Neural network model for designing automotive devices using SMD LED

The advantages offered by the electronic component LED (Light Emitting Diode) have resulted in a quick and extensive application of this device in the replacement of incandescent lights. In this combined application, however, the relationship between the design variables and the desired effect or result is very complex and renders it difficult to model using conventional techniques. This paper consists of the development of a technique using artificial neural networks that makes it possible to obtain the luminous intensity values of brake lights using SMD (Surface Mounted Device) LEDs from design data. This technique can be utilized to design any automotive device that uses groups of SMD LEDs. The results of industrial applications using SMD LED are presented to validate the proposed technique.

Revisió morfológica de smd amb del(5q) aïllada i amb del (5q) + 1

Van den Berghe et al. va descriure el “Sdr. 5q-” com un SMD amb del(5q) aïllada, curs indolent, predomini femení, anèmia macrocítica, amb o sense trombocitosi i megacariocits monolobulats. El SMD amb del(5q) aïllada constitueix un subtipus específic de SMD en la classificació de la OMS. L’objectiu del estudi era revisar mostres de SP i MO de SMD amb del(5q) aïllada o amb del(5q) més una alteració citogenètica. Els resultats mostren la dificultat de classificació dels SMD amb les classificacions actuals, i suggereix que no hi ha diferencies entre els SMD amb del(5q) aïllada i els SMD amb del(5q) +1.

Detection of fingermarks by colloidal gold (MMD/SMD): beyond the pH 3 limit

This work is part of a continuing goal to improve the multimetal deposition technique (MMD), as well as the single-metal deposition (SMD), to make them more robust, more user-friendly, and less labour-intensive. Indeed, two major limitations of the MMD/SMD were identified: (1) the synthesis of colloidal gold, which is quite labour-intensive, and (2) the sharp decrease in efficiency observed when the pH of the working solution is increased above pH 3. About the synthesis protocol, it has been simplified so that there is no more need to monitor the temperature during the synthesis. The efficiency has also been improved by adding aspartic acid, conjointly with sodium citrate, during the synthesis of colloidal gold. This extends the range of pH for which it is possible to detect fingermarks in the frame of the MMD/SMD. The operational range is now extended from 2 to 6.7, compared to 2-3 for the previous formulations. The increased robustness of the working solution may improve the ability of the technique to process substrates that tend to increase the pH of the solution after their immersion.

Reliability of SMD interconnections on flexible low-temperature substrates with inkjet-printed conductors

julkaisumaa: NLD

Ast??rix y Ob??lix bombardean nuestro SMD

Se pone en com??n una experiencia educativa llevada a cabo con alumnado de 2.?? curso de Educaci??n Primaria en la isla de Tenerife. Lleva por t??tulo "Ideafix's restaurant" y nace, prioritariamente, ante el tedio que provoca en escolares el trabajo con el Sistema M??trico Decimal (SMD). Se desarrolla el trabajo cooperativo e interdisciplinar por competencias, desde las ??reas de matem??ticas, lengua castellana, conocimiento del medio, educaci??n pl??stica y visual y educaci??n para la ciudadan??a . A trav??s de las aventuras de los personajes de c??mic Ast??rix y Ob??lix, los diversos grupos trabajan un conjunto de actividades y un proyecto final en el que cada uno debe crear su propio negocio.

Effect Of Simulated Microwave Disinfection On The Linear Dimensional Change, Hardness And Impact Strength Of Acrylic Resins Processed By Different Polymerizing Cycles.

This study investigated the effect of simulated microwave disinfection (SMD) on the linear dimensional changes, hardness and impact strength of acrylic resins under different polymerization cycles. Metal dies with referential points were embedded in flasks with dental stone. Samples of Classico and Vipi acrylic resins were made following the manufacturers' recommendations. The assessed polymerization cycles were: A-- water bath at 74ºC for 9 h; B-- water bath at 74ºC for 8 h and temperature increased to 100ºC for 1 h; C-- water bath at 74ºC for 2 h and temperature increased to 100ºC for 1 h;; and D-- water bath at 120ºC and pressure of 60 pounds. Linear dimensional distances in length and width were measured after SMD and water storage at 37ºC for 7 and 30 days using an optical microscope. SMD was carried out with the samples immersed in 150 mL of water in an oven (650 W for 3 min). A load of 25 gf for 10 sec was used in the hardness test. Charpy impact test was performed with 40 kpcm. Data were submitted to ANOVA and Tukey's test (5%). The Classico resin was dimensionally steady in length in the A and D cycles for all periods, while the Vipi resin was steady in the A, B and C cycles for all periods. The Classico resin was dimensionally steady in width in the C and D cycles for all periods, and the Vipi resin was steady in all cycles and periods. The hardness values for Classico resin were steady in all cycles and periods, while the Vipi resin was steady only in the C cycle for all periods. Impact strength values for Classico resin were steady in the A, C and D cycles for all periods, while Vipi resin was steady in all cycles and periods. SMD promoted different effects on the linear dimensional changes, hardness and impact strength of acrylic resins submitted to different polymerization cycles when after SMD and water storage were considered.

