The rural architect : consisting of various designs for country buildings, accompanied with ground plans, estimates and descriptions /

Published as a follow-up to the author's Designs for cottages, cottage farms, and other rural buildings, including entrance gates and lodges, also published by Harding in 1805.

The assessment of change in rural landscape and the analysis of the driving forces. Proposal of a spatial model for the rural built environment

The presented study carried out an analysis on rural landscape changes. In particular the study focuses on the understanding of driving forces acting on the rural built environment using a statistical spatial model implemented through GIS techniques. It is well known that the study of landscape changes is essential for a conscious decision making in land planning. From a bibliography review results a general lack of studies dealing with the modeling of rural built environment and hence a theoretical modelling approach for such purpose is needed. The advancement in technology and modernity in building construction and agriculture have gradually changed the rural built environment. In addition, the phenomenon of urbanization of a determined the construction of new volumes that occurred beside abandoned or derelict rural buildings. Consequently there are two types of transformation dynamics affecting mainly the rural built environment that can be observed: the conversion of rural buildings and the increasing of building numbers. It is the specific aim of the presented study to propose a methodology for the development of a spatial model that allows the identification of driving forces that acted on the behaviours of the building allocation. In fact one of the most concerning dynamic nowadays is related to an irrational expansion of buildings sprawl across landscape. The proposed methodology is composed by some conceptual steps that cover different aspects related to the development of a spatial model: the selection of a response variable that better describe the phenomenon under study, the identification of possible driving forces, the sampling methodology concerning the collection of data, the most suitable algorithm to be adopted in relation to statistical theory and method used, the calibration process and evaluation of the model. A different combination of factors in various parts of the territory generated favourable or less favourable conditions for the building allocation and the existence of buildings represents the evidence of such optimum. Conversely the absence of buildings expresses a combination of agents which is not suitable for building allocation. Presence or absence of buildings can be adopted as indicators of such driving conditions, since they represent the expression of the action of driving forces in the land suitability sorting process. The existence of correlation between site selection and hypothetical driving forces, evaluated by means of modeling techniques, provides an evidence of which driving forces are involved in the allocation dynamic and an insight on their level of influence into the process. GIS software by means of spatial analysis tools allows to associate the concept of presence and absence with point futures generating a point process. Presence or absence of buildings at some site locations represent the expression of these driving factors interaction. In case of presences, points represent locations of real existing buildings, conversely absences represent locations were buildings are not existent and so they are generated by a stochastic mechanism. Possible driving forces are selected and the existence of a causal relationship with building allocations is assessed through a spatial model. The adoption of empirical statistical models provides a mechanism for the explanatory variable analysis and for the identification of key driving variables behind the site selection process for new building allocation. The model developed by following the methodology is applied to a case study to test the validity of the methodology. In particular the study area for the testing of the methodology is represented by the New District of Imola characterized by a prevailing agricultural production vocation and were transformation dynamic intensively occurred. The development of the model involved the identification of predictive variables (related to geomorphologic, socio-economic, structural and infrastructural systems of landscape) capable of representing the driving forces responsible for landscape changes.. The calibration of the model is carried out referring to spatial data regarding the periurban and rural area of the study area within the 1975-2005 time period by means of Generalised linear model. The resulting output from the model fit is continuous grid surface where cells assume values ranged from 0 to 1 of probability of building occurrences along the rural and periurban area of the study area. Hence the response variable assesses the changes in the rural built environment occurred in such time interval and is correlated to the selected explanatory variables by means of a generalized linear model using logistic regression. Comparing the probability map obtained from the model to the actual rural building distribution in 2005, the interpretation capability of the model can be evaluated. The proposed model can be also applied to the interpretation of trends which occurred in other study areas, and also referring to different time intervals, depending on the availability of data. The use of suitable data in terms of time, information, and spatial resolution and the costs related to data acquisition, pre-processing, and survey are among the most critical aspects of model implementation. Future in-depth studies can focus on using the proposed model to predict short/medium-range future scenarios for the rural built environment distribution in the study area. In order to predict future scenarios it is necessary to assume that the driving forces do not change and that their levels of influence within the model are not far from those assessed for the time interval used for the calibration.

