Diseño y caracterización de sistemas nanoestructurados a partir de copolímeros SBM

215 p.

Analysis of the Technical Efficiency of Urban Bus Services in Spain Based on SBM Models

During the first decade of the new millennium, fueled by the economic development in Spain, urban bus services were extended. Since the years 2008 and 2009, the root of the economic crisis, the improvement of these services is at risk due to economic problems. In this paper, the technical efficiency of the main urban bus companies in Spain during the 2004–2009 period are studied using SBM (slack-based measures) models and by establishing the slacks in the services' production inputs. The influence of a series of exogenous variables on the operation of the different services is also analyzed. It is concluded that only the 24% of the case studies are efficient, and some urban form variables can explain part of the inefficiency. The methodology used allows studying the inefficiency in a disaggregated way that other DEA (data envelopment analysis) models do not.

Effectiveness of powered hospital bed movers for reducing physiological strain and back muscle activation

Battery powered bed movers are becoming increasingly common within the hospital setting. The use of powered bed movers is believed to result in reduced physical efforts required by health care workers, which may be associated with a decreased risk of occupation related injuries. However, little work has been conducted assessing how powered bed movers impact on levels of physiological strain and muscle activation for the user. The muscular efforts associated with moving hospital beds using three different methods; manual pushing, StaminaLift Bed Mover (SBM) and Gzunda Bed Mover (GBM)were measured on six male subjects. Fourteen muscles were assessed moving a weighted hospital bed along a standardized route in an Australian hospital environment. Trunk inclination and upper spine acceleration were also quantified. Powered bed movers exhibited significantly lower muscle activation levels than manual pushing for the majority of muscles. When using the SBM, users adopted a more upright posture which was maintained while performing different tasks (e.g. turning a corner, entering a lift), while trunk inclination varied considerably for manual pushing and the GBM. The reduction in lower back muscular activation levels and the load reducing effect of a more upright posture may result in lower incidence of lower back injury.

Superstars and disloyal football fans : factors influencing attraction to competition

Purpose – The purpose of this paper is to examine the effect of superstars (and other factors) on football fans’ attraction to competition (i.e. disloyal behavior). Design/methodology/approach – A proprietary data set including archival data on professional German football players and clubs as well as survey data of more than 900 football fans is used. The hypotheses are tested with two-sample mean-comparison t-tests and multivariate probit models. Findings – This study provides evidence that superstars both attract new fans and contribute to the retention of existing fans. While the presence of superstars, team loyalty and team identification prevent football fans from being attracted to competition, the team's recent performance seems to have no effect. Fans who select their favorite player from a competing team rather choose superstars, young players, players who are known for exemplary behavior and defenders. Originality/value – This paper contributes to existing research by expanding the list of antecedents of disloyalty and by being the first to employ independent, quantitative data for the assessment of superstar characteristics in the context of team loyalty.