Effect Of Simulated Microwave Disinfection On The Linear Dimensional Change, Hardness And Impact Strength Of Acrylic Resins Processed By Different Polymerization Cycles.

This study investigated the effect of simulated microwave disinfection (SMD) on the linear dimensional changes, hardness and impact strength of acrylic resins under different polymerization cycles. Metal dies with referential points were embedded in flasks with dental stone. Samples of Classico and Vipi acrylic resins were made following the manufacturers' recommendations. The assessed polymerization cycles were: A) water bath at 74 ºC for 9 h; B) water bath at 74 ºC for 8 h and temperature increased to 100 ºC for 1 h; C) water bath at 74 ºC for 2 h and temperature increased to 100 ºC for 1 h; and D) water bath at 120 ºC and pressure of 60 pounds. Linear dimensional distances in length and width were measured after SMD and water storage at 37 ºC for 7 and 30 days using an optical microscope. SMD was carried out with the samples immersed in 150 mL of water in an oven (650 W for 3 min). A load of 25 gf for 10 s was used in the hardness test. Charpy impact test was performed with 40 kpcm. Data were submitted to ANOVA and Tukey's test (5%). The Classico resin was dimensionally steady in length in the A and D cycles for all periods, while the Vipi resin was steady in the A, B and C cycles for all periods. The Classico resin was dimensionally steady in width in the C and D cycles for all periods, and the Vipi resin was steady in all cycles and periods. The hardness values for Classico resin were steady in all cycles and periods, while the Vipi resin was steady only in the C cycle for all periods. Impact strength values for Classico resin were steady in the A, C and D cycles for all periods, while Vipi resin was steady in all cycles and periods. SMD promoted different effects on the linear dimensional changes, hardness and impact strength of acrylic resins submitted to different polymerization cycles when after SMD and water storage were considered.

Simulação numérica da atomização de combustíveis com interesse para grandes motores diesel marítimos

Dissertação para obtenção do Grau de Mestre em Engenharia Mecânica

Avaliação da camada intermetálica em placas de circuito impresso com acabamento superficial HASL com diferentes processos de soldagem

Dissertação de mestrado integrado em Engenharia de Materiais

Disseny d'un sistema HW/SW de control remot amb dispositius FPGA

El projecte que es presenta a continuació, té com a objectiu implementar un sistema HW/SW encastat en una FPGA, capaç d’executar funcions de control remot per infraroig en plataformes de televisió flexibles de Sony Corp. El disseny obtingut, s’incorporarà a un sistema més ampli de verificació i test de circuits impresos, dins del marc de producció SMD. La finalitat d’aquest projecte, és la realització d’un sistema flexible per a la implementació de comandaments de comunicació per infraroig amb circuits impresos. Prèviament, s’ha estudiat els conceptes bàsics referents a la implementació de sistemes amb FPGAs, la seva metodologia de desenvolupament i les principals característiques de la seva arquitectura. Com a especificacions, s’ha utilitzat l’estàndard de control remot per infraroig de Sony Corp SIRCS (Sony Infrared remote control system).

Subjective Memory Deficits in People with and without Dementia: Findings from the 10/66 Dementia Research Group Pilot Studies in Low- and Middle-Income Countries

OBJECTIVES To compare subjective memory deficit (SMD) in older adults with and without dementia or depression across multiple centers in low- and middle-income countries (LAMICs). DESIGN Secondary analysis of data from 23 case control studies. SETTING Twenty-three centers in India, Southeast Asia (including China), Latin America and the Caribbean, Nigeria, and Russia. PARTICIPANTS Two thousand six hundred ninety-two community-dwelling people aged 60 and older in one of three groups: people with dementia, people with depression, and controls free of dementia and depression. MEASUREMENTS SMD was derived from the Geriatric Mental State examination. RESULTS Median SMD frequency was lowest in participants without dementia (26.2%) and higher in those with depression (50.0%) and dementia (66.7%). Frequency of SMD varied between centers. Depression and dementia were consistently associated with SMD. Older age and hypochondriasis were associated with SMD only in subjects without dementia. In those with dementia, SMD was associated with better cognitive function, whereas the reverse was the case in controls. CONCLUSION Associations with SMD may differ between subjects with and without dementia living in LAMICs.