Domes of adobe and stone on the rural architecture of centre of Castilla y León (Spain)

In the centre of Castilla y León (extensive zone of Spain) still there are some examples of the old rural buildings linked to the economic activities that have been developed in the agrarian field. These are called chozos and casetas, and they have been erected with domed solutions using the autochthonous materi-als: the mud in the region of Tierra de Campos and the stone in the region of Montes Torozos. The influence of traditional construction techniques of both elements has generated a singular typological range rarely seen in the rest of the Península Ibérica. All different types of domes found in this place will be explained from its construction process, adding its structural capacity and energy bioclimatic qualities. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- En el centro de Castilla y León todavía se mantienen algunos ejemplos de antiguas construcciones rurales vinculadas a las actividades económicas que se han desarrollado en el ámbito agrario. Éstas, conocidas como chozos y casetas, han sido ejecutadas con soluciones cupuliformes empleándose los materiales que más a mano se disponen, siendo el barro más característico en la región de Tierra de Campos y la piedra en la comarca de Montes Torozos. La influencia de las técnicas constructivas tradicionales de ambos elementos ha generado un abanico tipológico singular poco visto en el resto de la península. Los diferentes tipos de cúpulas encontrados se explicarán desde su proceso constructivo, añadiendo su capacidad estructural y sus cualidades bioclimáticas.

Influence of stiffness in bolted connections in wooden plane structure of truss type

Trusses are structural systems commonly used in projects, being employed mainly in roof structures, present in most rural buildings. The design of trusses, as well as other structural systems, requires the determination of displacements, strains and stresses. However, the project is developed from an ideal model of calculation, considering free rotation between the elements of a connection. This paper presents a computer program for the analysis of bidimensional wooden trusses with connections formed with two screws per node. The formulation is based on the flexibility method, taking into account the influence of the effect of semi-rigid connections formed by two screws. An example of a structure is presented and analyzed by the program developed here, highlighting the importance of behavior analysis on semi-rigid connections.

Custo energético de construção de uma instalação para armazenagem de feno

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Comparison of environmental indicators of two aviaries for laying Hens

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Proposta de conector para ensaios de ligações CDE submetidas à tração perpendicular as fibras em madeira de pinus

The growth of urban population associated with the shortage of supply of public infrastructure such as hospitals, kindergartens, schools, among others, has reinforced the need to develop alternative methods that simplify the construction processes and allows for a reduction in these costs works. The conventional processes have increasingly been shown ineffective to solve the problem of demand for different types of urban and rural buildings. Given this fact, industrial construction processes can gain space and have proven to be highly interesting to solve the above problems, in particular, considering the cost-effective and time. Therefore, this study aimed to determine the influence of moisture on the strength of metal plate connections connectors (printed plate with teeth). For the sizing of the links between structural lumber using metal connectors with teeth prints; controlled process variables (drying of the wood and the different moisture contents), and finally found results and compare them with different literatures order to obtain a qualitative efficiency of the process. Some specimens had very low expectations, can be explained by the presence of bone marrow, and pre-existing cracks. Thus, the results were discarded for further analysis and more accurate results

Ricerca di criteri analitico-progettuali per la riqualificazione paesaggistica di strutture e infrastrutture in aziende agricole multifunzionali.

