The effect of proton radiation on a superlumine scent diode (SLD)

The effect of proton radiation on a superluminescent diode (SLD) was studied, and the radiation damage from different energies was compared. The results reveal that the optical power degradation is greater from 350 KeV protons than from 1 MeV protons. Analysis of SLD characteristics after irradiation shows that the main effect of radiation is damage within the active region. At the same time, the results also show that quantum-well (QW) SLDs are far less sensitive to radiation than double-heterojunction (DH) SLDs. (C) 2007 Elsevier B.V. All rights reserved.

Study of Si/SiO2 hybrid antireflective coatings on SLD prepared by DSEBET - art. no. 69842P

We introduce a double source electron beam evaporation (DSEBET) technique in this paper. The refractive index coatings were fabricated on K9 glass substrate by adjusting the evaporation rates of two independent sources. The coatings, which were described by atomic force microscopy (AFM), show good compactness and homogeneity. The antireflective (AR) coatings were fabricated on Superluminescent Diodes (SLD) by DSEBET. The hybrid AR coatings on the facets of SLD were prepared in evaporation rates of 0.22nm/s and 0.75nm/s for silicon and silicon dioxide, respectively. The results of AFM and spectral performance of coated SLD show that DSEBET has a promising future in preparing the coatings on optoelectronic devices.

Avaliação da autopercepção estética e qualidade de vida em pessoas vivendo com HIV/AIDS com síndrome lipodistrófica (SLD) em uso de antirretrovirais

Em 1996 com a introdução no Brasil da Highly Active Antiretroviral Therapy (HAART) melhorando a sobrevida e diminuindo o número de óbitos entre os portadores do HIV/Aids, surgem relatos de alterações metabólicas e morfológicas - Síndrome Lipodistrófica (SLD). Portanto, este estudo busca avaliar a partir da autopercepção estética de pessoas que vivem com HIV/AIDS (PVHA) em uso de terapia antirretroviral (TARV) o impacto da SLD na qualidade de vida. Pesquisa exploratória observacional com dados quantitativos e qualitativos, que contou com a multidisciplinaridade, a partir dos critérios de inclusão os voluntários eram captados pelo médico infectologista assistente. Foi realizada com base nos princípios da Resolução 196/96-CNP. A amostra foi composta por 48 PVHA, com idade entre 32 a 66 anos. 89,6% demonstraram interesse em mudar partes do corpo que perceberam enquanto alteradas ou comprometidas pela SLD, dado reforçado quando estes afirmam que se percebem (35,4%) e sentem (35,4%) que as outras pessoas os vêem de forma diferente. Quanto a qualidade de vida o domínio da espiritualidade, religião e crenças pessoais alcançou maior média (14,7) com DP 4,0 neste estudo. A pesquisa permitiu uma publicação internacional (Journal of Public Health and Epidemiology-JPHE) e várias participações com publicação em eventos (nacionais e internacionais). O estudo sugere que a infecção por HIV e a presença da SLD a partir da autopercepção dos sujeitos entrevistados pode afetar a qualidade de vida. E destaca a importância de ações que ressaltem o suporte social como motivador para o autocuidado

RESULTS FROM THE SLD BARREL CRID DETECTOR

We report on operational experience with an experimental performance of the SLD barrel Cherenkov Ring Imaging Detector from the 1992 and 1993 physics runs. The liquid (C6F14) and gas (C5F12) radiator recirculation systems have performed well, and the drift gas supply system has operated successfully with TMAE for three years. Cherenkov rings have been observed from both the liquid and gas radiators. The number and angular resolution of Cherenkov photons have been measured, and found to be close to design specifications.

PERFORMANCE OF THE SLD BARREL CRID DURING THE 1992 PHYSICS DATA RUN

The SLD Barrel Cherenkov Ring Imaging Detector was fully operational in the 1992 physics data run. The electron drift velocity and magnetic field deflection of electron trajectories have been measured. Cherenkov rings have been observed from both the liquid and gas radiators. The number and the resolution of the angle of Cherenkov photons have been measured to be approximately equal to design specifications.

THE FLUID SYSTEMS FOR THE SLD CHERENKOV RING IMAGING DETECTOR

We describe the design and operation of the fluid delivery, monitor and control systems for the SLD barrel Cherenkov Ring Imaging Detector (CRID). The systems deliver drift gas (C2H6+TMAE), radiator gas (C5F12+N2) and radiator liquid (C6F14). MeasUred critical quantities such as electron lifetime in the drift gas and ultra-violet (UV) transparencies of the radiator fluids, together with the operational experience, are also reported.

Uald' söld'ring tialen ün söld.

Mode of access: Internet.