Análisis de las causas de muerte en pacientes con síndrome mielodiplásico: experiencia de un centro

Los síndrome mielodisplásicos (SMD) son un conjunto de neoplasias hematológicas muy heterogéneas en cuanto a evolución clínica y pronóstico, que van desde enfermedades indolentes hasta enfermedades agresivas, con una rápida progresión a LMA y una supervivencia inferior a un año. Las causas de muerte (CDM) de los SMD no están bien estudiadas, particularmente la CDM no leucémica. La importancia de conocer las CDM, radica en la implicación terapeútica. En este estudio se demuestra que la mayoría de los SMD, independientemente del grupo de riesgo, fallecen de causas relacionadas con el SMD, lo que justificaría una intevención terapeútica precoz.

Recherche de l'expression de la lamine A et de la progérine chez des patients avec un syndrome myélodysplasique/syndrome myéloprolifératif avec thrombocytose

Les syndromes myélodysplasiques (SMD) et myéloprolifératifs (SMP) sont des maladies qui touchent les cellules souches de la moelle hématopoïétique. Les symptômes varient selon le sous-type de SMD ou SMP allant de l'anémie à la polyglobulie, de la leucopénie à la leucocytose et de la thrombopénie à la thrombocytose. Ces syndromes se développent à la suite de mutations acquises qui provoquent des anomalies des cellules souches. En outre, plusieurs études ont mis en évidence des anomalies de processus épigénétiques comme l'hyperméthylation de l'ADN et la déacéthylation des histones. La maladie de Hutchinson-Gilford ou progéria est provoquée par une mutation sur le gène de la lamine A (protéine de l'enveloppe nucléaire) qui a pour conséquence l'augmentation de l'utilisation d'un site de splicing normalement peu utilisé ce qui engendre une protéine anormale, la progérine. Cette protéine a pour effet de modifier les processus épigénétiques. Une étude récente sur des patients souffrant de progéria a révélé la présence d'une thrombocytose chez tous les patients. Le but du présent travail a été d'étudier l'expression de la lamine A et de la progérine chez les patients souffrant de SMD ou SMP avec une thrombocytose suivis par le Service d'hématologie du CHUV. Nous avons sélectionné parmi les patients souffrant de SMD ou SMP ceux avec une thrombocytose supérieure à 400 G/l au moment du diagnostic. Nous avons ensuite effectué une PCR pour détecter la lamine A et la mutation de la lamine A que l'on trouve dans la progéria. Sur les 33 patients sélectionnés, nous avons pu analyser les échantillons de 18 d'entre eux. Le matériel était issu de cellules mononucléées ou de granulocytes. Les résultats démontrent la présence de la lamine A et l'absence de la mutation trouvée dans la progéria chez 16 patients. Cependant, chez 2 patients, la PCR laisse suspecter la présence de progérine en plus de celle de la lamine A. D'autres investigations seront nécessaires pour confirmer cette dernière observation. S'il s'avère que la progérine est effectivement présente chez ces deux patients, il faudrait étendre l'analyse à d'autres patients avec une hémopathie maligne. Plusieurs publications rapportent l'absence de lamine A dans les cellules hématopoïétiques. Cependant, le présent travail démontre clairement que les cellules mononucléées du sang ou de la moelle osseuse de certains patients avec SMP/SMD expriment la lamine A. Nous n'avons toutefois pas étudié si la lamine A et, éventuellement la progérine, sont exprimées par les cellules hématopoïétiques normales. En conclusion, ce travail a révélé qu'il serait très intéressant d'étudier le rôle potentiel des lamines nucléaires et en particulier de la lamine A et de la progérine dans l'hématopoïèse et le développement des SMD/SMP et d'autres hémopathies malignes. Il a donc ouvert la voie pour de futurs projets de recherche.

Single-metal deposition: optimization of this fingermark enhancement technique

Following the introduction of single-metal deposition (SMD), a simplified fingermark detection technique based on multimetal deposition, optimization studies were conducted. The different parameters of the original formula were tested and the results were evaluated based on the contrast and overall aspect of the enhanced fingermarks. The new formula for SMD was found based on the most optimized parameters. Interestingly, it was found that important variations from the base parameters did not significantly affect the outcome of the enhancement, thus demonstrating that SMD is a very robust technique. Finally, a comparison of the optimized SMD with multi-metal deposition (MMD) was carried out on different surfaces. It was demonstrated that SMD produces comparable results to MMD, thus validating the technique.