Obiettivo generale dello studio è rivolto alla definizione di linee d’indirizzo volte alla riqualificazione paesaggistica, per l’integrazione ed il recupero delle corti e degli edifici moderni dei centri aziendali agricoli a carattere multifunzionale in territorio rurale, attraverso soluzioni appropriate sia sul piano tecnologico-formale che su quello economico-funzionale. Con riferimento ad un’area studio sovracomunale della provincia di Bologna (Regione Emilia-Romagna), si è determinato, quale obiettivo specifico, l’individuazione delle possibili soluzioni di riqualificazione, da realizzarsi in economia, cioè primariamente attraverso i mezzi e le competenze normalmente disponibili in un’azienda agricola di questo tipo. A seguito del riconoscimento dei caratteri specifici e dei tipi edilizi degli edifici rurali tradizionali nella pianura emiliano romagnola, dell’identificazione delle metodologie d’indagine dei caratteri degli edifici rurali in letteratura, nonché dell’analisi della normativa di riferimento in materia di aziende multifunzionali, sono state definite le aziende studio, appartenenti ad aree geografiche differenti. La metodologia d’indagine individuata è stata condotta per la determinazione delle tipologie costruttive, dei materiali utilizzati e dei requisiti delle aziende, in relazione alle diverse specificità, alla definizione funzionale degli spazi costruiti, degli spazi aperti e delle differenti relazioni fra essi e l’identificazione ed analisi dei percorsi delle diverse tipologie di fruitori. L’identificazione delle criticità dei caratteri architettonici riscontrate, sia negli edifici agricoli sia nella corte, ha condotto al riconoscimento degli ambiti di intervento per la progettazione delle soluzioni di riqualificazione funzionale e paesaggistica, attraverso lo studio delle possibili soluzioni per la schermatura o rivalorizzazione sia degli edifici moderni di servizio all’agricoltura (analizzando le potenzialità progettuali offerte dalle pareti verdi, dai brise soleil, dalle facciate ventilate o da intonaci e tinteggiature), sia per la riqualificazione dei percorsi e degli aspetti paesaggistici (intervenendo sulla proposta di materiali da pavimentazione, e delle essenze da utilizzare), da realizzarsi in economia, ma comparati con alternative proposte di tipo commerciale.

Miglioramento delle performance termiche e energetiche degli edifici rurali: valutazione del retrofit di locali per la conservazione del vino su casi studio

Il presente studio si colloca all’interno di una ricerca più ampia volta alla definizione di criteri progettuali finalizzati all’ottimizzazione delle prestazioni energetiche delle cantine di aziende vitivinicole, di dimensioni produttive medio - piccole. Nello specifico la ricerca riguarda la riqualificazione di fabbricati rurali esistenti di modeste dimensioni, da convertire a magazzini per la conservazione del vino in bottiglia. Lo studio si pone come obiettivo la definizione di criteri di analisi per la valutazione di interventi di retrofit di tali fabbricati, volto sia al miglioramento delle prestazioni energetiche dell’involucro edilizio, sia alla riduzione del fabbisogno energetico legato al funzionamento di eventuali impianti di controllo termico. La ricerca è stata condotta mediante l’utilizzo del software di simulazione termica Energy Plus, per ottenere i valori simulati di temperatura interna relativi ai diversi scenari migliorativi ipotizzati, e mediante la successiva definizione di indicatori che esplicitino l’influenza delle principali variabili progettuali sull’andamento delle temperature interne dei locali di conservazione e sul fabbisogno energetico del fabbricato necessario a garantire l’intervallo di temperatura di comfort del vino. Tra tutti gli interventi possibili per il miglioramento della prestazione energetica degli edifici, quelli analizzati in questo studio prevedono l’aggiunta di un isolamento a cappotto delle pareti esterne, l’isolamento della copertura e l’aggiunta di una struttura ombreggiante vegetale esterna. I risultati ottenuti danno una prima indicazione sugli interventi più efficaci in termini di miglioramento energetico e mettono in luce l’utilità del criterio proposto nell’evidenziare le criticità degli interventi migliorativi ipotizzati. Il metodo definito nella presente ricerca risulta quindi un valido strumento di valutazione a supporto della progettazione degli interventi di retrofit dei fabbricati rurali da convertire a magazzini per la conservazione del vino.

Evolución de la edificación agraria en La Mancha. Materiales, diseño y tipologías

El presente trabajo trata sobre la evolución de las construcciones rurales en una de las mayores regiones españolas, La Mancha. Se analizan básicamente tres puntos: a) Los materiales y sistemas de ejecución. b) Los diseños. c) Como síntesis de las dos anteriores. Las tipologías. Los materiales se estudian por periodos de tiempo, y los diseños por tipo de edificación agraria. Se ha deducido que los edificios más interesantes por su evolución son las bodegas, harineras y almazaras. SUMMARY The present work deals on evolution suffered by rural buildings in one of the larger spanish región, La Mancha. Three different points have been analysed: a) Materials and carrying out systems. b) Designs. c) As a synthesis of the both above, typologys. Materials have been studied by periods of time, designs by type of rural buildings. It has been thought the most interesting buildings, in terms of evolution, are wineries, flour milis and olive-oil milis.