Novel insights on functions of myotilin/palladin family members

Poikkijuovaisen luuranko- ja sydänlihaksen supistumisyksikkö, sarkomeeri, koostuu tarkoin järjestyneistä aktiini- ja myosiinisäikeistä. Rakenne eroaa muista solutyypeistä, joissa aktiinisäikeistö muovautuu jatkuvasti ja sen järjestyminen säätelee solun muotoa, solujakautumista, soluliikettä ja solunsisäisten organellien kuljetusta. Myotilin, palladin ja myopalladin kuuluvat proteiiniperheeseen, jonka yhteispiirteenä ovat immunoglobuliinin kaltaiset (Igl) domeenit. Proteiinit liittyvät aktiinitukirankaan ja niiden arvellaan toimivan solutukirangan rakenne-elementteinä ja säätelijöinä. Myotilinia ja myopalladinia ilmennetään poikkijuovaisessa lihaksessa. Sen sijaan palladinin eri silmukointimuotoja tavataan monissa kudostyypeissä kuten hermostossa, ja eri muodoilla saattaa olla solutyypistä riippuvia tehtäviä. Poikkijuovaisessa lihaksessa kaikki perheen jäsenet sijaitsevat aktiinisäikeitä yhdistävässä Z-levyssä ja ne sitovat Z-levyn rakenneproteiinia, -aktiniinia. Myotilingeenin pistemutaatiot johtavat periytyviin lihastauteihin, kun taas palladinin mutaatioiden on kuvattu liittyvän periytyvään haimasyöpään ja lisääntyneeseen sydäninfarktin riskiin. Tässä tutkimuksessa selvitettin myotilinin ja pallainin toimintaa. Kokeissa löydettiin uusia palladinin 90-92kDa alatyyppiin sitoutuvia proteiineja. Yksi niistä on aktiinidynamiikkaa säätelevä profilin. Profilinilla on kahdenlaisia tehtäviä; se edesauttaa aktiinisäikeiden muodostumista, mutta se voi myös eristää yksittäisiä aktiinimolekyylejä ja edistää säikeiden hajoamista. Solutasolla palladinin ja profilinin sijainti on yhtenevä runsaasti aktiinia sisältävillä solujen reuna-alueilla. Palladinin ja profilinin sidos on heikko ja hyvin dynaaminen, joka sopii palladinin tehtävään aktiinisäideiden muodostumisen koordinoijana. Toinen palladinin sitoutumiskumppani on aktiinisäikeitä yhteensitova -aktiniini. -Aktiniini liittää solutukirangan solukalvon proteiineihin ja ankkuroi solunsisäisiä viestintämolekyylejä. Sitoutumista välittävä alue on hyvin samankaltainen palladinissa ja myotilinissa. Luurankolihaksen liiallinen toistuva venytys muuttaa Z-levyjen rakennetta ja muotoa. Prosessin aikana syntyy uusia aktiinifilamenttejä sisältäviä tiivistymiä ja lopulta uusia sarkomeereja. Löydöstemme perusteella myotilinin uudelleenjärjestyminen noudattaa aktiinin muutoksia. Tämä viittaa siihen, että myotilin liittää yhteen uudismuodostuvia aktiinisäikeitä ja vakauttaa niitä. Myotilin saattaa myös ankkuroida viesti- tai rakennemolekyylejä, joiden tehtävänä on edesauttaa Z-levyjen uudismuodostusta. Tulostemme perusteella arvelemme, että myotilin toimii Z-levyjen rakenteen vakaajana ja aktiinisäikeiden säätelijänä. Palladinin puute johtaa sikiöaikaiseen kuolemaan hiirillä, mutta myotilinin puutoksella ei ole samanlaisia vaikutuksia. Tuotettujen myotilin poistogeenisten hiirten todetiin syntyvän ja kehittyvän normaalisti eikä niillä esiintynyt rakenteellisia tai toiminnallisia häiriöitä. Toisaalta aiemmissa kokeissa, joissa hiirille on siirretty ihmisen lihastautia aikaansaava myotilingeeni, nähdään samankaltaisia kuin sairailla ihmisillä. Näin ollen muuntunut myotilin näyttä olevan lihaksen toiminnalle haitallisempi kuin myotilinin puute. Myotilinin ja palladinin yhteisvaikutusta selvittääksemme risteytimme myotilin poistegeenisen hiiren ja hiirilinjan, joka ilmentää puutteellisesti palladinin 200 kDa muotoa. Puutteellisesti 200 kDa palladinia ilmentävien hiirten sydänlihaksessa todettiin vähäisiä hienorakenteen muutoksia, mutta risteytetyillä hiirillä tavattiin rakenteellisia ja toiminnallisia muutoksia myös luurankolihaksessa. Tulosten perusteella voidaan todeta, että palladinin 200 kDa muoto säätelee sydänlihassolujen rakennetta. Luurankolihaksessa sen sijaan myotilinilla ja palladinilla näyttäisi olevan päällekkäisiä tehtäviä.

