two-dimensional control volume finite element model is developed for simulating the seawater intrusion into the heterogeneous aquifer system at Gooburrum. The simulation results provide a realistic mechanism by which to study the convoluted transport phenomena evolving in this complex heterogeneous coastal aquifer.

Predicting the consumption of foods low in saturated fats among people diagnosed with Type 2 diabetes and cardiovascular disease. The role of planning in the theory of planned behaviour

The present study tested the utility of an extended version of the theory of planned behaviour that included a measure of planning, in the prediction of eating foods low in saturated fats among adults diagnosed with Type 2 diabetes and/or cardiovascular disease. Participants (N = 184) completed questionnaires assessing standard theory of planned behaviour measures (attitude, subjective norm, and perceived behavioural control) and the additional volitional variable of planning in relation to eating foods low in saturated fats. Self-report consumption of foods low insaturated fats was assessed 1 month later. In partial support of the theory of planned behaviour, results indicated that attitude and subjective norm predicted intentions to eat foods low in saturated fats and intentions and perceived behavioural control predicted the consumption of foods low in saturated fats. As an additional variable, planning predicted the consumption of foods low in saturated fats directly and also mediated the intention–behaviour and perceived behavioural control–behaviour relationships, suggesting an important role for planning as a post-intentional construct determining healthy eating choices. Suggestions are offered for interventions designed to improve adherence to healthy eating recommendations for people diagnosed with these chronic conditions with a specific emphasis on the steps and activities that are required to promote a healthier lifestyle.

Preliminary characterisation of the surface of cartilage following exposure to saturated and unsaturated synthetic lipids

Articular cartilage is covered by a microscopic structure known as surface amorphous layer. This surface structure is often the first victim of attack during cartilage degeneration, thereby resulting in a gross impairment in cartilage function such as lubrication and load bearing. We hypothesize that incubation of degraded cartilage in solutions of different species of synthetic surface active phospholipids (saturated and unsaturated species) can remodel this lost surface structure. To test this hypothesis, the structural configuration of the surface of articular cartilage was studied and characterised with the lipid filled surface amorphous layer intact using the AFM. The results were then compared with those obtained following a systematic removal (delipidization) and replacement (relipidization) of this layer. Our results show that the unsaturated surfactant partially restored the lost surface amorphous layer while the saturated surfactant specie settled on the surface due to its poor solubility in aqueous solution.

Political information choices in a media saturated environment : credibility or convenience?

This thesis examines the ways in which citizens find out about socio-political issues. The project set out to discover how audience characteristics such as scepticism towards the media, gratifications sought, need for cognition and political interest influence information selection. While most previous information choice studies have focused on how individuals select from a narrow range of media types, this thesis considered a much wider sweep of the information landscape. This approach was taken to obtain an understanding of information choices in a more authentic context - in everyday life, people are not simply restricted to one or two news sources. Rather, they may obtain political information from a vast range of information sources, including media sources (e.g. radio, television, newspapers) and sources from beyond the media (eg. interpersonal sources, public speaking events, social networking websites). Thus, the study included both media and non-news media information sources. Data collection for the project consisted of a written, postal survey. The survey was administered to a probability sample in the greater Brisbane region, which is the third largest city in Australia. Data was collected during March and April 2008, approximately four months after the 2007 Australian Federal Election. Hence, the study was conducted in a non-election context. 585 usable surveys were obtained. In addition to measuring the attitudinal characteristics listed above, respondents were surveyed as to which information sources (eg. television shows, radio stations, websites and festivals) they usually use to find out about socio-political issues. Multiple linear regression analysis was conducted to explore patterns of influence between the audience characteristics and information consumption patterns. The results of this analysis indicated an apparent difference between the way citizens use news media sources and the way they use information sources from beyond the news media. In essence, it appears that non-news media information sources are used very deliberately to seek socio-political information, while media sources are used in a less purposeful way. If media use in a non-election context, such as that of the present study, is not primarily concerned with deliberate information seeking, media use must instead have other primary purposes, with political information acquisition as either a secondary driver, or a by-product of that primary purpose. It appears, then, that political information consumption in a media-saturated society is more about routine ‘practices’ than it is about ‘information seeking’. The suggestion that media use is no longer primarily concerned with information seeking, but rather, is simply a behaviour which occurs within the broader set of everyday practices reflects Couldry’s (2004) media as practice paradigm. These findings highlight the need for more authentic and holistic contexts for media research. It is insufficient to consider information choices in isolation, or even from a wider range of information sources, such as that incorporated in the present study. Future media research must take greater account of the broader social contexts and practices in which media-oriented behaviours occur. The findings also call into question the previously assumed centrality of trust to information selection decisions. Citizens regularly use media they do not trust to find out about politics. If people are willing to use information sources they do not trust for democratically important topics such as politics, it is important that citizens possess the media literacy skills to effectively understand and evaluate the information they are presented with. Without the application of such media literacy skills, a steady diet of ‘fast food’ media may result in uninformed or misinformed voting decisions, which have implications for the effectiveness of democratic processes. This research has emphasized the need for further holistic and authentically contextualised media use research, to better understand how citizens use information sources to find out about important topics such as politics.

Free convection in a triangular enclosure with fluid-saturated porous medium and internal heat generation

Unsteady natural convection inside a triangular cavity has been studied in this study. The cavity is filled with a saturated porous medium with non-isothermal left inclined wall while the bottom surface is isothermally heated and the right inclined surface is isothermally cold. An internal heat generation is also considered which is dependent of the fluid temperature. The governing equations are solved numerically by finite element method. The Prandtl number of the fluid is considered as 0.7 (air) while the aspect ratio and the Rayleigh number are considered as 0.5 and 105 respectively. The effect of the porosity of the medium and heat generation on the fluid flow and heat transfer have been presented as a form of streamlines and isotherms. The rate of heat transfer through three surfaces of the enclosure is also presented.

Analysis of electromagnetic forces in high voltage superconducting fault current limiters with saturated core

This paper presents a three-dimensional numerical analysis of the electromagnetic forces within a high voltage superconducting Fault Current Limiter (FCL) with a saturated core under short-circuit conditions. The effects of electrodynamics forces in power transformer coils under short-circuit conditions have been reported widely. However, the coil arrangement in an FCL with saturated core differs significantly from existing reactive devices. The boundary element method is employed to perform an electromagnetic force analysis on an FCL. The analysis focuses on axial and radial forces of the AC coil. The results are compared to those of a power transformer and important design considerations are highlighted.