Painéis de partículas de saco de cimento e embalagem longa vida aplicados como forro em protótipos de aviários

No presente trabalho, considerou o estudo do potencial de utilização de sacos de cimento e embalagens de longa vida com o intuito de agregar valor a esses resíduos, mediante a fabricação de painéis de partículas para uso como forro em protótipos de galpões avícolas. Para fabricação desse material foi utilizado sacos de cimento descartados nas obras civis, embalagens longa vida residuais e resina poliuretana bicomponente à base de óleo de mamona. O estudo foi dividido em quatro etapas: 1) Caracterização da matéria-prima (sacos de cimento); 2) Efeito da densidade e teor de resina nas propriedades físicas, mecânicas e térmicas de painéis de partículas de saco de cimento; 3) Avaliação do desempenho de embalagens longa vida e verniz como revestimentos dos painéis selecionados na etapa anterior; 4) Determinação do desempenho térmico de protótipos de aviários executados em escala reduzida e distorcida com forro de painel de saco de cimento e embalagem longa vida. Os resultados obtidos indicaram: Em razão do painel com 0,6 g.cm-3 e 12% de resina ter apresentado melhor desempenho nas propriedades investigadas, essa combinação foi selecionada para avaliar o desempenho do material (físicas, mecânicas e térmicas) quando revestido com embalagens longa vida, adotando a testemunha e o verniz como um revestimento comparativo. Dentre os revestimentos avaliados, os painéis com embalagens de longa vida, foram superiores aos revestidos com verniz, quando comparados as suas propriedades físicas, mecânicas e térmicas. Dessa maneira, painéis com 0,6 g.cm-3 e 12% de resina revestidos embalagens longa vida, foram testados como forro quanto ao desempenho térmico (primavera, verão, outono e inverno) em protótipos em escala reduzida e distorcida, mediante a determinação de índices de conforto térmico (Entalpia e IAPfc) para aves de corte. A associação do forro sob o protótipo permitiu reduzir a temperatura interna do ar e dos índices de conforto térmico na primavera, verão e outono, enquanto que no inverno não foi constatado eficácia do material. Dentre as estações estudadas, o verão e a primavera, demonstraram serem as épocas mais críticas para criação de aves corte em instalações avícolas que apresentem características semelhantes aos protótipos experimentais.

Philadelphia, Pennsylvania, 1750 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: A map of Philadelphia and parts adjacent : with a perspective view of the State-House, by N. Scull and G. Heap. Facsimile of a 1750 map republished by Benj. R. Boggs in 1893. Scale [ca. 1:65,000]. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Pennsylvania South State Plane Coordinate System NAD83 (in Feet) (Fipszone 3702). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, drainage, selected rural buildings with occupants' names, and more. Relief is shown pictorially. Includes text, distance table, ill., and ground-level view of the Statehouse (later Independence Hall). Facsimile of state showing estate of Wm. Allen near Germantown with his name added to the "Table of distances". This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Gillette's map of Oneida Co., New York : from actual surveys /

County cadastral wall map showing towns (townships), numbered town survey divisions, irregular rural property tracts, rural buildings, and rural householders' names.

Rural architecture : being a complete description of farm houses, cottages, and out buildings, comprising wood houses, workshops, tool houses, carriage and wagon houses, stables, smoke and ash houses, ice houses, apiary or bee house, poultry houses, rabbitry, dovecote, piggery, barns and sheds for cattle, &c, &c., &c. : Together with lawns, pleasure grounds and parks; the flower, fruit, and vegetable garden. Also, useful and ornamental domestic animals for the country resident &c.,&c., &c. Also, the best method of conducting water into cattle yards and houses /

Mode of access: Internet.