Influence of strain softening on the fracture of plain concrete beams

Fracture behaviour of notched and un-notched plain concrete slender beams subjected to three-point or four-point bending is analyzed through a one-dimensional model, also called Softening Beam Model. Fundamental equations of equilibrium are used to develop the model. The influence of structural size in altering the fracture mode from brittle fracture to plastic collapse is explained through the stress distribution across the uncracked ligament obtained by varying the strain softening modulus. It is found that at the onset of fracture instability, stress at the crack tip is equal to zero. The maximum load and fracture load are found to be different and a unique value for the fracture load is obtained. It is shown that the length of the fracture process zone depends on the value of the strain softening modulus. Theoretical limits for fracture process zone length are also calculated. Several nonlinear fracture parameters, such as, crack tip opening displacement, crack mouth opening displacement and fracture energy are computed for a wide variety of beam specimens reported in the literature and are found to compare very well with experimental and theoretical results. It is demonstrated that by following a simple procedure, both pre-peak and post-peak portions of load versus crack mouth opening displacement curve can be obtained quite accurately. Further, a simple procedure to calculate the maximum load is also developed. The predicted values of maximum load are found to agree well with the experimental values. The Softening Beam Model (SBM), proposed in this investigation is very simple and is based on rational considerations. It can completely describe the fracture process from the beginning of formation of the fracture process zone till the onset of fracture instability.A l'aide d'un modèle unidimensionnel dit ldquoSoftening Beam Modelrdquo (SBM), on analyse le comportement à rupture de poutres élancées pleines entaillées ou non, soumises en flexion en trois ou quatre points. Des équations fondamentales d'équilibre sont utilisées pour développer le modèle. On explique l'influence de la taille du composant sur l'altération du mode de rupture en rupture fragile et en effondrement plastique par la distribution par la distribution des contraintes sur le ligament non fissuré lorsque varie le module d'adoucissement. On trouve que la contrainte à l'extrémité de la fissure est nulle est nulle au début de l'instabilité de la rupture. La charge maximum et la charge à la rupture sont trouvées différentes, et on obtient une valeur unique de la charge à la rupture. On montre que la longueur de la zone concernée par le processus de rupture d'pend de la valeur du module d'adoucissement. On calcule également les limites théoriques de longueur de cette zone. Divers paramètres de rupture non linéaire sont calculés pour une large gamme d'éprouvettes en poutres reprises dans la littérature; on trouve qu'il existe une bonne concordance avec les résultats expérimentaux et théoriques. On démontre qu'en suivant une procédure simple on peut obtenir avec une bonne précision la courbe reliant les portions avant et après le pic de sollicitation en fonction du COD de la fissure. En outre, on développe une procédure simple pour calculer la charge maximum. Les valeurs prédites sont en bon accord avec les valeurs expérimentales. Le modèle SBM proposé est très simple et est basé sur des considérations rationnelles. Il est susceptible de décrire complètement le processus de rupture depuis le début de la formation de la zone intéressée jusqu'à l'amorçage de la rupture instable.

Effects of different levels of energy and protein sources on the growth performance, feeding, survival rate and the chemical body composition of juvenile Pacific white shrimp (Litopenaeus vannamei)

The present study was carried out in order to establish an economical effective diet for the pacific white shrimp in the southern part conditions of Iran. With the consideration of three dietary energy levels (E1=262, E2=312, E3=362 kcal 100 g-1 diet) and six ratios of fish meal (FM) to soybean meal (SBM) [(P1=100%FM+0%SBM, P2=80%FM+20%SBM, P3=60%FM+40%SBM, P4=40%FM+60%SBM, P5=20%FM+80%SBM, P6=0%FM+100%SBM)], 18 experimental diets (with 36% crude protein) were prepared. Completely randomized design was used to assign 54 polyethylene 300 litre round tanks provided by aeration and flow through water system and was stocked by 19 juvenile as 3 replicates to each treatment. Shrimps average weight was about 0.77 grams at the start. After 56 days culture period, maximum growth and nutritional performances were observed in the P6E1 treatment (containing 100% soybean meal and 262 kcal 100 g-1 diet) and P5E1 treatment (containing 80% soybean meal and 262 kcal 100 g-1 diet). Also the highest survival rate of the shrimps was observed in the P1E1, P1E2, P3E3 and P5E3 treatments. Additionally interactive effect of different protein ratios and energy levels had significant difference on body protein, fat, fiber and ash contents (P<0.05). Results of the present study suggest the possibility replacement of at least 80% of dietary fish meal by soybean meal in the diet of pacific white shrimp in the conditions of southern part of Iran.