Using a Bilingual Reading Strategy to Reduce SLD Numbers

Studies show that for Spanish speaking students, vocabulary expansion in Spanish increases fluency and comprehension in English. Therefore, creating a bilingual reading intervention program with a strong emphasis on vocabulary building in the early grades will help improve the students’ overall reading comprehension in English and avoid improper placement.

Estudo de fatores prognósticos em pacientes submetidos ao transplante de medula óssea para tratamento de leucemia mielóide crônica.

O presente estudo compreende 96 transplantes de medula óssea (TMO) de doadores HLA-idênticos em pacientes portadores de Leucemia Mielóide Crônica, no período de Junho de 1986 a Junho de 1998. A autora selecionou diversas covariáveis para serem estudadas como fatores prognósticos de cinco desfechos principais: ocorrência de doença enxerto contra hospedeiro (DECH) aguda e crônica, incidência de recaída, sobrevida livre de doença (SLD) e sobrevida global (SG). As covariáveis estudadas foram: idade, sexo, escolaridade, tempo entre o diagnóstico e o transplante, fase da doença ao transplante, regime de condicionamente, profilaxia de DECH, compatibilidade de sexo entre doador e receptor, sexo do doador, tamanho do baço e do fígado, percentagem de blastos e número de plaquetas no sangue periférico na primeira consulta ao CEMO, ocorrência e grau de DECH aguda, ocorrência de DECH crônica e tempo para recuperação de plaquetas após o TMO. Não foi encontrada associação estatisticamente significativa num nível de 95% de confiança entre qualquer das covariáveis e a ocorrência de DECH crônica ou de recaída. A ocorrência de DECH aguda mostrou-se associada apenas com a fase da doença ao transplante. As covariáveis que se mostraram associadas com a sobrevida global e a sobrevida livre de doença foram: a percentagem de blastos no sangue periférico e tamanho do baço na primeira consulta ao CEMO, a fase da doença ao transplante, o tipo de profilaxia de DECH, a ocorrência e o grau de DECH aguda e o tempo para recuperação de plaquetas num nível acima de 20 x 103/mm3.

High speed titanium coatings by supersonic laser deposition

The importance of metal coating technologies drives the continuous improvement of metal deposition techniques for application in a wide range of industrial sectors. This work presents the foundations of a new process technology for the deposition of titanium coatings on steel tube substrates using supersonic powder streams and impact site laser heating, known as Supersonic Laser Deposition (SLD). Metallic deposits are obtained under appropriate impact conditions without the need for exceeding the melting point of the deposited material or substrate leading to improved coating quality. Details of the experimental approach are presented along with the general characteristics of the titanium coating produced using this novel coatings method. © 2011 Elsevier B.V. All rights reserved.

Hardfacing using supersonic laser depostion of stellite-6

The capability of manufacturing coatings is of central importance in engineering design. Many components require nowadays the application of additional layers, to enhance mechanical properties and protect against hostile environments. Supersonic Laser Deposition (SLD) is a novel coating method, based upon Cold Spray (CS) principles. In this technique the deposition velocities can be significantly lower than those required for effective bonding in CS applications. The addition of laser heat energy permits a change in the thermodynamic experience of impacting particles, thereby offering a greater opportunity for metallurgical bonding at lower velocities compared to the CS process technology. The work reported in this paper demonstrates the ability of the SLD process to deliver hard facing materials to engineering surfaces. Stellite-6 has been deposited on low carbon steel tubes over a range of process parameters, determining the appropriate target power and traverse speeds for coating deposition. Coating properties and parameters were examined to determine the main properties, micro-structure and processing cost. Their morphology was studied through optical microscopy, SEM and X-Ray Diffraction. The results have shown that SLD is capable of depositing Stellite-6, with enhanced properties compared to laser clad counterparts.

Performance comparison of Stellite 6® deposited on steel using supersonic laser deposition and laser cladding

Stellite 6® powders were deposited on carbon steel using Supersonic Laser Deposition. The microstructure and performance of the coatings were examined using SEM, optical microscopy, EDS, XRD, microhardness testing and pin-on-disc wear testing. The results showed that the microstructure and wear behaviour of the most successful SLD deposition conditions with N2 at a pressure of 30bar, a temperature of 450°C and a deposition power of 1.5kW were compared with that of optimised laser cladding. © 2012 Elsevier B.V.

A novel extremely broadband superluminescent diode based on symmetric graded tensile-strained bulk InGaAs

A novel broadband superluminescent diode (SLD), which has a symmetric graded tensile-strained bulk InGaAs active region, is developed. The symmetric-graded tensile-strained bulk InGaAs is achieved by changing the group III TMGa source flow only during its growth process by low-pressure metalorganic vapor-phase epitaxy (LP-MOVPE), in which the much different tensile strain is introduced simultaneously. At 200mA injection current, the full width at half maximum (FWHM) of the emission spectrum of the SLID can be up to 122nm, covering the range of 1508-1630nm, and the output power is 11.5mW.