A literature and practice review to develop sustainable business model archetypes

Eco-innovations, eco-efficiency and corporate social responsibility practices define much of the current industrial sustainability agenda. While important, they are insufficient in themselves to deliver the holistic changes necessary to achieve long-term social and environmental sustainability. How can we encourage corporate innovation that significantly changes the way companies operate to ensure greater sustainability? Sustainable business models (SBM) incorporate a triple bottom line approach and consider a wide range of stakeholder interests, including environment and society. They are important in driving and implementing corporate innovation for sustainability, can help embed sustainability into business purpose and processes, and serve as a key driver of competitive advantage. Many innovative approaches may contribute to delivering sustainability through business models, but have not been collated under a unifying theme of business model innovation. The literature and business practice review has identified a wide range of examples of mechanisms and solutions that can contribute to business model innovation for sustainability. The examples were collated and analysed to identify defining patterns and attributes that might facilitate categorisation. Sustainable business model archetypes are introduced to describe groupings of mechanisms and solutions that may contribute to building up the business model for sustainability. The aim of these archetypes is to develop a common language that can be used to accelerate the development of sustainable business models in research and practice. The archetypes are: Maximise material and energy efficiency; Create value from 'waste'; Substitute with renewables and natural processes; Deliver functionality rather than ownership; Adopt a stewardship role; Encourage sufficiency; Re-purpose the business for society/environment; and Develop scale-up solutions. © 2014 The Authors. Published by Elsevier Ltd. All rights reserved.

Study of GaN epilayers growth on freestanding Si cantilevers

Five-micron thick freestanding Si cantilevers were fabricated on bulk Si (1 1 1) substrates with surface/bulk micromachining (SBM) process. Then 1-mu m thick GaN layers were deposited on the Si cantilevers by metal-organic chemical vapor deposition (MOCVD). Epilayers on cantilever areas were obtained crack-free, and the photoluminescence (PL) spectra verified the stress reduction and better material quality in these suspended parts of GaN. Back sides of the cantilevers were also covered with GaN layers, which prevented the composite beams from bending dramatically. This paper had proved the feasibility of integrating high-quality GaN epilayers with Si micromechanical structures to realize GaN-based micro electro-mechanical system (MEMS). (C) 2009 Elsevier Ltd. All rights reserved.

Using a brief questionnaire to assess the overall perception of basketball spectators

Purpose – The purpose of this paper is twofold. The first aim is to obtain a valid and reliable instrument for the holistic analysis of sporting events, and the second is to test a causal model in which future intentions depend on spectators’ perceptions of quality, satisfaction, and value of these events. Design/methodology/approach – A total of 493 spectators of a professional basketball team in the Spanish ACB league responded to a survey to measure the overall performance of the sporting event service. Exploratory factor analysis and further confirmatory factor analysis using structural equation models provides the methodology for testing the reliability and validity of the instrument. Findings – The scales have adequate reliability and validity indices. The path model explains 35.8 percent of the variance in future intentions, 54.0 percent in perceived value, and 49.5 percent in spectators’ satisfaction. Quality proves a better predictor of perceived value than satisfaction. Both perceived value and satisfaction have a similar weight in predicting spectators’ future intentions. The data indicate that quality has an effect on spectators’ future intentions, by altering their perceptions of value and satisfaction. Research limitations/implications – The research findings are somewhat limited, due to the sample consisting entirely of spectators of a single team in the Spanish ACB league. Practical implications – Managers can use these findings to develop loyalty strategies by creating service value and increasing spectators’ satisfaction through quality improvements. Originality/value – This study contributes to the literature on service quality by providing an overall measure to assess service in professional sporting events in a Latin-American context.

Rôle de la Prohibitine et de la sumoylation dans la pathogenèse de l’ostéoarthrose

L'ostéoarthrose (OA) est la forme la plus commune d’arthrite et son étiologie demeure encore méconnue. Les travaux du Dr Moreau et son équipe ont permis de mettre en évidence une quasi perte d’expression du facteur de transcription Pitx1 dans les chondrocytes OA et la protéine PHB-1 a été identifiée comme étant membre d’un complexe répresseur pouvant lier le promoteur de Pitx1. Le but de la présente étude était de confirmer l’accumulation anormale de PHB-1 dans le noyau des chondrocytes OA, tel que suggéré par des données préliminaires, et d’identifier les mécanismes impliqués dans son import ou rétention au noyau. Pour ce faire, un volet mécanistique utilisant les lignées C28/I2 et U2OS fut combiné à l’étude clinique des chondrocytes articulaires de patients OA et de sujets sains. Les résultats de cette étude démontrent que chez 55 pourcent des patients OA, la Prohibitine s’accumule dans le noyau des chondrocytes articulaires et que cette accumulation corrèle avec une augmentation de la sumoylation totale dans le noyau des cellules OA. Le présent projet de recherche propose pour la première fois qu’une sumoylation accrue au sein des cellules OA pourrait être responsable de l’accumulation nucléaire de PHB-1, médiée par sa liaison aux protéines SUMO-1 via un domaine de liaison aux SUMOs (SBM) localisé aux résidus 76 à 79 de PHB-1. Les résultats de cette étude ont aussi permis de mettre en évidence que dans les chondrocytes OA, les protéines SUMO-1 et SUMO-2/3 s’accumulent dans des corps nucléaires de type PML, suggérant un recrutement de protéines interagissant avec les SUMOs au sein de ces structures dans les cellules OA. Nous sommes persuadés que cette étude générera des retombées importantes non seulement au niveau fondamental pour la compréhension des mécanismes moléculaires liés à la biologie des chondrocytes articulaires, mais aussi au niveau du développement d’outils génétiques permettant le dépistage de l’arthrose à un stade précoce.

Virulence Potential And Antibiotic Susceptibility Pattern Of Motile Aeromonads Associated With Freshwater Ornamental Fish Culture Systems: A Possible Threat To public Health

Aeromonas spp. are ubiquitous aquatic organisms, associated with multitude of diseases in several species of animals, including fishes and humans. In the present study, water samples from two ornamental fish culture systems were analyzed for the presence of Aeromonas. Nutrient agar was used for Aeromonas isolation, and colonies (60 No) were identified through biochemical characterization. Seven clusters could be generated based on phenotypic characters, analyzed by the programme NTSYSpc, Version 2.02i, and identified as: Aeromonas caviae (33.3%), A. jandaei (38.3%) and A. veronii biovar sobria (28.3%). The strains isolated produced highly active hydrolytic enzymes, haemolytic activity and slime formation in varying proportions. The isolates were also tested for the enterotoxin genes (act, alt and ast), haemolytic toxins (hlyA and aerA), involved in type 3 secretion system (TTSS: ascV, aexT, aopP, aopO, ascF–ascG, and aopH), and glycerophospholipid-cholesterol acyltransferase (gcat). All isolates were found to be associated with at least one virulent gene. Moreover, they were resistant to frequently used antibiotics for human infections. The study demonstrates the pathogenic potential of Aeromonas, associated with ornamental fish culture systems suggesting the emerging threat to public health

Cartes de fraccions

Resumen tomado de la publicaci??n. Incluye las cartas de los juegos

Caracterización de los hábitos alimentarios en población pediátrica de cuatro instituciones escolares

Introducción: La obesidad infantil ha venido en aumento en los últimos años y Colombia no es ajena a esta problemática. Uno de los lugares para intervención son los planteles educativos, en los cuales los escolares son quienes escogen sus alimentos. En el presente estudio se pretendió caracterizar los hábitos alimentarios de una población pediátrica en cuatro instituciones educativas, con el fin de conocer las prioridades infantiles en cuanto a la escogencia de los alimentos, y por ende generar recomendaciones. Metodología: Se realizó un estudio descriptivo multicéntrico que presenta los resultados de encuestas dirigidas a escolares entre 8 y 18 años, usuarios de tiendas escolares. Se realizó un análisis descriptivo de acuerdo a las preferencias de alimentación por institución, por género y por edad entre otros. Resultados: Se incluyeron un total de 512 escolares. La distribución por género y edad fue similar en las cuatro instituciones educativas. Entre los alimentos de preferencia predominaron los alimentos empaquetados, pizza, helados y en menor proporción las frutas. En cuanto a las bebidas predominó la gaseosa y té en botella. Entre las razones para escoger los alimentos predominó “el sabor” seguido de la “facilidad y rapidez” para su consumo; y la principal razón para no escoger los alimentos fue el precio. Discusión: Es necesario hacer intervención desde una temprana edad para generar hábitos de alimentación saludable y equilibrada, al igual que se debería tener un programa de detección de hábitos alimentarios inadecuados en las instituciones escolares para así poder combatirlos.

El Llibre dels Feits matem??tics : les matem??tiques en temps del rei En Jaume

Resumen basado en el de la publicaci??n